Engineering Structures - mars 2016

Publié:	mars 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Liu, Tao / Zhang, Qilin	AP / VP specific equivalent viscous damping model for base-isolated buildings characterized by SDOF systems	36-47
Foyouzat, M. A. / Estekanchi, H. E.	Application of rigid-perfectly plastic spectra in improved seismic response assessment by Endurance Time method	24-35
Basha, Syed Humayun / Kaushik, Hemant B.	Behavior and failure mechanisms of masonry-infilled RC frames (in low-rise buildings) subject to lateral loading	233-245
Mirzabagheri, Sara / Tasnimi, Abbas Ali / Soltani Mohammadi, Masoud	Behavior of interior RC wide and conventional beam-column roof joints under cyclic load	333-344
Schoefs, F. / Bastidas-Arteaga, E. / Tran, T. V. / Villain, G. / Derobert, X.	Characterization of random fields from NDT measurements: A two stages procedure	312-322
McKinstray, Ross / Lim, James B. P. / Tanyimboh, Tiku T. / Phan, Duoc T. / Sha, Wei	Comparison of optimal designs of steel portal frames including topological asymmetry considering rolled, fabricated and tapered sections	505-524
Farahi, Mojtaba / Heidarpour, Amin / Zhao, Xiao-Ling / Al-Mahaidi, Riadh	Compressive behaviour of concrete-filled double-skin sections consisting of corrugated plates	467-477
Parisi, Fulvio / Sabella, Giuseppe / Augenti, Nicola	Constitutive model selection for unreinforced masonry cross sections based on best-fit analytical moment–curvature diagrams	451-466
Dancygier, Avraham N. / Berkover, Erez	Cracking localization and reduced ductility in fiber-reinforced concrete beams with low reinforcement ratios	411-424
Zhang, Ai-Lin / Zhang, Yan-xia / Li, Rui / Wang, Zong-yang	Cyclic behavior of a prefabricated self-centering beam–column connection with a bolted web friction device	185-198
Buitrago, Manuel / Adam, José M. / Alvarado, Yezid A. / Moragues, Juan J. / Gasch, Isabel / Calderón, Pedro A.	Designing construction processes in buildings by heuristic optimization	1-10
Blachowski, Bartlomiej / Gutkowski, Witold	Effect of damaged circular flange-bolted connections on behaviour of tall towers, modelled by multilevel substructuring	93-103
Tung, Nguyen Duc / Tue, Nguyen Viet	Effect of support condition and load arrangement on the shear response of reinforced concrete beams without transverse reinforcement	370-382
Chen, Quan / Wang, Chun-Lin / Meng, Shaoping / Zeng, Bin	Effect of the unbonding materials on the mechanic behavior of all-steel buckling-restrained braces	478-493
Mazza, Fabio / Alesina, Fabio	Effects of site condition in near-fault area on the nonlinear response of fire-damaged base-isolated structures	297-311
Furtado, André / Rodrigues, Hugo / Arêde, António / Varum, Humberto	Experimental evaluation of out-of-plane capacity of masonry infill walls	48-63
Shan, Sidi / Li, Shuang / Xu, Shiyu / Xie, Lili	Experimental study on the progressive collapse performance of RC frames with infill walls	80-92
Cicero, S. / Garcia, T. / Alvarez, J. A. / Bannister, A. / Klimpel, A. / Martín-Meizoso, A. / Aldazabal, J.	Fatigue behaviour of structural steels with oxy-fuel, plasma and laser cut straight edges. Definition of Eurocode 3 FAT classes	152-161
Miglietta, Paola Costanza / Grasselli, Giovanni / Bentz, Evan C.	Finite/discrete element model of tension stiffening in GFRP reinforced concrete	494-504
Yoo, Doo-Yeol / Banthia, Nemkumar / Yoon, Young-Soo	Flexural behavior of ultra-high-performance fiber-reinforced concrete beams reinforced with GFRP and steel rebars	246-262
Mousavi, Mohsen / Gandomi, Amir H.	A hybrid damage detection method using dynamic-reduction transformation matrix and modal force error	425-434
Ghahremannejad, Masoud / Park, Yeonho	Impact on the number of floors of a reinforced concrete building subjected to sudden column removal	11-23
Matos, José C. / Cruz, Paulo J. S. / Valente, Isabel B. / Neves, Luís C. / Moreira, Vicente N.	An innovative framework for probabilistic-based structural assessment with an application to existing reinforced concrete structures	552-564
McCann, F. / Fang, C. / Gardner, L. / Silvestre, N.	Local buckling and ultimate strength of slender elliptical hollow sections in compression	104-118
Jing, D. H. / Yu, T. / Liu, X. D.	New configuration of transverse reinforcement for improved seismic resistance of rectangular RC columns: Concept and axial compressive behavior	383-393
Chen, Li / Fang, Qin / Zhang, Li / Zhang, Yadong / Chen, Wensu	Numerical investigation of a water barrier against blast loadings	199-216
Sharma, Akanshu / Bošnjak, Josipa / Ožbolt, Jośko / Hofmann, Jan	Numerical modeling of reinforcement pull-out and cover splitting in fire-exposed beam-end specimens	217-232
Bian, Hanbing / Jia, Yun / Shao, Jianfu / Pontiroli, Christophe	Numerical study of a concrete target under the penetration of rigid projectile using an elastoplastic damage model	525-537
de Souza, Rafael Rodrigues / Miguel, Leandro Fleck Fadel / Lopez, Rafael Holdorf / Miguel, Letícia Fleck Fadel / Torii, André Jacomel	A procedure for the size, shape and topology optimization of transmission line tower structures	162-184
Chou, Chung-Che / Wu, Tsung-Han / Beato, Alexis Rafael Ovalle / Chung, Ping-Ting / Chen, Ying-Chuan	Seismic design and tests of a full-scale one-story one-bay steel frame with a dual-core self-centering brace	435-450
Banerjee, Abhik Kumar / Pramanik, Debdulal / Roy, Rana	Seismic structural fragilities: Proposals for improved methodology per spectral matching of accelerogram	538-551
Bessason, Bjarni / Bjarnason, Jón Örvar	Seismic vulnerability of low-rise residential buildings based on damage data from three earthquakes (M w 6.5, 6.5 and 6.3)	64-79
Amin, Ali / Foster, Stephen J.	Shear strength of steel fibre reinforced concrete beams with stirrups	323-332
Vogrinec, Katja / Premrov, Miroslav / Kozem Šilih, Erika	Simplified modelling of timber-framed walls under lateral loads	275-284
Fitzgerald, Breiffni / Basu, Biswajit	Structural control of wind turbines with soil structure interaction included	131-151
Ling, Jen Hua / Rahman, Ahmad Baharuddin Abd. / Ibrahim, Izni Syahrizal / Abdul Hamid, Zuhairi	Tensile capacity of grouted splice sleeves	285-296
Zhao, Ou / Gardner, Leroy / Young, Ben	Testing and numerical modelling of austenitic stainless steel CHS beam–columns	263-274
JahanMohammadi, Atefeh / Soltani, Masoud	Toward combined local-average stress field modeling of reinforced concrete	394-410
Cascardi, Alessio / Micelli, Francesco / Aiello, Maria Antonietta	Unified model for hollow columns externally confined by FRP	119-130
Wang, Zhi-Yu / Wang, Qing-Yuan	Yield and ultimate strengths determination of a blind bolted endplate connection to square hollow section column	345-369

Informations
sur cette fiche
IssueID
17503
Publié(e) le:
06.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - mars 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - mars 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.