Engineering Structures - janvier 2022

Publié:	janvier 2022

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
McMullen, Kevin F. / Zaghi, Arash E.	An Accelerated repair method for steel girders with severe end corrosion damage	113493
Asadpour, Ghasem / Asadi, Payam / Hajirasouliha, Iman	Analysis of bilinear hysteretic structures with nonlinear fluid viscous dampers using modified stochastic linearization technique	113555
Moreira, Luís Eustáquio / Seixas, Mario	Analysis of the bending behavior of bamboo culms with a full longitudinal crack	113501
Xiang, Yang / Guo, Jia / Kishiki, Shoichi	Analytical approach for vertical floor acceleration of regular RC frames under earthquake excitation	113546
Orynyak, Igor / Mazuryk, Roman	Application of method of discontinuous basic and enhanced smoothing solutions for 3D multibranched cable	113582
Yao, Xiao-Jun / Yi, Ting-Hua / Qu, Chun-Xu	Autoregressive spectrum-guided variational mode decomposition for time-varying modal identification under nonstationary conditions	113543
Sheikh, Hediyeh / Ruparathna, Rajeev / Van Engelen, Niel C.	Bi-directional loading of unbonded rectangular fiber-reinforced elastomeric isolators	113500
Liu, Chengyin / Gong, Yi / Jiang, Zhaoshuo / Guo, Kai	Buffeting analysis of a suspension bridge under construction based on adjacent wind field data	113490
Qin, Wei-feng / Shi, Jun-Yang / Yang, Xiaoyue / Xie, Jiming / Zuo, Steve	Characteristics of wind loads on Twin-Tower structure in comparison with single tower	112780
Scattarreggia, Nicola / Salomone, Roberto / Moratti, Matteo / Malomo, Daniele / Pinho, Rui / Calvi, Gian Michele	Collapse analysis of the multi-span reinforced concrete arch bridge of Caprigliola, Italy	113375
Oñate, Eugenio / Cornejo, Alejandro / Zárate, Francisco / Kashiyama, Kazuo / Franci, Alessandro	Combination of the finite element method and particle-based methods for predicting the failure of reinforced concrete structures under extreme water forces	113510
Boulaud, R. / Douthe, C.	A comparative assessment of ASM4 rockfall barrier modelling	113512
Seara-Paz, Sindy / González-Fonteboa, Belén / Martínez-Abella, Fernando / Eiras-López, Javier	Deformation recovery of reinforced concrete beams made with recycled coarse aggregates	113482
Sohn, Junghoon / Choi, Insub / Kim, JunHee	Development of limit states for seismic fragility assessment of piloti-type structures verified with observed damage data	113562
Zhao, Wuchao / Ye, Jihong	Dynamic behavior and damage assessment of RC columns subjected to lateral soft impact	113476
Meng, Dongliang / Yang, Menggang / Yang, Ziqi / Chouw, Nawawi	Effect of earthquake-induced transverse poundings on a 32 m span railway bridge isolated by friction pendulum bearings	113538
Zhang, Yangxi / Li, Tong / Deng, Mingke	Effect of splitting bond on shear response of reinforced engineered cementitious composite short columns under cyclic loading	113474
Qian, Kai / Geng, Song-Yuan / Liang, Shi-Lin / Fu, Feng / Yu, Jun	Effects of loading regimes on the structural behavior of RC beam-column sub-assemblages against disproportionate collapse	113470
Quan, Chunyan / Walport, Fiona / Gardner, Leroy	Equivalent imperfections for the out-of-plane stability design of steel beams by second-order inelastic analysis	113481
Zhou, Jingyang / Wang, Xin / Peng, Zheqi / Wu, Zhishen / Zhu, Zhongguo	Evaluation of a large-tonnage FRP cable anchor system: Anchorage design and full-scale experiment	113551
Jin, Shuangshuang / Wang, Qiuyun / Zhou, Jie / Bai, Jiulin	Experimental and numerical investigation of assembled multi-grid corrugated steel plate shear walls	113544
Mustafa, Shozab / Singh, Shantanu / Hordijk, Dick / Schlangen, Erik / Luković, Mladena	Experimental and numerical investigation on the role of interface for crack-width control of hybrid SHCC concrete beams	113378
Albright, Ann / Argentoni, Alessio / Calvi, Paolo M.	Experimental behavior of interior and exterior steel-concrete composite NPS® beam-column joints	113589
He, Wenfu / Xu, Hao / Xu, Zidong / Liu, Wenguang	Experimental investigation and earthquake response analysis of a multilayer viscous damping wall with amplified deformation	113427
Verderame, Gerardo M. / Ricci, Paolo / De Risi, Maria Teresa / Del Gaudio, Carlo	Experimental response of unreinforced exterior RC joints strengthened with prestressed steel strips	113358
Hassan, Rafea F. / Al-Salim, Nabeel H. / Mohammed, Nisreen S. / Hussein, Husam H.	Experimental study and theoretical prediction on torsional strength with different steel fiber reinforced concretes and Cross-Section areas	113559
Wang, F. / Liu, J. B. / Bao, X. / Li, S. T. / An, Z. Y.	Experimental study of the resistance of RC walls with different transverse reinforcements subjected to large-scale rigid projectile impacts	113558
Shi, Yu / Luo, Zeqiao / Xu, Yunpeng / Zou, Yuxuan / Xu, Lei / Ma, Quantao	Experimental study on the seismic behavior of high-performance cold-formed steel plate shear walls	113552
Qing, Yuan / Wang, Chun-Lin / Meng, Shaoping / Zeng, Bin	Experimental study on the seismic performance of precast concrete columns with thread-bolt combination couplers	113461
Araya, Raúl / Montaño, Jairo / Guindos, Pablo	Experimental Test of The Gap Reinforced Fastened Connection (GRFC): A highly stiff and ductile reinforced connection concept with reduced pinching for timber structures	113584
Yu, Ding-Hao / Li, Gang / Dong, Zhi-Qian / Li, Hong-Nan	A fast and accurate method for the seismic response analysis of reinforced concrete frame structures considering Beam-Column joint deformation	113401
Du, Panwei / Yang, Yaowen / Tan, Kang Hai	Fire behaviour and design of hybrid fibre reinforced high-performance concrete columns subjected to uniaxial bending	113425
Qiu, Minghong / Shao, Xudong / Yan, Banfu / Zhu, Yanping / Chen, Yanliang	Flexural behavior of UHPC joints for precast UHPC deck slabs	113422
Im, Chae-Rim / Yang, Keun-Hyeok / Kim, Sanghee / Mun, Ju-Hyun	Flexural performance of lightweight aggregate concrete columns	113545
Mandor, Ahmed / El Refai, Ahmed	Flexural response of reinforced concrete continuous beams strengthened with fiber-reinforced cementitious matrix (FRCM)	113557
Chiang, Yu-Chou / Borgart, Andrew	A form-finding method for membrane shells with radial basis functions	113514
Joyce, Tom / Chui, Ying Hei	Group effects in axially loaded self-tapping screw connections	113537
Guin, William E. / Wang, Jialai	A hybrid analytical–numerical approach for the determination of strain energy release rates in shear deformable functionally graded plates	113541
Allam, M. N. M. / Radwan, Ahmed F. / Sobhy, Mohammed	Hygrothermal deformation of spinning FG graphene sandwich cylindrical shells having an auxetic core	113433
Di, Jin / Fan, Jiuhong / Zhou, Xuhong / Zhao, Lijun / Han, Bin / Qin, Fengjiang / Zhang, Zhigang	Hysteretic behavior of composite bridge columns with plastic hinge enhanced by engineered cementitious composite jacket for seismic resistance	113532
Abdul-Hamid, Aliu / Braimah, Abass / Tai, Fred	Impact load effects on screw anchors in concrete	113491
Cui, Liuliang / Zhang, Xihong / Hao, Hong / Kong, Qingzhao	Improved resistance functions for RC elements accounting for compressive and tensile membrane actions	113549
de Sousa, Christoph / Barros, Joaquim A. O. / Correia, João R.	In-plane cyclic behaviour of RC frames strengthened with composite sandwich panels	113529
Morales, Cesar A.	Inerter-added transmissibility to control base displacement in isolated structures	113564
Aydin, Beyazit B. / Binici, Baris / Hendriks, Max A. N. / Tuncay, Kagan	Lattice modeling and testing of aerated autoclaved concrete infilled frames	113467
Van, Tze Che / Lau, Tze Liang / Nazri, Fadzli Mohamed	Macro-modeling approach incorporating fiber plastic hinge for reinforced concrete frames with masonry infill	113421
Manco, Miguel R. / Vaz, Murilo A. / Cyrino, Julio C. R. / Liang, Denis A.	Mechanical behavior assessment of FPSO mid-ship repaired stiffened corroded side panels under combined loading	113441
Wang, Qi-Ang / Zhang, Cheng / Ma, Zhan-Guo / Ni, Yi-Qing	Modelling and forecasting of SHM strain measurement for a large-scale suspension bridge during typhoon events using variational heteroscedastic Gaussian process	113554
Alghrir, Yassin / Al-Kroom, Hussein / Schmid, Volker	A new proposal for a grout-tooth connection	113503
Ninh, Dinh Gia / Hoang, Vu Ngoc Viet	A new shell study for dynamical characteristics of nanocomposite shells with various complex profiles – Sinusoidal and cosine shells	113354
Tao, Yuxuan / Huang, Yuan	Numerical investigation on progressive collapse resistance of post-tensioned precast concrete beam-column assemblies under a column-loss scenario	113528
Liu, Xian / Sun, Qihao / Song, Wei / Bao, Yihai	Numerical modeling and parametric study of hybrid fiber-rebar reinforced concrete tunnel linings	113565
Shawki Osman, Hussein / Serror, Mohammed H. / Fathallah, Elsayed	Numerical study on the rotation capacity of SIP-strengthened cold-formed steel beams	113542
Neuner, M. / Hofer, P. / Hofstetter, G.	On the prediction of complex shear dominated concrete failure by means of classical and higher order damage-plasticity continuum models	113506
Minafò, Giovanni / Camarda, Gaetano	An open-source GA framework for optimizing the seismic upgrading design of RC frames through BRBs	113508
Wang, Zixiao / Tsavdaridis, Konstantinos Daniel	Optimality criteria-based minimum-weight design method for modular building systems subjected to generalised stiffness constraints: A comparative study	113472
Zheng, B. T. / Teng, J. G.	A plasticity constitutive model for concrete under multiaxial compression	113435
Zakir Sarothi, Samia / Ahmed, Khondaker Sakil / Khan, Nafiz Imtiaz / Ahmed, Aziz / Nehdi, Moncef L.	Predicting bearing capacity of double shear bolted connections using machine learning	113497
Moshtaghzadeh, Mojtaba / Izadpanahi, Ehsan / Mardanpour, Pezhman	Prediction of fatigue life of a flexible foldable origami antenna with Kresling pattern	113399
Shen, Jiajia / Groh, Rainer M. J. / Wadee, M. Ahmer / Schenk, Mark / Pirrera, Alberto	Probing the stability landscape of prestressed stayed columns susceptible to mode interaction	113465
Gehri, Nicola / Mata-Falcón, Jaime / Kaufmann, Walter	Refined extraction of crack characteristics in large-scale concrete experiments based on digital image correlation	113486
Shen, Xinyu / Li, Bo / Chen, Yung-Tsang / Tizani, Walid / Jiang, Yi	Relocating plastic hinges in reinforced concrete beam-column joints by mechanically anchored diagonal bars	113468
Hippola, H. M. S. S. / Wijesundara, K. K. / Nascimbene, Roberto	Response of shear critical reinforced concrete frames and walls under monotonic loading	113483
Qi, Liangjie / Kurata, Masahiro / Ikeda, Yoshiki	Seismic damage thresholds and design methods for two-elevation continuous ceiling systems	113530
Inamasu, Hiroyuki / Lignos, Dimitrios G.	Seismic performance of steel columns interacting with embedded column bases while exhibiting inelastic deformations	113381
Yin, Tao / Zhang, Feng-Liang	Sensor placement for model identification of multi-story buildings under unknown earthquake ground motion	113548
Vega-Posada, Carlos A. / Gallant, Aaron P. / Carvajal-Muñoz, J. Sebastian	Simplified analytical method for static and stability analysis of circular tapered friction piles	113498
Bruschi, Eleonora / Quaglini, Virginio / Calvi, Paolo M.	A simplified design procedure for seismic upgrade of frame structures equipped with hysteretic dampers	113504
Meng, Xin / Gardner, Leroy	Stability and design of normal and high strength steel CHS beam-columns	113361
Bu, Guobin / Ou, Zhihua / Li, Zhaochao / Liu, Fangcheng / Zheng, Hui / Zou, Xingxing / Xie, Yonggui	Static and buckling characteristics of the porous ring reinforced by graphene nanofillers	113536
Ambiel, José Henrique Krahenbuhl / Brun, Michael / Thibon, Alfred / Gravouil, Anthony	Three-dimensional analysis of eccentric pounding between two-storey structures using explicit non-smooth dynamics	113385
Huang, Hua / Xue, Chunliang / Zhang, Wei / Guo, Mengxue	Torsion design of CFRP-CFST columns using a data-driven optimization approach	113479
Zhang, Zili	Understanding and exploiting the nonlinear behavior of tuned liquid dampers (TLDs) for structural vibration control by means of a nonlinear reduced-order model (ROM)	113524
Shayanfar, Javad / Barros, Joaquim A. / Rezazadeh, Mohammadali	Unified model for fully and partially FRP confined circular and square concrete columns subjected to axial compression	113355

Informations
sur cette fiche
IssueID
60043
Publié(e) le:
30.11.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - janvier 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - janvier 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.