Engineering Structures - janvier 2019

Publié:	janvier 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Ma, Cunming / Wang, Junxin / Li, Q. S. / Liao, Haili	3D aerodynamic admittances of streamlined box bridge decks	321-331
Penadés-Plà, Vicent / García-Segura, Tatiana / Yepes, Víctor	Accelerated optimization method for low-embodied energy concrete box-girder bridge design	556-565
Hariri-Ardebili, Mohammad Amin / Mahdi Seyed-Kolbadi, S. / Saouma, Victor E. / Salamon, Jerzy W. / Nuss, Larry K.	Anatomy of the vibration characteristics in old arch dams by random field theory	460-475
Li, Weijie / Liang, Hongjun / Lu, Yiyan / Xue, Jifeng / Liu, Zhenzhen	Axial behavior of slender RC square columns strengthened with circular steel tube and sandwiched concrete jackets	423-437
Fan, Yi / Chen, Li / Fang, Qin / Wang, Tengfei	Blast resistance of externally prestressed RC Beam: A theoretical approach	211-224
Sowiński, K.	Buckling of shells with special shapes with corrugated middle surfaces – FEM study	310-320
Danielsson, Henrik / Jeleč, Mario / Serrano, Erik / Rajčić, Vlatka	Cross laminated timber at in-plane beam loading – Comparison of model predictions and FE-analyses	246-254
Xiang, Yang / Huang, Qing-Long	Damping modification factor for the vertical seismic response spectrum: A study based on Japanese earthquake records	493-511
Tawadrous, Raed / Morcous, George	Design of shear pocket connection in full-depth precast concrete deck systems	367-386
De Domenico, D. / Ricciardi, G.	Earthquake protection of structures with nonlinear viscous dampers optimized through an energy-based stochastic approach	523-539
Zhuang, Haiyang / Fu, Jisai / Yu, Xu / Chen, Su / Cai, Xiaohui	Earthquake responses of a base-isolated structure on a multi-layered soft soil foundation by using shaking table tests	79-91
Kumar, Pankaj / Chaudhary, Sandeep	Effect of reinforcement detailing on performance of composite connections with headed studs	476-492
Chuang, Wei-Chu / Spence, Seymour M. J.	An efficient framework for the inelastic performance assessment of structural systems subject to stochastic wind loads	92-105
Almirall, C. / Petit-Boix, A. / Sanjuan-Delmás, D. / de la Fuente, A. / Pujadas, P. / Josa, A.	Environmental effects of using different construction codes applied to reinforced concrete beam designs based on Model Code 2010 and Spanish Standard EHE-08	438-447
Hajek, Radek / Fladr, Josef / Pachman, Jiri / Stoller, Jiri / Foglar, Marek	An experimental evaluation of the blast resistance of heterogeneous concrete-based composite bridge decks	204-210
Yang, Jianjun / Chen, Huaguo / Hu, Shengliang / Gan, Vincent J. L.	Experimental studies on the flexural behaviour of steel-concrete composite beams with transverse and longitudinal hidden girders	583-594
Li, Ling-Zhi / Liu, Xin / Yu, Jiang-Tao / Lu, Zhou-Dao / Su, Mei-Ni / Liao, Jie-Hong / Xia, Min	Experimental study on seismic performance of post-fire reinforced concrete frames	161-173
Luu, Hieu Cong / Mo, Y. L. / Hsu, Thomas T. C. / Wu, C. L.	FE simulation of cylindrical RC containment structures under reserved cyclic loading	255-267
Casagrande, Lorenzo / Sisinni, Jessica / Bonati, Antonio / Occhiuzzi, Antonio / Auricchio, Ferdinando	Integrated shape memory alloy devices toward a high-performance glazed curtain wall seismic retrofit	540-555
Xu, Jianchao / Diao, Bo / Guo, Quanquan / Ye, Yinghua / Mo, Y. L. / Chen, Hongbing	Interaction of bending, shear and torsion in U-shaped thin-walled RC girders	655-669
Asl, Masoud Hoseinzadeh / Farivar, Behzad / Momenzadeh, Seyedbabak	Investigation of the rigidity of welded shear tab connections	353-366
Zhang, Mengxi / Li, Mingchao / Shen, Yang / Zhang, Jinrui	Isogeometric shape optimization of high RCC gravity dams with functionally graded partition structure considering hydraulic fracturing	341-352
Bu, Yidu / Gardner, Leroy	Laser-welded stainless steel I-section beam-columns: Testing, simulation and design	23-36
Lu, Hanwen / Liu, Airong / Pi, Yong-Lin / Bradford, Mark Andrew / Fu, Jiyang	Lateral-torsional buckling of arches under an arbitrary radial point load in a thermal environment incorporating shear deformations	189-203
García-Illescas, Miguel Angel / Alvarez-Icaza, Luis	Model reduction of shear building models: A quantitative approach for master degrees of freedom selection	512-522
Ferrari, Rosalba / Froio, Diego / Rizzi, Egidio / Gentile, Carmelo / Chatzi, Eleni N.	Model updating of a historic concrete bridge by sensitivity- and global optimization-based Latin Hypercube Sampling	139-160
Li, Xiaopeng / Zhou, Xiaoyong / Tian, Ying / Li, Mo	A modified cyclic constitutive model for engineered cementitious composites	398-411
Nolet, Vincent / Casagrande, Daniele / Doudak, Ghasan	Multipanel CLT shearwalls: an analytical methodology to predict the elastic-plastic behaviour	640-654
Quiel, Spencer E. / Naito, Clay J. / Fallon, Corey T.	A non-emulative moment connection for progressive collapse resistance in precast concrete building frames	174-188
Bypour, Maryam / Gholhaki, Majid / Kioumarsi, Mahdi / Kioumarsi, Benyamin	Nonlinear analysis to investigate effect of connection type on behavior of steel plate shear wall in RC frame	611-624
Keivan, Arshia / Zhang, Yunfeng	Nonlinear seismic performance of Y-type self-centering steel eccentrically braced frame buildings	448-459
Shen, Chao-yong / Chen, Yang-yang / Huang, Xiang-yun / Tan, Pin / Ma, Yu-hong	Numerical and experimental modeling of a new anti-tension equipment for high-rise isolation buildings	129-138
Casagrande, Lorenzo / Bonati, Antonio / Occhiuzzi, Antonio / Caterino, Nicola / Auricchio, Ferdinando	Numerical investigation on the seismic dissipation of glazed curtain wall equipped on high-rise buildings	225-245
Kherbouche, Soumia / Megnounif, Abdellatif	Numerical study and design of thin walled cold formed steel built-up open and closed section columns	670-682
Giunta, Filippo / Cicirello, Alice	On the analysis of jointed Euler-Bernoulli beams with step changes in material and cross-section under static and dynamic loads	66-78
Gusella, Federico / Orlando, Maurizio / Peterman, Kara D.	On the required ductility in beams and connections to allow a redistribution of moments in steel frame structures	595-610
Toopchi-Nezhad, H. / Ghotb, M. R. / Al-Anany, Y. M. / Tait, M. J.	Partially bonded fiber reinforced elastomeric bearings: Feasibility, effectiveness, aging effects, and low temperature response	120-128
Kitayama, Shoma / Constantinou, Michael C.	Probabilistic seismic performance assessment of seismically isolated buildings designed by the procedures of ASCE/SEI 7 and other enhanced criteria	566-582
Sato, Motoshi / Isoda, Hiroshi / Araki, Yasuhiro / Nakagawa, Takafumi / Kawai, Naohito / Miyake, Tatsuya	A seismic behavior and numerical model of narrow paneled cross-laminated timber building	9-22
Greco, Rita / Vanzi, Ivo / Lavorato, Davide / Briseghella, Bruno	Seismic duration effect on damping reduction factor using random vibration theory	296-309
Fattahi, Fayegh / Gholizadeh, Saeed	Seismic fragility assessment of optimally designed steel moment frames	37-51
Zhou, Lianxu / Wang, Xiaowei / Ye, Aijun	Shake table test on transverse steel damper seismic system for long span cable-stayed bridges	106-119
Brenkus, N. R. / Tatar, J. / Hamilton, H. R. / Consolazio, G. R.	Simplified finite element modeling of post-tensioned concrete members with mixed bonded and unbonded tendons	387-397
Kim, Yail J.	State of the practice of FRP composites in highway bridges	1-8
Sahu, Deepak / Nishanth, M. / Dhir, Prateek Kumar / Sarkar, Pradip / Davis, Robin / Mangalathu, Sujith	Stochastic response of reinforced concrete buildings using high dimensional model representation	412-422
Wiesner, Felix / Bisby, Luke A. / Bartlett, Alastair I. / Hidalgo, Juan P. / Santamaria, Simón / Deeny, Susan / Hadden, Rory M.	Structural capacity in fire of laminated timber elements in compartments with exposed timber surfaces	284-295
Siedziako, Bartosz / Øiseth, Ole	Superposition principle in bridge aerodynamics: Modelling of self-excited forces for bridge decks in random vibrations	52-65
Qu, Bing / Dai, Chunxue / Qiu, Jin / Hou, Hetao / Qiu, Canxing	Testing of seismic dampers with replaceable U-shaped steel plates	625-639
Patel, V. I. / Hassanein, M. F. / Thai, Huu-Tai / Al Abadi, H. / Elchalakani, M. / Bai, Y.	Ultra-high strength circular short CFST columns: Axisymmetric analysis, behaviour and design	268-283
Branam, Nathan James / Arcaro, Vinicius / Adeli, Hojjat	A unified approach for analysis of cable and tensegrity structures using memoryless quasi-newton minimization of total strain energy	332-340

Informations
sur cette fiche
IssueID
21497
Publié(e) le:
03.11.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - janvier 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - janvier 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.