Engineering Structures - septembre 2017

Publié:	septembre 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Wang, Dahai / Chen, Xinzhong / Xu, Kang	Analysis of buffeting response of hinged overhead transmission conductor to nonstationary winds	567-582
Dang, Canh N. / Hale, W. Micah / Martí-Vargas, J. R.	Assessment of transmission length of prestressing strands according to fib Model Code 2010	425-433
Khan, M. / Uy, B. / Tao, Z. / Mashiri, F.	Behaviour and design of short high-strength steel welded box and concrete-filled tube (CFT) sections	458-472
Abdulridha, Alaa / Palermo, Dan	Behaviour and modelling of hybrid SMA-steel reinforced concrete slender shear wall	77-89
Patel, Vipulkumar Ishvarbhai / Hassanein, M. F. / Thai, Huu-Tai / Abadi, Haider Al / Paton-Cole, Vidal	Behaviour of axially loaded circular concrete-filled bimetallic stainless-carbon steel tubular short columns	583-597
Wang, Weiqiang / Sheikh, M. Neaz / Hadi, Muhammad N. S. / Gao, Danying / Chen, Gang	Behaviour of concrete-encased concrete-filled FRP tube (CCFT) columns under axial compression	256-268
Tekle, Biruk Hailu / Khennane, Amar / Kayali, Obada	Bond of spliced GFRP reinforcement bars in alkali activated cement concrete	740-751
Caro, Manjola / Jemaa, Yaser / Dirar, Samir / Quinn, Andrew	Bond performance of deep embedment FRP bars epoxy-bonded into concrete	448-457
Al-Sibahy, Adnan / Edwards, Rodger	Characterization of the clay masonry units and construction technique at the ancient city of Nippur	517-529
Afshar, R. / van Dijk, N. P. / Bjurhager, I. / Gamstedt, E. K.	Comparison of experimental testing and finite element modelling of a replica of a section of the Vasa warship to identify the behaviour of structural joints	62-76
Kim, Sang-Hyo / Kim, Kun-Soo / Park, Sejun / Jung, Chi-Young / Choi, Jae-Gu	Comparison of hysteretic performance of stubby Y-type perfobond rib and stud shear connectors	114-124
Ni, Pengpeng / Mangalathu, Sujith / Mei, Guoxiong / Zhao, Yanlin	Compressive and flexural behaviour of reinforced concrete permeable piles	316-327
Wattick, John Andrew / Chen, An	Development of a prototype fiber Reinforced Polymer – Concrete Filled wall panel	297-308
Ozbakkaloglu, Togay / Saatcioglu, Murat	Displacement-based model to predict lateral drift capacities of concrete-filled FRP tube columns	345-355
Lou, Tiejiong / Lopes, Sergio M. R. / Lopes, Adelino V.	Effect of linear transformation on nonlinear behavior of continuous prestressed beams with external FRP cables	410-424
Yuan, Fang / Wu, Yu-Fei	Effect of load cycling on plastic hinge length in RC columns	90-102
Areiza-Hurtado, Mauricio / Aristizabal-Ochoa, J. Dario	Elastic analysis of composite beams and beams retrofitted with FRP laminates with generalized end conditions	309-315
de Souza, Patricia T. / Kataoka, Marcela N. / El Debs, Ana Lúcia H. C.	Experimental and numerical analysis of the push-out test on shear studs in hollow core slabs	398-409
Bolis, Valentino / Preti, Marco / Marini, Alessandra / Giuriani, Ezio	Experimental cyclic and dynamic in-plane rocking response of a masonry transverse arch typical of historical churches	285-296
Nilforoush, Rasoul / Nilsson, Martin / Elfgren, Lennart	Experimental evaluation of tensile behaviour of single cast-in-place anchor bolts in plain and steel fibre-reinforced normal- and high-strength concrete	195-206
Gattesco, Natalino / Gubana, Alessandra / Buttazzi, Manuela / Melotto, Massimo	Experimental investigation on the behavior of glued-in rod joints in timber beams subjected to monotonic and cyclic loading	372-384
Chen, Zhihua / Liu, Jiadi / Yu, Yujie	Experimental study on interior connections in modular steel buildings	625-638
Tzimas, A. S. / Karavasilis, T. L. / Bazeos, N. / Beskos, D. E.	Extension of the hybrid force/displacement (HFD) seismic design method to 3D steel moment-resisting frame buildings	486-504
Behnam, Hamdolah / Kuang, J. S. / Huang, Roy Y. C.	Exterior RC wide beam-column connections: Effect of beam width ratio on seismic behaviour	27-44
Yoo, Doo-Yeol / Yuan, Tianfeng / Yang, Jun-Mo / Yoon, Young-Soo	Feasibility of replacing minimum shear reinforcement with steel fibers for sustainable high-strength concrete beams	207-222
Alkhalil, Jwan / El-Maaddawy, Tamer	Finite element modelling and testing of two-span concrete slab strips strengthened by externally-bonded composites and mechanical anchors	45-61
Paraskevoulakos, C. / Tanner, D. W. J. / Scott, T. B.	Finite element modelling approach to investigate the degradation of intermediate level waste drums induced from interior metallic corrosion	385-397
Rasheed, Hayder A. / Abdalla, Jamal / Hawileh, Rami / Al-Tamimi, Adil K.	Flexural behavior of reinforced concrete beams strengthened with externally bonded Aluminum Alloy plates	473-485
Huang, Xiaogang / Zhou, Zhen / Xie, Qin / Xue, Rongle / Zhu, Dongping	Force distribution analysis of self-centering coupled-beams for moment-resisting-frames without floor elongation	328-344
Tahershamsi, M. / Fernandez, I. / Zandi, K. / Lundgren, K.	Four levels to assess anchorage capacity of corroded reinforcement in concrete	434-447
Dal Lago, Bruno / Biondini, Fabio / Toniolo, Giandomenico	Friction-based dissipative devices for precast concrete panels	356-371
Feng, Liuyang / Qian, Xudong	A hot-spot energy indicator for welded plate connections under cyclic axial loading and bending	598-612
Seifi, Ali / Hosseini, Abdollah / Marefat, Mohammad Sadegh / Zareian, Mohammad Sajjad	Improving seismic performance of old-type RC frames using NSM technique and FRP jackets	705-723
Wilches Están, José de Jesús / Santa María, Hernán / Riddell, Rafael / Arrate, Carlos	Influence of the use of external shear keys on the seismic behavior of Chilean highway bridges	613-624
Xu, Yan / Brownjohn, James Mark William / Hester, David / Koo, Ki Young	Long-span bridges: Enhanced data fusion of GPS displacement and deck accelerations	639-651
Fenerci, Aksel / Øiseth, Ole / Rønnquist, Anders	Long-term monitoring of wind field characteristics and dynamic response of a long-span suspension bridge in complex terrain	269-284
Saykin, Vitaliy V. / Nguyen, Tam H. / Hajjar, Jerome F. / Deniz, Derya / Song, Junho	Material characterization using finite element deletion strategies for collapse modeling of steel structures	125-133
Bonessio, Noemi / Benzoni, Gianmario / Lomiento, Giuseppe	A multi-mode approach for multi-directional damage detection in frame structures	505-516
Lee, Tzu-Ying / Chung, Kun-Jun / Chang, Hao	A new implicit dynamic finite element analysis procedure with damping included	530-544
Guo, Yan-Lin / Zhu, Jing-Shen / Zhou, Peng / Zhu, Bo-Li	A new shuttle-shaped buckling-restrained brace. Theoretical study on buckling behavior and load resistance	223-241
Lemes, Ígor J. M. / Silveira, Ricardo A. M. / Silva, Andréa R. D. / Rocha, Paulo A. S.	Nonlinear analysis of two-dimensional steel, reinforced concrete and composite steel-concrete structures via coupling SCM/RPHM	12-26
Feng, Peng / Qiang, Hanlin / Qin, Weihong / Gao, Meng	A novel kinked rebar configuration for simultaneously improving the seismic performance and progressive collapse resistance of RC frame structures	752-767
Amezquita-Sanchez, Juan P. / Seon Park, Hyo / Adeli, Hojjat	A novel methodology for modal parameters identification of large smart structures using MUSIC, empirical wavelet transform, and Hilbert transform	148-159
Xu, Leige / Lin, Mian	On the critical axial forces of upheaval buckling for imperfect submarine pipelines	692-704
Alam, Md Iftekharul / Fawzia, Sabrina / Zhao, Xiao-Ling / Remennikov, Alex M. / Bambach, M. R. / Elchalakani, M.	Performance and dynamic behaviour of FRP strengthened CFST members subjected to lateral impact	160-176
Ibrahim, Omar A. / Lignos, Dimitrios G. / Rogers, Colin A.	A probabilistic approach for assessing discontinuities in structural steel components based on Charpy-V-notch tests	1-11
Ding, Yang / Song, Xiaoran / Zhu, Hai-Tao	Probabilistic progressive collapse analysis of steel frame structures against blast loads	679-691
Sagaseta, J. / Olmati, P. / Micallef, K. / Cormie, D.	Punching shear failure in blast-loaded RC slabs and panels	177-194
Hu, Biao / Wu, Yu-Fei	Quantification of shear cracking in reinforced concrete beams	666-678
Sauder, Heather Scot / Sarkar, Partha P.	Real-time prediction of aeroelastic loads of wind turbine blades in gusty and turbulent wind using an improved load model	103-113
Zhu, Haiqing / Li, Ying / Zhang, Xiedong	Rigidity estimation of embedded CFST column-to-beam connections	768-781
Aminbaghai, Mehdi / Murin, Justin / Balduzzi, Giuseppe / Hrabovsky, Juraj / Hochreiner, Georg / Mang, Herbert A.	Second-order torsional warping theory considering the secondary torsion-moment deformation-effect	724-739
Nuzzo, Iolanda / Caterino, Nicola / Maddaloni, Giuseppe / Occhiuzzi, Antonio	Smart hybrid isolation of a case study highway bridge exploiting seismic early warning information	134-147
Bruno, Luca / Corbetta, Alessandro	Uncertainties in crowd dynamic loading of footbridges: A novel multi-scale model of pedestrian traffic	545-566
Dai, Kaoshan / Wang, Jianze / Li, Bowei / Hong, H. P.	Use of residual drift for post-earthquake damage assessment of RC buildings	242-255
Zhang, Sigong / Xu, Lei / Qin, Jingwei	Vibration of lightweight steel floor systems with occupants: Modelling, formulation and dynamic properties	652-665

Informations
sur cette fiche
IssueID
17384
Publié(e) le:
06.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - septembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - septembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.