Journal of Building Engineering - mai 2017

Publié:	mai 2017

Auteur(s)	Titre	Page(s)
Fokaides, P. A. / Panayidou, A. / Hadjichristos, C. / Phocas, M. C.	Application of non-linear programming to optimize buildings' solar exposure	127-133
Tena-Colunga, Arturo / Urbina-Californias, Luis Angel / Archundia-Aranda, Hans I.	Assessment of the shear strength of continuous reinforced concrete haunched beams based upon cyclic testing	187-204
Evola, G. / Gagliano, A. / Marletta, L. / Nocera, F.	Controlled mechanical ventilation systems in residential buildings: Primary energy balances and financial issues	96-107
Liu, Changyu / Wu, Yangyang / Li, Dong / Zhou, Yingming / Wang, Zhiguo / Liu, Xiaoyan	Effect of PCM thickness and melting temperature on thermal performance of double glazing units	87-95
Donatelli, A. / Cuna, D. / Tagliente, M. A. / Protopapa, M. L. / Mevoli, A. / Aversa, P. / Blasi, C. / Capodieci, L. / Luprano, V. A. M.	Effect of treatments on the aging behaviour of hemp fibres for building construction in the Mediterranean Area	37-47
Alghoul, Samah K. / Rijabo, Hassan G. / Mashena, Mohamed E.	Energy consumption in buildings: A correlation for the influence of window to wall ratio and window orientation in Tripoli, Libya	82-86
Johnson, Timothy P. / Dowell, Robert K.	Evaluation of the overstrength factor for nonstructural component anchorage into concrete via dynamic shaking table tests	205-215
Laaroussi, N. / Lauriat, G. / Raefat, S. / Garoum, M. / Ahachad, M.	An example of comparison between ISO Norm calculations and full CFD simulations of thermal performances of hollow bricks	69-81
El Hafid, Kenza / Hajjaji, Mohamed / El Hafid, Hassan	Influence of NaOH concentration on microstructure and properties of cured alkali-activated calcined clay	158-165
Adazabra, A. N. / Viruthagiri, G. / Kannan, P.	Influence of spent shea waste addition on the technological properties of fired clay bricks	166-177
Aziz, Azizuddin Abd / Sumiyoshi, Daisuke / Akashi, Yasunori	Low cost humidity controlled air-conditioning system for building energy savings in tropical climate	9-16
Youssf, Osama / Hassanli, Reza / Mills, Julie E.	Mechanical performance of FRP-confined and unconfined crumb rubber concrete containing high rubber content	115-126
Tsozué, Désiré / Nzeugang, Aubin Nzeukou / Mache, Jacques Richard / Loweh, Suilabayuy / Fagel, Nathalie	Mineralogical, physico-chemical and technological characterization of clays from Maroua (Far-North, Cameroon) for use in ceramic bricks production	17-24
Schwingshackl, Daniel / Rehrl, Jakob / Horn, Martin / Belz, Julian / Nelles, Oliver	Model extension for model based MIMO control in HVAC systems	224-229
Glew, David / Brooke-Peat, Matthew / Gorse, Christopher	Modelling insulated coving's potential to reducing thermal bridging and moisture risk in solid wall dwellings retrofitted with external wall insulation	216-223
Awwad, Ahmed / Mohamed, Mohamed H. / Fatouh, Mohamed	Optimal design of a louver face ceiling diffuser using CFD to improve occupant's thermal comfort	134-157
El Gamal, Maisa M. / El-Dieb, Amr S. / Mohamed, Abdel-Mohsen O. / El Sawy, Khaled M.	Performance of modified sulfur concrete exposed to actual sewerage environment with variable temperature, humidity and gases	1-8
Loutou, Mohamed / Hajjaji, Mohamed / Babram, Mohammed Ait / Mansori, Mohammed / Favotto, Claude / Hakkou, Rachid	Phosphate sludge-based ceramics: Microstructure and effects of processing factors	48-55
Junior, Orlando G. da S. / de Melo, Renato P. / Sales, Rosemary do B. C. / Ayres, Eliane / Patricio, Patrícia S. de O.	Processing and characterization of polyethylene/starch/curauá composites: Potential for application as thermal insulated coating	178-186
Rakhimov, Ravil Z. / Rakhimova, Nailia R. / Gaifullin, Albert R. / Morozov, Vladimir P.	Properties of Portland cement pastes enriched with addition of calcined marl	30-36
Vazirizade, Sayyed Mohsen / Nozhati, Saeed / Zadeh, Mostafa Allameh	Seismic reliability assessment of structures using artificial neural network	230-235
D'Alessandro, F. / Bianchi, F. / Baldinelli, G. / Rotili, A. / Schiavoni, S.	Straw bale constructions: Laboratory, in field and numerical assessment of energy and environmental performance	56-68
Shim, Hyunsook / Choi, Gyunghyun	Study of construction convergence technology for performance improvement in functional building materials	108-114
Awadh, Omair	Sustainability and green building rating systems: LEED, BREEAM, GSAS and Estidama critical analysis	25-29

Auteur(s)

Titre

Page(s)

Fokaides, P. A. / Panayidou, A. / Hadjichristos, C. / Phocas, M. C.

Application of non-linear programming to optimize buildings' solar exposure

127-133

Tena-Colunga, Arturo / Urbina-Californias, Luis Angel / Archundia-Aranda, Hans I.

Assessment of the shear strength of continuous reinforced concrete haunched beams based upon cyclic testing

187-204

Evola, G. / Gagliano, A. / Marletta, L. / Nocera, F.

Controlled mechanical ventilation systems in residential buildings: Primary energy balances and financial issues

96-107

Liu, Changyu / Wu, Yangyang / Li, Dong / Zhou, Yingming / Wang, Zhiguo / Liu, Xiaoyan

Effect of PCM thickness and melting temperature on thermal performance of double glazing units

87-95

Donatelli, A. / Cuna, D. / Tagliente, M. A. / Protopapa, M. L. / Mevoli, A. / Aversa, P. / Blasi, C. / Capodieci, L. / Luprano, V. A. M.

Effect of treatments on the aging behaviour of hemp fibres for building construction in the Mediterranean Area

37-47

Alghoul, Samah K. / Rijabo, Hassan G. / Mashena, Mohamed E.

Energy consumption in buildings: A correlation for the influence of window to wall ratio and window orientation in Tripoli, Libya

82-86

Johnson, Timothy P. / Dowell, Robert K.

Evaluation of the overstrength factor for nonstructural component anchorage into concrete via dynamic shaking table tests

205-215

Laaroussi, N. / Lauriat, G. / Raefat, S. / Garoum, M. / Ahachad, M.

An example of comparison between ISO Norm calculations and full CFD simulations of thermal performances of hollow bricks

69-81

El Hafid, Kenza / Hajjaji, Mohamed / El Hafid, Hassan

Influence of NaOH concentration on microstructure and properties of cured alkali-activated calcined clay

158-165

Adazabra, A. N. / Viruthagiri, G. / Kannan, P.

Influence of spent shea waste addition on the technological properties of fired clay bricks

166-177

Aziz, Azizuddin Abd / Sumiyoshi, Daisuke / Akashi, Yasunori

Low cost humidity controlled air-conditioning system for building energy savings in tropical climate

9-16

Youssf, Osama / Hassanli, Reza / Mills, Julie E.

Mechanical performance of FRP-confined and unconfined crumb rubber concrete containing high rubber content

115-126

Tsozué, Désiré / Nzeugang, Aubin Nzeukou / Mache, Jacques Richard / Loweh, Suilabayuy / Fagel, Nathalie

Mineralogical, physico-chemical and technological characterization of clays from Maroua (Far-North, Cameroon) for use in ceramic bricks production

17-24

Schwingshackl, Daniel / Rehrl, Jakob / Horn, Martin / Belz, Julian / Nelles, Oliver

Model extension for model based MIMO control in HVAC systems

224-229

Glew, David / Brooke-Peat, Matthew / Gorse, Christopher

Modelling insulated coving's potential to reducing thermal bridging and moisture risk in solid wall dwellings retrofitted with external wall insulation

216-223

Awwad, Ahmed / Mohamed, Mohamed H. / Fatouh, Mohamed

Optimal design of a louver face ceiling diffuser using CFD to improve occupant's thermal comfort

134-157

El Gamal, Maisa M. / El-Dieb, Amr S. / Mohamed, Abdel-Mohsen O. / El Sawy, Khaled M.

Performance of modified sulfur concrete exposed to actual sewerage environment with variable temperature, humidity and gases

1-8

Loutou, Mohamed / Hajjaji, Mohamed / Babram, Mohammed Ait / Mansori, Mohammed / Favotto, Claude / Hakkou, Rachid

Phosphate sludge-based ceramics: Microstructure and effects of processing factors

48-55

Junior, Orlando G. da S. / de Melo, Renato P. / Sales, Rosemary do B. C. / Ayres, Eliane / Patricio, Patrícia S. de O.

Processing and characterization of polyethylene/starch/curauá composites: Potential for application as thermal insulated coating

178-186

Rakhimov, Ravil Z. / Rakhimova, Nailia R. / Gaifullin, Albert R. / Morozov, Vladimir P.

Properties of Portland cement pastes enriched with addition of calcined marl

30-36

Vazirizade, Sayyed Mohsen / Nozhati, Saeed / Zadeh, Mostafa Allameh

Seismic reliability assessment of structures using artificial neural network

230-235

D'Alessandro, F. / Bianchi, F. / Baldinelli, G. / Rotili, A. / Schiavoni, S.

Straw bale constructions: Laboratory, in field and numerical assessment of energy and environmental performance

56-68

Shim, Hyunsook / Choi, Gyunghyun

Study of construction convergence technology for performance improvement in functional building materials

108-114

Awadh, Omair

Sustainability and green building rating systems: LEED, BREEAM, GSAS and Estidama critical analysis

25-29

Publicité

Journal of Building Engineering - mai 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Building Engineering - mai 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.