Journal of Building Engineering - juin 2016

Publié:	juin 2016

Auteur(s)	Titre	Page(s)
Asghari Mooneghi, Maryam / Kargarmoakhar, Ramtin	Aerodynamic Mitigation and Shape Optimization of Buildings: Review	225-235
Bauer, Elton / Pavón, Elier / Barreira, Eva / Kraus de Castro, Eliane	Analysis of building facade defects using infrared thermography: Laboratory studies	93-104
Teixeira, S. / Santilli, A. / Puente, I.	Analysis of casting rate for the validation of models developed to predict the maximum lateral pressure exerted by self-compacting concrete on vertical formwork	215-224
Celik, Serdar / Family, Roxana / Menguc, M. Pinar	Analysis of perlite and pumice based building insulation materials	105-111
Róka-Madarász, Lívia / Mályusz, Levente / Tuczai, Péter	Benchmarking facilities operation and maintenance management using CAFM database: Data analysis and new results	184-195
Bilal, Muhammad / Oyedele, Lukumon O. / Akinade, Olugbenga O. / Ajayi, Saheed O. / Alaka, Hafiz A. / Owolabi, Hakeem A. / Qadir, Junaid / Pasha, Maruf / Bello, Sururah A.	Big data architecture for construction waste analytics (CWA): A conceptual framework	144-156
Nada, S. A. / El-Batsh, H. M. / Elattar, H. F. / Ali, N. M.	CFD investigation of airflow pattern, temperature distribution and thermal comfort of UFAD system for theater buildings applications	274-300
Emekli, Nefise Yasemin / Büyüktaş, Kenan / Başçetinçelik, Ali	Changes of the light transmittance of the LDPE films during the service life for greenhouse application	126-132
Assaad, Joseph Jean	Disposing waste latex paints in cement-based materials – Effect on flow and rheological properties	75-85
Cornaro, Cristina / Puggioni, Valerio Adoo / Strollo, Rodolfo Maria	Dynamic simulation and on-site measurements for energy retrofit of complex historic buildings: Villa Mondragone case study	17-28
El Fgaier, Fayçal / Lafhaj, Zoubeir / Chapiseau, Christophe / Antczak, Emmanuel	Effect of sorption capacity on thermo-mechanical properties of unfired clay bricks	86-92
Pihelo, Peep / Kalamees, Targo	The effect of thermal transmittance of building envelope and material selection of wind barrier on moisture safety of timber frame exterior wall	29-38
Jadhav, Ganesh K. / Ghanegaonkar, P. M. / Garg, Sharad	Experimental and CFD analysis of turbo ventilator	196-202
Castiglioni, Carlo A. / Drei, Alberto / Carydis, Panayotis / Mouzakis, Harris	Experimental assessment of static friction between pallet and beams in racking systems	203-214
Yin, Peng / Pate, Michael B. / Sweeney, James F.	The impact of operating pressure on residential bathroom exhaust fan performance	163-172
Ramirez-Garcia, Alberto T. / Floyd, Royce W. / Hale, W. Micah / Martí-Vargas, J. R.	Influence of concrete strength on development length of prestressed concrete members	173-183
Satyavada, Harish / Baldi, Simone	An integrated control-oriented modelling for HVAC performance benchmarking	262-273
Williams, Joseph / Mitchell, Rachel / Raicic, Vesna / Vellei, Marika / Mustard, Graham / Wismayer, Amber / Yin, Xunzhi / Davey, Stephen / Shakil, Muzzamil / Yang, Yuanzhang / Parkin, Anna / Coley, David	Less is more: A review of low energy standards and the urgent need for an international universal zero energy standard	65-74
Kylili, Angeliki / Fokaides, Paris A.	Life Cycle Assessment (LCA) of Phase Change Materials (PCMs) for building applications: A review	133-143
Sesana, Marta Maria / Grecchi, Manuela / Salvalai, Graziano / Rasica, Caterina	Methodology of energy efficient building refurbishment: Application on two university campus-building case studies in Italy with engineering students	54-64
Faizollahzadeh Ardabili, Sina / Mahmoudi, Asghar / Mesri Gundoshmian, Tarahom	Modeling and simulation controlling system of HVAC using fuzzy and predictive (radial basis function, RBF) controllers	301-308
Henriksen, Thomas / Lo, Stephen / Knaack, Ulrich	A new method to advance complex geometry thin-walled glass fibre reinforced concrete elements	243-251
Benaicha, Mouhcine / Burtschell, Yves / Alaoui, Adil Hafidi	Prediction of compressive strength at early age of concrete – Application of maturity	119-125
Rhodes, Joshua D. / Imane Bouhou, Nour-El / Upshaw, Charles R. / Blackhurst, Michael F. / Webber, Michael E.	Residential energy retrofits in a cooling climate	112-118
Ruivo, Celestino R. / Angrisani, Giovanni / Costa, José J.	Simplified component model of heating and dry-cooling coils: Influence of altitude and of glycol concentration in the heat transfer fluid on the error prediction of the heat transfer rate	39-53
de Brito, J. / Ferreira, J. / Pacheco, J. / Soares, D. / Guerreiro, M.	Structural, material, mechanical and durability properties and behaviour of recycled aggregates concrete	1-16
Kalmár, Ferenc	Summer operative temperatures in free running existing buildings with high glazed ratio of the facades	236-242
Tchakouté, Hervé Kouamo / Rüscher, Claus Henning / Kong, Sakeo / Ranjbar, Navid	Synthesis of sodium waterglass from white rice husk ash as an activator to produce metakaolin-based geopolymer cements	252-261
Patil, Sudhir P. / Sangle, Keshav K.	Tests of steel fibre reinforced concrete beams under predominant torsion	157-162

Auteur(s)

Titre

Page(s)

Asghari Mooneghi, Maryam / Kargarmoakhar, Ramtin

Aerodynamic Mitigation and Shape Optimization of Buildings: Review

225-235

Bauer, Elton / Pavón, Elier / Barreira, Eva / Kraus de Castro, Eliane

Analysis of building facade defects using infrared thermography: Laboratory studies

93-104

Teixeira, S. / Santilli, A. / Puente, I.

Analysis of casting rate for the validation of models developed to predict the maximum lateral pressure exerted by self-compacting concrete on vertical formwork

215-224

Celik, Serdar / Family, Roxana / Menguc, M. Pinar

Analysis of perlite and pumice based building insulation materials

105-111

Róka-Madarász, Lívia / Mályusz, Levente / Tuczai, Péter

Benchmarking facilities operation and maintenance management using CAFM database: Data analysis and new results

184-195

Bilal, Muhammad / Oyedele, Lukumon O. / Akinade, Olugbenga O. / Ajayi, Saheed O. / Alaka, Hafiz A. / Owolabi, Hakeem A. / Qadir, Junaid / Pasha, Maruf / Bello, Sururah A.

Big data architecture for construction waste analytics (CWA): A conceptual framework

144-156

Nada, S. A. / El-Batsh, H. M. / Elattar, H. F. / Ali, N. M.

CFD investigation of airflow pattern, temperature distribution and thermal comfort of UFAD system for theater buildings applications

274-300

Emekli, Nefise Yasemin / Büyüktaş, Kenan / Başçetinçelik, Ali

Changes of the light transmittance of the LDPE films during the service life for greenhouse application

126-132

Assaad, Joseph Jean

Disposing waste latex paints in cement-based materials – Effect on flow and rheological properties

75-85

Cornaro, Cristina / Puggioni, Valerio Adoo / Strollo, Rodolfo Maria

Dynamic simulation and on-site measurements for energy retrofit of complex historic buildings: Villa Mondragone case study

17-28

El Fgaier, Fayçal / Lafhaj, Zoubeir / Chapiseau, Christophe / Antczak, Emmanuel

Effect of sorption capacity on thermo-mechanical properties of unfired clay bricks

86-92

Pihelo, Peep / Kalamees, Targo

The effect of thermal transmittance of building envelope and material selection of wind barrier on moisture safety of timber frame exterior wall

29-38

Jadhav, Ganesh K. / Ghanegaonkar, P. M. / Garg, Sharad

Experimental and CFD analysis of turbo ventilator

196-202

Castiglioni, Carlo A. / Drei, Alberto / Carydis, Panayotis / Mouzakis, Harris

Experimental assessment of static friction between pallet and beams in racking systems

203-214

Yin, Peng / Pate, Michael B. / Sweeney, James F.

The impact of operating pressure on residential bathroom exhaust fan performance

163-172

Ramirez-Garcia, Alberto T. / Floyd, Royce W. / Hale, W. Micah / Martí-Vargas, J. R.

Influence of concrete strength on development length of prestressed concrete members

173-183

Satyavada, Harish / Baldi, Simone

An integrated control-oriented modelling for HVAC performance benchmarking

262-273

Williams, Joseph / Mitchell, Rachel / Raicic, Vesna / Vellei, Marika / Mustard, Graham / Wismayer, Amber / Yin, Xunzhi / Davey, Stephen / Shakil, Muzzamil / Yang, Yuanzhang / Parkin, Anna / Coley, David

Less is more: A review of low energy standards and the urgent need for an international universal zero energy standard

65-74

Kylili, Angeliki / Fokaides, Paris A.

Life Cycle Assessment (LCA) of Phase Change Materials (PCMs) for building applications: A review

133-143

Sesana, Marta Maria / Grecchi, Manuela / Salvalai, Graziano / Rasica, Caterina

Methodology of energy efficient building refurbishment: Application on two university campus-building case studies in Italy with engineering students

54-64

Faizollahzadeh Ardabili, Sina / Mahmoudi, Asghar / Mesri Gundoshmian, Tarahom

Modeling and simulation controlling system of HVAC using fuzzy and predictive (radial basis function, RBF) controllers

301-308

Henriksen, Thomas / Lo, Stephen / Knaack, Ulrich