DYNA - v. 97, n. 3 (mai 2022)

Publié:	mai 2022

Auteur(s)	Titre	Page(s)
Daniel Shadrach, Finney / Kandasamy, Gunavathi / Raghunathan, Anitha	Classification of Leaf Diseases Using Modified Genetic Algorithm and Normalized Sum Square Deviation	263-266
Cisneros Villalobos, Luis / Vera Dimas, José Gerardo / Martinez Oropeza, Alina / Tecpoyotl Torres, Margarita / Lopez Sesenes, Roy	Consideraciones operativas que determinan la interconexión exitosa de circuitos de distribución urbanos en media tensión para mantener la continuidad del suministro eléctrico: Operational considerations that determine the successful interconnection of urban medium-voltage distribution circuits to maintain the continuity of electrical supply	231-232
Sowrirajan, CHANDRASEKARAN / Sundarraj, DURAIRAJ / Padmavathi, S.	Enhancing the Performance of a Photovoltaic-fed Multilevel Inverter Using a Pi Hysteresis Controller	321-328
Garcia Collado, Alberto Jose / Dorado Vicente, Ruben / Carazo Álvarez, Daniel / Gonzalez Lozano, Ismael	Evaluación de las propiedades mecánicas y microestructura de probetas de la aleación AISI 316l impresas por deposición de filamento fundido: Evaluation of the mechanical properties and microstructure of AISI 316l alloy specimens printed by fused filament fabrication	254-257
Arias Ruiz, Luis Miguel / Gaviria de La Puerta, Jose / Artola Beobide, Garikoitz / Porto Gomez, Igone	Evolution of Hot Stamping Technology: a Bibliometric Review	308-314
De La Rosa Mendoza, San Jose / Alvarez Salas, Ricardo / González García, Mario / Cardenas Galindo, Victor Manuel / Villalobos Piña, Francisco J. / Miranda Vidales, Homero	Fault Detection Based on the Discrete Wavelet Transform For the Converter of a Wind Power Generator System Operating Under Disturbances In the Grid	249-253
Serrano Gonzalez, Javier / Riquelme Santos, Jesus / Arcos Vargas, Angel	HVDC Power Transmission. the Technological Resurgence of Direct Current	226-228
Gomez Marquez, Diego Armando / Ledesma Orozco, Elias Rigoberto / Hino, Ryutaro / Aguilera Gomez, Eduardo / Hamasaki, Hiroshi	IDENTIFICATION OF PARAMETERS FOR CHARACTERIZATION AT HIGH-TEMPERATURE OF 38MnVS6 STEEL USED IN HOT FORGING PROCESSES	288-294
Polo Navarro, Lorena / Sarasa Rubio, Marta / Cipres Bagüeste, David / Escuin Finol, David	Impacto de variables macroeconómicas en la previsión de la demanda para el sector de la construcción: caso de estudio: Impact Of Macroeconomic Variables On Demand Forecasting For The Construction Sector: Case Study	[ 1 p.]-[ 1 p.]
Gomez Alonso, Jose Luis / Allue Salvador, Alexandra / De Marco Rodriguez, Isabel / Retolaza Gaviña, Jone / Diez Barcenilla, Gorka	Influence of Slicer Software Used with 3d Printing Filament Extrusion Technology on Properties of Printed Parts with Short Fiber Reinforced Thermoplastic Composite	295-300
Torrell Martinez, Francesca / Cuatrecasas Arbos, Lluis / Olivella Nadal, Jorge	Key Factor: Particularization Model for TPM Deployment	[ 2 pp.]-[ 2 pp.]
Sanz Peña, Carmen / Tena Mesa, Mikel / Leunda Arrizabalaga, Josu / Gaztañaga Gallastegi, Idurre / Labrador Varea, Ricardo	Laser cladding sobre fundiciones de alto y bajo contenido en carbono para discos de freno (laser cladding on high and low content of carbon cast iron for brake discs)	315-320
Fernandez de la Puente Sarriá, Arturo / Del Rio Cidoncha, Maria Gloria / De Paula Montes, Francisco / Bravo Aranda, Gabriel	A Metodología de automatización del diseño gráfico para pymes. Herramientas para el diseño gráfico automático: Methodology for graphic design automation for smes. Tools for automatic graphic design	223-225
Gonzalez Jorge, Higinio / Fariñas Alvarez, Noelia / Navarro Medina, Fermin	Metrological Evaluation of Helmholtz Facility Setup For Testing of Magnetic Attitude Determination and Control Systems (ADCS) of Small Satellites	267-273
Abril Jimenez, Patricia / Cabrera Umpierre, Maria Fernanda / Montalva Colomer, Juan Bautista / Arredondo, Maria Teresa	Middle-Aged Quarry Workers' Perspectives on Successful Ageing At Work. a Qualitative Study	239-243
Rajaram, Dhivya / Sivakumar, Kogilavani	Moving Objects Detection, Classification and Tracking of Video Streaming By Improved Feature Extraction Approach Using K-svm	274-280
Ipiñazar Epalza, Asier / Zarrabeitia Bilbao, Enara / Rio Belver, Rosa Maria / Cilleruelo Carrasco, Ernesto	Organizational Culture Transformation Model In a Manufacturing Plant: Impact Analysis of a Four Year Journey Towards High Performing Organization	244-248
Molina Salazar, Javier / Lozano Lozano, Secundino / Rodríguez Medina, Manuel / Poblano Ojinaga, Eduardo Rafael	Proceso De Impresión En Impresora 3d Con Doble Extrusor Usando Modelado Por Deposicion Fundida (fdm) (dual Extruder 3d Printer Printing Process Using Fused Deposition Modeling (fdm))	230
Rosado García, María Jesús	Smart Territory, Infrastructure Maintenance and Sustainability: the Necessary Evolution of 'smart' After Covid-19	258-262
Navarro Torres, Antonio Matias / Mena Nieto, Angel / Bravo Aranda, Gabriel	Use of Semantic Technologies In the Development of An Ontology For the Management of Urban Projects. the Case of the Seville City Council	234-238

Auteur(s)

Titre

Page(s)

Daniel Shadrach, Finney / Kandasamy, Gunavathi / Raghunathan, Anitha

Classification of Leaf Diseases Using Modified Genetic Algorithm and Normalized Sum Square Deviation

263-266

Cisneros Villalobos, Luis / Vera Dimas, José Gerardo / Martinez Oropeza, Alina / Tecpoyotl Torres, Margarita / Lopez Sesenes, Roy

Consideraciones operativas que determinan la interconexión exitosa de circuitos de distribución urbanos en media tensión para mantener la continuidad del suministro eléctrico: Operational considerations that determine the successful interconnection of urban medium-voltage distribution circuits to maintain the continuity of electrical supply

231-232

Sowrirajan, CHANDRASEKARAN / Sundarraj, DURAIRAJ / Padmavathi, S.

Enhancing the Performance of a Photovoltaic-fed Multilevel Inverter Using a Pi Hysteresis Controller

321-328

Garcia Collado, Alberto Jose / Dorado Vicente, Ruben / Carazo Álvarez, Daniel / Gonzalez Lozano, Ismael

Evaluación de las propiedades mecánicas y microestructura de probetas de la aleación AISI 316l impresas por deposición de filamento fundido: Evaluation of the mechanical properties and microstructure of AISI 316l alloy specimens printed by fused filament fabrication

254-257

Arias Ruiz, Luis Miguel / Gaviria de La Puerta, Jose / Artola Beobide, Garikoitz / Porto Gomez, Igone

Evolution of Hot Stamping Technology: a Bibliometric Review

308-314

De La Rosa Mendoza, San Jose / Alvarez Salas, Ricardo / González García, Mario / Cardenas Galindo, Victor Manuel / Villalobos Piña, Francisco J. / Miranda Vidales, Homero

Fault Detection Based on the Discrete Wavelet Transform For the Converter of a Wind Power Generator System Operating Under Disturbances In the Grid

249-253

Serrano Gonzalez, Javier / Riquelme Santos, Jesus / Arcos Vargas, Angel

HVDC Power Transmission. the Technological Resurgence of Direct Current

226-228

Gomez Marquez, Diego Armando / Ledesma Orozco, Elias Rigoberto / Hino, Ryutaro / Aguilera Gomez, Eduardo / Hamasaki, Hiroshi

IDENTIFICATION OF PARAMETERS FOR CHARACTERIZATION AT HIGH-TEMPERATURE OF 38MnVS6 STEEL USED IN HOT FORGING PROCESSES

288-294

Polo Navarro, Lorena / Sarasa Rubio, Marta / Cipres Bagüeste, David / Escuin Finol, David

Impacto de variables macroeconómicas en la previsión de la demanda para el sector de la construcción: caso de estudio: Impact Of Macroeconomic Variables On Demand Forecasting For The Construction Sector: Case Study

[ 1 p.]-[ 1 p.]

Gomez Alonso, Jose Luis / Allue Salvador, Alexandra / De Marco Rodriguez, Isabel / Retolaza Gaviña, Jone / Diez Barcenilla, Gorka

Influence of Slicer Software Used with 3d Printing Filament Extrusion Technology on Properties of Printed Parts with Short Fiber Reinforced Thermoplastic Composite

295-300

Torrell Martinez, Francesca / Cuatrecasas Arbos, Lluis / Olivella Nadal, Jorge

Key Factor: Particularization Model for TPM Deployment

[ 2 pp.]-[ 2 pp.]

Sanz Peña, Carmen / Tena Mesa, Mikel / Leunda Arrizabalaga, Josu / Gaztañaga Gallastegi, Idurre / Labrador Varea, Ricardo

Laser cladding sobre fundiciones de alto y bajo contenido en carbono para discos de freno (laser cladding on high and low content of carbon cast iron for brake discs)

315-320

Fernandez de la Puente Sarriá, Arturo / Del Rio Cidoncha, Maria Gloria / De Paula Montes, Francisco / Bravo Aranda, Gabriel

A Metodología de automatización del diseño gráfico para pymes. Herramientas para el diseño gráfico automático: Methodology for graphic design automation for smes. Tools for automatic graphic design

223-225

Gonzalez Jorge, Higinio / Fariñas Alvarez, Noelia / Navarro Medina, Fermin

Metrological Evaluation of Helmholtz Facility Setup For Testing of Magnetic Attitude Determination and Control Systems (ADCS) of Small Satellites

267-273

Abril Jimenez, Patricia / Cabrera Umpierre, Maria Fernanda / Montalva Colomer, Juan Bautista / Arredondo, Maria Teresa

Middle-Aged Quarry Workers' Perspectives on Successful Ageing At Work. a Qualitative Study

239-243

Rajaram, Dhivya / Sivakumar, Kogilavani

Moving Objects Detection, Classification and Tracking of Video Streaming By Improved Feature Extraction Approach Using K-svm

274-280

Ipiñazar Epalza, Asier / Zarrabeitia Bilbao, Enara / Rio Belver, Rosa Maria / Cilleruelo Carrasco, Ernesto

Organizational Culture Transformation Model In a Manufacturing Plant: Impact Analysis of a Four Year Journey Towards High Performing Organization

244-248

Molina Salazar, Javier / Lozano Lozano, Secundino / Rodríguez Medina, Manuel / Poblano Ojinaga, Eduardo Rafael

Proceso De Impresión En Impresora 3d Con Doble Extrusor Usando Modelado Por Deposicion Fundida (fdm) (dual Extruder 3d Printer Printing Process Using Fused Deposition Modeling (fdm))

230

Rosado García, María Jesús

Smart Territory, Infrastructure Maintenance and Sustainability: the Necessary Evolution of 'smart' After Covid-19

258-262

Navarro Torres, Antonio Matias / Mena Nieto, Angel / Bravo Aranda, Gabriel

Use of Semantic Technologies In the Development of An Ontology For the Management of Urban Projects. the Case of the Seville City Council

234-238

Publicité

DYNA - v. 97, n. 3 (mai 2022)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

DYNA - v. 97, n. 3 (mai 2022)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.