Frattura ed Integrità Strutturale - v. 15, n. 55 (décembre 2020)

Publié:	décembre 2020

Auteur(s)	Titre	Page(s)
Elshazly, Fady / Mustafa, Suzan / Fawzy, Hesham	Analysis of strengthened short deficient rubberized concrete-filled steel tubular columns	1-19
Merdaci, Slimane / Mostefa, Adda Hadj / Beldjelili, Youcef / Merazi, Mohamed / Boutaleb, Sabrina / Hellal, Hadjira	Analytical solution for statif bending analyses of functionally grades plates with porosities
Popov, Vyacheslav / Kashelkin, V. V. / Demidov, A. S.	Assessment of the strength reliability of high-temperature heat exchangers with long service life at the design stage	136-144
Mendes, Paulo / Correia, José A. F. O. / de Jesus, Abilio M. P. / Ávila, Bianca / Carvalho, Hermes / Berto, Filippo	A brief review of fatigue design criteria on offshore wind turbine support structures	302-315
Sunil, B. / Rajanna, S.	Effect of the intermediate quenching on fracture toughness of ferrite-martensite dual phase steels
Gryguc, Andrew / Behravesh, S. B. / Jahed, H. / Wells, M. / Williams, B. / Gruber, R. / Duquett, A. / Sparrow, T. / Lambrou, M. / Su, X.	Effect of thermomechanical processing defects on fatigue and fracture behaviour of forged magnesium	213-227
Konieczny, Mateusz / Gasiak, Grzegorz / Achtelik, Henryk	Experimental analysis of the state of stress in a steel – titanium perforated plate loaded with concentrated force	277-288
Rahmani, Masoud / Moslemi Petrudi, Amin	Experimental and numerical optimization study of shock wave damping in aluminum panel sandwich	88-109
Mani, Mohammed / Bouali, Meriem Fakhreddine / Kriker, Abdelouahed / Hima, Abdelkader	Experimental characterization of a new sustainable sand concrete in an aggressive environment	50-64
Ravikumar, M. / Reddappa, H. N. / Suresh, R. / Sreenivasa Reddy, M.	Experimental studies of different quenching media on mechanical and wear behavior of Al7075/SiC/Al2O3 hybrid composites	20-31
Đorđević, Branislav / Sedmak, Simon / Tanasković, Drakče / Gajin, Marko / Vučetić, Filip	Failure analysis and numerical simulation of slab carrying clamps	336-344
Fiorentin, Felipe / Oliveira, Bernardo / Pereira, João / Correia, José / de Jesus, Abilio M. P. / Berto, Filippo	Fatigue Behavior of Metallic Components Obtained by Topology Optimization for Additive Manufacturing	119-135
Hassanin, Ahmed I. / Fawzy, Hesham M. / Elsheikh, Ahmed I.	Fatigue loading characteristic for the composite steel-concrete beams	110-118
Hamadouche, Fella / Benzaama, Habib / Mokhtari, Mohamed / Abbes Tahar, Miloud	Influence of contact parameters in fretting-fatigue contact 3D problems	228-240
Yankin, Andrey / Mugatarov, A. I. / Wildemann, V. E.	Influence of different loading paths on the multiaxial fatigue behavior of 2024 aluminum alloy under the same amplitude values of the second invariant of the stress deviator tensor	327-335
Chernov, Andrey / Eleonsky, Sviatoslav / Pisarev, Vladimir	Influence of stress ratio on residual stress evolution near cold-expanded hole due to low-cycle fatigue by crack compliance data	174-186
Vigna, Lorenzo / Babaei, Iman / Garg, Ravin / Belingardi, Giovanni / Paolino, Davide Salvatore / Calzolari, Andrea / Galizia, Giuseppe	An innovative fixture for testing the crashworthiness of composite materials	76-87
Pina dos Santos, Paulo Sérgio / Maceiras, A. / Valvez, S. / Reis, P. N. B.	Mechanical characterization of different epoxy resins enhanced with carbon nanofibers	198-212
Ali, Sari Sharif / Arabani, Mahyar / Latifi, Hassan	Mechanical performance of intelligent asphalt mixture utilizing rejuvenator encapsulated method	187-197
Ferro, Paolo / Fabrizi, Alberto / Bonollo, Franco / Berto, Filippo	Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design	289-301
Zhang, Dianhao / Huang, Xiao-guang / Cheng, Bin-liang / Zhang, Neng	Numerical analysis and thermal fatigue life prediction of solder layer in a SiC-IGBT power module	316-326
Nawar, Mahmoud / Ata, Alaa / Nabil, Marwa / Hassan, Sally	Numerical analysis of underground tunnels subjected to surface blast loads	159-173
Kamel, Fedaoui / Baroura, Lazhar / Arar, Karim / Amrani, Hichem / Boutaani, Mohamed said	On the effect of stiffness/softness and morphology of interphase phase on the effective elastic properties of three-phase composite material	36-49
Benyerou, Djilali / Ould Chikh, El Bahri / Khellafi, Habib / Meddah, Hadj Miloud / Benhamena, Ali / Hachelaf, Kaddour / Lounis, Abdellah	Parametric Study Of Friction Stir Spot Welding (FSSW) For Polymer Materials Case Of High Density Polyethylene Sheets: Experimental And Numerical Study
Konieczny, Mateusz / Achtelik, Henryk / Gasiak, Grzegorz	Research of stress distribution in the cross-section of a bimetallic perforated plate perpendicularly loaded with concentrated force	241-257
Cucinotta, Filippo / D'Aveni, Antonino / Guglielmino, Eugenio / Risitano, Antonino / Risitano, Giacomo / Santonocito, Dario	Thermal Emission analysis to predict damage in specimens of High Strength Concrete	258-270
Hammadi, Nourddine / Mokhtari, Moahmed / Benzaama, Habib / Madani, Kouider / Brakna, Abdelkader / Abdelouahed, Elamine	Using XFEM to Predict the Damage with Temperature of the Steel Pipe Elbows under Bending and Pressure loading	345-359

Auteur(s)

Titre

Page(s)

Elshazly, Fady / Mustafa, Suzan / Fawzy, Hesham

Analysis of strengthened short deficient rubberized concrete-filled steel tubular columns

1-19

Merdaci, Slimane / Mostefa, Adda Hadj / Beldjelili, Youcef / Merazi, Mohamed / Boutaleb, Sabrina / Hellal, Hadjira

Analytical solution for statif bending analyses of functionally grades plates with porosities

Popov, Vyacheslav / Kashelkin, V. V. / Demidov, A. S.

Assessment of the strength reliability of high-temperature heat exchangers with long service life at the design stage

136-144

Mendes, Paulo / Correia, José A. F. O. / de Jesus, Abilio M. P. / Ávila, Bianca / Carvalho, Hermes / Berto, Filippo

A brief review of fatigue design criteria on offshore wind turbine support structures

302-315

Sunil, B. / Rajanna, S.

Effect of the intermediate quenching on fracture toughness of ferrite-martensite dual phase steels

Gryguc, Andrew / Behravesh, S. B. / Jahed, H. / Wells, M. / Williams, B. / Gruber, R. / Duquett, A. / Sparrow, T. / Lambrou, M. / Su, X.

Effect of thermomechanical processing defects on fatigue and fracture behaviour of forged magnesium

213-227

Konieczny, Mateusz / Gasiak, Grzegorz / Achtelik, Henryk

Experimental analysis of the state of stress in a steel – titanium perforated plate loaded with concentrated force

277-288

Rahmani, Masoud / Moslemi Petrudi, Amin

Experimental and numerical optimization study of shock wave damping in aluminum panel sandwich

88-109

Mani, Mohammed / Bouali, Meriem Fakhreddine / Kriker, Abdelouahed / Hima, Abdelkader

Experimental characterization of a new sustainable sand concrete in an aggressive environment

50-64

Ravikumar, M. / Reddappa, H. N. / Suresh, R. / Sreenivasa Reddy, M.

Experimental studies of different quenching media on mechanical and wear behavior of Al7075/SiC/Al2O3 hybrid composites

20-31

Đorđević, Branislav / Sedmak, Simon / Tanasković, Drakče / Gajin, Marko / Vučetić, Filip

Failure analysis and numerical simulation of slab carrying clamps

336-344

Fiorentin, Felipe / Oliveira, Bernardo / Pereira, João / Correia, José / de Jesus, Abilio M. P. / Berto, Filippo

Fatigue Behavior of Metallic Components Obtained by Topology Optimization for Additive Manufacturing

119-135

Hassanin, Ahmed I. / Fawzy, Hesham M. / Elsheikh, Ahmed I.

Fatigue loading characteristic for the composite steel-concrete beams

110-118

Hamadouche, Fella / Benzaama, Habib / Mokhtari, Mohamed / Abbes Tahar, Miloud

Influence of contact parameters in fretting-fatigue contact 3D problems

228-240

Yankin, Andrey / Mugatarov, A. I. / Wildemann, V. E.

Influence of different loading paths on the multiaxial fatigue behavior of 2024 aluminum alloy under the same amplitude values of the second invariant of the stress deviator tensor

327-335

Chernov, Andrey / Eleonsky, Sviatoslav / Pisarev, Vladimir

Influence of stress ratio on residual stress evolution near cold-expanded hole due to low-cycle fatigue by crack compliance data

174-186

Vigna, Lorenzo / Babaei, Iman / Garg, Ravin / Belingardi, Giovanni / Paolino, Davide Salvatore / Calzolari, Andrea / Galizia, Giuseppe

An innovative fixture for testing the crashworthiness of composite materials

76-87

Pina dos Santos, Paulo Sérgio / Maceiras, A. / Valvez, S. / Reis, P. N. B.

Mechanical characterization of different epoxy resins enhanced with carbon nanofibers

198-212

Ali, Sari Sharif / Arabani, Mahyar / Latifi, Hassan

Mechanical performance of intelligent asphalt mixture utilizing rejuvenator encapsulated method

187-197

Ferro, Paolo / Fabrizi, Alberto / Bonollo, Franco / Berto, Filippo

Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design

289-301

Zhang, Dianhao / Huang, Xiao-guang / Cheng, Bin-liang / Zhang, Neng

Numerical analysis and thermal fatigue life prediction of solder layer in a SiC-IGBT power module

316-326

Nawar, Mahmoud / Ata, Alaa / Nabil, Marwa / Hassan, Sally

Numerical analysis of underground tunnels subjected to surface blast loads

159-173

Kamel, Fedaoui / Baroura, Lazhar / Arar, Karim / Amrani, Hichem / Boutaani, Mohamed said

On the effect of stiffness/softness and morphology of interphase phase on the effective elastic properties of three-phase composite material

36-49

Benyerou, Djilali / Ould Chikh, El Bahri / Khellafi, Habib / Meddah, Hadj Miloud / Benhamena, Ali / Hachelaf, Kaddour / Lounis, Abdellah

Parametric Study Of Friction Stir Spot Welding (FSSW) For Polymer Materials Case Of High Density Polyethylene Sheets: Experimental And Numerical Study

Konieczny, Mateusz / Achtelik, Henryk / Gasiak, Grzegorz

Research of stress distribution in the cross-section of a bimetallic perforated plate perpendicularly loaded with concentrated force

241-257

Cucinotta, Filippo / D'Aveni, Antonino / Guglielmino, Eugenio / Risitano, Antonino / Risitano, Giacomo / Santonocito, Dario

Thermal Emission analysis to predict damage in specimens of High Strength Concrete

258-270

Hammadi, Nourddine / Mokhtari, Moahmed / Benzaama, Habib / Madani, Kouider / Brakna, Abdelkader / Abdelouahed, Elamine

Using XFEM to Predict the Damage with Temperature of the Steel Pipe Elbows under Bending and Pressure loading

345-359

Publicité

Frattura ed Integrità Strutturale - v. 15, n. 55 (décembre 2020)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Frattura ed Integrità Strutturale - v. 15, n. 55 (décembre 2020)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.