Engineering Structures - juillet 2020

Publié:	juillet 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
García-Macías, Enrique / Ubertini, Filippo	Automated operational modal analysis and ambient noise deconvolution interferometry for the full structural identification of historic towers: A case study of the Sciri Tower in Perugia, Italy	110615
Zaki, Mohammed A. / Rasheed, Hayder A.	Behavior of reinforced concrete beams strengthened using CFRP sheets with innovative anchorage devices	110689
Zhu, Bo-Li / Guo, Yan-Lin / Gao, Jun-Kai / Pi, Yong-Lin	Behaviour and design of spatial triple-truss-confined BRBs with a longitudinal shuttle shape	110605
El-Hacha, Raafat / Abdelrahman, Khaled	Behaviour of circular SMA-confined reinforced concrete columns subjected to eccentric loading	110443
Oudah, Fadi / El-Hacha, Raafat	Damage and deformation assessment of earthquake-resistant RC slotted beam-column connections using digital image correlation technique	110442
El-Sisi, Alaa El-Din A. / El-Emam, Hesham M. / Salim, Hani A. / Sallam, Hossam El-Din M.	Deformation and load transfer analysis of staggered composite-steel lap joints subjected to progressive damage	110690
Dong, Wenchen / Li, Minghao / Ottenhaus, Lisa-Mareike / Lim, Hyungsuk	Ductility and overstrength of nailed CLT hold-down connections	110667
Shin, Dong Ik / Haroon, Muhammad / Yoon, Sung Hyun / Lee, Jung-Yoon	Effect of deviation angle between principal stress and diagonal reinforcement direction on seismic performance of RC coupling beams	110618
Estrella, Xavier / Guindos, Pablo / Almazán, José Luis / Malek, Sardar	Efficient nonlinear modeling of strong wood frame shear walls for mid-rise buildings	110670
Zhu, Yazhi / Kanvinde, Amit	Estimating the evolution of strain induced by inelastic cyclic local buckling in steel beam-columns	110708
Rodríguez-Mariscal, J. D. / Ma, Q. / Solís, M.	Experimental analysis of diagonal compression and splitting tests for the characterization of shear and tensile behavior of adobe masonry	110633
Zou, Xingxing / Feng, Peng / Bao, Yi / Wang, Jingquan / Xin, Haohui	Experimental and analytical studies on shear behaviors of FRP-concrete composite sections	110649
Wang, Fangying / Liang, Yating / Zhao, Ou	Experimental and numerical studies of pin-ended press-braked S960 ultra-high strength steel channel section columns	110629
Zhang, Yujie / Liu, Airong / Chen, Bingcong / Zhang, Junping / Pi, Yong-Lin / Bradford, Mark A.	Experimental and numerical study of shear connection in composite beams of steel and steel-fibre reinforced concrete	110707
Zhang, Ying / Wang, Yuanqing / Wang, Zhongxing / Bu, Yidu / Fan, Shenggang / Zheng, Baofeng	Experimental investigation and numerical analysis of pin-ended extruded aluminium alloy unequal angle columns	110694
Huang, Baofeng / Fu, Shuai / Lu, Wensheng / Günay, Selim	Experimental investigation of the breaking load of a dowel-pinned connection in granite cladding	110642
Wang, Chun-Lin / Lyu, Jiafeng / Zhao, Jing / Yang, Huifeng	Experimental investigation of the shear characteristics of steel-to-timber composite joints with inclined self-tapping screws	110683
Wang, Jia-Ji / Nie, Xin / Bu, Fan-Min / Tao, Mu-Xuan / Fan, Jian-Sheng	Experimental study and design method of shear-dominated composite plate shear walls	110656
Liu, Jiepeng / Hu, Huifeng / Li, Jiang / Chen, Y. Frank / Zhang, Li	Flexural behavior of prestressed concrete composite slab with precast inverted T-shaped ribbed panels	110687
Ryu, Jaeho / Lho, Seung-Hee / Lee, Chang-Hwan / Ju, Young K.	Flexural behavior of prestressed sandwich plate system composite beams	110705
Sivaprakasam, T. / Kesawan, S. / Mahendran, M. / Stringfellow, J. / Baleshan, B.	Full-scale tests of aluminium mullion couples in unitized facades under wind actions	110653
Mayencourt, Paul / Mueller, Caitlin	Hybrid analytical and computational optimization methodology for structural shaping: Material-efficient mass timber beams	110532
Medina, C. / Álamo, G. M. / Aznárez, J. J. / Padrón, L. A. / Maeso, O.	Influence of soil non-homogeneity on the base shear force of piled structures subjected to harmonic seismic waves	110658
Faiella, Diana / Mele, Elena	Insights into inter-story isolation design through the analysis of two case studies	110660
Kong, Siyu / Zhuang, Liangdong / Tao, Muxuan / Fan, Jiansheng	Load distribution factor for moment of composite bridges with multi-box girders	110716
Lopez-Caballero, F. / Aristizábal, C. / Sanchez-Silva, M.	A model to estimate the lifetime of structures located in seismically active regions	110662
Giaccu, Gian Felice	Modeling a gyroscopic stabilizer for the improvement of the dynamic performances of slender monopole towers	110607
Valeri, Patrick / Ruiz, Miguel Fernández / Muttoni, Aurelio	Modelling of Textile Reinforced Concrete in bending and shear with Elastic-Cracked Stress Fields	110664
Hongmei, Zhang / Liumeng, Quan / Xilin, LU / Jiaqi, Xu	Modified flag-shaped model for self-centering system and its equivalent linearization and structural optimization for stochastic excitation	110420
Alabbasi, Sateh / Hussein, Mohammed / Abdeljaber, Osama / Avci, Onur	A numerical and experimental investigation of a special type of floating-slab tracks	110734
Bolisetti, Chandrakanth / Whittaker, Andrew S.	Numerical investigations of structure-soil-structure interaction in buildings	110709
Zhang, Ruiyang / Liu, Yang / Sun, Hao	Physics-guided convolutional neural network (PhyCNN) for data-driven seismic response modeling	110704
Parackal, Korah I. / Ginger, John D. / Henderson, David J.	Progressive failures of batten to rafter connections under fluctuating wind loads	110684
Leblouba, Moussa / Tabsh, Sami W.	Reliability-based shear design of corrugated web steel beams for AISC 360 specification and CSA-S16 standard	110617
Brandonisio, Giuseppe / Angelillo, Maurizio / De Luca, Antonello	Seismic capacity of buttressed masonry arches	110661
Zhu, Jing-Shen / Guo, Yan-Lin / Wang, Meng-Zheng / Yang, Xiao / Pi, Yong-Lin	Seismic performance of concrete-infilled double steel corrugated-plate walls: Experimental research	110601
Wang, Jingjing / Wang, Bin / Liu, Zhibin / Li, Haobo / Zhang, Chao	Seismic response mitigation of building structures with a novel vibro-impact dual-mass damper	110673
Misseri, G. / Palazzi, C. / Rovero, L.	Seismic vulnerability of timber-reinforced earthen structures through standard and non–standard limit analysis	110663
Zhang, Qiang / Zhao, Yan-Gang / Kolozvari, K. / Xu, Lei	Simplified model for assessing progressive collapse resistance of reinforced concrete frames under an interior column loss	110688
Van Do, Vuong Nguyen / Lee, Chin-Hyung	Static bending and free vibration analysis of multilayered composite cylindrical and spherical panels reinforced with graphene platelets by using isogeometric analysis method	110682
Paris, Vittorio / Pizzigoni, Attilio / Adriaenssens, Sigrid	Statics of self-balancing masonry domes constructed with a cross-herringbone spiraling pattern	110440
Kinnane, Oliver / West, Roger / Hegarty, Richard O.	Structural shear performance of insulated precast concrete sandwich panels with steel plate connectors	110691
Aloisio, Angelo / Alaggio, Rocco / Fragiacomo, Massimo	Time-domain identification of the elastic modulus of simply supported box girders under moving loads: Method and full-scale validation	110619
Lacroix, Daniel / Doudak, Ghasan	Towards enhancing the post-peak performance of glued-laminated timber beams using multi-directional fibre reinforced polymers	110680

Informations
sur cette fiche
IssueID
36750
Publié(e) le:
02.05.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - juillet 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - juillet 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.