Journal of Building Engineering - juillet 2019

Publié:	juillet 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Beltrán, R. David / Martínez-Gómez, Javier	Analysis of phase change materials (PCM) for building wallboards based on the effect of environment	100726
Chylík, Roman / Fladr, Josef / Bílý, Petr / Trtík, Tomáš / Vráblík, Lukáš	An analysis of the applicability of existing shrinkage prediction models to concretes containing steel fibres or crumb rubber	100729
Bruno, Roberto / Bevilacqua, Piero / Arcuri, Natale	Assessing cooling energy demands with the EN ISO 52016-1 quasi-steady approach in the Mediterranean area	100740
Shuqin, Chen / Minyan, Lu / Hongwei, Tan / Xiaoyu, Luo / Jian, Ge	Assessing sustainability on Chinese university campuses: Development of a campus sustainability evaluation system and its application with a case study	100747
Guenanou, Farida / Khelafi, Hamid / Aattache, Amel	Behavior of perlite-based mortars on physicochemical characteristics, mechanical and carbonation: Case of perlite of Hammam Boughrara	100734
Alves, Raul / Faria, Paulina / Brás, Ana	Brita Lavada – An eco-efficient decorative mortar from Madeira Island	100756
Matarneh, Sandra T. / Danso-Amoako, Mark / Al-Bizri, Salam / Gaterell, Mark / Matarneh, Rana	Building information modeling for facilities management: A literature review and future research directions	100755
Farsäter, Karin / Strandberg, Paulien / Wahlström, Åsa	Building status obtained before renovating multifamily buildings in Sweden	100723
Kim, Amy A. / Wang, Shuoqi / McCunn, Lindsay J.	Building value proposition for interactive lighting systems in the workplace: Combining energy and occupant perspectives	100752
Seng, Billy / Magniont, Camille / Lorente, Sylvie	Characterization of a precast hemp concrete block. Part II: Hygric properties	100579
Seng, Billy / Magniont, Camille / Lorente, Sylvie	Characterization of a precast hemp concrete. Part I: Physical and thermal properties	100540
Huang, Zirui / Chen, Zhongfan / Huang, Dongsheng / Chui, Ying-Hei	Cyclic loading behavior of an innovative semi-rigid connection for engineered bamboo-steel hybrid frames	100754
Latif, Madiha / Nasir, Ali	Decentralized stochastic control for building energy and comfort management	100739
Mangkuto, Rizki A. / Dewi, Deasty Kusuma / Herwandani, Annisa Azalia / Koerniawan, Mochamad Donny	Design optimisation of internal shading device in multiple scenarios: Case study in Bandung, Indonesia	100745
Darwish, Eman A. / Mansour, Yasser / Elmously, Hamed / Abdelrahman, Amr	Development of sustainable building components utilizing date palm midribs for light wide-span multi-purpose structures for rural communities in Egypt	100770
Tasri, Adek / Susilawati, Anita	Effect of cooling water temperature and space between cooling pipes of post-cooling system on temperature and thermal stress in mass concrete	100731
Bot, Karol / Ramos, Nuno M. M. / Almeida, Ricardo M. S. F. / Pereira, Pedro F. / Monteiro, Cláudio	Energy performance of buildings with on-site energy generation and storage – An integrated assessment using dynamic simulation	100769
Nguyen, Hoang-Anh	Enhancement of engineering properties of slag-cement based self-compacting mortar with dolomite powder	100738
Gonçalves, Miriana / Silvestre, José Dinis / de Brito, Jorge / Gomes, Raul	Environmental and economic comparison of the life cycle of waterproofing solutions for flat roofs	100710
Mavrokapnidis, Dimitris / Mitropoulou, Chara Ch. / Lagaros, Nikos D.	Environmental Assessment of Cost Optimized Structural Systems in Tall Buildings	100730
Riaz, Muhammad Hassan / Khitab, Anwar / Ahmed, Sajjad	Evaluation of sustainable clay bricks incorporating Brick Kiln Dust	100725
D'Agostino, Diana / de' Rossi, Filippo / Marigliano, Marcello / Marino, Concetta / Minichiello, Francesco	Evaluation of the optimal thermal insulation thickness for an office building in different climates by means of the basic and modified "cost-optimal" methodology	100743
Zawam, Mohamed / Soudki, Khaled / West, Jeffrey S.	Factors affecting the time-dependent behaviour of GFRP prestressed concrete beams	100715
Shimizu, Takafumi / Yoshitani, Kimie	Impact-reduction effect of tatami floor mat made of nonwoven fabric for head injuries in fall accidents	100728
van Zijl, Gideon P. A. G. / de Jager, Dirk J. A.	Improved ductility of SHCC retrofitted unreinforced load bearing masonry via a strip-debonded approach	100722
Rincón, Lídia / Carrobé, Ariadna / Martorell, Ingrid / Medrano, Marc	Improving thermal comfort of earthen dwellings in sub-Saharan Africa with passive design	100732
Seo, Jihye / Won, Deokhee / Kim, Seungjun / Kang, Young Jong	Inelastic compressive buckling behavior of a cylindrical shell at elevated temperature: Case study	100766
Sudhakar, K. / Jenkins, Matthew S. / Mangal, Shivy / Priya, S. Shanmuga	Modelling of a solar desiccant cooling system using a TRNSYS-MATLAB co-simulator: A review	100749
Javid, Atiye Soleimani / Aramoun, Fereshteh / Bararzadeh, Masoomeh / Avami, Akram	Multi objective planning for sustainable retrofit of educational buildings	100759
Ighravwe, Desmond Eseoghene / Oke, Sunday Ayoola	A multi-criteria decision-making framework for selecting a suitable maintenance strategy for public buildings using sustainability criteria	100753
Jafarinejad, Tohid / Shafii, Mohammad Behshad / Roshandel, Ramin	Multistage recovering ventilated air heat through a heat recovery ventilator integrated with a condenser-side mixing box heat recovery system	100744
Nadji Maachi, Ismahan / Mokhtari, Abdelrahmane / Slimani, Mohamed El-Amine	The natural lighting for energy saving and visual comfort in collective housing: A case study in the Algerian building context	100760
Syed, Ali Muslim / Hachem, Caroline	Net-zero energy design and energy sharing potential of Retail - Greenhouse complex	100736
Tien, Paige Wenbin / Calautit, John Kaiser	Numerical analysis of the wind and thermal comfort in courtyards "skycourts" in high rise buildings	100735
Pachideh, Ghasem / Gholhaki, Majid / Moshtagh, Amin	On the post-heat performance of cement mortar containing silica fume or Granulated Blast- Furnace Slag	100757
Park, Benjamin / Krarti, Moncef	Optimal control strategies for hollow core ventilated slab systems	100762
Baglivo, Cristina / Congedo, Paolo Maria	Optimization of high efficiency slab-on-ground floor by multi-objective analysis for zero energy buildings in mediterranean climate	100733
Sormunen, Petri / Kärki, Timo	Recycled construction and demolition waste as a possible source of materials for composite manufacturing	100742
Arora, Sumit / Singh, Balraj / Bhardwaj, Bavita	Strength performance of recycled aggregate concretes containing mineral admixtures and their performance prediction through various modeling techniques	100741
Tsiptsis, Ioannis N. / Liimatainen, Lassi / Kotnik, Toni / Niiranen, Jarkko	Structural optimization employing isogeometric tools in Particle Swarm Optimizer	100761
Keykha, Amir Hamzeh	Structural performance evaluation of deficient steel members strengthened using CFRP under combined tensile, torsional and lateral loading	100746
Xu, Chengcheng / Li, Shuhong / Zou, Kaikai	Study of heat and moisture transfer in internal and external wall insulation configurations	100724
Kong, Ling-peng / Qiao, Lan / Xiao, Yun-yang / Li, Qing-wen	A study on heat transfer characteristics and pile group influence of enhanced heat transfer energy piles	100768
Edwards, Rodger E. / Lou, Eric / Bataw, Anas / Kamaruzzaman, Syahrul Nizam / Johnson, Christopher	Sustainability-led design: Feasibility of incorporating whole-life cycle energy assessment into BIM for refurbishment projects	100697
Chan, Daniel W. M.	Sustainable building maintenance for safer and healthier cities: Effective strategies for implementing the Mandatory Building Inspection Scheme (MBIS) in Hong Kong	100737
Tran, Khiem Quang / Satomi, Tomoaki / Takahashi, Hiroshi	Tensile behaviors of natural fiber and cement reinforced soil subjected to direct tensile test	100748
Tinsley, J. / Pavía, S.	Thermal performance and fitness of glacial till for rammed earth construction	100727
Gwynne, Steven M. V. / Hunt, Aoife L. E. / Thomas, J. Russell / Thompson, Alexandra J. L. / Séguin, Lisette	The toilet paper: Bathroom dwell time observations at an airport	100751
Sepahvand, Mostafa Fathi / Akbari, Jalal	Toward seismic design of tall steel moment resisting frames using the theory of plastic mechanism control	100750

Informations
sur cette fiche
IssueID
28272
Publié(e) le:
05.03.2019
Modifié(e) le:
26.07.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Journal of Building Engineering - juillet 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Building Engineering - juillet 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.