Engineering Structures - octobre 2022

Publié:	octobre 2022

Auteur(s)	Titre	Page(s)
Jiang, Qing / Wang, Hanqin / Feng, Yulong / Chong, Xun / Huang, Junqi / Wang, Shaoying / Zhou, Yating	Analysis and experimental testing of a self-centering controlled rocking wall with buckling-restrained braces at base	114843
Alotaibi, Khalid Saqer / AbdelRahman, Belal / Galal, Khaled	Analytical study and design approach of the axial and flexural response of reinforced masonry columns confined with FRP jackets	114805
Ma, Gao / Wu, Cheng / Hwang, Hyeon-Jong / Bai, Jiulin / Zeng, Zhihu	Bahavior of pre-damaged normal-strength concrete prisms repaired with basalt FRP sheets under axial compressive monotonic and repeated loading	114786
Yao, Xiao-Jun / Yi, Ting-Hua / Zhao, Shao-Wei	Blind modal identification for decentralized sensor network by modified sparse component analysis in frequency-domain subspace	114794
Huang, Hanhui / Chen, Kangming / Wu, Qingxiong / Nakamura, Shozo	Calculation method for the torsional bearing capacity of composite girders with CSW-CFST truss chords	114830
Liu, Yunfei / Zhu, Runze / Qin, Zhaoye / Chu, Fulei	A comprehensive study on vibration characteristics of corrugated cylindrical shells with arbitrary boundary conditions	114818
Zhang, Rui / Zhao, Ran / Liu, Zhenlun / Chen, Kedao / Hu, Peng / Liu, Zhanhui	Cyclic behavior of existing flexure-dominated RC bridge columns retrofitted by ECC jackets in the region of plastic hinge	114820
Hu, Meng / Xu, Yude / Li, Shaozheng / Lu, Hongyao	Detection of defect in ballastless track based on impact echo method combined with improved SAFT algorithm	114779
Grabke, Stefan / Bletzinger, Kai-Uwe / Wüchner, Roland	Development of a finite element-based damage localization technique for concrete by applying coda wave interferometry	114585
Cicione, Antonio / Walls, Richard	The effect of shear connectors on the strength, serviceability and dynamic response of composite floors using cold-formed steel beams and concrete in decking	114806
Sagar Varma Sagi, Murali / Lakavath, Chandrashekhar / Prakash, S. Suriya	Effect of steel fibers on the shear behavior of Self-Compacting reinforced concrete deep Beams: An experimental investigation and analytical model	114802
Klein, Fabian / Marx, Steffen	Effects of warping shear deformation on the torsional load-bearing behaviour of assembled half-shell structures for wind energy towers	114728
Yu, Qian-Qian / Wu, Jie-Ying / Gu, Xiang-Lin / Zhou, Fang-Yuan	Experimental study on effects of U-shape dampers on earthquake responses of a base-isolated LNG inner tank	114841
Wang, Mingqian / Xu, Qingfeng / Harries, Kent A. / Chen, Lingzhu / Wang, Zhenpeng / Chen, Xi	Experimental study on mechanical performance of shear connections in CLT-concrete composite floor	114842
Tan, Yu / Lv, Liang-Sheng / Zhang, Da-wei / Jin, Wei-liang / Fang, Ming-shan / Li, Sheng-hui	Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure	114758
Trujillo, Pasquale Basso / Lagier, Fabien / Jolin, Marc / Massicotte, Bruno / Bissonnette, Benoît	Finite element model of beam-end specimen with different qualities of reinforcing bar encapsulation	114789
Pitilakis, Dimitris / Petridis, Christos	Fragility curves for existing reinforced concrete buildings, including soil–structure interaction and site amplification effects	114733
Upadhyay, A. / Pantelides, C. P.	Fragility-informed seismic design of multi-column bridge bents with post-tensioned concrete columns for accelerated bridge construction	114807
Zhu, Miaochang / Li, Xiaoda / Deng, Jun / Ye, Zhoujian	Generalized evaluation of the effects of wet/dry cycling on CFRP-concrete bond subjected to low-cycle fatigue loading	114762
Oliveto, Nicholas D.	Geometrically nonlinear analysis of friction pendulum systems under tri-directional excitation	114770
Liu, Hao / Han, Jie / Parsons, Robert L.	Geosynthetic reinforcement of backfill behind integral abutments to mitigate approach slab distresses	114772
Li, Yu / Lai, Yaping / Lu, Gan / Yan, Fucheng / Wei, Peng / Xie, Yi Min	Innovative design of long-span steel–concrete composite bridge using multi-material topology optimization	114838
Shamlooei, Majid / Zanon, Gabriele / Valli, Alberto / Bison, Paolo / Bursi, Oreste S.	Investigation of thermal behaviour of structural steel S235N under laser cutting process: Experimental, analytical, and numerical studies	114754
Fang, Cheng / Ping, Yiwei / Gao, Yuqing / Zheng, Yue / Chen, Yiyi	Machine learning-aided multi-objective optimization of structures with hybrid braces – Framework and case study	114808
Pantò, B. / Grosman, S. / Macorini, L. / Izzuddin, B. A.	A macro-modelling continuum approach with embedded discontinuities for the assessment of masonry arch bridges under earthquake loading	114722
Santana, M. V. B. / Hjiaj, M. / Berke, P. Z.	Modal analysis of a bistable deployable module with a refined joint model	114798
Zhu, Shiyao / Zhang, Y. X. / Lee, C. K.	A new finite element procedure for simulation of flexural fatigue behaviours of hybrid engineered cementitious composite beams	114839
Xu, Chi / Ni, Yi-Qing / Wang, You-Wu	A novel Bayesian blind source separation approach for extracting non-stationary and discontinuous components from structural health monitoring data	114837
Lou, Ting / Wang, Wei	Post-fire seismic behaviour of a self-centring connection with buckling-restrained plates and pre-stressed bars	114814
Nguyen, Ngoc-Hien / Tong, Kien T. / Lee, Seunghye / Karamanli, Armagan / Vo, Thuc P.	Prediction compressive strength of cement-based mortar containing metakaolin using explainable Categorical Gradient Boosting model	114768
Bianchi, Simona / Ciurlanti, Jonathan / Overend, Mauro / Pampanin, Stefano	A probabilistic-based framework for the integrated assessment of seismic and energy economic losses of buildings	114852
Wang, Chang / Li, Rui / Zhu, Zicai / Hui Wu, Jiu / Ma, Fuyin	A PVC plasticization electrically active laminated metamaterial with tunable sound insulating performance	114777
Elkady, Ahmed	Response characteristics of flush end-plate connections	114856
Zhou, Yi / Tang, Lingjie / Liu, Kaiqi / Hu, Bin / Li, Yinglei	Second-order improved refined plastic hinge method for high strength steel box-section columns under cyclic loads	114819
Zhou, Xuhong / Xu, Tianxiang / Liu, Jiepeng / Wang, Xuanding / Chen, Y. Frank	Seismic performance of concrete-encased column connections for concrete filled thin-walled steel tube piers	114803
Luo, Zheng / Wang, Yinhui / Wang, Tao	Shear behavior of epoxy joints in precast segmental bridges under impact loading	114641
Aquino, Caroline D. / Rodrigues, Leonardo G. / Branco, Jorge M. / Gomes, Wellison J. S.	Statistical correlation investigation of a single-doweled timber-to-timber joint	114810
Torres-Alves, G. A. / ’t Hart, C. M. P. / Morales-Nápoles, O. / Jonkman, S. N.	Structural reliability analysis of a submerged floating tunnel under copula-based traffic load simulations	114752
Yin, Fei / Yang, Lu / Xu, Kelong / Wang, Jie / Fan, Junwei	Tests, numerical study and design of Q1100 ultra-high strength steel welded I-section stub columns	114812
Freitas, Mario / Ben Ftima, Mahdi / Léger, Pierre / Bouaanani, Najib	Three-dimensional failure envelope of concrete dam shear keys	114766
Wu, Chih-Ping / Hung, Yi-Chen	Three-dimensional free vibration analysis of functionally graded graphene platelets-reinforced composite toroidal shells	114795
Chen, Xu / Zhao, Lin / Zhao, Shiyu / Ke, Shitang / Cao, Shuyang / Ge, Yaojun	Tornado-induced collapse analysis of a super-large reinforced concrete cooling tower	114834
Zhou, Kang / Li, Qiu-Sheng	Vibration mitigation performance of active tuned mass damper in a super high-rise building during multiple tropical storms	114840

Auteur(s)

Titre

Page(s)

Jiang, Qing / Wang, Hanqin / Feng, Yulong / Chong, Xun / Huang, Junqi / Wang, Shaoying / Zhou, Yating

Analysis and experimental testing of a self-centering controlled rocking wall with buckling-restrained braces at base

114843

Alotaibi, Khalid Saqer / AbdelRahman, Belal / Galal, Khaled

Analytical study and design approach of the axial and flexural response of reinforced masonry columns confined with FRP jackets

114805

Ma, Gao / Wu, Cheng / Hwang, Hyeon-Jong / Bai, Jiulin / Zeng, Zhihu

Bahavior of pre-damaged normal-strength concrete prisms repaired with basalt FRP sheets under axial compressive monotonic and repeated loading

114786

Yao, Xiao-Jun / Yi, Ting-Hua / Zhao, Shao-Wei

Blind modal identification for decentralized sensor network by modified sparse component analysis in frequency-domain subspace

114794

Huang, Hanhui / Chen, Kangming / Wu, Qingxiong / Nakamura, Shozo

Calculation method for the torsional bearing capacity of composite girders with CSW-CFST truss chords

114830

Liu, Yunfei / Zhu, Runze / Qin, Zhaoye / Chu, Fulei

A comprehensive study on vibration characteristics of corrugated cylindrical shells with arbitrary boundary conditions

114818

Zhang, Rui / Zhao, Ran / Liu, Zhenlun / Chen, Kedao / Hu, Peng / Liu, Zhanhui

Cyclic behavior of existing flexure-dominated RC bridge columns retrofitted by ECC jackets in the region of plastic hinge

114820

Hu, Meng / Xu, Yude / Li, Shaozheng / Lu, Hongyao

Detection of defect in ballastless track based on impact echo method combined with improved SAFT algorithm

114779

Grabke, Stefan / Bletzinger, Kai-Uwe / Wüchner, Roland

Development of a finite element-based damage localization technique for concrete by applying coda wave interferometry

114585

Cicione, Antonio / Walls, Richard

The effect of shear connectors on the strength, serviceability and dynamic response of composite floors using cold-formed steel beams and concrete in decking

114806

Sagar Varma Sagi, Murali / Lakavath, Chandrashekhar / Prakash, S. Suriya

Effect of steel fibers on the shear behavior of Self-Compacting reinforced concrete deep Beams: An experimental investigation and analytical model

114802

Klein, Fabian / Marx, Steffen

Effects of warping shear deformation on the torsional load-bearing behaviour of assembled half-shell structures for wind energy towers

114728

Yu, Qian-Qian / Wu, Jie-Ying / Gu, Xiang-Lin / Zhou, Fang-Yuan

Experimental study on effects of U-shape dampers on earthquake responses of a base-isolated LNG inner tank

114841

Wang, Mingqian / Xu, Qingfeng / Harries, Kent A. / Chen, Lingzhu / Wang, Zhenpeng / Chen, Xi

Experimental study on mechanical performance of shear connections in CLT-concrete composite floor

114842

Tan, Yu / Lv, Liang-Sheng / Zhang, Da-wei / Jin, Wei-liang / Fang, Ming-shan / Li, Sheng-hui

Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure

114758

Trujillo, Pasquale Basso / Lagier, Fabien / Jolin, Marc / Massicotte, Bruno / Bissonnette, Benoît

Finite element model of beam-end specimen with different qualities of reinforcing bar encapsulation

114789

Pitilakis, Dimitris / Petridis, Christos

Fragility curves for existing reinforced concrete buildings, including soil–structure interaction and site amplification effects

114733

Upadhyay, A. / Pantelides, C. P.

Fragility-informed seismic design of multi-column bridge bents with post-tensioned concrete columns for accelerated bridge construction

114807

Zhu, Miaochang / Li, Xiaoda / Deng, Jun / Ye, Zhoujian

Generalized evaluation of the effects of wet/dry cycling on CFRP-concrete bond subjected to low-cycle fatigue loading

114762

Oliveto, Nicholas D.

Geometrically nonlinear analysis of friction pendulum systems under tri-directional excitation

114770

Liu, Hao / Han, Jie / Parsons, Robert L.

Geosynthetic reinforcement of backfill behind integral abutments to mitigate approach slab distresses

114772

Li, Yu / Lai, Yaping / Lu, Gan / Yan, Fucheng / Wei, Peng / Xie, Yi Min

Innovative design of long-span steel–concrete composite bridge using multi-material topology optimization

114838

Shamlooei, Majid / Zanon, Gabriele / Valli, Alberto / Bison, Paolo / Bursi, Oreste S.

Investigation of thermal behaviour of structural steel S235N under laser cutting process: Experimental, analytical, and numerical studies

114754

Fang, Cheng / Ping, Yiwei / Gao, Yuqing / Zheng, Yue / Chen, Yiyi

Machine learning-aided multi-objective optimization of structures with hybrid braces – Framework and case study

114808

Pantò, B. / Grosman, S. / Macorini, L. / Izzuddin, B. A.

A macro-modelling continuum approach with embedded discontinuities for the assessment of masonry arch bridges under earthquake loading

114722

Santana, M. V. B. / Hjiaj, M. / Berke, P. Z.

Modal analysis of a bistable deployable module with a refined joint model

114798

Zhu, Shiyao / Zhang, Y. X. / Lee, C. K.

A new finite element procedure for simulation of flexural fatigue behaviours of hybrid engineered cementitious composite beams

114839

Xu, Chi / Ni, Yi-Qing / Wang, You-Wu

A novel Bayesian blind source separation approach for extracting non-stationary and discontinuous components from structural health monitoring data

114837

Lou, Ting / Wang, Wei

Post-fire seismic behaviour of a self-centring connection with buckling-restrained plates and pre-stressed bars

114814

Nguyen, Ngoc-Hien / Tong, Kien T. / Lee, Seunghye / Karamanli, Armagan / Vo, Thuc P.

Prediction compressive strength of cement-based mortar containing metakaolin using explainable Categorical Gradient Boosting model

114768

Bianchi, Simona / Ciurlanti, Jonathan / Overend, Mauro / Pampanin, Stefano

A probabilistic-based framework for the integrated assessment of seismic and energy economic losses of buildings

114852

Wang, Chang / Li, Rui / Zhu, Zicai / Hui Wu, Jiu / Ma, Fuyin

A PVC plasticization electrically active laminated metamaterial with tunable sound insulating performance

114777

Elkady, Ahmed

Response characteristics of flush end-plate connections

114856

Zhou, Yi / Tang, Lingjie / Liu, Kaiqi / Hu, Bin / Li, Yinglei

Second-order improved refined plastic hinge method for high strength steel box-section columns under cyclic loads

114819

Zhou, Xuhong / Xu, Tianxiang / Liu, Jiepeng / Wang, Xuanding / Chen, Y. Frank

Seismic performance of concrete-encased column connections for concrete filled thin-walled steel tube piers

114803

Luo, Zheng / Wang, Yinhui / Wang, Tao

Shear behavior of epoxy joints in precast segmental bridges under impact loading

114641

Aquino, Caroline D. / Rodrigues, Leonardo G. / Branco, Jorge M. / Gomes, Wellison J. S.

Statistical correlation investigation of a single-doweled timber-to-timber joint

114810

Torres-Alves, G. A. / ’t Hart, C. M. P. / Morales-Nápoles, O. / Jonkman, S. N.

Structural reliability analysis of a submerged floating tunnel under copula-based traffic load simulations

114752

Yin, Fei / Yang, Lu / Xu, Kelong / Wang, Jie / Fan, Junwei

Tests, numerical study and design of Q1100 ultra-high strength steel welded I-section stub columns

114812

Freitas, Mario / Ben Ftima, Mahdi / Léger, Pierre / Bouaanani, Najib

Three-dimensional failure envelope of concrete dam shear keys

114766

Wu, Chih-Ping / Hung, Yi-Chen

Three-dimensional free vibration analysis of functionally graded graphene platelets-reinforced composite toroidal shells

114795

Chen, Xu / Zhao, Lin / Zhao, Shiyu / Ke, Shitang / Cao, Shuyang / Ge, Yaojun

Tornado-induced collapse analysis of a super-large reinforced concrete cooling tower

114834

Zhou, Kang / Li, Qiu-Sheng

Vibration mitigation performance of active tuned mass damper in a super high-rise building during multiple tropical storms

114840

Publicité

Engineering Structures - octobre 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - octobre 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.