Journal of Building Engineering - août 2024

Publié:	août 2024

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Houshsadat, S.Zahra / Bararzadeh Ledari, Masoumeh / Dehvari, Hooman / Sahamyan moghaddam, Melika / Hosseini, M.Reza	Aligning Net Zero Energy, Carbon Neutrality, and Regenerative Concepts: An Exemplary Study of Sustainable Architectural Practices	109414
Kryvenko, Pavlo / Rudenko, Igor / Sikora, Pawel / Sanytsky, Myroslav / Konstantynovskyi, Oleksandr / Kropyvnytska, Tetiana	Alkali-activated cements as sustainable materials for repairing building construction: a review	109399
Englart, Sebastian	Analysis of rainwater use in membrane-based semi-direct evaporative cooling of air	109409
Giuffrida, Giada / Ibos, Laurent / Boudenne, Abderrahim / Allam, Hamza	Analysis of the thermal performances of uninsulated and bio-based insulated compressed earth blocks walls: from the material to the wall scale	109370
Niknia, Sepideh / Rashed-Ali, Hazem	Analyzing energy consumption due to occupant interaction with manual and automatic window blinds in multiple climates	109506
Li, Jiannan / Yan, Jian / Zhou, Yiyi / Yang, Shulan / Singh, Amardeep	Analyzing the effects of size and density on the ultimate compressive strength of structural laminated bamboo parallel to the grain	109481
Lima, Thamara Tofeti	Applicability of electrochemical chloride extraction to concrete made with different binders	109484
Taheri-Shakib, Jaber / Al-Mayah, Adil	Applications of X-ray computed tomography to characterize corrosion-induced cracking evolution in reinforced concrete: a review	109420
Suranjan Salins, Sampath / Kumar, Shiva / Reddy, Kota / Sachidananda, H. K. / Shetty, Sawan / Stephen, Clifton / Tejero-González, Ana	Assessment of a sustainable technology-based novel humidifier system	109352
Sanchez, Benjamin / Honic, Meliha / Leite, Fernanda / Herthogs, Pieter / Stouffs, Rudi	Augmenting materials passports to support disassembly planning based on building information modelling standards	109083
Wang, Wei / Rezaeian, Hooman / Roy, Krishanu / Fang, Zhiyuan / Lim, James B. P.	Axial capacity of a novel cold-formed steel swaged section: Experimental tests and design	109494
Cai, Weihan / Liu, Haifeng / Xu, Wenjing / Che, Jialing / Doh, Shu Ing	The bonding performance of desert sand self-compacting concrete overlay on normal strength concrete substrate: Macro, micro, and ultrasonic testing	109502
Nie, Shuang / Guo, Aofei / Feng, Hu / Hu, Qunfang / Huang, Hao	Bonding properties of composite interface composed of concrete/magnesium phosphate cement-based ECC/CFRP plate	109486
Wang, Yi-Sheng / Ishak, Shafiq / Zhang, Guang-Zhu / Wang, Xiao-Yong	Carbonation curing behavior and performance improvement of recycled coral waste concrete	109473
Wang, Siyu / Lin, Chenlong / Li, Shan / Lu, Yiyan	Compressive performance and analytical modeling of early strength seawater sea sand engineered cementitious composites	109282
Sidiq, Amir / Setunge, Sujeeva / Annamalai, Pratheep Kumar / Gravina, Rebecca J. / Giustozzi, Filippo	Concrete self-healing performance using surface roughness parameters: Metrological approach	109433
Abbas, Zainab Hashim / Gorgis, Iqbal N. / Hassan, Maan S.	Cross-sectional shape effect of stay-in-place formwork column on axial compressive behaviour	109417
Zhang, Chao / Zhu, Zhan / Wu, Yunfang / Shen, Xinyu / Liu, Chengtao / Liu, Kun / Yang, Kejia	Cyclic behavior and shear strength of exterior reinforced concrete beam-column joints with inclined columns	109341
Jiang, Zi-qin / Wang, Jun-Jie / Shen, Cun-Jie / Yan, Tian / Su, Lei	Cyclic loading behavior of novel internally stiffened double steel plate shear wall	109462
Shan, Jiazeng / Huang, Chenyu / Wang, Luji / Loong, Cheng Ning	Data-driven prediction of natural period for existing RC high-rise buildings using probabilistic machine learning methods	109394
Yuan, Hao	Developing a Digital Human Modeling Toolset: Simulating Elderly Posture in Grasshopper to Optimize Living Environments	109308
Gong, Ruizhi / Qi, Yanran / Lian, Chenglong / Gao, Xudong / Yao, Fengbiao / Srinivasan, Vennila / Liu, Yiliang / Liu, Baoxuan / Dong, Xiaoying	Developing Poplar Wood into A Green Structure-Decoration Integrated Material for Prefabricated Wooden Building Application	109386
Avşar, Özgür / Cao, Sasa / Ozbulut, Osman E.	Development and characterization of self-centering friction dampers with confined shape memory alloy bars	109504
Huang, Yue / Chen, Qiang / Shang, Huaishuai / Wang, Junhui / Song, Nixia	Development of sustainable ultra-high-performance concrete (UHPC) by synergistic utilization of red mud and limestone powder	109372
Bodur, Burak / Mecit Işık, Muhammet Ahmet / Benli, Ahmet / Bayrak, Barış / Öz, Ali / Bayraktar, Oguzhan Yavuz / Kaplan, Gökhan / Aydın, Abdulkadir Cüneyt	Durability of green rubberized 3D printed lightweight cement composites reinforced with micro attapulgite and micro steel fibers: Printability and environmental perspective	109447
Li, Ping / Yan, Yuhong / Liu, Enming / Li, Shan / Lu, Yiyan / Tai, Caiwang	Dynamic mechanical behavior of steel fiber reinforced-recycled aggregate concrete subjected to uniaxial loading	109385
Guo, Xingguo / Nie, Longhui / Ji, Jiangjun / Chen, Wenhua / Li, Yong / Liu, Xiangwei	Effect of connection methods on hygrothermal performance of prefabricated concrete building walls	109518
Yang, Yan / Lai, Yong / Wu, Kai / Wang, Wuxiang / Fang, Jingrui / Gao, Yun / Yang, Zhenghong	Effect of Cr2O3 on the clinkerization and carbonation properties of γ-C2S	109395
Huang, Wei / He, Lian / Chen, Zhendong / Yin, Jianli / Huang, Qingwei / Chen, Rong / Bian, Xuehai / Liu, Sheng / Xian, Yonggang	Effect of endogenous chloride ion on the corrosion behavior of reinforcement embedded in sea-sand UHPC matrix in different immersion environments	109376
Chen, Weihong / Lin, Boxu / Zheng, Jianfeng / Cui, Shuangshuang / Zhuang, Shusen	Effect of loading level on the corrosion resistance of a novel self-healing cementitious composite	109384
Guíñez, Felipe / Santa María, Hernán / Araya-Letelier, Gerardo / Lincoleo, Jocelyn / Palominos, Fabrizio	Effect of mix dosage on rubberized concrete mechanical performance: A multivariable prediction model towards design provisions	109451
Wu, Yuping / Lu, Jingzhou / Nie, Yanfeng / He, Wenhui	Effect of seashell powder as binder material on the performance and microstructure of low-carbon sustainable alkali-activated concrete	109442
Feng, Fei-Fan / Hwang, Hyeon-Jong / Zhou, Yun / Sun, Jing-Ming / Zhang, Hu-Zhi / Roh, Jun-Ho / Kang, Su-Min / Yi, Wei-Jian	Effect of three-dimensional space on progressive collapse resistance of reinforced concrete frames under various column removal scenarios	109405
Li, Yaxuan / Senthil Kumar, Gokula Manikandan / Cao, Sunliang / Wang, Shengwei	Electric vehicle-based distant energy sharing between zero-emission coastal office and hotel buildings	109496
Wei, Lim Jun / Islam, M. M. / Hasanuzzaman, M. / Cuce, Erdem	Energy consumption, power generation and performance analysis of solar photovoltaic module based building roof	109361
Abazari, Mohammad S. / Entezari, Mohammad H.	Enhance the loss of sound transmission of glass using a thin polyester/silica aerogel composite as a new sound insulation	109437
Cappellesso, Vanessa / Van Mullem, Tim / Gruyaert, Elke / Van Tittelboom, Kim / De Belie, Nele	Enhancing concrete durability in chloride-rich environments through manual application of healing agents	109380
Horma, Othmane / Channouf, Salaheddine / El Hammouti, Aboubakr / El Hassani, Sara / Miri, Hanane / Moussaoui, Mohammed Amine / Mezrhab, Ahmed	Enhancing concrete sustainability using crushed peanut shells: An analysis of thermophysical properties, durability, and application potential in construction	109434
Wu, Tianyi / Wu, Jie / Zheng, Chuji / Wang, Jun	Evaluation of freeze-thaw resistance of geopolymer concrete incorporating GFRP waste powder	109465
Ouyang, Xue / Huang, Yong / Hu, Xiang / Yin, Jian / Shi, Caijun	Evaluation of tensile failure behavior of ultra high performance concrete under double-edge wedge splitting and direct tension loadings	109480
Farouq, Mahmoud Murtala / Mirzaei, Parham A. / Jimenez-Bescos, Carlos / Riffat, Saffa	Experimental and Numerical Study on the Thermal Performance of Earthbag-wall Units Incorporated with Phase Change Materials	109306
Yao, Longyu / Zhang, Wenjie / Huang, Fengcheng / Zhao, Rui / Tang, Kai	Experimental and simulation study on the thermoelectric performance of semi-transparent crystalline silicon photovoltaic curtain walls	109421
Wei, Wenzhe / Feng, Zhenglei / Sun, Yuying / Wang, Wei / Jin, Xinyue / Zhang, Jianfei / Dai, Chuanmin	Experimental investigation on the space heating performance of air source heat pump with vapor injection under frosting condition	109327
Wu, Zhenli / Lu, Xilin / Bao, Hongyin / Li, Lingzhi / Lu, Zhoudao	Experimental response of semi-rigid reinforced concrete beam-column joints with bolted angle dissipating connections	109345
Yang, Xing-Ju / Jiang, You-Han / Lin, Feng	Experimental study on direct shear resistance of horizontal grouted joints in PC shear walls under compression and in-plane bending moment	109419
Wang, Peihan / Xu, Chenyang / Li, Qiuyi / Wang, Liang / Guo, Yuanxin	Experimental study on the preparation of wood aggregate recycled concrete using waste wood and recycled fine aggregate from construction and demolition wastes	109471
Wang, Xuan / Zhao, Wanwan / Zhang, Yaoli / Shi, Jiangtao / Shan, Shuya / Cai, Liping	Exploring wood micromechanical structure: Impact of microfibril angle and crystallinity on cell wall strength	109452
Gholampour, Maysam / Zhang, Ze-Wen / Wang, Chi-Chuan	Extending air-cooled data center emergency cooling duration with phase change material: An experimental study	109439
Yi, Yong / Zhu, Deju / Zillur Rahman, Md / Guo, Shuaicheng / Li, Sheng	A feasibility study of using low-alkalinity seawater sea sand concrete to improve the long-term bond performance of the BFRP bar in the seawater environment	109467
Kuznetsov, G. V. / Volkov, R. S. / Sviridenko, A. S. / Strizhak, P. A.	Fire detection and suppression in rooms with different geometries	109427
Liu, Kaihua / Fu, Kangshen / Sang, Yuan / Yang, Yingzi / Zou, Chaoying / Xie, Tianyu / Zhao, Xinyu	Frost resistance of recycled aggregate concrete: A critical review	109450
Xiong, Tong / Zhao, Tianyang / Liu, Guoqiang / Zhao, Lei / Jin, Junfeng / Gao, Qiang / Yan, Gang	Frosting characteristics of microchannel heat exchangers: Parametric studies and correlation development	109521
Wenting, Yang / Juan, Xu / Beiyang, Xu / Wenjing, Meng / Kai, Yang / Yanjie, Fang	Fuzzy clustering-based climatic zoning method for building climate responsiveness in Qinba region, China	109311
Zhang, Jiaying / Kwok, Helen H. L. / Cheng, Jack C. P.	Heritage building facades preservation: Automatic fresh air curtain wall generation for air pollutant dilution based on digital twins	109358
Wen, Shaoyong / Cao, Mingli / Liu, Guangzhao	High-strength high-ductility seawater sea-sand Engineered Cementitious Composites: Mechanical properties, cracking behavior and micro-mechanics	109404
Raffaele, Lorenzo / Bruno, Luca / Laccone, Francesco / Venuti, Fiammetta / Tomei, Valentina	Holistic performance assessment of gridshells: Methodological framework and applications to steel gridshells	109406
Aryan Tabar, Masoud / Ahmadi Jirdehi, Mehdi / Shaterabadi, Mohammad	Impact of bi-facial PV panels’ presence as the novel option on the energy management and scheduling of the interconnected grids: Comprehensive outlook	109495
Jiang, Lu / Li, Jinrou / Zheng, Yingsheng	The impact of thermal comfort requirements on household heating energy consumption	109426
Shi, Luo-Ke / Li, Peng-Cheng / Liu, Chang-Ru / Zhu, Jia-Xu / Zhang, Tian-Hao / Xiong, Gang	An improved tensile strength and failure mode prediction model of FDM 3D printing PLA material: Theoretical and experimental investigations	109389
Zhang, Ling / Wang, Shichen / Yang, Guokun / Luo, Huiyuan / Lai, Hourun / Liu, Tianle	Improving freeze resistance of cement-based materials with modified graphite-paraffin composite low-temperature microencapsulated phase change materials	109456
Wang, Junjie / Guo, Jiatong / Su, Jixiang / Huang, Rong / Xu, Lei / Chen, Siyi / Chen, Xiaogang / Tang, Huiyu / Wang, Yuli / Xiang, Dong / Wu, Shenghua	Improving the bonding performance of new and old cement pastes by high-temperature treatment on the surface of old cement pastes	109482
Fu, Wanzhang / Li, Xiaoguang / Wang, Panqi / Xu, Tao / Zhou, Jing / Liang, Kun / Wang, Xu / Liu, Mingsheng	Improving the mechanical performance of concrete by graphene nanoplatelets (GNP) enrichment in the interfacial transition zone (ITZ)	109373
Jain, Ankur / Surana, Mitesh	IN-PLAN DISTRIBUTION OF PEAK FLOOR ACCELERATION DEMANDS IN TORSIONALLY IRREGULAR BUILDINGS	109360
Li, Zhenxia / Guo, Tengteng / Chen, Yuanzhao / Fang, Chenze / Chang, Yangming / Nie, Jiaxin	Influence of basalt fiber and polypropylene fiber on the mechanical and durability properties of cement-based composite materials	109335
Kriegl, Adam J. / Svecova, Dagmar	Influence of thermal fatigue cycles on concrete cold joints	109493
Omur, Tarik / Kanat, Derya / Kabay, Nihat	Innovative use of hazelnut shell ash as an alkali activator: A comparative analysis with commercial activators	109466
Choi, Bo-Hye / Song, Seung-Yeong	Insulation performance evaluation of stone-finished exterior insulation systems with insulation frames for green remodeling of concrete exterior walls	109412
Wang, Yicheng / Sun, Yimin / Lu, Peijun / Berta, Mauro	An integrated climate-based daylight performance evaluation framework for indoor arenas' roof system	109164
Zhang, Senlong / Liu, JieSheng / Duan, Shixue / Du, Liwei / Zhang, Zhiyu / Zhang, Man / Jiang, Dongcheng / Wu, Xinyao	Investigation into the Strength and Toughness of Polyvinyl Alcohol Fiber-Reinforced Fly Ash-Based Geopolymer Composites	109371
Kaur, Harsimranpreet / Kulthaweepisit, Natthawat / Nhat Ho Tran, Trinh / Jaturapitakkul, Chai / Tangchirapat, Weerachart	Investigation of strength and water permeability of sustainable high-performance concrete containing high-volume ground bottom ash blended with fly ash and nano-silica	109428
Zhang, Danni / Zhang, Lei / Zhang, Yu	Investigation of the indoor CO2 removal efficiency and fresh air energy savings of living walls in office spaces	109422
Qian, Rusheng / Wan-Wendner, Lin / Yang, Chengqi / Zhao, Ruze / Ye, Zhibo / Kong, Deyu / Zhang, Yong	Investigations on carbon-sequestration optimization of recycled coarse-aggregate and its effects on concrete performances	109453
Xu, Wenxiang / Fu, Junliang / Hua, Runyang / Han, Fangyu	ITZ volume fraction and thermal conductivity of concrete: A unified random packing model for gravels and crushed rocks	109457
Chen, Lijie / Huang, Zhenyu / Pan, Wei / Su, Ray K. L. / Zhong, Ying / Zhang, Yi	Low carbon concrete for prefabricated modular construction in circular economy: an integrated approach towards sustainability, durability, cost, and mechanical performances	109368
Zhen, Qi / Zhang, Anxiao / Bokel, Regina / Zheng, Yue / Li, Jing / Du, Yiming / Zhang, Qi	A Markov chain-based approach for assessing respiratory infection risk in a multi-zone office building	109328
Du, Sizhe / Liang, Bo / Zhang, Yu / Lei, Chuang / Wang, Chenxin / Jin, Zhuoyang / Li, Bo / Li, Xinqian / Liu, Yuanzhen	Mechanical properties and damage characteristics analysis on recycled aggregate concrete with glazed hollow beads after high temperatures by acoustic emission method	109429
Jin, Libing / Wang, Zhenhao / Wu, Tian / Liu, Peng / Zhou, Pin / Zhu, Doudou / Wang, Xu	Mesoscale-based mechanical parameters determination and compressive properties of fully recycled coarse aggregate concrete	109366
Yang, Zhiyuan / Zhan, Xiewei / Zhu, Hong / Zhang, Bai / Lu, Fei / Dong, Zhiqiang	Mesoscopic investigation of the matrix pores and ITZ effects on the mechanical properties of seawater sea-sand coral aggregate concrete	109375
Pozzobon, Victor	Microalgae bio-reactive façade: A radiative-convective model powered by hourly illumination computation and historical weather data	109407
Li, Jing / Chen, Dongbin / Yu, Kangfeng / Zhang, Shuai / Cao, Wenxiang / Yi, Chaofan / Lv, Xuesen / Cui, Xuemin / He, Yan / Chen, Zheng	Mix design and performance of low-carbon alkali-activated slag/bagasse ash cementitious materials	109468
Song, Xiaoyan / Cheng, Xiaowei / Li, Yi / Guo, Ruijie / Zhang, Haoyou / Liang, Zihan / Wang, Senna	A numerical model database for rapid seismic damage assessment of typical regular reinforced concrete frame structures in urban building clusters	109392
Oinam, Yanchen / Dahal, Mandip / Mesfin, Minwuye / Park, Solmoi / Kim, Hyeong-Ki / Pyo, Sukhoon	On improved microstructure properties of slag-based UHPC incorporating calcium formate and calcium chloride	109551
Nithin, A. V. / Raj S., Deepa / Soman, Mini	Optimizing the compressive strength of low-grade hydrous clay and copper slag‐based sustainable ternary blended geopolymer mortar	109431
Liu, Qingrong / Li, Yunqi / Xu, Tingting / Qian, Fanyue / Meng, Hua / Yao, Yuting / Ruan, Yingjun	Peak shaving potential and its economic feasibility analysis of V2B mode	109271
Das, Anupam / Banerjee, Arnab / Sahoo, Dipti Ranjan / Matsagar, Vasant	Performance comparison of linear and nonlinear compliant liquid dampers-inerter in controlling across-wind response of benchmark tall building	109400
Shahsavar, Amin / Azimi, Neda	Performance evaluation and multi-objective optimization of a hybrid earth-air heat exchanger and building-integrated photovoltaic/thermal system with phase change material and exhaust air heat recovery	109531
Chantit, Farah / El Abbassi, Fatima-Ezzahra / Kchikach, Azzouz	Performance of compressed earth bricks reinforced with sugar industrial by-products bagasse and molasse: Mechanical, physical and durability properties	109403
Ghosh, Sudipta / Sinha, Subhrajit / Samanta, Amiya Kumar	Performance of recycled refractory brick fine aggregate on diverse properties of Portland slag cement based heat resistant concrete	109458
Ni, Guanhua / Fu, Zhenglin / Li, Zhao / Sun, Gongshuai / Zhang, Xiangfei / Wang, Gang / Wang, Zhenyang / Liu, Yixin / Xu, Chuanhua	Performance study of new lightweight cementitious composites with glass beads as filler	109477
Htet, Paing / Chen, Wensu / Huang, Zhijie / Hao, Hong	Physical and mechanical properties of deflection-hardening hybrid fibre-reinforced recycled aggregate concrete	109510
Abdellatief, Mohamed / Ahmed, Yasser M. / Taman, Mohamed / Elfadaly, Ezzat / Tang, Yunchao / Abadel, Aref A.	Physico-mechanical, thermal insulation properties, and microstructure of geopolymer foam concrete containing sawdust ash and egg shell	109374
Xiang, Yu / Zhao, Haitao / Hu, Dongkang / Hu, Nan / Chen, Junyu / Xu, Wen	Pore structure development of cementitious materials with manufactured sand from various lithologies and differential effect of CaO–MgO blend expansion agent	109498
Athira, V. S. / Lekshmi, Sreedevi / Sharanya, A. G. / Tripathi, Abhishek / Manohar, Swathy	Potential application of bio-admixtures in synthesizing traditional lime binders- A comprehensive review	109464
Zhao, Zengfeng / Liu, Yajie / Lu, Yanyun / Ji, Chenyuan / Lin, Can / Yao, Lei / Pu, Ziying / de Brito, Jorge	Prediction of properties of recycled aggregate concrete using machine learning models: A critical review	109516
Sun, Daosheng / Hu, Huiying / Ma, Rui / Hu, Xun / Ding, Yi / Wang, Aiguo / Liu, Kaiwei	Preparation and hydration of low-carbon UHPC with high fraction of activated tuff and recycled fine powders	109396
Qu, Tao / Zeng, Bin / Zhou, Zhen / Huang, Linjie	Progressive collapse resistance of local prestressed concrete sub-structures: Numerical analysis and theoretical verification	109430
Yang, Jin / Zhai, Gaoyuan / He, Xingyang / Tang, Yuanzhen / Su, Ying / Yu, Xiaolei / Zeng, Jingyi / Wang, Fulong	Properties and microstructure of a low-carbon clinker-free cementitious binder and its extrusion-based printing performance	109483
Alharthai, Mohammad / Othuman Mydin, Md Azree / Kaze, Rodrigue Cyriaque / Majeed, Samadar S. / Tayeh, Bassam A.	Properties of Ultra Lightweight Foamed Concrete Utilizing Agro Waste Ashes as an Alkaline Activated Material	109347
Li, Xiuming / Li, Mengyi / Zhang, Yingbo / Han, Zongwei / Wang, Shengwei	Rack-level cooling technologies for data centers – A comprehensive review	109535
Wu, Ziyan / Zhang, Wenhao / Tang, Rui / Wang, Huilong / Korolija, Ivan	Reinforcement learning in building controls: A comparative study of algorithms considering model availability and policy representation	109497
Shen, Zijie / Zhang, Yu / Zhou, Guangchun / Guo, Lanhui / Wu, Zhenyu	Revealing the phase transition of steel frames with CFST columns during progressive collapse process from a thermodynamic perspective	109448
Wang, Bin / Karavasilis, Theodore L. / Chen, Peng / Dai, Kaoshan	Seismic modeling and performance evaluation of seismically isolated building considering large strain effects under near-fault earthquakes	109339
Miao, Zhiwei / Yuan, Hao / Liu, Yifan / Geng, Xiangdong	Seismic performance analysis of coastal reinforced concrete frames considering the pitting corrosion in the longitudinal reinforcement bars	109478
Zou, Kai / Wang, Licheng	Self-healing efficiency of later-age cracked microbial mortar embedded with unencapsulated microorganisms under long-term water and ambient exposure conditions	109454
Igbokwe, Emmanuel / Ibekwe, Samuel / Mensah, Patrick / Agu, Ogad / Li, Guoqiang	Self-healing of Macroscopic Cracks in Concrete by Cellulose Fiber Carried Microbes	109383
Sun, Fengpeng / Li, Longhao / Bian, Dunxin / Ji, Hua / Li, Naiqing / Wang, Shuang	Short-term PV power data prediction based on improved FCM with WTEEMD and adaptive weather weights	109408
Kirimtat, Ayca / Manioğlu, Gülten	A simulation-based performance evaluation of new generation dynamic shading devices with multi-objective optimization	109322
Zhang, Hai Yan / Jiang, Wei An / Wu, Bo	Size effect of compressive performance of concrete under elevated temperatures: Tests and meso-scale analysis	109449
Zhang, Jianwei / Zhang, Man / Liu, Xiao / Sun, Yuping	Structural behavior of steel tube reinforced resilient RAC shear walls under static cyclic loading	109432
Ibrahim, Haitham A. / Elawady, Amal / Prevatt, David O.	Structural Performance and Fragility Assessment of Elevated Residential Buildings During 2017-2018 Hurricanes in Texas and Florida	109393
Song, Zihao / Lei, Yujie / Ran, Wenting / Yuan, Man / Shang, Sisi / Cui, Sheng	Structural properties and barrier performance of low-cost aerogel composites for building insulation	109485
Cheng, Yanzhe / Xie, Songgao / Yang, Mingxin / Ma, Yao / He, Yang / Zheng, Sheng	A Study on Natural Ventilation of Dormitories for College Students in Northeast China during Spring: A Case of Linear-Shaped Dormitory Buildings	109402
Zhang, Liangyi / Zhou, Tiegang / Zhang, Zaiyu / Tao, Hui / Tan, Wei / Liang, Zengfei	Study on the bond-slip behavior between steel bar and rammed earth	109441
Gao, Shuling / Zhang, Shilin / Jing, Xiaokun	Study on the effect of strain rate on the bond performance between GFRP bars and ECC after seawater freeze-thaw cycles	109387
Wang, Fei / Li, Hui / Qiao, Zhigang / Li, Yuchen / Zheng, Wukui / Gou, Yujin / Qi, Yongle	Study on the encapsulation effect and mechanism of hollow ceramsite to phase change materials (PCMs)	109470
Wang, Debin / Pang, Ran / Fan, Guoxi / Wang, Gang	Study on the mechanical properties of a viscoelastic self-centering brace with rotational displacement amplification and its application in RC frames	109472
Liu, Juanhong / Guo, Lingzhi / Xi, Yayun / Cheng, Linian / Chen, Deping	Study on the rheology, mechanical properties and microstructure of polypropylene fibers in different binder systems	109491
Emami Kian, Nima / Aminian, Javad	Techno-economic and environmental feasibility study of MILD combustion in domestic utility boilers under partial load operation	109425
Wang, Liguo / Wang, Yuncheng / Miao, Yanchun / Ju, Siyi / Sui, Shiyu / Wang, Fengjuan / Liu, Zhiyong / Jiang, Jinyang	Temperature damage assessment of mass concrete based on the coupling mechanism of hydration-temperature-humidity-constraint factors	109211
Liu, Hongtao / Chen, Wenxiao / Guo, Ruojiao / Liao, Weizhang / Du, Xiuli	Theoretical and numerical study on the bond behavior between reinforcing steel and concrete	109398
Talaei, Maryam / Sangin, Hamed	Thermal comfort, daylight, and energy performance of envelope-integrated algae-based bioshading and static shading systems through multi-objective optimization	109435
Yu, Feng / Wang, Jialiang / Dong, Sufen / Ding, Siqi / Han, Baoguo	Understanding the effect of non-carbon-based nanoinclusions on chloride penetration resistance and chloride binding capacity of ultra-high performance cementitious composite	109460
Lin, Ya-Wen / Zhang, Bo-Xuan / Lin, Cheng-Han / Chen, Yi-Hong / Lin, Kae-Long	Using industrial waste in porous building materials for indoor humidity control	109362
Klemczak, Barbara / Gołaszewski, Jacek / Cygan, Grzegorz / Gołaszewska, Małgorzata / Jonkers, Henk / Zhilyaev, Dmitry / Koenders, Eduardus A. B.	Utilization of waste foam concrete with MPCM as a substitution material for cement in mortars	109284
Othman, Murnira / Latif, Mohd Talib / Abd Hamid, Haris Hafizal / Abu Bakar, Nor Hidayu / Mohamad, Nur Husna / Haron, Nur Farahiyah / Noraini, Nor Mohd Razif	Variability and health impact of air pollutants and bioaerosols in multi-functional indoor environments with mechanical ventilation system	109436
Liu, Yanrong / Nan, Xiaohong / Han, Han / Li, Jie	The variable water temperature control strategy of the air-source heat pump compatible with floor heating system for an apartment	109440
Kumar, Aman / Arora, Harish Chandra / Nehdi, Moncef L.	XGBoost Algorithm Based Estimation of Near Surface Mounted FRP Rod-to-Concrete Bond Strength and Failure Mode	109418

Informations
sur cette fiche
IssueID
72221
Publié(e) le:
25.04.2024
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Journal of Building Engineering - août 2024

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Building Engineering - août 2024

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.