Journal of Building Engineering - janvier 2019

Publié:	janvier 2019

Auteur(s)	Titre	Page(s)
Ozturk, Murat / Bankir, Muzeyyen Balcikanli / Bolukbasi, Omer Saltuk / Sevim, Umur Korkut	Alkali activation of electric arc furnace slag: Mechanical properties and micro analyzes	97-105
Sartori, Thais / Calmon, João Luiz	Analysis of the impacts of retrofit actions on the life cycle energy consumption of typical neighbourhood dwellings	158-172
Almusaed, Amjad / Almssad, Asaad / Alasadi, Asaad	Analytical interpretation of energy efficiency concepts in the housing design process from hot climate	254-266
Ladipo, Oluwateniola / Reichard, Georg / McCoy, Andrew / Pearce, Annie / Knox, Paul / Flint, Madeleine	Attributes and metrics for comparative quantification of disaster resilience across diverse performance mandates and standards of building	446-454
Basu, Dhiman	Back-of-the-Envelope analysis of plan-asymmetric confined masonry buildings for force-based seismic design	455-467
Chauhan, Rajeev Kumar / Chauhan, Kalpana	Building automation system for grid-connected home to optimize energy consumption and electricity bill	409-420
Krejcirikova, Barbora / Ottosen, Lisbeth M. / Kirkelund, Gunvor M. / Rode, Carsten / Peuhkuri, Ruut	Characterization of sewage sludge ash and its effect on moisture physics of mortar	396-403
Raheem, A. A. / Ige, A. I.	Chemical composition and physicomechanical characteristics of sawdust ash blended cement	404-408
Bassier, Maarten / Van Genechten, Bjorn / Vergauwen, Maarten	Classification of sensor independent point cloud data of building objects using random forests	468-477
Martins, Juliana Arrobas / Gomes, Carlos Marmorato / Fontanini, Patricia / Dornelles, Kelen	Comparative analysis on thermal performance of MgO and fiber cement boards applied to light steel frame building systems	312-316
Mohotti, D. / Wijesooriya, K. / Dias-Da-Costa, D.	Comparison of Reynolds Averaging Navier-Stokes (RANS) turbulent models in predicting wind pressure on tall buildings	1-17
Sharma, Ashutosh / Mittal, Hemant / Gairola, Ajay	Detached-eddy simulation of interference between buildings in tandem arrangement	129-140
Bhatnagar, Mayank / Mathur, Jyotirmay / Garg, Vishal	Development of reference building models for India	267-277
Duan, Zhiyin / Zhao, Xudong / Liu, Jingjing / Zhang, Qunli	Dynamic simulation of a hybrid dew point evaporative cooler and vapour compression refrigerated system for a building using EnergyPlus	287-301
Balaji, N. C. / Mani, Monto / Venkatarama Reddy, B. V.	Dynamic thermal performance of conventional and alternative building wall envelopes	373-395
Husain, Dilawar / Prakash, Ravi	Ecological footprint reduction of built envelope in India	278-286
Meena, Khushboo / Luhar, Salmabanu	Effect of wastewater on properties of concrete	106-112
Veselý, Michal / Kramer, Rick / Zeiler, Wim	Energy performance of personalized heating: Numerical case study for a medium sized office building including different envelope qualities and climates	113-119
Aslani, Alireza / Bakhtiar, Asieh / Akbarzadeh, Mohammad Hadi	Energy-efficiency technologies in the building envelope: Life cycle and adaptation assessment	55-63
Sandanayake, Malindu / Zhang, Guomin / Setunge, Sujeeva	Estimation of environmental emissions and impacts of building construction – A decision making tool for contractors	173-185
Leite, M. B. / Santana, V. M.	Evaluation of an experimental mix proportion study and production of concrete using fine recycled aggregate	243-253
Bellido-Montesinos, Pablo / Lozano-Galant, Fidel / Castilla, Francisco Javier / Lozano-Galant, Jose Antonio	Experiences learned from an international BIM contest: Software use and information workflow analysis to be published in: Journal of Building Engineering	149-157
Chu, Wen-Xiao / Hsu, Chang-Sheng / Tsui, Yeng-Yung / Wang, Chi-Chuan	Experimental investigation on thermal management for small container data center	317-327
Xuan, Zhou / Xuehui, Zi / Liequan, Liang / Zubing, Fan / Junwei, Yan / Dongmei, Pan	Forecasting performance comparison of two hybrid machine learning models for cooling load of a large-scale commercial building	64-73
Jareemit, Daranee / Limmeechokchai, Bundit	Impact of homeowner's behaviours on residential energy consumption in Bangkok, Thailand	328-335
Meghdadaian, Mohammad / Ghalehnovi, Mansour	Improving seismic performance of composite steel plate shear walls containing openings	336-342
Al-Fakih, Amin / Mohammed, Bashar S. / Liew, Mohd Shahir / Nikbakht, Ehsan	Incorporation of waste materials in the manufacture of masonry bricks: An update review	37-54
Kameni Nematchoua, Modeste / Ricciardi, Paola / Orosa, José A. / Asadi, Somayeh / Choudhary, Ruchi	Influence of indoor environmental quality on the self-estimated performance of office workers in the tropical wet and hot climate of Cameroon	141-148
Nardi, Iole / Perilli, Stefano / de Rubeis, Tullio / Sfarra, Stefano / Ambrosini, Dario	Influence of insulation defects on the thermal performance of walls. An experimental and numerical investigation	355-365
Pauzi, N. N. M. / Jamil, M. / Hamid, R. / Abdin, A. Z. / Zain, M. F. M.	Influence of spherical and crushed waste Cathode-Ray Tube (CRT) glass on lead (Pb) leaching and mechanical properties of concrete	421-428
Faye, Mactar / Lartigue, Berangere / Kane, Souleye	Influence of structural and thermophysical parameters of insulating aggregates on the effective thermal conductivity of lightweight concrete	74-81
Sameer, H. / Bringezu, Stefan	Life cycle input indicators of material resource use for enhancing sustainability assessment schemes of buildings	230-242
Danish, Mir Sayed Shah / Senjyu, Tomonobu / Ibrahimi, Abdul Matin / Ahmadi, Mikaeel / Howlader, Abdul Motin	A managed framework for energy-efficient building	120-128
Fouad, M. M. / Shihata, Lamia A. / Mohamed, A. H.	Modeling and analysis of Building Attached Photovoltaic Integrated Shading Systems (BAPVIS) aiming for zero energy buildings in hot regions	18-27
Al Qablan, Husam / Rababeh, Shaher / Katkhuda, Hasan / Al-Qablan, Tamara	On the use of wooden beams as an anti-seismic device in stone masonry in Qasr el-Bint, Petra, Jordan	82-96
Li, Bo / Wild, Peter / Rowe, Andrew	Performance of a heat recovery ventilator coupled with an air-to-air heat pump for residential suites in Canadian cities	343-354
Ramdani, Samiha / Guettala, Abdelhamid / Benmalek, M. L. / Aguiar, José B.	Physical and mechanical performance of concrete made with waste rubber aggregate, glass powder and silica sand powder	302-311
Masoudzadeh, Fatemeh / Jamshidi, Masoud / Fasihi, Mohammad	Preparation and application of cellulose nano whiskers (CNWs) in engineered cementitious composites	213-221
Barros, José / Santa-Maria, Hernan	Seismic design of low-rise buildings based on frequent earthquake response spectrum	366-372
Adhikari, Ashim / Rao, K. Rama Mohan / Gautam, Dipendra / Chaulagain, Hemchandra	Seismic vulnerability and retrofitting scheme for low-to-medium rise reinforced concrete buildings in Nepal	186-199
Sharif, Seyed Amirhosain / Hammad, Amin	Simulation-Based Multi-Objective Optimization of institutional building renovation considering energy consumption, Life-Cycle Cost and Life-Cycle Assessment	429-445
Luzi, M. / Vaccarini, M. / Lemma, M.	A tuning methodology of Model Predictive Control design for energy efficient building thermal control	28-36
Boussaba, Lisa / Makhlouf, Said / Foufa, Amina / Lefebvre, Gilles / Royon, Laurent	vegetable fat: A low-cost bio-based phase change material for thermal energy storage in buildings	222-229
D'Agostino, Delia / Mazzarella, Livio	What is a Nearly zero energy building? Overview, implementation and comparison of definitions	200-212

Auteur(s)

Titre

Page(s)

Ozturk, Murat / Bankir, Muzeyyen Balcikanli / Bolukbasi, Omer Saltuk / Sevim, Umur Korkut

Alkali activation of electric arc furnace slag: Mechanical properties and micro analyzes

97-105

Sartori, Thais / Calmon, João Luiz

Analysis of the impacts of retrofit actions on the life cycle energy consumption of typical neighbourhood dwellings

158-172

Almusaed, Amjad / Almssad, Asaad / Alasadi, Asaad

Analytical interpretation of energy efficiency concepts in the housing design process from hot climate

254-266

Ladipo, Oluwateniola / Reichard, Georg / McCoy, Andrew / Pearce, Annie / Knox, Paul / Flint, Madeleine

Attributes and metrics for comparative quantification of disaster resilience across diverse performance mandates and standards of building

446-454

Basu, Dhiman

Back-of-the-Envelope analysis of plan-asymmetric confined masonry buildings for force-based seismic design

455-467

Chauhan, Rajeev Kumar / Chauhan, Kalpana

Building automation system for grid-connected home to optimize energy consumption and electricity bill

409-420

Krejcirikova, Barbora / Ottosen, Lisbeth M. / Kirkelund, Gunvor M. / Rode, Carsten / Peuhkuri, Ruut

Characterization of sewage sludge ash and its effect on moisture physics of mortar

396-403

Raheem, A. A. / Ige, A. I.

Chemical composition and physicomechanical characteristics of sawdust ash blended cement

404-408

Bassier, Maarten / Van Genechten, Bjorn / Vergauwen, Maarten

Classification of sensor independent point cloud data of building objects using random forests

468-477

Martins, Juliana Arrobas / Gomes, Carlos Marmorato / Fontanini, Patricia / Dornelles, Kelen

Comparative analysis on thermal performance of MgO and fiber cement boards applied to light steel frame building systems

312-316

Mohotti, D. / Wijesooriya, K. / Dias-Da-Costa, D.

Comparison of Reynolds Averaging Navier-Stokes (RANS) turbulent models in predicting wind pressure on tall buildings

1-17

Sharma, Ashutosh / Mittal, Hemant / Gairola, Ajay

Detached-eddy simulation of interference between buildings in tandem arrangement

129-140

Bhatnagar, Mayank / Mathur, Jyotirmay / Garg, Vishal

Development of reference building models for India

267-277

Duan, Zhiyin / Zhao, Xudong / Liu, Jingjing / Zhang, Qunli

Dynamic simulation of a hybrid dew point evaporative cooler and vapour compression refrigerated system for a building using EnergyPlus

287-301

Balaji, N. C. / Mani, Monto / Venkatarama Reddy, B. V.

Dynamic thermal performance of conventional and alternative building wall envelopes

373-395

Husain, Dilawar / Prakash, Ravi

Ecological footprint reduction of built envelope in India

278-286

Meena, Khushboo / Luhar, Salmabanu

Effect of wastewater on properties of concrete

106-112

Veselý, Michal / Kramer, Rick / Zeiler, Wim

Energy performance of personalized heating: Numerical case study for a medium sized office building including different envelope qualities and climates

113-119

Aslani, Alireza / Bakhtiar, Asieh / Akbarzadeh, Mohammad Hadi

Energy-efficiency technologies in the building envelope: Life cycle and adaptation assessment

55-63

Sandanayake, Malindu / Zhang, Guomin / Setunge, Sujeeva

Estimation of environmental emissions and impacts of building construction – A decision making tool for contractors

173-185

Leite, M. B. / Santana, V. M.

Evaluation of an experimental mix proportion study and production of concrete using fine recycled aggregate

243-253

Bellido-Montesinos, Pablo / Lozano-Galant, Fidel / Castilla, Francisco Javier / Lozano-Galant, Jose Antonio

Experiences learned from an international BIM contest: Software use and information workflow analysis to be published in: Journal of Building Engineering

149-157

Chu, Wen-Xiao / Hsu, Chang-Sheng / Tsui, Yeng-Yung / Wang, Chi-Chuan

Experimental investigation on thermal management for small container data center

317-327

Xuan, Zhou / Xuehui, Zi / Liequan, Liang / Zubing, Fan / Junwei, Yan / Dongmei, Pan

Forecasting performance comparison of two hybrid machine learning models for cooling load of a large-scale commercial building

64-73

Jareemit, Daranee / Limmeechokchai, Bundit

Impact of homeowner's behaviours on residential energy consumption in Bangkok, Thailand

328-335

Meghdadaian, Mohammad / Ghalehnovi, Mansour

Improving seismic performance of composite steel plate shear walls containing openings

336-342

Al-Fakih, Amin / Mohammed, Bashar S. / Liew, Mohd Shahir / Nikbakht, Ehsan

Incorporation of waste materials in the manufacture of masonry bricks: An update review

37-54

Kameni Nematchoua, Modeste / Ricciardi, Paola / Orosa, José A. / Asadi, Somayeh / Choudhary, Ruchi

Influence of indoor environmental quality on the self-estimated performance of office workers in the tropical wet and hot climate of Cameroon

141-148

Nardi, Iole / Perilli, Stefano / de Rubeis, Tullio / Sfarra, Stefano / Ambrosini, Dario

Influence of insulation defects on the thermal performance of walls. An experimental and numerical investigation

355-365

Pauzi, N. N. M. / Jamil, M. / Hamid, R. / Abdin, A. Z. / Zain, M. F. M.

Influence of spherical and crushed waste Cathode-Ray Tube (CRT) glass on lead (Pb) leaching and mechanical properties of concrete

421-428

Faye, Mactar / Lartigue, Berangere / Kane, Souleye

Influence of structural and thermophysical parameters of insulating aggregates on the effective thermal conductivity of lightweight concrete

74-81

Sameer, H. / Bringezu, Stefan

Life cycle input indicators of material resource use for enhancing sustainability assessment schemes of buildings

230-242

Danish, Mir Sayed Shah / Senjyu, Tomonobu / Ibrahimi, Abdul Matin / Ahmadi, Mikaeel / Howlader, Abdul Motin

A managed framework for energy-efficient building

120-128

Fouad, M. M. / Shihata, Lamia A. / Mohamed, A. H.

Modeling and analysis of Building Attached Photovoltaic Integrated Shading Systems (BAPVIS) aiming for zero energy buildings in hot regions

18-27

Al Qablan, Husam / Rababeh, Shaher / Katkhuda, Hasan / Al-Qablan, Tamara

On the use of wooden beams as an anti-seismic device in stone masonry in Qasr el-Bint, Petra, Jordan

82-96

Li, Bo / Wild, Peter / Rowe, Andrew

Performance of a heat recovery ventilator coupled with an air-to-air heat pump for residential suites in Canadian cities

343-354

Ramdani, Samiha / Guettala, Abdelhamid / Benmalek, M. L. / Aguiar, José B.

Physical and mechanical performance of concrete made with waste rubber aggregate, glass powder and silica sand powder

302-311

Masoudzadeh, Fatemeh / Jamshidi, Masoud / Fasihi, Mohammad

Preparation and application of cellulose nano whiskers (CNWs) in engineered cementitious composites

213-221

Barros, José / Santa-Maria, Hernan

Seismic design of low-rise buildings based on frequent earthquake response spectrum

366-372

Adhikari, Ashim / Rao, K. Rama Mohan / Gautam, Dipendra / Chaulagain, Hemchandra

Seismic vulnerability and retrofitting scheme for low-to-medium rise reinforced concrete buildings in Nepal

186-199

Sharif, Seyed Amirhosain / Hammad, Amin

Simulation-Based Multi-Objective Optimization of institutional building renovation considering energy consumption, Life-Cycle Cost and Life-Cycle Assessment

429-445

Luzi, M. / Vaccarini, M. / Lemma, M.

A tuning methodology of Model Predictive Control design for energy efficient building thermal control

28-36

Boussaba, Lisa / Makhlouf, Said / Foufa, Amina / Lefebvre, Gilles / Royon, Laurent

vegetable fat: A low-cost bio-based phase change material for thermal energy storage in buildings

222-229

D'Agostino, Delia / Mazzarella, Livio

What is a Nearly zero energy building? Overview, implementation and comparison of definitions

200-212

Publicité

Journal of Building Engineering - janvier 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Building Engineering - janvier 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.