Engineering Structures - novembre 2018

Publié:	novembre 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Pantò, B. / Caliò, I. / Lourenço, P. B.	A 3D discrete macro-element for modelling the out-of-plane behaviour of infilled frame structures	371-385
Bhandari, M. / Bharti, S. D. / Shrimali, M. K. / Datta, T. K.	Assessment of proposed lateral load patterns in pushover analysis for base-isolated frames	531-548
Barsotti, R. / Bennati, S.	Assessment of the in-plane shear capacity of masonry panels by elementary mechanical models	678-689
Guo, Xiaonong / Gao, Shuyu / Wang, Li / Bui, Tien Ngoc	Bearing capacity of embedded channel-shaped steel connections at precast concrete beam end	177-190
Chen, Cheng-Cheng / Lin, Keng-Ta / Chen, Yu-Jen	Behavior and shear strength of steel shape reinforced concrete deep beams	425-435
Masi, Filippo / Mariano, Paolo Maria / Vannucci, Paolo	Blast actions in aircrafts: An integrated methodology for designing protection devices	895-911
Hu, Ye / Chen, Li / Fang, Qin / Xiang, Hengbo	Blast loading model of the RC column under close-in explosion induced by the double-end-initiation explosive cylinder	304-321
Yu, Qian-Qian / Gao, Rui-Xin / Gu, Xiang-Lin / Zhao, Xiao-Ling / Chen, Tao	Bond behavior of CFRP-steel double-lap joints exposed to marine atmosphere and fatigue loading	76-85
Hsu, H.-L. / Halim, H.	Brace performance with steel curved dampers and amplified deformation mechanisms	628-644
Gong, Shunfeng / Wang, Xipeng / Zhang, Tao / Liu, Chengbin	Buckle propagation of sandwich pipes under external pressure	339-354
Kazem, Hamid / Zhang, Ye / Rizkalla, Sami / Seracino, Rudolf / Kobayashi, Akira	CFRP shear strengthening system for steel bridge girders	415-424
Wu, Yajie / Song, Xiaobin / Li, Kai	Compressive and racking performance of eccentrically aligned dou-gong connections	743-752
Boumakis, Ioannis / Marcon, Marco / Ninčević, Krešimir / Czernuschka, Lisa-Marie / Wan-Wendner, Roman	Concrete creep and shrinkage effect in adhesive anchors subjected to sustained loads	790-805
Yun, Xiang / Gardner, Leroy	The continuous strength method for the design of cold-formed steel non-slender tubular cross-sections	549-564
Kumar, Manish / Whittaker, Andrew S.	Cross-platform implementation, verification and validation of advanced mathematical models of elastomeric seismic isolation bearings	926-943
Ye, Huawen / Shuai, Chun / Zhang, Xun / Xu, Xun / Ummenhofer, Thomas	Determination of S-N fatigue curves for damaged steel plates strengthened with prestressed CFRP plates under tension loading	669-677
Wang, W. / Morgenthal, G.	Development and assessment of efficient models for barge impact processes based on nonlinear dynamic finite element analyses	617-627
Bui, Quoc-Bao / Limam, Ali / Bui, Tan-Trung	Dynamic discrete element modelling for seismic assessment of rammed earth walls	690-699
Hu, Ping / Zhang, Chunshun / Chen, Shu Jian / Wang, Yonghe / Wang, Wei / Duan, Wen Hui	Dynamic responses of bridge–embankment transitions in high speed railway: Field tests and data analyses	565-576
Mohee, Faizul M. / Al-Mayah, Adil	Effect of barrel, wedge material and thickness on composite plate anchor performance through analytical, finite element, experimental and 3D prototype investigations	138-154
Surana, Mitesh / Pisode, Mayur / Singh, Yogendra / Lang, Dominik H.	Effect of URM infills on inelastic floor response of RC frame buildings	861-878
Ghazaly, Nesma / Rashad, Ahmed / Kohail, Mohamed / Nawawy, Omar	Evaluation of bond strength between steel rebars and concrete for heat-damaged and repaired beam-end specimens	661-668
Homb, Anders / Kolstad, Svein Terje	Evaluation of floor vibration properties using measurements and calculations	168-176
Deng, Hongzhou. / Song, Xueqi / Chen, Zhenhua / Fu, Pengcheng / Dong, Jianyao	Experiment and design methodology of a double-layered flange connection in axial loads	436-456
Luccioni, B. / Isla, F. / Codina, R. / Ambrosini, D. / Zerbino, R. / Giaccio, G. / Torrijos, M. C.	Experimental and numerical analysis of blast response of High Strength Fiber Reinforced Concrete slabs	113-122
Imran, Mohamed / Mahendran, Mahen / Keerthan, Poologanathan	Experimental and numerical investigations of CFRP strengthened short SHS steel columns	879-894
Ryu, Jaeho / Kim, Yong Yeal / Park, Man Woo / Yoon, Sung-Won / Lee, Chang-Hwan / Ju, Young K.	Experimental and numerical investigations of steel-polymer hybrid floor panels subjected to three-point bending	467-482
dos Santos, G. B. / Gardner, L. / Kucukler, M.	Experimental and numerical study of stainless steel I-sections under concentrated internal one-flange and internal two-flange loading	355-370
Abdallah, Maha Hussein / Mohamed, Hamdy M. / Masmoudi, Radhouane / Moussa, Ahmed	Experimental evaluation and theoretical analysis of the effective flexural stiffness of reinforced CFFT columns	155-167
Sanches, Rafaela / Mercan, Oya / Roberts, Brent	Experimental investigations of vertical post-tensioned connection for modular steel structures	776-789
Yuan, Weiguang / Zhao, Jun / Sun, Yuping / Zeng, Lingxin	Experimental study on seismic behavior of concrete walls reinforced by PC strands	577-590
Yang, Yong / Xue, Yicong / Yu, Yunlong / Gao, Fengqi	Experimental study on seismic performance of partially precast steel reinforced concrete columns	63-75
Murali, G. / Ramprasad, K.	A feasibility of enhancing the impact strength of novel layered two stage fibrous concrete slabs	41-49
Sebastian, W. M. / Piazza, M. / Harvey, Tristan / Webster, Tom	Forward and Reverse shear transfer in beech LVL-concrete composites with singly inclined coach screw connectors	231-244
Lazar Sinković, Nuša / Dolšek, Matjaž / Žižmond, Jure	Impact of the type of the target response spectrum for ground motion selection and of the number of ground motions on the pushover-based seismic performance assessment of buildings	731-742
Vogrinec, Katja / Premrov, Miroslav	Influence of the design approach on the behaviour of timber-frame panel buildings under horizontal forces	1-12
Bu, Zhan-Yu / Zhang, Xu / Ye, Han-Hui / Xi, Kang / Wu, Wei-Ye	Interface shear transfer of precast concrete dry joints in segmental columns	257-272
Zhao, Peng / Xie, Lingzhi / Li, Liangpu / Liu, Quan / Yuan, Song	Large-scale rockfall impact experiments on a RC rock-shed with a newly proposed cushion layer composed of sand and EPE	386-398
Furtado, André / Rodrigues, Hugo / Varum, Humberto / Arêde, António	Mainshock-aftershock damage assessment of infilled RC structures	645-660
Liu, Xiao / Chung, Kwok-Fai / Ho, Ho-Cheung / Xiao, Meng / Hou, Zhao-xin / Nethercot, David A.	Mechanical behavior of high strength S690-QT steel welded sections with various heat input energy	245-256
Fu, Qiu Ni / Tan, Kang Hai / Zhou, Xu Hong / Yang, Bo	A mechanical model of composite floor systems under an internal column removal scenario	50-62
López-Almansa, F. / Kharazian, A.	New formulation for estimating the damping parameter of the Kelvin-Voigt model for seismic pounding simulation	284-295
Xia, Baizhan / Wang, Lifang	Non-probabilistic interval process analysis of time-varying uncertain structures	101-112
Ahmed, Mizan / Liang, Qing Quan / Patel, Vipulkumar Ishvarbhai / Hadi, Muhammad N. S.	Nonlinear analysis of rectangular concrete-filled double steel tubular short columns incorporating local buckling	13-26
Han, Qiang / Wen, Jianian / Du, Xiuli / Zhong, Zilan / Hao, Hong	Nonlinear seismic response of a base isolated single pylon cable-stayed bridge	806-821
Mpidi Bita, Hercend / Tannert, Thomas	Numerical optimisation of novel connection for cross-laminated timber buildings	273-283
Vaja, N. K. / Barry, O. R. / Tanbour, E. Y.	On the modeling and analysis of a vibration absorber for overhead powerlines with multiple resonant frequencies	711-720
Azhari, Fatemeh / Heidarpour, Amin / Zhao, Xiao-Ling	On the use of Bernstain-Bézier functions for modelling the post-fire stress-strain relationship of ultra-high strength steel (Grade 1200)	605-616
Pareek, S. / Suzuki, Y. / Araki, Y. / Youssef, M. A. / Meshaly, M.	Plastic hinge relocation in reinforced concrete beams using Cu-Al-Mn SMA bars	765-775
Li, Xuan / Zhang, Wei / Niu, Huawei / Wu, Zheng Yi	Probabilistic capacity assessment of single circuit transmission tower-line system subjected to strong winds	517-530
Hasik, Vaclav / Chhabra, Jaskanwal P. S. / Warn, Gordon P. / Bilec, Melissa M.	Review of approaches for integrating loss estimation and life cycle assessment to assess impacts of seismic building damage and repair	123-137
Yu, Yujie / Chen, Zhihua	Rigidity of corrugated plate sidewalls and its effect on the modular structural design	191-200
Vassallo, D. / Follesa, M. / Fragiacomo, M.	Seismic design of a six-storey CLT building in Italy	322-338
He, Minjuan / Luo, Qi / Li, Zheng / Dong, Hanlin / Li, Minghao	Seismic performance evaluation of timber-steel hybrid structure through large-scale shaking table tests	483-500
Mashhadiali, Niloufar / Kheyroddin, Ali	Seismic performance of concentrically braced frame with hexagonal pattern of braces to mitigate soft story behavior	27-40
Falamarz-Sheikhabadi, M. R. / Zerva, A.	Selection of earthquake records for the non-uniform excitation of bridges	296-303
Xue, Jianyang / Xu, Dan	Shake table tests on the traditional column-and-tie timber structures	847-860
Fallah Pour, Ali / Ozbakkaloglu, Togay / Vincent, Thomas	Simplified design-oriented axial stress-strain model for FRP-confined normal- and high-strength concrete	501-516
Ni, Shuna / Birely, Anna C.	A simplified model for the post-fire earthquake flexural response of reinforced concrete walls with boundary elements	721-730
Jin, Liu / Miao, Liyue / Han, Junyan / Du, Xiuli / Wei, Na / Li, Dong	Size effect tests on shear failure of interior RC beam-to-column joints under monotonic and cyclic loadings	591-604
Su, Cheng / Li, Baomu / Chen, Taicong / Dai, Xihua	Stochastic optimal design of nonlinear viscous dampers for large-scale structures subjected to non-stationary seismic excitations based on dimension-reduced explicit method	217-230
Zanuy, Carlos / Díaz, Iván M.	Stress distribution and resistance of lap splices under fatigue loading	700-710
Markulak, Damir / Dokšanović, Tihomir / Radić, Ivan / Miličević, Ivana	Structurally and environmentally favorable masonry units for infilled frames	753-764
Assaad, Joseph / Chakar, Elie / Zéhil, Gérard-Philippe	Testing and modeling the behavior of sandwich lightweight panels against wind and seismic loads	457-466
Sun, Yuan / Xu, Dong / Chen, Bin / Xu, Fang-Yuan / Zhu, Hong-Ping	Three-dimensional reinforcement design method and program realization for prestressed concrete box-girder bridges based on a specific spatial lattice grid model	822-846
Ruiz-García, Jorge / Yaghmaei-Sabegh, Saman / Bojórquez, Edén	Three-dimensional response of steel moment-resisting buildings under seismic sequences	399-414
Murin, Justin / Aminbaghai, Mehdi / Hrabovsky, Juraj / Balduzzi, Giuseppe / Dorn, Michael / Mang, Herbert A.	Torsional warping eigenmodes of FGM beams with longitudinally varying material properties	912-925
Kueres, Dominik / Hegger, Josef	Two-parameter kinematic theory for punching shear in reinforced concrete slabs without shear reinforcement	201-216
Zheng, Chaorong / Xie, Yu / Khan, Mahram / Wu, Yue / Liu, Jing	Wind-induced responses of tall buildings under combined aerodynamic control	86-100

Informations
sur cette fiche
IssueID
18063
Publié(e) le:
02.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - novembre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - novembre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.