Iranian Journal of Science and Technology, Transactions of Civil Engineering - v. 48, n. 5 (avril 2024)

Publié:	avril 2024

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Chen, Deqiang / Mo, Peng / Chang, Zhenchao / Hao, Tianzhi / Li, Zhaofeng	An Analytical Solution of Chloride Transfer into RC Pipe Pile by Convection–Diffusion Effect Considering Time-Dependent Surface Chloride Concentration	3273-3283
Salihi, Brwa Hasan Hussein / Hamad, Feirusha Salih	ANN and Gradient Boosting-Based Predictive Techniques for Punching Shear Capacity of Concrete Slabs Reinforced with FRP Bars	2949-2965
Ma, Tengfei / Chen, Zhihua / Du, Yansheng / Zhou, Ting / Zhang, Yutong	Axial Compressive Performance of L-Shaped Columns Composed of RAC-Filled Steel Tubes	3069-3086
Boucheta, Abderrahmane / Bouazza, Mokhtar / Becheri, Tawfiq / Eltaher, Mohamed A. / Tounsi, Abdelouahed / Benseddiq, Noureddine	Bending of Sandwich FGM Plates with a Homogeneous Core Either Hard or Soft Via a Refined Hyperbolic Shear Deformation Plate Theory	3441-3455
Cai, Guanghua / Zhang, Caihong / Zeng, Gang / Qiu, Jinwei / Dong, Yiqie / Lu, Haijun	Comparison of Mechanical Properties of the Geopolymer-Solidified Soils Activated by Two Alkaline Oxides	3535-3546
Kumar, Shivam / Gupta, Pramod Kumar / Iqbal, Mohd. Ashraf	A Comprehensive Study on Optimizing Activator Composition for Enhanced Strength and Micro-Structure in High-Strength Alkali-Activated Slag Binders	3173-3187
Gültekin, Adil	Compressive Strength and Microstructure of Microwave-Cured Waste Brick Powder-Based Geopolymer Mortars	3119-3133
Ma, Qiang / Chen, Zhuo / Zheng, JunJie / Liu, Yiming / Zeng, Gaofei	Earth Pressure Calculation of High Fill Culvert Considering Inclination of Soil Column Interface	3573-3590
Samberou, Adamou Marou Seyni / Ateş, Şevket / Atmaca, Barbaros	The Effect of CFRP Application on the Strength and Dynamic Characteristic of Unreinforced Masonry Wall	3103-3117
Kadhim, Muhammad Jawad / Al-Jabar, Mustafa Riyadh Abed	Effect of Reactive Powder Concrete (RPC) and Textile-Reinforced Mortar (TRM) on the Punching Shear Behavior of Flat Slabs with Post-Openings	3257-3272
Chen, Cong / Peng, Wenming / Li, Jian / Luo, Qixun / Jiang, Bingnan / Yu, Yanyang / Liu, Enlong	Effects of Freeze–Thaw Cycle on Permeability and Compression Properties of Aeolian Soil–Bentonite Mixture	3621-3641
Ebrahimi, Mahdi / Mohammadi, Mirali / Meshkati, Sayed Mohammad Hadi / Imanshoar, Farhad	Embankment Dams Overtopping Breach: A Numerical Investigation of Hydraulic Results	3707-3716
Khorram, Saeed / Jehbez, Nima	Enhancing Accuracy of Forecasting Monthly Reservoir Inflow by Using Comparison of Three New Hybrid Models: A Case Study of The Droodzan Dam in Iran	3735-3759
Yazici, Şemsi / Aytekin, Burcu / Güller, Canberk / Mardani, Ali	Enhancing Mortar Mixtures with Bacterial Impregnation: Sustainable Approaches and Strength Improvement	3241-3256
Altıok, Taha Yasin / Üstüner, Betül / Ozyuksel Ciftcioglu, Aybike / Demir, Ali	Enhancing Structural Evaluation: Machine Learning Approaches for Inadequate Reinforced Concrete Frames	3027-3047
Khdir, Muhsin K. / Yaseen, Sinan A.	Evaluating Punching Shear Strength in Basalt-Reinforced Slabs: An Experimental Analysis of Eccentric Loading and Reinforcement Ratios	3015-3025
Perales-Santillan, M. E. / Díaz-Aguilera, J. H. / Mendoza-Rangel, J. M.	Evaluation of the rheological behavior for alkaline-activated cements of metakaolin and limestone for its potential application in 3D printing	3231-3239
Hosseini Fani, Mehrshad / Bagherzadeh Khalkhali, Ahad / Ganjian, Navid	Experimental and Numerical Investigation of Strip Footing Behavior on Sand with a Weak Layer of Varying Thicknesses and Overburden Loads	3607-3620
Ahmadi, Allah dad / Torabi, Ashkan / Totonchi, Arash. / Safari, Davoud	Experimental and Numerical Investigation on the Behaviour of Precast Concrete Sandwich Panels with Different Shear Connectors	3087-3102
Moradi Khalaj, Mostafa / Jahanandish, Mojtaba / Khalaf, Poya	Experimental Investigation of Nail as a Geothermal Structure and Heat Exchange Effects on its Pull-Out Behavior	3547-3558
Moghaddassi, Nargess / Vaghefi, Mohammad / Akbari, Maryam	Experimental Study: Effects of Pier Position and Critical Velocity Ratio on Scour Pattern in Two Consecutive Bends Under Clear Water Condition	3761-3773
Subramanian, Saravanan / Davis, Robin / Thomas, Blessen Skariah	Exploring the Potential of Geopolymer Binders: A Study on Basic Oxygen Furnace Slag and Fly Ash Mixes	3135-3155
Jafari, Nasrin / Azhari, Mojtaba	Free Vibration and Static Analysis of Cylindrical Sandwich Shell Panels with Honeycomb Cores	3363-3372
Daniel, Victor Rajasekaran Ruban / Sujatha, Simon Judes	Geopolymer Concrete: Enhanced the Strength of Structural Elements Using Ground Granulated Blast Furnace Slag	3157-3171
Yang, Weiwei / Yan, Chunyan / Wei, Yifan	Green Optimization Product Design of Suspended Fillers Based on Water Environmental Materials	3805-3815
Santana, R. U. / Reis, S. F. S. / Morais, M. V. G. / Diniz, A. C. G. C.	GUM-S1 to Evaluate Rotational Inertia Uncertainty Obtained by Acceleration–Deceleration Tests	3339-3350
Ghaderi, Afshin / Nouri, Mahdi / Hoseinzadeh, Leila / Ferdousi, Adel	Hybrid Vibration Control of Tall Tubular Structures via Combining Base Isolation and Mass Damper Systems Optimized by Enhanced Special Relativity Search Algorithm	3373-3391
Chen, Yeqiang / Liu, Ronggui / Zheng, Shaoqiang	Identification and Diagnosis of Bridge Structural Damage Based on Static Test Data	2981-2996
Pourabedini, Parisa / Banihashemi, Seyyed Mohammad Ali / Akbari, Zahra	Impacts of Dam Removal on Water Quality: Case Study of Zonouz Dam	3681-3695
Chahar, Arun Singh / Pal, Priyaranjan	Investigation on Binary, Ternary, and Quaternary Blended Cement Mortar Integrated with Mineral Additives	3407-3439
Song, Dejun / Li, Gang / Liu, Jinsheng	Long-Distance and High-Efficiency Temporary Support Technology in Dynamic Pressure Bearing Area of Gob-Side Entry Retaining	3521-3533
Pratap, Bheem / Kumari, Pooja / Rao, B. Hanumantha / Mondal, Somenath	Mechanical and Durability Performance of Fly Ash on Bauxite Residue and Ground Granulated Blast Slag Based Geopolymer Composite	3213-3229
Alempour Rajabi, Farnaz / Ahmadi, Ehsan / Ibrahim, Osama Ragab / Mohamed Al Maghawry, Salma / Aghamajidi, Rozbeh	Modeling Monthly Evaporation in Different Climates Using ANN–COOT Hybrid Algorithm	3495-3510
Ghorbanzadeh, Mehrshad / Homami, Peyman / Shahrouzi, Mohsen	A Modified Framework for Reliability-Based Risk Analysis of Linear Concrete Circular Tunnel	3467-3482
Pinto-Cruz, Mao Cristian	A Modified Transfer Matrix Method for Static and Dynamic Analysis of Beams that Eliminates the Need to Compute the Inverse of the Zero Matrix	2875-2890
Babaei, Mehdi / Hanafi, Mohammad Reza	A Novel Method for Nonlinear Time-History Analysis of Structural Systems: Improved Newton–Cotes-Hermite-5P Method	2905-2918
Goswami, Avishek / Kalita, Hriday Mani	Numerical Model for Simulating Two Dimensional Unsteady Flows in Irregular Flow Domain	3591-3606
Abdelaziz, Mohamed Magdi / El-Ghazaly, Hany Ahmed / Gomaa, Mohamed Sayed	Numerical Modeling for Collapse Analysis of Cable-Stayed Bridges using the Improved Applied Element Method	2891-2904
Abbas, Asim / Ahmad, Mehran / Khan, Amir Hamza / Alam, Jehangeer / Ghani, Abdul	Numerical Study on the Behavior of Reinforced Concrete Sandwich Panels (RCSPs) under Blast Load	3049-3068
Kianpour, Majid / Bagherzadeh Khalkhali, Ahad / Dabiri, Rouzbeh / Adeli, Mehdi Mahdavi	Numerical Study on the Ultimate Bearing Capacity of the Strip Foundations on the Inclined Multi-Layered Soil Mass with a Weak Layer	3511-3519
Kamiloğlu, Hakan Alper / Yılmaz, Fatih	Optimization, Characterization, and Carbon Footprint Analysis of Alkali Activated Waste Tuff and Fly Ash Mixtures for Deep Mixed Columns	3661-3679
Chattopadhyay, Titas / Kundu, Snehasis	Origination of Cellular Secondary Cells in Wide Open-Channel Turbulent Unsteady Flows over Spanwise-Oriented Alternate Rough and Smooth Bed Strips	3643-3660
Mohammed, Salah J. / Akhaveissy, Amir H. / Kadhum, Mohammed Mansour	Performance of Fire Damaged Beam-Column Joints Strengthened with Slurry Infiltrated Fiber Concrete	2997-3013
Kaya, Mehmet / İlkentapar, Serhan / Durak, Uğur / Atabey, İsmail İsa / Çelikten, Serhat	Physical Mechanical and Microstructural Properties of Kaolin-Based Fly Ash-Added Geopolymer Mortars	3559-3572
Lu, Hua / Yang, Yanxin / Lin, Ziyun / Zhan, Xudong	Prediction of Liquefaction Triggering Time Based on Seismic Records	3351-3362
Kumar, Rakesh / Samui, Pijush / Rai, Baboo	Prediction of the Splitting Tensile Strength of Manufactured Sand Based High-Performance Concrete Using Explainable Machine Learning	3717-3734
Foyouzati, Amin	Probabilistic Seismic Hazard Assessment Studies on the Central-East of Iran—Kerman Region	3457-3465
Odeh, Ali / Al-Fakih, Amin / Alghannam, Mohammed / Al-Ainya, Mohammad / Khalid, Hammad / Al-Shugaa, Madyan A. / Thomas, Blessen Skariah / Aswin, Muhammad	Recent Progress in Geopolymer Concrete Technology: A Review	3285-3308
Gao, Yuqiang / Ji, Bohai / Fu, Zhongqiu / Chen, Niannian / Wang, Qiudong	Reinforcement Effect of Steel Plates After Cracking on Both Sides of Diaphragm-to-Rib Welded Joint in Orthotropic Steel Decks	2967-2979
Jiang, Yingjun / Bai, Chenfan / Fan, Jiangtao / Zhang, Yu / Yuan, Kejia / Deng, Changqing	Research on the Shrinkage Performance of Vertical Vibration Compacted Cement-Stabilized Gravel	3309-3322
Liu, Dewen / Zheng, Yanping / Lei, Min / Zhao, Jibing	Seismic Response Analysis of a New Staggered Story Isolated Structure Under Three-Dimensional Long-Period Earthquakes	3483-3494
Nasserasadi, Kiarash / Mohammadloo, Hamed / Ghotboddini, Behzad	Seismic Risk of Low-Rise Steel MRF of Built-Up Batten Columns in Moderate Seismicity Regions	3393-3406
Arjun Raj, P. K. / Sarath, D. / Nagarajan, Praveen / Thomas, Blessen Skariah	A Simplified Mix Design for GGBS–Dolomite Geopolymer Concrete Using the Taguchi Method	3189-3212
Cruz, Mao Cristian Pinto / Bozdogan, Kanat Burak	Static, Dynamic and Stability Analysis of Tall Buildings by the Transfer Matrix Method Using Replacement Timoshenko Beam	2919-2930
Rossi, Alexandre / Hosseinpour, Mahmoud / de Carvalho, Adriano Silva / Martins, Carlos Humberto / Sharifi, Yasser	Stepwise Regression for LTB Strength Prediction of I-Beams Subjected to Different Loading Conditions	2931-2947
Alomari, Ahmad H. / Alhadidi, Taqwa I.	A Stochastic Approach for Modeling the Saturation Flow Rate at Traffic Signals in Jordan	3775-3786
Khosravi, Mohammad Reza / Mohammadizadeh, Mohammad Reza / Saffari, Hamed / Torkzadeh, Peyman	A Study of Progressive Collapse in Moment-Resisting Reinforced Concrete Structures Considering Damping Ratio	3323-3337
Porhemmat, Mojtaba / Khozani, Zohreh Sheikh / Mohtar, Wan Hanna Melini Wan / Mohd Razali, Siti Fatin / El-Shafie, Ahmed	Temporal and Spatial Local Scour Profile of Cylindrical Pier in Cohesive Sediment Mixture	3787-3804
Yao, Lei / Ning, Xiaoyu / Tang, Zhiyuan / Qi, Yangxu	Vertical Distribution Characteristics of Microcystin in Water during the Accumulation and Deposition of Cyanobacteria	3817-3827
Dong, Pil-Sung / Rim, Un-Ryong	Wave Interaction with a Bottom-Mounted Body in Front of a Vertical Wall Using an Exact DtN Boundary Condition	3697-3705

Informations
sur cette fiche
IssueID
74581
Publié(e) le:
31.08.2024
Modifié(e) le:
31.08.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Iranian Journal of Science and Technology, Transactions of Civil Engineering - v. 48, n. 5 (avril 2024)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Iranian Journal of Science and Technology, Transactions of Civil Engineering - v. 48, n. 5 (avril 2024)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.