Journal of Building Engineering - décembre 2015

Publié:	décembre 2015

Auteur(s)	Titre	Page(s)
Salehi, M. Mahdi / Terim Cavka, Belgin / Frisque, Andrea / Whitehead, Derek / Bushe, W. Kendal	A case study: The energy performance gap of the Center for Interactive Research on Sustainability at the University of British Columbia	127-139
Giaretton, Marta / Dizhur, Dmytro / Da Porto, Francesca / Ingham, Jason	Constituent material properties of New Zealand unreinforced stone masonry buildings	75-85
Paiva, H. / Velosa, A. / Cachim, P. / Ferreira, V. M.	Correlation between mortar and concrete behavior using rheological analysis	177-188
Rockwood, David / da Silva, Julia Teles / Olsen, Søren / Robertson, Ian / Tran, Tuan	Design and prototyping of a FRCC modular and climate responsive affordable housing system for underserved people in the pacific island nations	268-282
Tadeu, S. / Rodrigues, C. / Tadeu, A. / Freire, F. / Simões, N.	Energy retrofit of historic buildings: Environmental assessment of cost-optimal solutions	167-176
Pundir, Aakanksha / Garg, Mridul / Singh, Randhir	Evaluation of properties of gypsum plaster-superplasticizer blends of improved performance	223-230
Costigan, Adrian / Pavía, Sara / Kinnane, Oliver	An experimental evaluation of prediction models for the mechanical behavior of unreinforced, lime-mortar masonry under compression	283-294
Natarajan, Sukumar / Rodriguez, Juan / Vellei, Marika	A field study of indoor thermal comfort in the subtropical highland climate of Bogota, Colombia	237-246
Corinaldesi, Valeria / Donnini, Jacopo / Nardinocchi, Alessandro	The influence of calcium oxide addition on properties of fiber reinforced cement-based composites	14-20
Jorne, Fernando / Henriques, Fernando M. A. / Baltazar, Luis G.	Influence of superplasticizer, temperature, resting time and injection pressure on hydraulic lime grout injectability. Correlation analysis between fresh grout parameters and grout injectability	140-151
Afshinnia, Kaveh / Poursaee, Amir	The influence of waste crumb rubber in reducing the alkali–silica reaction in mortar bars	231-236
Henriksen, Thomas / Lo, Stephen / Knaack, Ulrich	An innovative approach to manufacture thin-walled glass fibre reinforced concrete for tomorrow's architectural buildings envelopes with complex geometries	189-199
Felkner, Juliana / Chatzi, Eleni / Kotnik, Toni	Interactive truss design using Particle Swarm Optimization and NURBS curves	60-74
Pirasaci, Tolga	Investigation of laminar natural convection heat transfer within tubular daylighting devices for winter conditions	52-59
Thirumalini, S. / Ravi, R. / Sekar, S. K. / Nambirajan, M.	Knowing from the past – Ingredients and technology of ancient mortar used in Vadakumnathan temple, Tirussur, Kerala, India	101-112
Kostopanagiotis, Christos / Kopanos, Markos / Ioakim, Dennis / Perros, Kyriakos / Lagaros, Nikos D.	Low cost CPU–GPGPU parallel computing in real-world structural engineering	209-222
Hassan, Assem A. A. / Ismail, Mohamed K. / Mayo, Justin	Mechanical properties of self-consolidating concrete containing lightweight recycled aggregate in different mixture compositions	113-126
Clementi, F. / Quagliarini, E. / Maracchini, G. / Lenci, S.	Post-World War II Italian school buildings: typical and specific seismic vulnerabilities	152-166
Häkkinen, Tarja / Kuittinen, Matti / Ruuska, Antti / Jung, Nusrat	Reducing embodied carbon during the design process of buildings	1-13
Singh, S. B. / Munjal, Pankaj / Thammishetti, Nikesh	Role of water/cement ratio on strength development of cement mortar	94-100
Tena-Colunga, Arturo / Pérez-Rocha, Luis Eduardo / Avilés, Javier / Cordero-Macías, Cuauhtémoc	Seismic isolation of buildings for power stations considering soil-structure interaction effects	21-40
Chauhan, Shailendra Singh / Rajput, S. P. S.	Thermodynamic analysis of the evaporative-vapour compression based combined air conditioning system for hot and dry climatic conditions	200-208
Akadiri, Peter Oluwole	Understanding barriers affecting the selection of sustainable materials in building projects	86-93
Corinaldesi, V. / Moriconi, G.	Use of synthetic fibers in self-compacting lightweight aggregate concretes	247-254
Lechowska, Agnieszka / Schnotale, Jacek	The window edge-of-glass region temperature profile improvement by inserting a small additional glass pane—a CFD study and measurements	41-51

Auteur(s)

Titre

Page(s)

Salehi, M. Mahdi / Terim Cavka, Belgin / Frisque, Andrea / Whitehead, Derek / Bushe, W. Kendal

A case study: The energy performance gap of the Center for Interactive Research on Sustainability at the University of British Columbia

127-139

Giaretton, Marta / Dizhur, Dmytro / Da Porto, Francesca / Ingham, Jason

Constituent material properties of New Zealand unreinforced stone masonry buildings

75-85

Paiva, H. / Velosa, A. / Cachim, P. / Ferreira, V. M.

Correlation between mortar and concrete behavior using rheological analysis

177-188