Journal of Building Engineering - janvier 2020

Publié:	janvier 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Coşkun, Gültekin / Sariisik, Gencay	Analysis of slip safety risk by portable floor slipperiness tester in state institutions	100953
Kaasalainen, Tapio / Mäkinen, Antti / Lehtinen, Taru / Moisio, Malin / Vinha, Juha	Architectural window design and energy efficiency: Impacts on heating, cooling and lighting needs in Finnish climates	100996
Shahpari, Maryam / Mehdizadeh Saradj, Fatemeh / Pishvaee, Mir Saman / Piri, Saeid	Assessing the productivity of prefabricated and in-situ construction systems using hybrid multi-criteria decision making method	100979
Sathiparan, Navaratnarajah	An assessment of building vulnerability to a tsunami in the Galle coastal area, Sri Lanka	100952
Vummadisetti, Sudhir / Singh, S. B.	Buckling and postbuckling response of hybrid composite plates under uniaxial compressive loading	101002
Krishnan, Sudarshan	Cable-stayed columns and their applications in building structures	100984
Khemakhem, Siwar / Rekik, Mouna / Krichen, Lotfi	A collaborative energy management among plug-in electric vehicle, smart homes and neighbors’ interaction for residential power load profile smoothing	100976
Hidalgo-Cordero, Juan Fernando / García-Ortuño, Teresa / García-Navarro, Justo	Comparison of binderless boards produced with different tissues of totora (Schoenoplectus californicus (C.A. Mey) Soják) stems	100961
Tavares, João / Silva, Ana / de Brito, Jorge	Computational models applied to the service life prediction of External Thermal Insulation Composite Systems (ETICS)	100944
Ranade, Akshay / Provan, Gregory / El-Din Mady, Alie / O'Sullivan, Dominic	A computationally efficient method for fault diagnosis of fan-coil unit terminals in building Heating Ventilation and Air Conditioning systems	100955
Younis, Adel / Ebead, Usama / Suraneni, Prannoy / Nanni, Antonio	Cost effectiveness of reinforcement alternatives for a concrete water chlorination tank	100992
Alam, Md Ashraful / Onik, Shahnawaz Ahmed / Mustapha, Kamal Nasharuddin Bin	Crack based bond strength model of externally bonded steel plate and CFRP laminate to predict debonding failure of shear strengthened RC beams	100943
Das, Sneha / Narula, Pankaj / Sarkar, Kaustav	Design of intermittent rainfall-pattern for structures with gridded data: Validation and implementation	100939
Yu, Wei / Wang, Lexiang / Wang, Qingqin / Wang, Xiaofei / Li, Guozhu / Wang, Junliang / Awbi, Hazim	Design selection and evaluation method of PM2.5 filters for fresh air systems	100977
Thamboo, Julian Ajith / Zahra, Tatheer / Dhanasekar, Remadevi	Development of design methodology for mortarless masonry system: Case study – a resettlement housing colony	100973
Banyhussan, Qais S. / Hanoon, Ammar N. / Al-Dahawi, Ali / Yıldırım, Gürkan / Abdulhameed, Ali A.	Development of gravitational search algorithm model for predicting packing density of cementitious pastes	100946
Mo, Kim Hung / Hussin, Muhammad Nadzmi / Ling, Tung-Chai / Sulong, N. H. Ramli / Lee, Foo Wei / Yuen, Choon Wah	Development of lightweight aggregate mortar skin layer for an innovative sandwich concrete composite	100941
Reddy, A. Suchith / Kumar, P. Rathish / Anand Raj, P.	Development of Sustainable Performance Index (SPI) for Self-Compacting Concretes	100974
Ouda, Ahmed S. / Gharieb, Mahmoud	Development the properties of brick geopolymer pastes using concrete waste incorporating dolomite aggregate	100919
Chauhan, Rajeev Kumar / Chauhan, Kalpana / Subrahmanyam, B. Ravi / Singh, Avanish Gautam / Garg, Man Mohan	Distributed and centralized autonomous DC microgrid for residential buildings: A case study	100978
Benítez, Pablo / Rocha, Eugénio / Varum, Humberto / Rodrigues, Fernanda	A dynamic multi-criteria decision-making model for the maintenance planning of reinforced concrete structures	100971
Shen, Jingchun / Copertaro, Benedetta / Sangelantoni, Lorenzo / Zhang, Xingxing / Suo, Hua / Guan, Xinxin	An early-stage analysis of climate-adaptive designs for multi-family buildings under future climate scenario: Case studies in Rome, Italy and Stockholm, Sweden	100972
Papavasileiou, Georgios S. / Charmpis, Dimos C.	Earthquake-resistant buildings with steel or composite columns: Comparative assessment using structural optimization	100988
Devi, S. C. / Khan, R. A.	Effect of graphene oxide on mechanical and durability performance of concrete	101007
Anjos, Marcos A. S. / Camões, Aires / Campos, Pedro / Azeredo, Givanildo A. / Ferreira, Ruan L. S.	Effect of high volume fly ash and metakaolin with and without hydrated lime on the properties of self-compacting concrete	100985
Donmez Cavdar, Ayfer	Effect of zeolite as filler in medium density fiberboards bonded with urea formaldehyde and melamine formaldehyde resins	101000
Ghajarkhosravi, Mahssa / Huang, Yirong / Fung, Alan S. / Kumar, Rakesh / Straka, Vera	Energy benchmarking analysis of multi-unit residential buildings (MURBs) in Toronto, Canada	100981
Saaly, Maryam / Bobko, Kiril / Maghoul, Pooneh / Kavgic, Miroslava / Holländer, Hartmut	Energy performance of below-grade envelope of an institutional building in cold regions	100911
Zanetti, Ettore / Aprile, Marcello / Kum, Dongsuk / Scoccia, Rossano / Motta, Mario	Energy saving potentials of a photovoltaic assisted heat pump for hybrid building heating system via optimal control	100854
Sugár, Viktória / Talamon, Attila / Horkai, András / Kita, Michihiro	Energy saving retrofit in a heritage district: The case of the Budapest	100982
Mohammadhosseini, Hossein / Tahir, Mahmood Md / Alaskar, Abdulaziz / Alabduljabbar, Hisham / Alyousef, Rayed	Enhancement of strength and transport properties of a novel preplaced aggregate fiber reinforced concrete by adding waste polypropylene carpet fibers	101003
Chewe Ngapeya, Gelen Gaël / Waldmann, Danièle	Experimental and analytical analysis of the load-bearing capacity Pu of improved dry-stacked masonry	100927
Xu, Chengxiang / Liu, Xiaoqiang / Zha, Xinfeng / Peng, Sheng	Experimental research on seismic damage of a full-web SRC frame structure	100959
ouldkhaoua, Younes / Benabed, Benchaa / Abousnina, Rajab / Kadri, El-Hadj	Experimental study on the reuse of cathode ray tubes funnel glass as fine aggregate for developing an ecological self-compacting mortar incorporating metakaolin	100951
Azim, Iftikhar / Yang, Jian / Bhatta, Sanjeev / Wang, Feiliang / Liu, Qing-feng	Factors influencing the progressive collapse resistance of RC frame structures	100986
Yas, Zinah / Jaafer, Kamal	Factors influencing the spread of green building projects in the UAE	100894
Gong, Mingju / Bai, Yin / Qin, Juan / Wang, Jin / Yang, Peng / Wang, Sheng	Gradient boosting machine for predicting return temperature of district heating system: A case study for residential buildings in Tianjin	100950
Guna, Vijaykumar / Ilangovan, Manikandan / Rather, Muzamil Hassan / Giridharan, B. V. / Prajwal, B. / Vamshi Krishna, K. / Venkatesh, Krishna / Reddy, Narendra	Groundnut shell / rice husk agro-waste reinforced polypropylene hybrid biocomposites	100991
Hassan, Muhammad Ammad / Usman, Muhammad / Hanif, Asad / Farooq, Syed Hassan / Ahmed, Jamil	Improving structural performance of timber wall panels by inexpensive FRP retrofitting techniques	101004
Dey, Abhijeet / Miyani, Ghanshyam / Debroy, Sudipta / Sil, Arjun	In-situ NDT investigation to estimate degraded quality of concrete on existing structure considering time-variant uncertainties	101001
Iqbal Qureshi, M. Zahid / Chan, A. L. S.	Influence of eddy viscosity parameterisation on the characteristics of turbulence and wind flow: Assessment of steady RANS turbulence model	100934
Rehman, Munib Ul / Ahmad, Madiha / Rashid, Khuram	Influence of fluxing oxides from waste on the production and physico-mechanical properties of fired clay brick: A review	100965
Hosan, Anwar / Shaikh, Faiz Uddin Ahmed	Influence of nano-CaCO3 addition on the compressive strength and microstructure of high volume slag and high volume slag-fly ash blended pastes	100929
Abd Alla, Sara / Bianco, Vincenzo / Tagliafico, Luca A. / Scarpa, Federico	An innovative approach to local solar energy planning in Riva Trigoso, Italy	100968
Carretero-Ayuso, Manuel J. / Sáez-Pérez, María Paz	Interaction and diagnosis of climatological factors in deficiencies in construction units outside buildings	100947
Huang, Zefeng / Gou, Zhonghua / Cheng, Bin	An investigation of outdoor thermal environments with different ground surfaces in the hot summer-cold winter climate region	100994
Rafinazari, Amir / Hadjisophocleous, George	An investigation of the effect of make-up air velocity on smoke layer height with asymmetric openings and rotational air flow in atrium fires	100933
Güçlüer, Kadir	Investigation of the effects of aggregate textural properties on compressive strength (CS) and ultrasonic pulse velocity (UPV) of concrete	100949
Ahmad Zawawi, Muhammad Nazrin Akmal / Muthusamy, Khairunisa / Abdul Majeed, Anwar P. P. / Muazu Musa, Rabiu / Albshir Budiea, Ahmed Mokhtar	Mechanical properties of oil palm waste lightweight aggregate concrete with fly ash as fine aggregate replacement	100924
Hadj aissa, Yacine / Goual, Idriss / Benabed, Benchaa	Mix-design and properties of self-compacting concrete made with calcareous tuff	100997
Alsalman, Ali / Dang, Canh N. / Martí-Vargas, José R. / Hale, W. Micah	Mixture-proportioning of economical UHPC mixtures	100970
Arends, T. / Ruijten, P. / Pel, L.	Moisture-induced bending of an oak board exposed to bilateral humidity fluctuations	100957
Zoriyeh, Hosein / Erdem, Savaş / Gürbüz, Ezgi / Bozbey, Ilknur	Nano-clay modified high plasticity soil as a building material: Micro-structure linked engineering properties and 3D digital crack analysis	101005
Cristofaro, M. T. / Viti, S. / Tanganelli, M.	New predictive models to evaluate concrete compressive strength using the SonReb method	100962
Tur, Viktar V. / Derechennik, Stanislav S.	Non-parametric evaluation of the characteristic in-situ concrete compressive strength	100938
Carretero-Ayuso, Manuel J. / Moreno-Cansado, Alberto / García-Sanz-Calcedo, Justo	Occurrence of faults in water installations of residential buildings: An analysis based on user complaints	100958
Noor-E-Khuda, Sarkar / Dhanasekar, Manicka	On the out-of-plane flexural design of reinforced masonry walls	100945
Jarrahi, H. / Asadi, A. / Khatibinia, M. / Etedali, S.	Optimal design of rotational friction dampers for improving seismic performance of inelastic structures	100960
Rosti, Behnam / Omidvar, Amir / Monghasemi, Nima	Optimal insulation thickness of common classic and modern exterior walls in different climate zones of Iran	100954
Assaad, Joseph J. / Nasr, Dana / Chwaifaty, Stephanie / Tawk, Tarek	Parametric study on polymer-modified pigmented cementitious overlays for colored applications	101009
Aboutabikh, M. / Soliman, A. M. / El Naggar, M. H.	Performance of hollow bar micropiles using green grout incorporating treated oil sand waste	100964
Casnedi, Ludovica / Cappai, Marta / Cincotti, Alberto / Delogu, Francesco / Pia, Giorgio	Porosity effects on water vapour permeability in earthen materials: Experimental evidence and modelling description	100987
Mortazavi, M. / Sharafi, P. / Kildashti, K. / Samali, B.	Prefabricated hybrid steel wall panels for mid-rise construction in seismic regions	100942
Patel, Dhirendra / Shrivastava, R. / Tiwari, R. P. / Yadav, R. K.	Properties of cement mortar in substitution with waste fine glass powder and environmental impact study	100940
Carrillo, Julian / Pincheira, José A. / Flores, Leonardo E.	Quasi-static cyclic tests of confined masonry walls retrofitted with mortar overlays reinforced with either welded-wire mesh or steel fibers	100975
Pradhan, Nischal P. N. / Paraskeva, Themelina S. / Dimitrakopoulos, Elias G.	Quasi-static reversed cyclic testing of multi-culm bamboo members with steel connectors	100983
Xie, Shuai / Ji, Zhijiang / Zhu, Liancheng / Zhang, Jinjun / Cao, Yanxin / Chen, Jihao / Liu, Ruirui / Wang, Jing	Recent progress in electromagnetic wave absorption building materials	100963
Motaghian, Shahrooz / Pasdarshahri, Hadi	Regeneration energy analysis and optimization in desiccant wheels using purge mechanism	100980
Elizondo-Martínez, Eduardo-Javier / Andrés-Valeri, Valerio-Carlos / Jato-Espino, Daniel / Rodriguez-Hernandez, Jorge	Review of porous concrete as multifunctional and sustainable pavement	100967
Elnour, Mariam / Meskin, Nader / Al-Naemi, Mohammed	Sensor data validation and fault diagnosis using Auto-Associative Neural Network for HVAC systems	100935
Pavan, G. S. / Ullas, S. N. / Nanjunda Rao, K. S.	Shear behavior of cement stabilized rammed earth assemblages	100966
Niu, Runping / Kuang, Daqing / Wang, Shizheng / Chen, Xiaoyi	Simulation and experimental studies on the liquid desiccant dehumidification of horizontal tubes having a staggered arrangement	100931
Peeters, M. / Compernolle, T. / Van Passel, S.	Simulation of a controlled water heating system with demand response remunerated on imbalance market pricing	100969
Cheong, Kang Hao / Teo, Ya Hui / Koh, Jin Ming / Acharya, U. Rajendra / Man Yu, Simon Ching	A simulation-aided approach in improving thermal-visual comfort and power efficiency in buildings	100936
Limami, Houssame / Manssouri, Imad / Cherkaoui, Khalid / Khaldoun, Asmae	Study of the suitability of unfired clay bricks with polymeric HDPE & PET wastes additives as a construction material	100956
Neves, Rebecca / Cho, Heejin / Zhang, Jian	Techno-economic analysis of geothermal system in residential building in Memphis, Tennessee	100993
O'Hegarty, Richard / Reilly, Aidan / West, Roger / Kinnane, Oliver	Thermal investigation of thin precast concrete sandwich panels	100937
Rafsanjani, Hamed Nabizadeh / Ghahramani, Ali	Towards utilizing internet of things devices for understanding individual occupants' energy usage of personal and shared appliances in office buildings	100948
Duarte, R. / Flores-Colen, I. / de Brito, J. / Hawreen, A.	Variability of in-situ testing in wall coating systems - Karsten tube and moisture meter techniques	100998

Informations
sur cette fiche
IssueID
33709
Publié(e) le:
02.10.2019
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Journal of Building Engineering - janvier 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Building Engineering - janvier 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.