Engineering Structures - janvier 2019

Publié:	janvier 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Mourlas, Christos / Markou, George / Papadrakakis, Manolis	Accurate and computationally efficient nonlinear static and dynamic analysis of reinforced concrete structures considering damage factors	258-285
Senjanović, Ivo / Hadžić, Neven / Murawski, Lech / Vladimir, Nikola / Alujević, Neven / Cho, Dae-Seung	Analytical procedures for torsional vibration analysis of ship power transmission system	227-244
de Granrut, M. / Simon, A. / Dias, D.	Artificial neural networks for the interpretation of piezometric levels at the rock-concrete interface of arch dams	616-634
Stark, Alexander / Classen, Martin / Hegger, Josef	Bond behaviour of CFRP tendons in UHPFRC	148-161
Pulatsu, Bora / Erdogmus, Ece / Lourenço, Paulo B.	Comparison of in-plane and out-of-plane failure modes of masonry arch bridges using discontinuum analysis	24-361
Jafarian, Nader / Rezvani, Mohammad Javad	Crushing behavior of multi-component conical tubes as energy absorber: A comparative analysis between end-capped and non-capped conical tubes	128-135
Ye, Kan / Ji, Jinchen	Current, wave, wind and interaction induced dynamic response of a 5 MW spar-type offshore direct-drive wind turbine	395-409
Naito, Hideki / Bolander, John E.	Damage detection method for RC members using local vibration testing	361-374
Wang, Shengnan / Li, Jun / Luo, Hui / Zhu, Hongping	Damage identification in underground tunnel structures with wavelet based residual force vector	506-520
Mpidi Bita, Hercend / Tannert, Thomas	Disproportionate collapse prevention analysis for a mid-rise flat-plate cross-laminated timber building	460-471
Zerbin, Matteo / Aprile, Alessandra / Beyer, Katrin / Spacone, Enrico	Ductility reduction factor formulations for seismic design of RC wall and frame structures	102-115
Hafiz, Ali / Schumacher, Thomas	Effects of elastic supports and flexural cracking on low and high order modal properties of a reinforced concrete girder	573-585
Bovo, Marco / Savoia, Marco	Evaluation of force fluctuations induced by vertical seismic component on reinforced concrete precast structures	70-87
Sayyar Roudsari, Sajjad / Hamoush, Sameer A. / Soleimani, Sayed Mohamad / Madandoust, Rahmat	Evaluation of large-size reinforced concrete columns strengthened for axial load using fiber reinforced polymers	680-693
Massone, Leonardo M. / Muñoz, Gonzalo / Rojas, Fabian	Experimental and numerical cyclic response of RC walls with openings	318-330
Wang, Yuanqing / Wang, Zongyi / Xu, Kang / Shi, Yongjiu / Du, Xinxi	Experimental and numerical studies on the static and the dynamic behaviors of embedded cable support (ECS) glass facade system	521-533
Massone, Leonardo M. / Díaz, Sebastián / Manríquez, Ignacio / Rojas, Fabian / Herrera, Ricardo	Experimental cyclic response of RC walls with setback discontinuities	410-422
Wang, Chun-Lin / Liu, Ye / Zheng, Xiaolong / Wu, Jie	Experimental investigation of a precast concrete connection with all-steel bamboo-shaped energy dissipaters	298-308
Liu, Jingjing / Lam, Frank	Experimental test of coupling effect on CLT hold-down connections	586-602
Sun, Chao / Jahangiri, Vahid	Fatigue damage mitigation of offshore wind turbines under real wind and wave conditions	472-483
Janeliukstis, Rims / Clark, Andrew / Papaelias, Mayorkinos / Kaewunruen, Sakdirat	Flexural cracking-induced acoustic emission peak frequency shift in railway prestressed concrete sleepers	493-505
Walsh, Kenneth K. / Sallar, Grace / Steinberg, Eric P.	Hybrid base-isolation of a nonlinear building using a passive resettable stiffness damper	206-211
Calabrese, A. / Spizzuoco, M. / Strano, S. / Terzo, M.	Hysteresis models for response history analyses of recycled rubber–fiber reinforced bearings (RR-FRBs) base isolated buildings	635-644
Ghobadi, Mohammad Soheil / Ahmady Jazany, Roohollah / Farshchi, Hamidreza	In situ repair technique of infill masonry walls in steel frames damaged after an earthquake	665-679
Eren, N. / Brunesi, E. / Nascimbene, R.	Influence of masonry infills on the progressive collapse resistance of reinforced concrete framed buildings	375-394
Boroschek, Rubén L. / Bilbao, Joaquin A.	Interpretation of stabilization diagrams using density-based clustering algorithm	245-257
Carcaterra, Brian / Ngaile, Gracious	Investigation of energy storage in bolted joint components and the development of a geometry selection design tool for Belleville washers	436-443
He, Xiao-Huang-Can / Yuan, Xian-Xun / Yi, Wei-Jian	Irregularity index for quick identification of worst column removal scenarios of RC frame structures	191-205
Lu, Limin / Qiu, Junnan / Yuan, Yong / Tao, Jin / Yu, Haitao / Wang, Hui / Mang, Herbert	Large-scale test as the basis of investigating the fire-resistance of underground RC substructures	12-23
Xu, Fei / Wang, Jun / Chen, Ju / Wang, Yu-Hang	Load-transfer mechanism in angle-encased CFST members under axial tension	162-178
Denny, Jack W. / Clubley, Simon K.	Long-duration blast loading & response of steel column sections at different angles of incidence	331-342
Sun, Yao / Zhao, Ou	Material response and local stability of high-chromium stainless steel welded I-sections	212-226
Trabelsi, S. / Frikha, A. / Zghal, S. / Dammak, F.	A modified FSDT-based four nodes finite shell element for thermal buckling analysis of functionally graded plates and cylindrical shells	444-459
Di Lauro, Francesco / Montuori, Rosario / Nastri, Elide / Piluso, Vincenzo	Partial safety factors and overstrength coefficient evaluation for the design of connections equipped with friction dampers	645-655
Platt, Shawn / Harries, Kent A.	Proposed design methodology for titanium reinforcing bars in concrete	543-553
Ebrahimi, Samira / Mirghaderi, Seyed Rasoul / Zahrai, Seyed Mehdi	Proposed design procedure for gusset plate dimensions and force distribution at its interfaces to beam and column	554-572
Rankin, G. I. B. / Long, A. E.	Punching strength of conventional slab-column specimens	37-54
Perez-Ramirez, Carlos A. / Amezquita-Sanchez, Juan P. / Valtierra-Rodriguez, Martin / Adeli, Hojjat / Dominguez-Gonzalez, Aurelio / Romero-Troncoso, Rene J.	Recurrent neural network model with Bayesian training and mutual information for response prediction of large buildings	603-615
Mogili, Srinivas / Kuang, J. S.	Reversed cyclic performance of reinforced concrete knee joints under variable closing and opening stresses	116-127
Li, Beibei / Wang, Jingfeng / Lu, Yong / Zhang, Zengde / Wang, Jiaxin	Seismic response tests and analytical assessment of blind bolted assembly CFST frames with beam-connected SPSWs	343-360
Deng, Lu / Yan, Wangchen / Nie, Lei	A simple corrosion fatigue design method for bridges considering the coupled corrosion-overloading effect	309-317
Wang, Jingquan / Qi, Jianan / Tong, Teng / Xu, Qizhi / Xiu, Hongliang	Static behavior of large stud shear connectors in steel-UHPC composite structures	534-542
Zhang, Chenhui / Deng, Changgen	Static behaviors of buckling-monitoring members	55-69
Gil-Martín, L. M. / Hernández-Montes, E.	Strain compatibility in the strength design of RC slabs	423-435
Lukacs, Ildiko / Björnfot, Anders / Tomasi, Roberto	Strength and stiffness of cross-laminated timber (CLT) shear walls: State-of-the-art of analytical approaches	136-147
Kanchidurai, S. / Krishanan, P. A. / Baskar, K. / Saravana Raja Mohan, K.	Strength characteristic of novel mesh embedment technique for new brick construction with least expensive material	484-492
Rezaiee-Pajand, M. / Pourhekmat, D. / Arabi, E.	Thermo-mechanical stability analysis of functionally graded shells	1-11
Rout, Mrutyunjay / Hota, Sasank Shekhar / Karmakar, Amit	Thermoelastic free vibration response of graphene reinforced laminated composite shells	179-190
de Souza, Rafael Rodrigues / Miguel, Leandro Fleck Fadel / Kaminski, João / Lopez, Rafael Holdorf	Topology design recommendations of transmission line towers to minimize the bolt slippage effect	286-297
Zhang, Cong / Guo, Haibo / Jung, Kiho / Harris, Richard / Chang, Wen-Shao	Using self-tapping screw to reinforce dowel-type connection in a timber portal frame	656-664
Raffaele, Lorenzo / Bruno, Luca	Windblown sand action on civil structures: Definition and probabilistic modelling	88-101

Informations
sur cette fiche
IssueID
19913
Publié(e) le:
28.11.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - janvier 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - janvier 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.