Journal of Building Engineering - décembre 2016

Publié:	décembre 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Del Prete, Iolanda / Cefarelli, Giuseppe / Nigro, Emidio	Application of criteria for selecting fire scenarios for structures within fire safety engineering approach	208-217
Roshan, Mohsen / Barau, Aliyu Salisu	Assessing Anidolic Daylighting System for efficient daylight in open plan office in the tropics	58-69
Clementi, F. / Gazzani, V. / Poiani, M. / Lenci, S.	Assessment of seismic behaviour of heritage masonry buildings using numerical modelling	29-47
Sobral, J. / Ferreira, L. A.	Availability of fire pumping systems under periodic inspection	285-291
Yadav, Jitendra Singh / Tiwari, Suresh Kumar	Behaviour of cement stabilized treated coir fibre-reinforced clay-pond ash mixtures	131-140
dos Santos, Cristina Calmeiro / Rodrigues, João Paulo C.	Calcareous and granite aggregate concretes after fire	231-242
Hosan, Anwar / Haque, Sharany / Shaikh, Faiz	Compressive behaviour of sodium and potassium activators synthetized fly ash geopolymer at elevated temperatures: A comparative study	123-130
Jutras, Ian / Meacham, Brian J.	Development of objective-criteria-scenario triplets and design fires for performance-based Fire Safety Design	269-284
Krivenko, Pavel V. / Guzii, Sergii G. / Bodnárová, Lenka / Valek, Jaroslav / Hela, Rudolf / Zach, Jirí	Effect of thickness of the intumescent alkali aluminosilicate coating on temperature distribution in reinforced concrete	14-19
Njoya, D. / Elimbi, A. / Fouejio, D. / Hajjaji, M.	Effects of two mixtures of kaolin-talc-bauxite and firing temperatures on the characteristics of cordierite- based ceramics	99-106
Lee, Sihwan / Park, Beungyong / Kim, Jeongil / Kato, Shinsuke	Evaluation of thermal characteristics on a multi-sheet-type radiant panel heating system	48-57
Quagliarini, Enrico / Clementi, Francesco / Maracchini, Gianluca / Monni, Francesco	Experimental assessment of concrete compressive strength in old existing RC buildings: A possible way to reduce the dispersion of DT results	162-171
Dimassi, Narjes / Dehmani, Leila	Experimental heat flux analysis of a solar wall design in Tunisia	70-80
Tukia, Toni / Uimonen, Semen / Siikonen, Marja-Liisa / Hakala, Harri / Donghi, Claudio / Lehtonen, Matti	Explicit method to predict annual elevator energy consumption in recurring passenger traffic conditions	179-188
Bilotta, Antonio / de Silva, Donatella / Nigro, Emidio	General approach for the assessment of the fire vulnerability of existing steel and composite steel-concrete structures	198-207
Kumar, Sujeet / Yankwa Djobo, Jean Noël / Kumar, Anil / Kumar, Sanjay	Geopolymerization behavior of fine iron-rich fraction of brown fly ash	172-178
Alaka, Hafiz A. / Oyedele, Lukumon O.	High volume fly ash concrete: The practical impact of using superabundant dose of high range water reducer	81-90
Douzane, Omar / Promis, Geoffrey / Roucoult, Jean-Marc / Tran Le, Anh-Dung / Langlet, Thierry	Hygrothermal performance of a straw bale building: In situ and laboratory investigations	91-98
Matthews, Elizabeth C. / Friedland, Carol J. / Orooji, Fatemeh	Integrated environmental sustainability and resilience assessment model for coastal flood hazards	141-151
Zhang, Xia / Mehaffey, Jim / Hadjisophocleous, George	Life risks due to fire in mid- and high-rise, combustible and non-combustible residential buildings	189-197
Friedrich, Daniel / Luible, Andreas	Measuring the wind suction capacity of plastics-based cladding using foil bag tests: A comparative study	152-161
Hidalgo, Juan Patricio / Gerasimov, Nikolai / Hadden, Rory Miles / Torero, José Luis / Welch, Stephen	Methodology for estimating pyrolysis rates of charring insulation materials using experimental temperature measurements	249-259
Duny, M. / Dhima, D. / Garo, J. P. / Wang, H. Y.	Numerical investigation on window ejected facade flames	305-312
Laím, Luís / Rodrigues, João Paulo C.	On the applicability and accuracy of fire design methods for open cold-formed steel beams	260-268
Naziris, Iordanis A. / Lagaros, Nikos D. / Papaioannou, Kyriakos	Optimized fire protection of cultural heritage structures based on the analytic hierarchy process	292-304
Couto, David L. P. / Fonseca, Elza M. M. / Piloto, Paulo A. G. / Meireles, Jorge M. / Barreira, Luísa M. S. / Ferreira, Débora R. S. M.	Perforated cellular wooden slabs under fire: Numerical and experimental approaches	218-224
Al-Hadithi, Abdulkader Ismail / Hilal, Nahla Naji	The possibility of enhancing some properties of self-compacting concrete by adding waste plastic fibers	20-28
Jang, Hong-seok / So, Hyoung-seok / So, Seungyoung	The properties of reactive powder concrete using PP fiber and pozzolanic materials at elevated temperature	225-230
Hull, T. Richard / Brein, Dieter / Stec, Anna A.	Quantification of toxic hazard from fires in buildings	313-318
Viegas, J. C.	Saltwater experiments with air curtains for smoke control in the event of fire	243-248
Habibi, Shahryar	Smart innovation systems for indoor environmental quality (IEQ)	1-13
Foraboschi, Paolo	Versatility of steel in correcting construction deficiencies and in seismic retrofitting of RC buildings	107-122

Informations
sur cette fiche
IssueID
16988
Publié(e) le:
02.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Journal of Building Engineering - décembre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Building Engineering - décembre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.