Construction and Building Materials - décembre 2023

Publié:	décembre 2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Gómez-Casero, M. A. / Calado, Luís / Romano, Pedro / Eliche-Quesada, D.	Acorn gasification char valorisation in the manufacture of alkali activated materials	133533
Shanmugasundaram, N. / Praveenkumar, S.	Adhesive characteristics of novel greener engineered cementitious composite with conventional concrete substrate	133591
Zhang, Wenbing / Shi, Danda / Shen, Zhenzhong / Zhang, Jiao / Shao, Wei / Li, Hanhan / Zhao, Shan / Li, Qingming / Cao, Rong	An approach for quantifying the calcium leaching effect on service performance of concrete cutoff wall of embankment dams	133489
Hasan, Noor Md. Sadiqul / Shaurdho, Nur Mohammad Nazmus / Basit, Md. Abdul / Chandra Paul, Suvash / Sobuz, Md. Habibur Rahman / Miah, Md Jihad	Assessment of the rheological and mechanical properties of palmyra fruit mesocarp fibre reinforced eco-friendly concrete	133530
Li, Lingyu / Ma, Haiyan / Yu, Hongfa / Zhang, Jinhua / Cheng, Ming / Wu, Zhangyu / Yan, Jun / Zhang, Lifang / Fan, Haotian / Wang, Fang	Attack resistance mechanism, uniaxial compressive mechanical properties and meso-simulation of high-performance concrete exposed to brine in salt lake for 10 years	133520
Jiang, Wei / Zhang, Xue Gang / Zhang, Yi / Han, Dong / Xie, Yi Min / Ren, Xin	Auxetic frame with programmable strength and stiffness: Design, investigation and perspective	133478
Tripura, Deb Dulal / Kasinikota, Pardhasaradhi	Axial load behavior of unreinforced and reinforced hollow interlocking compressed stabilized earth block masonry walls	133451
Chen, Peiyuan / Wang, Cheng / Fang, Yi / Li, Jin / Xu, Ying / Gu, Zhicheng / Wang, Jialai	Bio-inspired functionalization of crumb rubber using polydopamine to enhance the performance of rubberized mortars	133550
Hou, Lijun / Sun, Hui / Liu, Gengsheng / Huang, Ting / Chen, Da	Bond strength of deformed reinforcement embedded in steel fiber reinforced concrete: Influencing factors and prediction model	133436
Chen, Xiao / Yang, Yin / Zhang, Haoyu / Du, Xinyu / Chen, Lishun / Zhao, Qinglin / Li, Beixing	Brick-concrete recycled aggregate/powder synergistic preparation of pervious concrete	133517
Di, Hongfeng / Guan, Xuemao / Liu, Songhui	Changes in mechanical performance and pore structure of hardened cement paste under the combined effect of calcium leaching and dry/wet cycles	133519
Dang, Juntao / Song, Caihong / Qiao, Min / Li, Guo / Dong, Shulin / Fan, Fujun / Lv, Yajun	Characteristics analysis of long afterglow phosphor with SiO2 coating and evaluation its influence on the properties of self-luminescent cement-based materials	133402
Bhat, Zeeshan Manzoor / Singh, Yogendra / Agarwal, Pankaj	Characterization of mechanical behavior of different types of masonry with a detailed investigation of full-field strain using digital image correlation	133502
He, Huan / Zhang, Chen / Yang, Jiahao / Li, Man / Fu, Wei / Senetakis, Kostas / Zhang, Dingwen / Liu, Songyu	Characterization of recycled concrete aggregate (RCA) particles for geotechnical engineering applications: Particle strength and interparticle contact behavior	133532
Masi, Giulia / Dal Pozzo, Alessandro / Ugolotti, Greta / Tugnoli, Alessandro / Sassoni, Enrico	Choosing the consolidant for carbonate substrates: Technical performance and environmental sustainability of selected inorganic and organic products	133599
Ul Arifeen, Siyab / Amin, Muhammad Nasir / Ahmad, Waqas / Althoey, Fadi / Ali, Mujahid / Alotaibi, Badr Saad / Abuhussain, Mohammed Awad	A comparative study of prediction models for alkali-activated materials to promote quick and economical adaptability in the building sector	133485
Zajac, Maciej / Song, Jiayi / Skocek, Jan / Ben Haha, Mohsen / Skibsted, Jørgen	Composite cements with aqueous and semi-dry carbonated recycled concrete pastes	133362
Adresi, Mostafa / Yamani, Alireza / Karimaei Tabarestani, Mojtaba / Rooholamini, Hamed	A comprehensive review on pervious concrete	133308
Torkan, Azam / Hejazi, Sayyed Mahdi / Abtahi, Sayyed Mahdi / Shayannejad, Mohammad	Design and fabrication of fibrous media to facilitate autogenous smart self-healing properties in cracked-cementitious structures using polyethylene glycol (PEG) and silicon dioxide nanoparticles	133518
Jia, Ruiquan / Wang, Qiang / Luo, Ting	Deterioration and mitigation of efflorescence of alkali-activated phosphorus slag	133500
Suryanto, B. / Higgins, J. / Aitken, M. W. / Tambusay, A. / Suprobo, P.	Developments in Portland cement/GGBS binders for 3D printing applications: Material calibration and structural testing	133561
Doussang, Lola / Samson, Gabriel / Deby, Fabrice / Huet, Bruno / Guillon, Emmanuel / Cyr, Martin	Durability parameters of three low-carbon concretes (low clinker, alkali-activated slag and supersulfated cement)	133511
Al-Ameen, Eeman / Blanco, Ana / Cavalaro, Sergio	Durability, permeability, and mechanical performance of sprayed UHPC, as an attribute of fibre content and geometric stability	133393
Gupta, Sanjoli / Kumar, Suresh	Dynamic behavior of geopolymer stabilized kaolin clay under long-term cyclic loading	133562
Bayrak, Barış / Çelebi, Oğuzhan / Öz, Ali / Ustabas, Ilker / Kaplan, Gökhan / Aydın, Abdulkadir Cüneyt	Effect of aluminosilicate precursors and curing regime on physico-mechanical durability and microstructural characteristics of coral geopolymers (Cor-Geo): Cleaner production for coral islands	133596
Mohd Ghazali, Mohd Fahmi Haikal / Mohd Hasan, Mohd Rosli / Abu Seman, Anasyida / Salleh, Abdul Hakim / Mukhtar, Najib / Osman, Hanizah / Uwanuakwa, Ikenna D.	The effect of corrosion on the capability of asphalt mortar to induce healing via microwave heating system	133495
Cao, Zhilong / Yu, Jianying / Yi, Juan / Sun, Guoqiang / Qiu, Kexin / Xu, Song / Han, Xiaobin	Effect of different rejuvenation methods on the fatigue behavior of aged SBS modified asphalt	133494
Gu, Zhicheng / Wang, Yuxuan / Chen, Peiyuan / Wang, Yonghui / Xie, Jiankai / Zhao, Cheng / Wang, Xianggeng	Effect of fly ash modified plastic particles using heat welding method on performance and interface modification mechanism of mortars	133481
Wu, Di / Dong, Xiaoye / Xiao, Xiaochun / Sun, Weiji / Miao, Feng / Zhai, Wenbo	Effect of the gradation of binary mixed particle materials on compressive strength and permeability	133526
Manjari, T. / Manoharan, V. / Ramamurthy, K.	Effective utilization of mine overburden soil in producing aggregates by pelletization and sintering	133408
Romanazzi, A. / Oliveira, D. V. / Silva, R. A. / Barontini, A.	Effectiveness of a TRM solution for rammed earth under in-plane cyclic loads	133551
Dai, Jiasheng / Ma, Feng / Fu, Zhen / Liu, Jenny / Li, Chen / Hou, Yingjie / Wu, Hanli	Effectiveness of the different eutectic phase-change materials in cooling asphalt pavement	133491
Ma, Panpan / An, Xin / Wang, Feibin / Huang, Hui / Chen, Zhiyuan / Wang, Shuo / Gong, Meng / Que, Zeli	Effects of pre-heating treatment parameters on dimensional stability and mechanical properties of densified Chinese fir	133484
He, Zhengshu / He, Chuan / Kang, Xiaoyue / Huang, Xing / Wang, Shimin / Xu, Guowen	Effects of sustained load and reinforcement spacing on the evolution and spatial characteristics of corrosion damages in RC segmental specimens	133462
Wang, Xin / Hu, Xiang / Chong, Linlin / Yang, Jianming / Shi, Caijun	Effects of the combination of NH4H2PO4 and KH2PO4 on the interfacial bond between magnesium phosphate cement and steel fiber	133405
EL Achrafi, Mohamad Khodor / Bonnet, Stéphanie / Villain, Géraldine	Electrical resistivity tomography results analyzed with two inversion methods to determine chloride profiles on BFS concrete having very high electrical resistivity	133361
Afgan, Sher / Kiran, Ravi / Qi, Xiaoning / Bajwa, Dilpreet S.	Enhancement of corrosion resistance and bond strength in rebars employing abrasives-infused soy-protein isolate coatings	133455
Sim, Sungwon / Hoon Rhee, Jeong / Oh, Jae-eun / Kim, Gun	Enhancing the durability performance of thermally damaged concrete with ground-granulated blast furnace slag and fly ash	133538
Majdoubi, H. / Haddaji, Y. / Bourzik, O. / Nadi, M. / Ziraoui, J. / Alomayri, T. S. / Oumam, M. / Manoun, B. / Alami, J. / Tamraoui, Y. / Hannache, H.	Enhancing thermal insulation with phosphate washing sludge waste as an inorganic foaming agent in porous acid-based geopolymers: Formulation and processing optimization	133486
Candelaria, Ma. Doreen E. / Kee, Seong-Hoon	Evaluation of thermal damages of concrete subjected to high temperatures using recurrent neural networks for ultrasonic pulse waves	133416
Yao, Tianshuai / Tian, Qing / Zhang, Miao / Qi, Shuai / Wang, Cheng / Ruan, Mengyue / Xu, Gelong / Cai, Jiwei	Experimental research on the preparation and properties of foamed concrete using recycled waste concrete powder	133370
Rui, Aoyu / Wang, Li / Lin, Wenyu / Ma, Guowei	Experimental study on damage anisotropy of 3D-printed concrete exposed to sulfate attack	133590
Alnahhal, Ahmed Mahmoud / Alengaram, U. Johnson / Ibrahim, Muhammad Shazril Idris / Radwan, Mohammed K. H. / Ayough, Pouria	Extraction of home brewed sodium silicate from palm oil fuel ash and its effect on alkali activated materials	133440
Zhu, Zhiwen / Abdelbaset, Hesham / Li, Xianghong / Tang, Qin	Flexural behavior of long-term loaded RC beams strengthened by ultra-high performance concrete	133428
Vega-Pava, Oscar / Torrente-Prato, Gabriel	Flexural strength increases of concrete with AISI 4140 steel chip as reinforcement	133512
Alarrak, Rashed / Jeon, Byeonguk / Brand, Alexander S.	Flexural toughness of extruded fiber-reinforced mortar with preferentially aligned fibers	133528
Dong, Liang / Zhang, Shaohua / Gan, Tiansiyu / Qiu, Yan / Song, Qinfeng / Zhao, Yongtao	Frequency characteristics analysis of pipe-to-soil potential under metro stray current interference using continuous wavelet transform method	133453
Nakai, Fumiaki / Ishida, Takato	Gas diffusion in cement pastes: An analysis using a fluctuating diffusivity model	133411
David Unobe, Ikwulono / Ni, Shuna	Impact of vehicle fire exposure on polymer concrete overlays	133284
Kumar, Dhanendra / Mi, Tangwei / Yang, En-Hua	Improving the material sustainability of strain-hardening magnesium-silicate-hydrate composite by incorporating aggregates	133576
Cardoso, Josué / Ferreira, Adelino / Almeida, Arminda / Santos, Joao	Incorporation of plastic waste into road pavements: A systematic literature review on the fatigue and rutting performances	133441
Haefliger, Severin / Thoma, Karel / Kaufmann, Walter	Influence of a triaxial stress state on the load-deformation behaviour of axisymmetrically corroded reinforcing bars	132737
Al-Mansouri, Omar / Pinoteau, Nicolas / Mege, Romain / Marchetti, Véronique	Influence of cure time, temperature, and moisture on mechanical properties of a fast cure adhesive for post-installed rebar application	133615
Miranda de Souza, Ariel / Franco de Carvalho, José Maria / Salgado, Igor Lopes / Rezende Santos, Carol Ferreira / Ferreira, Flávio Antônio / Pedroti, Leonardo Gonçalves / Castillo Lara, Rancés / Fiorotti Peixoto, Ricardo André	Influence of filler/cement and powder/total solids on the mixture design of self-compacting micro-concretes containing waste from the ornamental stone industry	133445
Delgado-Plana, P. / García-Díaz, A. / Bueno-Rodríguez, S. / Eliche Quesada, D.	Influence of NaOH molarity and Portland cement addition on performance of alkali activated cements based in silicomanganese slags	133544
Arabani, Mahyar / Shalchian, Mohammad Mahdi / Majd Rahimabadi, Maryam	The influence of rice fiber and nanoclay on mechanical properties and mechanisms of clayey soil stabilization	133542
Lin, Bozhong / Fang, Hu / Yao, Yao	Interfacial bonding mechanism between fire exposed and functionalized carbon nanotube mortar	133521
Lai, Yufeng / Liu, Xuanqi / Li, Yifan / Leonidas, Emilios / Fisk, Callum / Yang, Jiansheng / Zhang, Yang / Willmott, Jon	Investigating the fire-retardant efficiency of intumescent coatings on inclined timber: A study on application strategies and heat transfer mechanisms	133586
Wang, Xuerui / Liu, Dingyi / Sun, Baojiang / Liu, Shujie / Wang, Zhiyuan / Gao, Yonghai	Investigation of multi-field coupling mechanisms during well cement through gas hydrate layer in horizontal well	133505
Ziari, Hassan / Nasiri Amiri, Elaheh / Ayar, Pooyan	Investigation of the combination of microwave heating and calcium alginate capsule rejuvenation healing methods for cold mix asphalt considering the type of compaction effort	133437
Chen, Shaojie / Ren, Jianxi / Liu, Lang / Wang, Lei / Li, Yugen / Ren, Xiang	Investigation of the dynamic compressive mechanical properties of concrete under the combined effects of freeze–thaw and salt erosion	133548
Xu, Li / Ma, Xiaomeng / Pan, Jinlong / Zhou, Jiajia / Wang, Xiaoyi / Liu, Weiren	Investigation on bond behavior of steel-FRP composite bars in engineered cementitious composites by spliced beam tests	133480
Li, Hao / Yang, Haiqing / Li, Xingyue	Investigation on the working performance of a non-dispersible grouting material for the crack repairment of underwater structures	133558
Liu, Jian / Liu, Fangyu / Wang, Zhen / Fanijo, Ebenezer O. / Wang, Linbing	Involving prediction of dynamic modulus in asphalt mix design with machine learning and mechanical-empirical analysis	133610
Geckil, Tacettin / Ince, Ceren Beyza / Aksağan, Zülfükar	Laboratory evaluation of oak ash waste for use in hot mix asphalt modification	133617
Niknam, Mohammad Javad / Aghayan, Iman / Behzadian, Reza / Ghahremani, Mahdi	Laboratory evaluation of the effect of microfibers on the low-temperature cracking performance of grouted macadam mixtures	133426
Jiménez-García, E. de J. / Arellano-Vazquez, D. A. / Titotto, S. / Vilchis-Nestor, A. R. / Mayorga, M. / Romero-Salazar, L. / Arteaga-Arcos, J.C	A low environmental impact admixture for the elaboration of unfired clay building bricks	133470
Santorsola, Jordan / Butler, Liam J.	Material behaviour and flexural performance of low carbon concrete beams containing very high quantities of recycled and secondary materials	133350
Zheng, Chaorong / Sun, Kuo / Chen, Yixiao / Zhang, Wenyuan / Wu, Yue	Mechanical and thermal properties of environmentally friendly straw boards	133493
Jiang, Wei / Ling, Xianwu / Yuan, Dongdong / Xiao, Jingjing / Ren, Xueyuan / Li, Jingxiao / Fu, Zhiyu	Mechanical response of asphalt steel plastic pavement structure based on finite element simulation and scale load test	133490
Liu, Jianglin / Li, Yue / Jin, Caiyun / Li, Yaqiang / Lin, Hui / Shen, Jiale	Mechanism study on the effect of diammonium hydrogen phosphate on the setting time and micro-nanostructure of ordinary Portland cement paste	133616
Liu, Jianan / Wang, Zhenjun / Jing, Haosen / Jia, Hongyao / Zhou, Liang / Chen, Hao / Zhang, Lei	Microwave self-healing characteristics of bituminous mixtures with different steel slag aggregate and waste ferrite filler	133304
Kieufack, G. / Fagel, N. / Tchamba, A. B. / Bomeni, I. Y. / Ngapgue, F. / El Ouahabi, M. / Wouatong, A. S. L.	Mineralogical and physico-chemical characterization of alluvial clays from Bamendou-Balessing (West Cameroon): Suitability for ceramics	133396
Zhao, Pinhui / Zhou, Xu / Yang, Yansheng / Wang, Changwei / Wang, Chenlong / Liang, Hanyue / Li, Chen / Ren, Haiqing	Molecular dynamics simulation study of the effect of molecular structure of warm mix additive on lubricating properties	133529
Yang, Peixing / Dong, Fuqiang / Yu, Xin / Guo, Yongjia / Jin, Yong / Chen, Bei / Jiang, Yang / Liu, Kaixin	Molecular study on diffusion behavior and performance recovery of aged asphalt binder containing functional rejuvenators	133536
Bagheriehnajjar, Gazelle / Yousefpour, Hossein / Rahimnejad, Mostafa	Multi-objective optimization of mycelium-based bio-composites based on mechanical and environmental considerations	133346
Bezemer, H. J. / Awasthy, N. / Luković, M.	Multiscale analysis of long-term mechanical and durability behaviour of two alkali-activated slag-based types of concrete	133507
Bortoletto, M. / Sanches, A. O. / Santos, J. A. / da Silva, R. G. / Tashima, M. M. / Payá, J. / Soriano, L. / Borrachero, M. V. / Malmonge, J. A. / Akasaki, J. L.	New insights on understanding the Portland cement hydration using electrical impedance spectroscopy	133566
Gattesco, Natalino / Rizzi, Emanuele / Boem, Ingrid / Dudine, Allen / Gams, Matija	A new method of seismic strengthening stone masonry with CRM coatings on one side	133565
Hu, Mingjun / Sun, Daquan / Li, Bin / Xu, Lei / Sun, Yiren	A novel aging acceleration rate equation for accelerated weather aging test of high viscosity modified asphalt: Theoretical derivation and experimental correction	133525
Lin, Wuguang / Li, Xiaolong / Han, Hao / Yu, Qifeng / Cho, Yoon-Ho	A novel approach for pavement distress detection and quantification using RGB-D camera and deep learning algorithm	133593
Sun, Qiaorong / Zhang, Bo / Shi, Kejun / Gupta, Rishi / Zhu, Zhenyang / Qiang, Sheng	A novel method for solving hydration heat release based on equivalent heat release theory	133506
Ye, Shuhang / Lu, Cong / She, Peiyun / Li, Zhenghao / Xie, Tianyu / Leung, Christopher K. Y.	Numerical model of tensile behavior of textile reinforced concrete (TRC) based on stress field analysis	133568
Meng, Yuhong / Wang, Qiong / Su, Wei / Ye, Weimin / Chen, Yonggui	On the evolution of hydration cracks of compacted bentonite under different boundary conditions	133387
Chen, Xuyong / Lv, Long / Wu, Qiaoyun / Cheng, Shukai / Zhou, Qi / Zhao, Cheng / Fan, Tao / Zhao, Rixu	Optimization on the mix design method of self-compacting concrete with recycled coarse aggregate based on paste rheological threshold theory and material packing characteristics	133509
Olofinnade, Oluwarotimi M. / Osoata, Osamudiame P.	Performance assessment of mechanical properties of green normal strength concrete produced with metakaolin-cement coated recycled concrete aggregate for sustainable construction	133508
Faizi, Koohyar / Beetham, Paul / Kromanis, Rolands	Performance evaluation of rail trackbed stiffness: pre and post stabilisation	133452
Hu, Mingjun / Sun, Daquan / Sun, Guoqiang / Sun, Yiren / Ouyang, Jian	Performance study on anti-weather aging combinations for high-content polymer modified asphalt and comparison by improved multi-scale mathematical TOPSIS method	133357
Shahnewaz, Shoaib Md / Masri, Khairil Azman / Ahmad Abdul Ghani, Nadiatul Adilah / Jaya, Ramadhansyah Putra / Choo, Chin Siew / Giannakopoulou, Panagiota P. / Rogkala, Aikaterini / Lampropoulou, Paraskevi / Petrounias, Petros	Porous asphalt mixtures enriched with bamboo fibers as a new approach for future sustainable construction	133456
Sharma, Akshay / Roy, A. B. Danie / Bansal, Prem Pal	Post-heating evaluation of fibre reinforced concrete with LC3 binder as replacement to OPC	133603
Xiao, Manzhe / Luo, Rong / Chen, Yu / Ge, Xinmin	Prediction model of asphalt pavement functional and structural performance using PSO-BPNN algorithm	133534
Ding, Yongjie / Wei, Wei / Wang, Jiaojiao / Wang, Yanghui / Shi, Yuxin / Mei, Zijun	Prediction of compressive strength and feature importance analysis of solid waste alkali-activated cementitious materials based on machine learning	133545
Guo, Kaihua / Wang, Mengyao / Feng, Xiao / Yan, Haochen / Mao, Yunfei / Han, Zhaofeng / Ng, Wai Lam / Guan, Mingfu / Chen, Ji	Prediction of water film depth on grooved airport runway induced by intense rainfall and wind	133623
Cao, Pengxu / Xing, Lang / Luo, Jun / Jiang, Hao / Zhang, Xin / Li, Guanghui	Preparation of calcium silicate board from tobermorite-rich residue for energy conservation in buildings	133547
Zrar, Yarivan J. / Younis, Khaleel H. / Sherwani, Aryan Far H.	Properties of sustainable self-compacted concrete with recycled concrete and waste tire crumb rubber aggregates	133524
Li, Kenan / Yan, Xili / Pu, Jiheng / Wang, Yujie / Chen, Yu / Fang, Kai / Hu, Jiajun / Yang, Yi	Quantitative evaluation on the energy saving and emission reduction characteristics of warm mix asphalt mixtures	133465
Zhang, Biao / Liu, Pengwei / Qi, Nan / Luo, Hongjie / Wang, Fen / Ma, Tao / Zhao, Xichen / Fei, Guiqiang / Yin, Shu / Zhu, Jianfeng / Shi, Pei	Regulation of oxidation degree for graphene oxide on hydration process and engineering properties of natural hydraulic lime pastes for grout strengthening of stone cultural relics	133482
Wang, Her-Yung / Chang, Jung-Nan / Hung, Chang-Chi	Research on the engineering performance of concrete containing waste liquid crystal glass and volcanic ash in a hot spring environment	133488
Liu, Yanping / Xie, Jianguang / Wei, Dingbing / Tan, Yangwei	Research on the permanent deformation mechanism and dynamic meso-mechanical response of porous asphalt mixture composite structure using the discrete element method	133531
Liao, Qiao / Yu, Jiang-Tao / Su, Yuan-Rui / Yu, Ke-Quan	Shear failure mechanism and parametric study for seawater sea-sand engineered cementitious composites beams reinforced by FRP bars: Finite element analysis	133497
Wang, Chenxin / Zou, Xingxing / Sneed, Lesley H. / Zhang, Feng / Zheng, Kaiqi / Xu, Hao / Li, Guofen	Shear strength prediction of FRP-strengthened concrete beams using interpretable machine learning	133553
Cao, Qingyu / Yuan, Xiongzhou / Amin, Muhammad Nasir / Ahmad, Waqas / Althoey, Fadi / Alsharari, Fahad	A soft-computing-based modeling approach for predicting acid resistance of waste-derived cementitious composites	133540
Ishaq, Mubashera / Kamran, Kashif / Ahad Hussain, Abdul / Hina, Maryam	Sorption of modified clay minerals in pore solution of fired clay brick under pulsed current	133503
Azevedo, Ana / Almeida, João / Gonçalves, Márcio / Simões, Nuno / Castro, Nuno / Santos, Ana / Tadeu, António	Strategies to enhance the resistance of ETICS finishing coats to microbiological growth: A systematic study based on small- and large-scale laboratory tests	133499
Zhao, Shujie / Lu, Wei / Li, Dongwei / Xia, Ming	Study on acid resistance and high temperature resistance of composite geopolymer-stabilized lead–zinc tailing	133554
Guo, Lixia / Jia, Zhan / Zhong, Ling / Chen, Shoukai	Study on failure characteristics of baking-free bricks with wrap-shell aggregate	133541
Nisar, Jasim / Mir, Mohammad Shafi	Study on optimal preparation and rheological characteristics of waste low density polyethylene (LDPE)/styrene butadiene styrene (SBS) composite modified asphalt binder	133459
Mulugeta Alamnie, Mequanent / Taddesse, Ephrem / Hoff, Inge	A study on permanent deformation and fatigue damage interaction in asphalt concrete	133473
Hu, Haitao / Zhan, Qiwei / Zhang, Xuan / Zhou, Juanlan	Study on synthesizing MgAl-LDH in the concrete crack zone to enhance microbial mineralization capacity	133594
Guo, Xiao / Xie, Kaizhong / Liu, Zhenwei / Elchalakani, Mohamed / Zhou, Yiming	A study on the bond strength of interface between post-fire concrete and different epoxy resin adhesives	133429
Guan, Mingyang / Guo, Meng / Tan, Yiqiu / Du, Xiuli	Study on the effect of aging on cracking resistance of virgin asphalt binder and its evolution model	133443
Zeyad, Abdullah M.	Sustainable concrete Production: Incorporating recycled wastewater as a green building material	133522
Woo, Suji / Choi, Young Cheol	Synthesis of calcium silicate hydrate nanoparticles and their effect on cement hydration and compressive strength	133559
Ran, Hongyu / Elchalakani, Mohamed / Sadakkathulla, Mohamed Ali / Cai, Jingming / Xie, Tianyu	Thermoelectric ultra-lightweight high-performance ECC using cenospheres and calcined petroleum coke	133513
Al-Kroom, Hussein / Abd Elrahman, Mohamed / Tawfik, Taher A. / Meddah, Mohammed S. / Shalaby, Heba M. / Saleh, Alaa A. / Abdel-Gawwad, Hamdy A.	Transforming calcium carbonate–silicate wastes into steel protective coatings	133527
Yang, Kai / Cui, Hongjun / Ma, Xinwei / Zhu, Minqing	Understanding and characterizing the fatigue cracking resistance of asphalt binder at intermediate temperature: A literature review	133432
Şahan, Neslihan / Kumandaş, Aytuğ / Kabadayı, Ersoy / Çavdar, Erman / Oruç, Şeref	The use of wax-based additives in bitumen modification: A systematic quantitative literature review	133423
Akbas, Merve / Özaslan, Bilal / Iyisan, Recep	Utilization of recycled concrete aggregates for developing high-performance and durable flexible pavements	133479
Song, Qiao / Wang, Xianfeng / Fang, Yuan / Xing, Feng	XFEM and machine learning combined approach for failure prediction of microcapsules in cement-based self-healing materials	133515

Informations
sur cette fiche
IssueID
70973
Publié(e) le:
28.10.2023
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - décembre 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - décembre 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.