Engineering Structures - octobre 2020

Publié:	octobre 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Gregori, S. / Gil, J. / Tur, M. / Tarancón, J. E. / Fuenmayor, F. J.	Analysis of the overlap section in a high-speed railway catenary by means of numerical simulations	110963
Nguyen, Truong-Thanh / Sorelli, Luca / Brühwiler, Eugen	An Analytical Method to Predict the Structural Behavior of Timber-Concrete Structures With Brittle-to-Ductile Shear Connector Laws	110826
Shakeel, Sarmad / Fiorino, Luigi / Landolfo, Raffaele	Behavior factor evaluation of CFS wood sheathed shear walls according to FEMA P695 for Eurocodes	111042
Khateeb, Baha M. / Siddiqui, Nadeem A. / Almusallam, Tarek H. / Abbas, Husain / Al-Salloum, Yousef A.	Behavior of novel CFST circular column-to-foundation connections under cyclic loading	111051
Li, Shiping / Zhang, Yibei / Chen, Wujun	Bending performance of unbonded prestressed basalt fiber recycled concrete beams	110937
Freitas, Emanuel / Louro, Ana S. / Costa, Hugo / Cavaco, Eduardo S. / Júlio, Eduardo / Pipa, Manuel	Bond behaviour between steel / stainless-steel reinforcing bars and low binder concrete (LBC)	111072
Rabi, Musab. / Cashell, K. A. / Shamass, R. / Desnerck, Pieter	Bond behaviour of austenitic stainless steel reinforced concrete	111027
Lim, Jong-Jin / Eom, Tae-Sung	Compression tests of octagonal concrete-filled thin-walled tube columns	111082
Monge, J. C. / Mantari, J. L. / Arciniega, R. A.	Computational semi-analytical method for the 3D elasticity bending solution of laminated composite and sandwich doubly-curved shells	110938
Leong, Darrell / Low, Ying Min / Kim, Youngkook	Control variates for efficient long-term extreme analysis of mooring lines	111063
Mitra, Soham / Bastani, Amirreza / Das, Sreekanta / Lawn, David	Corroded steel beams with various corrosion aspect ratios – A rehabilitation technique using basalt fibre fabric	111075
Guo, Y. B. / Ho, H. C. / Chung, K. F. / Elghazouli, A. Y.	Cyclic deformation characteristics of S355 and S690 steels under different loading protocols	111093
Ding, Faxing / Liu, Yicen / Lyu, Fei / Lu, Deren / Chen, Jun	Cyclic loading tests of stirrup cage confined concrete-filled steel tube columns under high axial pressure	111048
Alexakis, Haris / Liu, Han / DeJong, Matthew J.	Damage identification of brick masonry under cyclic loading based on acoustic emissions	110945
Pereira, Nuno / Romão, Xavier	Damage localization length in RC frame components: Mechanical analysis and experimental observations	111026
Shahnewaz, Md / Popovski, Marjan / Tannert, Thomas	Deflection of cross-laminated timber shear walls for platform-type construction	111091
Ravindra, Ganesh H. R. / Gronz, Oliver / Dost, Bastial / Sigtryggsdóttir, Fjóla G.	Description of failure mechanism in placed riprap on steep slope with unsupported toe using smartstone probes	111038
Passoni, Chiara / Guo, Jack / Christopoulos, Constantin / Marini, Alessandra / Riva, Paolo	Design of dissipative and elastic high-strength exoskeleton solutions for sustainable seismic upgrades of existing RC buildings	111057
Wang, Lu / Shen, Ruili / Ma, Niujing / Zhang, Songhan / Gu, Lixiong / Wang, Ronghui	Discrete analytical model for lateral mechanical behavior of cable-saddle system in suspension bridges	111087
Wu, Min / Jin, Liu / Du, Xiuli	Dynamic responses and reliability analysis of bridge double-column under vehicle collision	111035
Chavez, Mauricio / Baskaran, Appupillai / Feng, Changda / Chowdhury, Arindam Gan	Effect of assembly construction on the wind induced pressure of membrane roofs	110725
Gentile, Roberto / Nettis, Andrea / Raffaele, Domenico	Effectiveness of the displacement-based seismic performance assessment for continuous RC bridges and proposed extensions	110910
Calabrese, A. / Losanno, D. / Barjani, A. / Spizzuoco, M. / Strano, S.	Effects of the long-term aging of glass-fiber reinforced bearings (FRBs) on the seismic response of a base-isolated residential building	110735
El Boustani, Chadi / Bleyer, Jeremy / Arquier, Mathieu / Ferradi, Mohammed-Khalil / Sab, Karam	Elastoplastic and limit analysis of 3D steel assemblies using second-order cone programming and dual finite-elements	111041
Ruocco, E. / Reddy, J. N. / Wang, C. M.	An enhanced Hencky bar-chain model for bending, buckling and vibration analyses of Reddy beams	111056
Zhai, Zhipeng / Guo, Wei / Yu, Zhiwu / He, Chongjian / Zeng, Zhefeng	Experimental and numerical study of S-shaped steel plate damper for seismic resilient application	111006
Mohammad Moradi, Hadis / Hosseini Hashemi, Behrokh / Jafari, Mohammad Ali	Experimental and numerical study on the cyclic behavior of link-beam shear-panel connected to frame beams	111050
Guan, Minsheng / Wei, Chunqing / Wang, Ying / Lai, Zhichao / Xiao, Qian / Du, Hongbiao	Experimental investigation of axial loaded circular steel tube short columns filled with manufactured sand concrete	111033
Jiang, Zi-qin / Kang, Yi-Tao / Liu, Xue-chun / Cheng, Kui-Kui / Chen, Xin	Experimental study of an earthquake-resilient prefabricated opening-web steel channel beam-to-column joint with flange cover plates	111054
Liu, Yibo / Guo, Zhen / Ding, Jiahui / Wang, Xiangren / Liu, Yi	Experimental study on seismic behaviour of plug-in assembly concrete beam-column connections	111049
Liu, Yang / Li, Xinping / Zheng, Xiaohong / Song, Zhuo	Experimental study on seismic response of precast bridge piers with double-grouted sleeve connections	111023
Liu, Qipeng / Gao, Yuehua / Li, Yonghua / Xue, Qiwen	Fatigue life prediction based on a novel improved version of the Corten-Dolan model considering load interaction effect	111036
Ma, Yafei / Peng, Anyin / Wang, Lei / Zhang, Chenzhong / Li, Jing / Zhang, Jianren	Fatigue performance of an innovative shallow-buried modular bridge expansion joint	111107
Seok, Seungwook / Haikal, Ghadir / Ramirez, Julio A. / Lowes, Laura N. / Lim, Jeehee	Finite element simulation of bond-zone behavior of pullout test of reinforcement embedded in concrete using concrete damage-plasticity model 2 (CDPM2)	110984
Sabbaghian, Mahdieh / Kheyroddin, Ali	Flexural strengthening of RC one way slabs with high-performance fiber-reinforced cementitious composite laminates using steel and GFRP bar	111106
Wakjira, Tadesse G. / Nehdi, Moncef L. / Ebead, Usama	Fractional factorial design model for seismic performance of RC bridge piers retrofitted with steel-reinforced polymer composites	111100
Zhou, Yi / Sun, Limin / Fu, Zhenhui / Jiang, Zhen / Ren, Pengjie	General formulas for estimating temperature-induced mid-span vertical displacement of cable-stayed bridges	111012
Pezeshky, Payam / Sahraei, Arash / Rong, Feng / Sasibut, Siriwut / Mohareb, Magdi	Generalization of the Vlasov theory for lateral torsional buckling analysis of built-up monosymmetric assemblies	111055
Tiberti, Simone / Grillanda, Nicola / Mallardo, Vincenzo / Milani, Gabriele	A Genetic Algorithm adaptive homogeneous approach for evaluating settlement-induced cracks in masonry walls	111073
Zamanian, Soroush / Hur, Jieun / Shafieezadeh, Abdollah	A high-fidelity computational investigation of buried concrete sewer pipes exposed to truckloads and corrosion deterioration	111043
Zou, Guang / Faber, Michael Havbro / González, Arturo / Banisoleiman, Kian	A holistic approach to risk-based decision on inspection and design of fatigue-sensitive structures	110949
Tarozzi, Mirco / Pignagnoli, Giacomo / Benedetti, Andrea	Identification of damage-induced frequency decay on a large-scale model bridge	111039
Mercedes, Luis / Bernat-Maso, Ernest / Gil, Lluís	In-plane cyclic loading of masonry walls strengthened by vegetal-fabric-reinforced cementitious matrix (FRCM) composites	111097
Lima de Resende, Thomás / Cardoso, Daniel C. T. / Shehata, Lidia C. D.	Influence of steel fibers on the dowel action of RC beams without stirrups	111044
Li, Yang / Aoude, Hassan	Influence of steel fibers on the static and blast response of beams built with high-strength concrete and high-strength reinforcement	111031
Marques, Rui / Pereira, João M. / Lourenço, Paulo B.	Lateral in-plane seismic response of confined masonry walls: From numerical to backbone models	111098
Demertzi, M. / Silvestre, J. D. / Durão, V.	Life cycle assessment of the production of composite sandwich panels for structural floor’s rehabilitation	111060
Almustafa, M. K. / Nehdi, M. L.	Machine learning model for predicting structural response of RC slabs exposed to blast loading	111109
Yang, X. / Wang, C. / Lai, S. K.	A magnetic levitation-based tristable hybrid energy harvester for scavenging energy from low-frequency structural vibration	110789
Noroozi, Ahmad Reza / Malekzadeh, Parviz / Dimitri, Rossana / Tornabene, Francesco	Meshfree radial point interpolation method for the vibration and buckling analysis of FG-GPLRC perforated plates under an in-plane loading	111000
Calvert, Gareth / Neves, Luis / Andrews, John / Hamer, Matthew	Modelling interactions between multiple bridge deterioration mechanisms	111059
Manuello, Amedeo	Multi-body rope approach for grid shells: Form-finding and imperfection sensitivity	111029
Pimentel, Júlio Tenório / Marques Ferreira, Adriano Dayvson / de Siqueira Motta, Renato / Figueiroa da Silva Cabral, Marco Antonio / Maria Bastos Afonso, Silvana / Brito Willmersdorf, Ramiro / Maciel Lyra, Paulo Roberto / de Andrade, Edmundo Queiroz / da Silveira Cunha, Divino José	New procedure of automatic modeling of pipelines with realistic shaped corrosion defects	111030
Oliva, Maria / Barone, Giorgio / Lo Iacono, Francesco / Navarra, Giacomo	Nonlinear energy sink and Eurocode 8: An optimal design approach based on elastic response spectra	111020
Kim, Jae H. / Moravej, Mohammadtaghi / Sutley, Elaina J. / Chowdhury, Arindam / Dao, Thang N.	Observations and analysis of wind pressures on the floor underside of elevated buildings	111101
Skoglund, Oskar / Leander, John / Karoumi, Raid	Optimizing the steel girders in a high strength steel composite bridge	110981
Yurov, V. O. / Nedin, R. D. / Vatulyan, A. O.	Oscillations of a non-uniform finite hollow cylinder under conditions of complex prestressed state	111019
Al-Qaralleh, Mohammad / Toutanji, Houssam / Eljufout, Tamer	Overloading impact on the flexural behavior of RC beams strengthened with FRP composites under fatigue: Experimental study	111045
Dai, Jun / Xu, Zhao-Dong / Gai, Pan-Pan	Parameter determination of the tuned mass damper mitigating the vortex-induced vibration in bridges	111084
Matti, Feleb N. / Mashiri, Fidelis R.	Parametric study on SCFs of SHS-SHS T-joint connections under out-of-plane brace bending	111032
Moustafa, Ayman / ElGawady, Mohamed A.	Performance of double skin FRP-concrete-steel self-centered segmental bridge piers subjected to forward-directivity near-fault ground motion	111065
Galuppi, Laura	Practical expressions for the design of DGUs. The BAM approach	110993
Wang, Zijun / Martinez-Vazquez, Pedro / Zhao, Boming	Pushover analysis of structures subjected to combined actions of earthquake and wind	111034
Corradi, Marco / Castori, Giulio / Borri, Antonio	Repairing brickwork panels using titanium rods embedded in the mortar joints	111099
Maureira-Carsalade, N. / Pardo, E. / Oyarzo-Vera, C. / Roco, A.	A roller type base isolation device with tensile strength	111003
Hashemi, Ashkan / Zarnani, Pouyan / Quenneville, Pierre	Seismic assessment of rocking timber walls with energy dissipation devices	111053
Jia, Junfeng / Zhang, Kaidi / Wu, Suiwen / Guo, Yang / Du, Xiuli / Wang, Xu	Seismic performance of self-centering precast segmental bridge columns under different lateral loading directions	111037
Liu, Xiang / Jiang, Lizhong / Lai, Zhipeng / Xiang, Ping / Chen, Yuanjun	Sensitivity and dynamic analysis of train-bridge coupled system with multiple random factors	111083
Karimipour, Arash / Edalati, Mahmoud	Shear and flexural performance of low, normal and high-strength concrete beams reinforced with longitudinal SMA, GFRP and steel rebars	111086
Gao, Danying / Zhang, Changhui	Shear strength calculating model of FRP bar reinforced concrete beams without stirrups	111025
Cladera, Antoni / Montoya-Coronado, Luis A. / Ruiz-Pinilla, Joaquín G. / Ribas, Carlos	Shear strengthening of slender reinforced concrete T-shaped beams using iron-based shape memory alloy strips	111018
Vega-Posada, Carlos A. / Gallant, Aaron P. / Areiza-Hurtado, Mauricio	Simple approach for analysis of beam-column elements on homogeneous and non-homogeneous elastic soil	111110
Bilotta, Antonio / Compagnone, Alberto / Esposito, Laura / Nigro, Emidio	Structural behaviour of FRP reinforced concrete slabs in fire	111058
Han, Ziping / Brownjohn, J. M. W. / Chen, Jun	Structural modal testing using a human actuator	111113
Zani, Giulio / Martinelli, Paolo / Galli, Andrea / di Prisco, Marco	Three-dimensional modelling of a multi-span masonry arch bridge: Influence of soil compressibility on the structural response under vertical static loads	110998
Shi, Yan / Zhong, Zhengwu / Qin, Hongguo / Han, Jianping / Sun, Zhiguo	Toggle buckling-restrained brace systems and a corresponding design method for the seismic retrofit of bridge bents	110996
Zhang, Zili / Fitzgerald, Breiffni	Tuned mass-damper-inerter (TMDI) for suppressing edgewise vibrations of wind turbine blades	110928
Nodargi, Nicola A. / Bisegna, Paolo	A unifying computational approach for the lower-bound limit analysis of systems of masonry arches and buttresses	110999

Informations
sur cette fiche
IssueID
37302
Publié(e) le:
12.07.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - octobre 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - octobre 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.