Journal of Building Pathology and Rehabilitation - v. 9, n. 2 (mai 2024)

Publié:	mai 2024

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
de Paula Costa, Mayara Carelli / Barbosa, Maria Teresa Gomes / de Sá, Renato Ribeiro Corrêa / de Sousa, Clarissa Dias / de Souza, Nelson Luis Gonçalves Dias / Rivelli, Laura Infante	Analysis of the efficiency of adding silica, glass powder, Amazon chestnuts, and biopolymer on the mortar performance
Falah, Mayadah W. / Muteb, Haitham H. / Al-Khafaji, Zainab	Behavior of MSE wall under static load with different strips shapes
Machado, Adryelle Dias Novaes / Siqueira, Anna Luiza Dias / Assumpção de Castro, Júlia / Carvalho, Aldo Ribeiro de / Pita, Romário Parreira / Mendes, Julia Castro	Case study of condominium management in Brazil: survey of 30 years of maintenance and renovation costs of a 1982 multifamily residential building
Havaeji, Saeideh / Ghanizadeh Anganeh, Pouya / Torbat Esfahani, Mehdi / Rezaeihezaveh, Rezvan / Rezaei Moghadam, Afshin	A comparative analysis of machine learning techniques for building cooling load prediction
Vaibhav Sharma, Kul / Sharma, Neha / Sharma, Divas / Gautam, Lilesh	Comparative evaluation of open graded friction course and stone matrix asphalt mixtures with modified binders and warm mix asphalt
Sutar, Abhijeet / Tande, Shrirang	Comparison of interaction study between the double channel and Y-shaped railway sleeper tracks on steel girder railway bridge
Dangi, Tushar / Chand, Jagdish / Sharma, Abhishek	Correction to: Forecasting strength characteristics of concrete incorporating nano‑silica, alccofine and fly ash as partial replacement of cement
Pichaimuthu, Chandru	Corrosion and volume stability of the blended SCC mixes containing induction furnace steel slag and crushed stone as coarse aggregate
Toukal, A. / Labdaoui, R. / Kadri, M.	Damage assessment in RC columns using the energy dissipation of ultrasonic waves
Kowsalya, M. / Sindhu Nachiar, S. / Anandh, S.	Desirability analysis of sustainable concrete containing fly ash cenosphere as fine aggregate replacement using RSM approach
Rama Krishana, A. K. / Mallik, Mainak / Maity, Damodar	Developing an appropriate concrete mix for 3D concrete printing
Tolentino Souza, Alessandra / Silveira Neto, Henrique / Silva Neto, Gilberto Alves da / Caldas, Rodrigo Barreto / dos Santos, White Jose	Dustiness evaluation in different mortars with thermal cure
Maharana, Puravi Priyadarsini / Panda, Swetapadma / Sarkar, Pradip	Ecofriendly concrete production with binary blends of rice husk ash and micro-silica: mechanical strength, durability, and ECM
Ekolu, S. O. / Thomas, T. / Lawrence, W. / De Freitas, L. / van Vuuren, I. / Solomon, F.	Effects of triangular reinforcing on flexural and deformation behaviour of concrete beams
Ebadi-Jamkhaneh, Mehdi	Enhancing cyclic performance of double steel plate shear walls with optimized stiffener configurations
Rakam, Abhinay / Sahu, Sritam Swapnadarshi	Enhancing Flexural Performance of Self-Compacting Concrete Beams Using Fiber-Reinforced Polymer Composites
Karan, Samapika Samadarasani / Das, Manita / pothal, Goutam Kumar / Parida, Lukesh	Enhancing shear behavior of class F fly ash using non-woven carry bags: a sustainable geotechnical solution
Sobuz, Md. Habibur Rahman / Jabin, Jannat Ara / Ashraf, Jawad / Anzum, Md. Tanvir / Shovo, Abu Rayhan / Rifat, Md. Tanvir Rahman / Adnan, Tamim	Enhancing Sustainable Concrete Production by Utilizing Fly Ash and Recycled Concrete Aggregate with Experimental Investigation and Machine Learning Modeling
Silva, T. M. / Nascimento, C. F. G. / Teixeira, I. A. R. / Lima, K. P. B. A. / Fernandes, I. V. / Oliveira, M. C. B. M. / Monteiro, E. C. B. / Melo Neto, A. A. / Delgado, J. M. P. Q.	Enhancing the physical performance of concrete containing construction and demolition waste against the effects of accelerated carbonation and chloride ingression
Nwankwo, Stephen Ikpendu / Nwankwo, Chidiuto Victoria	Evaluating building defects and maintainability of tertiary institutions in Owerri Metropolis, Nigeria
Bhogone, Manjunath V. / Bhusari, Jyoti P. / Obied, Mukhallad Murad	Experimental investigation of reinforced concrete deep beams with openings and strengthened using carbon fiber laminates
Eshghi, Payam / Azadi, Mohammad / Ahmadi, Hadi	Experimental investigation of the effect of nano and micro Fe3O4 on the physical and mechanical properties of clayey soil
Bakka’, Jenrisari Datu / Caronge, Muhammad Akbar / Tjaronge, Muhammad Wihardi	Experimental investigation on flexural strength and environmental performance of concrete prepared with recycled polypropylene plastic as fine aggregate
Kasagani, Hanuma / Srinivas, Chava / Anjaneyula Naik, K. / Teja P., S. R. R. / Phani Swethaswari, S. Sai	An experimental investigation on the corrosion resistance and bond behaviour of concrete reinforced with stainless steel and carbon steel bars – a comparative study
Gaidhankar, Darshan / Bhangale, Mayur / Sathe, Sandeep / Ingle, Ganesh	Exploring the impact of marble waste aggregate on the mechanical, durability, and microstructure properties of concrete with Metakaolin
AlMuhanna, Muath / AlSenan, Rashed / Mustafaraj, Enea / Luga, Erion / Corradi, Marco	Fibre reinforcement of cement mortars for reinforcement of masonry buildings: an experimental investigation
Telichko, Victor / Slavcheva, Galina / Levchenko, Artem	Finite elements procedure for modelling mechanichal behaviour of layered 3D printed concrete elements with experimental validation
Fransozo, Hélder Luís / Lima, Gustavo Filemon Costa / de Gouveia, Antonio Maria Claret / Bezerra, Augusto Cesar da Silva	Fire effects on itacolomi quartzites from stonework historical buildings: implications for conservation of the cultural heritage
Dangi, Tushar	Forecasting strength characteristics of concrete incorporating nano-silica, alccofine and fly ash as partial replacement of cement using artificial neural network
Pathak, Sudhanshu S. / Vesmawala, Gaurang R. / Khandelwal, Rohini / Chavan, Aradhana / Mane, Sachin / Chakraborty, Sharmistha	Fracture assessment of concrete through digital image correlation (DIC) technique
Monsard, Nicolas Isaac / Benchekroun, Sabah	Geochemical and mineralogical characterization of rocks in the vicinity of Tiflet, Morocco: implications for their potential applications
Alnaqbi, Ali / Al-Khateeb, Ghazi / Zeiada, Waleed	A hybrid approach of support vector regression with genetic algorithm optimization for predicting spalling in continuously reinforced concrete pavement
Jena, Shradha / Basa, Bidyadhar / Panda, Kishor Chandra	Impact of various bacteria on concrete properties: an experimental study
Suguna, K. / Raghunath, P. N. / Arun, M. / Karthick, J.	The influence of polyolefin and steel fibres on flexural performance of reinforced concrete beams under cyclic loads
Salah, Mustafa S. / Muteb, Haitham H.	Influence of shear connector type and degree on semi-rigid joints of composite cold-formed steel beam-to-column connections
Suwondo, Riza / Keintjem, Militia	Integrated assessment of embodied carbon and financial costs in simply supported beams
Felix, Emerson F. / Lavinicki, Breno M. / Bueno, Tobias L. G. T. / de Castro, Thiago C. C. / Cândido, Renan A.	Integrating machine learning and Monte Carlo Simulation for probabilistic assessment of durability in RC structures affected by carbonation-induced corrosion
Usta Evci, Pinar / Davraz, Metin / Uysal, Nesibe	Investigation of mechanical properties of Kofke stone used in historical structures in isparta by nondestructive and destructive methods
Jagadeep, K. / Dhevasenaa, P. R. / Sivagamasundari, R. / Jodi, C.	Investigation of mechanical properties of self-compacting concrete induced with zeolite and graphene oxide
Kumar, Pramod / Gogineni, Abhilash / Upadhyay, Rajnikant	Mechanical performance of fiber-reinforced concrete incorporating rice husk ash and recycled aggregates
Yadav, Jitendra Singh / Roy, Amrit Kumar / Shekhawat, Poonam / Kumar, Shubham	Mechanical properties of bentonite soil stabilized with rice husk ash and ground granulated blast furnace slag geopolymer
Kadamba, Siddharth / Blesson, S. / Rao, A. U. / Kamath, Muralidhar / Tantri, Adithya	Mechanical, durability and microstructure properties of self-healing concrete utilizing agro-industrial waste: a critical review
Anusha, M. / Mourougane, R.	Microscale investigation of mechanical characteristics: enhancing sustainable strength in concrete through the use of recycled aggregates
Salama, Abdallah / Ala’ssar, Abdullah / Eraky, Atef / Samir, Rania	A novel approach for predicting the lifetime of corroded reinforced concrete structures
Khan, Mohammad Mohsin / Roy, Amrit Kumar	Numerical investigation of interference effects on tall power station chimney subjecting varying wind incident angles
Bensaid, Chaimaa / Tbatou, Taoufik	Numerical studies on the seismic behavior of reinforced concrete structures Strengthened with CFRP
Alani, Aktham H. / Tayeh, Bassam A. / Megat Johari, Megat Azmi / Majid, T. A.	Optimizing strength behavior of sustainable ultra high performance green concrete with minimum cement content using response surface method
Tanu, H. M. / Unnikrishnan, Sujatha	Performance evaluation and sustainability analysis of geopolymer concrete developed with ground granulated blast furnace slag and sugarcane bagasse ash
Sridhar, Radhika / Aosai, Pakjira / Imjai, Thanongsak / Garcia, Reyes / Shirkol, Anoop / Rahim, Nur Liza	Performance of an EBR CFRP-strengthened RC slab using 24-h and cyclic load tests: a real case study
Paswan, Rajesh Kumar / Gogineni, Abhilash / Sharma, Sanjay / Kumar, Pramod	Predicting split tensile strength in Portland and geopolymer concretes using machine learning algorithms: a comparative study
Islam, Md Mahamodul / Das, Pobithra / Rahman, Md Mahbubur / Naz, Fasiha / Kashem, Abul / Nishat, Mosaraf Hosan / Tabassum, Nujhat	Prediction of compressive strength of high-performance concrete using optimization machine learning approaches with SHAP analysis
Ayoobi, Ahmad Walid / Inceoğlu, Gonca / İnceoğlu, Mehmet	Prioritizing sustainable building design indicators through global SLR and comparative analysis of AHP and SWARA for holistic assessment: a case study of Kabul, Afghanistan
Nanda, Sourav Kumar / Giri, Jyoti Prakash / Priyadarshini, Monalisa	Quantitative evaluation of soil stabilization using RCA and GGBS: a statistical perspective
Khaleel, Yusur Uqba / Qubad, Sava Dlawar / Mohammed, Ahmed Salih / Faraj, Rabar H.	Reinventing concrete: a comprehensive review of mechanical strength with recycled plastic waste integration
AlTawaiha, Haneen	A review on the utilization of E-plastic waste in concrete production: a step towards sustainability
Kumar, Avinash / Jangid, R. S.	Shear strength prediction of CFRP-strengthened deep RC beams without shear reinforcement
Philip, Shimol / Nidhi, M. / Nakkeeran, G.	Soft computing techniques for predicting the compressive strength properties of fly ash geopolymer concrete using regression-based machine learning approaches
Gonçalves, Teresa Diaz / Santos, Teresa O.	State of conservation of an industrial brick masonry chimney: a case-study in Montijo, Portugal
Verma, Abhishek / Murthy, Yogesh Iyer / Singh, Harsh	Steady state chloride diffusivity in mortar containing nano titanium dioxide using response surface methodology
Shareef, Noora Ali / Kadhum, Mohammed Mansour	Strengthening fire damaged light weight high strength reinforced concrete beams through BFRP grid and ECC jackets
Attiyah, Ali N. / Al-Wazni, Saad / Al-Tameemi, Ali A. / Al-Ansari, Luay	Structural evaluation of mass concrete damage: a case study of concrete mill stands
Shahanawaz, G. / Nirupama, PN / Raghavendra, T.	Structural health assessment of overhead water tank - a case study
Kashyap, Rishabh / Saxena, Mukul / Gautam, Arstu / Mishra, Priyanshu / Yadav, Shalu / Jaiswal, Aman / Rajpoot, Avi	A study on enhancing mechanical properties of concrete with steel slag for sustainable construction
Raad Al-Adhadh, Ahmed / Nik Daud, Nik Norsyahariati / Yusuf, Badronnisa / Al-Rkaby, Alaa Hussein	Supplementary cementitious materials in sandy soil improvement: a review
Shakir, Qasim M. / Alghazali, Asmaa F.	Sustainable precast composite deep beams including concrete with partial replacement (50%) of recycled coarse aggregate
Sambre, Tejashri / Endait, Mahesh	Sustainable usage of calcium carbide residue for stabilisation of expansive soils: strength and microstructure analysis
Kalane, Saurabh / Shekokar, Shubhangi / Sathe, Sandeep / Salgude, Rohit	Sustainable use of steel slag as coarse aggregate and its influence on mechanical, durability properties, and microstructure of concrete
Venkatesh, Chava / Mallikarjuna, V. / Mallikarjuna Rao, G. / Patil, Santosh Kalyanrao / kiran, B. Naga / Yashwanth, M. K. / Siva Rama Prasad, C. Venkata / Devi, G. Sree Lakshmi	Synergistic effects of graphene oxide and limestone calcined clay cement on mechanical properties and durability of concrete
Krishnan, Anitha / Subramanian, Senthil Selvan	Torsional strength of reinforced concrete beams with incorporating agricultural waste ash
Rokhsati, Moeinoddin / Mohamadi Dehcheshmeh, Mohamad / Amiri, Gholamreza Ghodrati / Raissi Dehkordi, Morteza	Two-stage structural damage detection using modal strain energy and natural frequencies: Numerical and experimental study
Mesbah, Hicham / Lotfi, Hicham / Tafkirte, Mounir / Banouni, Hicham / Ettahiri, Mohamed / Jagadesh, P. / Faiz, Bouazza	Ultrasonic velocity and density measurement for mortar characterization: Investigation of correlations with mortar porosity and sand grain size
Boukrouh, Naima / Bouchair, Ammar	Urban walkability assessment, a double examination by physical environment and users’ perceptions: The Case of Jijel City in Algeria
Singh, Niranjan / Gupta, Ashish	Use of recycled coarse aggregate for M40 grade concrete

Informations
sur cette fiche
IssueID
74193
Publié(e) le:
20.06.2024
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Journal of Building Pathology and Rehabilitation - v. 9, n. 2 (mai 2024)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Building Pathology and Rehabilitation - v. 9, n. 2 (mai 2024)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.