Engineering Structures - juillet 2012

Publié:	juillet 2012

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Lozano-Galant, J. A. / Payá-Zaforteza, I. / Xu, D. / Turmo, J.	Analysis of the construction process of cable-stayed bridges built on temporary supports	95-106
Leite, L. / Bonet, J. L. / Pallarés, L. / Miguel, Pedro F. / Fernandez-Prada, Miguel A.	Behavior of RC slender columns under unequal eccentricities and skew angle loads at the ends	254-266
Schladitz, Frank / Frenzel, Michael / Ehlig, Daniel / Curbach, Manfred	Bending load capacity of reinforced concrete slabs strengthened with textile reinforced concrete	317-326
Cardone, Donatello / Perrone, Giuseppe	Critical load of slender elastomeric seismic isolators: An experimental perspective	198-204
Miller, David J. / Fahnestock, Larry A. / Eatherton, Matthew R.	Development and experimental validation of a nickel–titanium shape memory alloy self-centering buckling-restrained brace	288-298
Corman, Sylvain / Chase, J. Geoffrey / MacRae, Gregory A. / Rodgers, Geoffrey W.	Development and spectral analysis of an advanced diamond shaped resetable device control law	1-8
Barrera, A. C. / Bonet, J. L. / Romero, M. L. / Fernandez, M. A.	Ductility of slender reinforced concrete columns under monotonic flexure and constant axial load	398-412
Zhao, Junxian / Wu, Bin / Ou, Jinping	Effect of brace end rotation on the global buckling behavior of pin-connected buckling-restrained braces with end collars	240-253
Abbasnia, R. / Hosseinpour, F. / Rostamian, M. / Ziaadiny, H.	Effect of corner radius on stress–strain behavior of FRP confined prisms under axial cyclic compression	529-535
Gilbert, R. I. / Bradford, M. A. / Gholamhoseini, A. / Chang, Z.-T.	Effects of shrinkage on the long-term stresses and deformations of composite concrete slabs	9-19
Piccardo, Giuseppe / Tubino, Federica	Equivalent spectral model and maximum dynamic response for the serviceability analysis of footbridges	445-456
Benavent-Climent, Amadeo / Zamora-Sánchez, Diego / Gil-Villaverde, José Francisco	Experimental study on the effective width of flat slab structures under dynamic seismic loading	361-370
Wang, Zhenyu / Wang, Daiyu / Smith, Scott T. / Lu, Dagang	Experimental testing and analytical modeling of CFRP-confined large circular RC columns subjected to cyclic axial compression	64-74
Prinz, Gary S. / Nussbaumer, Alain	Fatigue analysis of liquid-storage tank shell-to-base connections under multi-axial loading	75-82
Ribeiro, Daniel / Calçada, R. / Delgado, R. / Brehm, M. / Zabel, V.	Finite element model updating of a bowstring-arch railway bridge based on experimental modal parameters	413-435
Garzón-Roca, Julio / Adam, José M. / Calderón, Pedro A. / Valente, Isabel B.	Finite element modelling of steel-caged RC columns subjected to axial force and bending moment	168-186
Goel, S. / Singh, S. P. / Singh, P.	Flexural fatigue strength and failure probability of Self Compacting Fibre Reinforced Concrete beams	131-140
Lozano-Galant, J. A. / Payá-Zaforteza, I. / Xu, D. / Turmo, J.	Forward Algorithm for the construction control of cable-stayed bridges built on temporary supports	119-130
Tavares, Danusa H. / Padgett, Jamie E. / Paultre, Patrick	Fragility curves of typical as-built highway bridges in eastern Canada	107-118
Djelosevic, Mirko / Gajic, Vladeta / Petrovic, Dragan / Bizic, Milan	Identification of local stress parameters influencing the optimum design of box girders	299-316
Tirca, Lucia / Chen, Liang	The influence of lateral load patterns on the seismic design of zipper braced frames	536-555
Campione, Giuseppe	Load carrying capacity of RC compressed columns strengthened with steel angles and strips	457-465
Thrall, A. P. / Billington, D. P. / Bréa, K. L.	The Maria Pia Bridge: A major work of structural art	479-486
Zenunovic, Damir / Folić, Radomir	Models for behaviour analysis of monolithic wall and precast or monolithic floor slab connections	466-478
Caliò, Ivo / Marletta, Massimo / Pantò, Bartolomeo	A new discrete element model for the evaluation of the seismic behaviour of unreinforced masonry buildings	327-338
Kim, Kang Su / Lee, Deuck Hang	Nonlinear analysis method for continuous post-tensioned concrete members with unbonded tendons	487-500
Okumus, Pinar / Oliva, Michael G. / Becker, Scot	Nonlinear finite element modeling of cracking at ends of pretensioned bridge girders	267-275
Guezouli, Samy / Lachal, Alain	Numerical analysis of frictional contact effects in push-out tests	39-50
Karalar, Memduh / Padgett, Jamie E. / Dicleli, Murat	Parametric analysis of optimum isolator properties for bridges susceptible to near-fault ground motions	276-287
Davalos, Julio F. / Chen, An / Zou, Bin	Performance of a scaled FRP deck-on-steel girder bridge model with partial degree of composite action	51-63
Faria, Duarte M. V. / Lúcio, Válter J. G. / Ramos, A. Pinho	Post-punching behaviour of flat slabs strengthened with a new technique using post-tensioning	383-397
Love, J. S. / Tait, M. J.	A preliminary design method for tuned liquid dampers conforming to space restrictions	187-197
Maya, L. F. / Fernández Ruiz, M. / Muttoni, A. / Foster, S. J.	Punching shear strength of steel fibre reinforced concrete slabs	83-94
Torres, Ll. / Miàs, C. / Turon, A. / Baena, M.	A rational method to predict long-term deflections of FRP reinforced concrete members	230-239
Moliner, E. / Museros, P. / Martínez-Rodrigo, M. D.	Retrofit of existing railway bridges of short to medium spans for high-speed traffic using viscoelastic dampers	519-528
Maheri, Alireza / Maheri, Mahmoud R.	A robust method for integrated design of trusses supporting distributed loads	339-349
Rocha, J. M. / Henriques, A. A. / Calçada, R.	Safety assessment of a short span railway bridge for high-speed traffic using simulation techniques	141-154
Lourenço, Paulo B. / Trujillo, Alejandro / Mendes, Nuno / Ramos, Luís F.	Seismic performance of the St. George of the Latins church: Lessons learned from studying masonry ruins	501-518
DeJong, Matthew J.	Seismic response of stone masonry spires: Analytical modeling	556-565
DeJong, Matthew J. / Vibert, Christopher	Seismic response of stone masonry spires: Computational and experimental modeling	566-574
Wang, Guo-Lin / Dai, Jian-Guo / Teng, J. G.	Shear strength model for RC beam–column joints under seismic loading	350-360
Carini, Angelo / Genna, Francesco	Stability and strength of old masonry vaults under compressive longitudinal loads: Engineering analyses of a case study	218-229
Kokot, Seweryn / Anthoine, Armelle / Negro, Paolo / Solomos, George	Static and dynamic analysis of a reinforced concrete flat slab frame building for progressive collapse	205-217
Branco, Jorge M. / Araújo, João P.	Structural behaviour of log timber walls under lateral in-plane loads	371-382
Kulprapha, Nonthachart / Warnitchai, Pennung	Structural health monitoring of continuous prestressed concrete bridges using ambient thermal responses	20-38
Carboni, Biagio / Lacarbonara, Walter	A three-dimensional continuum approach to the thermoelastodynamics of large-scale structures	155-167
Gil-Martín, Luisa María / Hernández-Montes, Enrique	Unified buckling length coefficient for sway and non-sway structures	436-444

Informations
sur cette fiche
IssueID
17351
Publié(e) le:
01.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - juillet 2012

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - juillet 2012

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.