Construction and Building Materials - mars 2021

Publié:	mars 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Yi, Yuan-Rong / Lin, Yue / Du, Yun-Cong / Bai, Shu-qi / Ma, Zhong-le / Chen, Yin-guang	Accelerated carbonation of ladle furnace slag and characterization of its mineral phase	122235
Wu, Meng / Sui, Shiyu / Zhang, Yunsheng / Jia, Yantao / She, Wei / Liu, Zhiyong / Yang, Yonggan	Analyzing the filler and activity effect of fly ash and slag on the early hydration of blended cement based on calorimetric test	122201
Ruegenberg, Frowin / Schidlowski, Martin / Bader, Tobias / Diekamp, Anja	Assessing the influence of the mixing method on porosity and durability of NHL-based renders based on key parameters	122197
Lollini, Federica / Redaelli, Elena	Carbonation of blended cement concretes after 12 years of natural exposure	122122
Sadrolodabaee, Payam / Claramunt, Josep / Ardanuy, Mònica / de la Fuente, Albert	Characterization of a textile waste nonwoven fabric reinforced cement composite for non-structural building components	122179
Ghorbani, Mona / Dahrazma, Behnaz / Saghravani, Seyed Fazlolah / Yousofizinsaz, Ghazaleh	A comparative study on physicochemical properties of environmentally-friendly lightweight bricks having potato peel powder and sour orange leaf	121937
Khusru, Shovona / Fawzia, Sabrina / Thambiratnam, David P. / Elchalakani, Mohamed	Confined rubberised concrete tubular column for high-performance structures – Review	122216
Ogawa, Yuko / Uji, Kimitaka / Ueno, Atsushi / Kawai, Kenji	Contribution of fly ash to the strength development of mortars cured at different temperatures	122191
Bi, Yanqiu / Guo, Fucheng / Zhang, Jiupeng / Pei, Jianzhong / Li, Rui	Correlation analysis between asphalt binder/asphalt mastic properties and dynamic modulus of asphalt mixture	122256
Cárdenas-Haro, Xavier / Todisco, Leonardo / Leon, Javier	Database with compression and bending tests on unbaked earth specimens and comparisons with international code provisions	122232
Liu, Minghui / Li, Wanju / Guo, Fei / Wang, Hankun / Zhang, Xuexia / Yu, Yan	Dimensionally stable and highly durable bamboo material prepared through a simple surface furfurylation	122156
Xiong, Zhe / Wei, Wei / He, Shaohua / Liu, Feng / Luo, Hanwei / Li, Lijuan	Dynamic bond behaviour of fibre-wrapped basalt fibre-reinforced polymer bars embedded in sea sand and recycled aggregate concrete under high-strain rate pull-out tests	122195
Mastoras, Filippos / Varveri, Aikaterini / van Tooren, Maaike / Erkens, Sandra	Effect of mineral fillers on ageing of bituminous mastics	122215
Shaban, Wafaa Mohamed / Elbaz, Khalid / Yang, Jian / Thomas, Blessen Skariah / Shen, Xiaohan / Li, Lihui / Du, Yuhang / Xie, Jianhe / Li, Lijuan	Effect of pozzolan slurries on recycled aggregate concrete: Mechanical and durability performance	121940
Ramlee, Nor Azlina / Jawaid, Mohammad / Abdul Karim Yamani, Shaikh / Syams Zainudin, Edi / Alamery, Salman	Effect of surface treatment on mechanical, physical and morphological properties of oil palm/bagasse fiber reinforced phenolic hybrid composites for wall thermal insulation application	122239
Sangsefidi, Ebrahim / Larkin, Tam Joseph / Wilson, Doug James	The effect of weathering on the engineering properties of laboratory compacted unbound granular materials (UGMs)	122242
Hong, Shuxian / Qin, Shaofeng / Liu, Zheming / Liu, Min / Zhang, Yuxin / Dong, Biqin	Enhanced corrosion resistance and applicability of Mg/Al-CO32− layered double hydroxide film on Q235 steel substrate	122259
Pateriya, A. S. / Dharavath, K. / Robert, D. J.	Enhancing the strength characteristics of No-fine concrete using wastes and nano materials	122222
Sahoo, Sangram K. / Mohapatra, Benu G. / Patro, Sanjaya K. / Acharya, Prasanna K.	Evaluation of graded layer in ground granulated blast furnace slag based layered concrete	122218
Rubin, Ariane Prevedello / Hasse, Jessica Amanda / Longuini Repette, Wellington	The evaluation of rheological parameters of 3D printable concretes and the effect of accelerating admixture	122221
Huang, Jiandong / Shiva Kumar, G. / Sun, Yuantian	Evaluation of workability and mechanical properties of asphalt binder and mixture modified with waste toner	122230
Lee, Seong-Hyeok / Eum, Ki-Young / Le, Tri Ho Minh / Park, Dae-Wook	Evaluation on mechanical behavior of asphalt concrete trackbed with slab panel using full-scale static and dynamic load test	122207
Araya-Letelier, G. / Antico, F. C. / Burbano-Garcia, C. / Concha-Riedel, J. / Norambuena-Contreras, J. / Concha, J. / Saavedra Flores, E. I.	Experimental evaluation of adobe mixtures reinforced with jute fibers	122127
Sui, Yuwu / Liu, Shu / Ou, Chuping / Liu, Qinlei / Meng, Guanming	Experimental investigation for the influence of graphene oxide on properties of the cement-waste concrete powder composite	122229
Sun, Xiaofeng / He, Minjuan / Liang, Feng / Li, Zheng / Wu, Liji / Sun, Yongliang	Experimental investigation into the mechanical properties of scrimber composite for structural applications	122234
Dalal, Sejal P. / Dalal, Purvang	Experimental Investigation on Strength and Durability of Graphene Nanoengineered Concrete	122236
Zhao, Wenhu / Du, Chengbin / Sun, Liguo / Chen, Xiaocui	Experimental study on fracture behaviour of concrete after low-cycle reciprocating loading	122190
Zhao, Xiaokang / Dong, Qiao / Chen, Xueqin / Xiao, Yuanjie / Zheng, Debiao	Fatigue damage numerical simulation of cement-treated base materials by discrete element method	122142
Ríos, José D. / Cifuentes, Héctor / Blasón, Sergio / López-Aenlle, Manuel / Martínez-De La Concha, Antonio	Flexural fatigue behaviour of a heated ultra-high-performance fibre-reinforced concrete	122209
Qureshi, Farsan Ali / Ahmad, Naveed / Ali, Hafiz Muhammad	Heat dissipation in bituminous asphalt catalyzed by different metallic oxide nanopowders	122220
Li, Pengfei / Ran, Jun / Nie, Ding / Zhang, Wu	Improvement of mix design method based on paste rheological threshold theory for self-compacting concrete using different mineral additions in ternary blends of powders	122194
Zhou, Feifei / Pan, Ganghua / Mi, Renjie / Zhan, Mimi	Improving the properties of concrete using in situ-grown C-S-H	122214
Fuan, Si / Ke, Ma / Kanghe, Liu / Kun, Li / Aliha, M. R. M.	Influence of specimen geometry on mode I fracture toughness of asphalt concrete	122181
Liu, Pan / Zhang, Qin-Hao / Hu, Ji-Ming / Cao, Fa-He	Interesting phenomena for Al-Zn-Mg aluminum alloy after two years of storage: A comparative study on microstructure, mechanical properties and corrosion behavior of aluminum alloy with different aging treatments	122210
Zhong, Haobai / Huang, Weidong / Yan, Chuanqi / Zhang, Yuan / Lv, Quan / Sun, Lijun / Liu, Liyuan	Investigating binder aging during hot in-place recycling (HIR) of asphalt pavement	122188
Wang, Xiaowei / Ren, Jiaxing / Gu, Xingyu / Li, Ning / Tian, Zeyu / Chen, Hongqing	Investigation of the adhesive and cohesive properties of asphalt, mastic, and mortar in porous asphalt mixtures	122255
Liu, Yang / Tsang, Kin Shun / Tan Zhi'En, Eddie / Subramaniam, Nellian Alagu / Pang, John Hock Lye	Investigation on material characteristics and fatigue crack behavior of thermite welded rail joint	122249
Villca, Ariel R. / Soriano, Lourdes / Font, Alba / Tashima, Mauro M. / Monzó, José / Borrachero, María Victoria / Payá, Jordi	Lime/pozzolan/geopolymer systems: Performance in pastes and mortars	122208
Gao, Yun / Wu, Kai / Yuan, Qiang	Limited fractal behavior in cement paste upon mercury intrusion porosimetry test: Analysis and models	122231
Gong, Mingyang / Zhou, Beichen / Chen, Jingyun / Sun, Yiren	Mechanical response analysis of asphalt pavement on concrete curved slope bridge deck based on complex mechanical system and temperature field	122206
Zajac, Maciej / Bolte, Gerd / Skocek, Jan / Ben Haha, Mohsen	Modelling the effect of the cement components fineness on performance and environmental impact of composite cements	122108
Ramani, Vasantha / Kuang, Kevin Sze Chiang	Monitoring of rebar corrosion in concrete structures using a lens-based plastic optical fiber (LPOF) sensor	122129
Ding, Xinxin / Zhao, Minglei / Li, Changyong / Li, Jie / Zhao, Xusheng	A multi-index synthetical evaluation of pull-out behaviors of hooked-end steel fiber embedded in mortars	122219
Li, Yue / Zhang, Guosheng / Hou, Dongshuai / Wang, Zigeng	Nanoscale insight on the initial hydration mechanism of magnesium phosphate cement	122213
Alzaza, Ahmad / Ohenoja, Katja / Illikainen, Mirja	One-part alkali-activated blast furnace slag for sustainable construction at subzero temperatures	122026
Jiang, Shengqiang / Chen, Xiaodong / Cao, Guodong / Tan, Yuanqiang / Xiao, Xiangwu / Zhou, Yupeng / Liu, Sisi / Tong, Zhenggang / Wu, Yihui	Optimization of fresh concrete pumping pressure loss with CFD-DEM approach	122204
Benmokrane, Brahim / Mousa, Salaheldin / Mohamed, Khaled / Sayed-Ahmed, Mahmoud	Physical, mechanical, and durability characteristics of newly developed thermoplastic GFRP bars for reinforcing concrete structures	122200
Chiker, Tarek / Belkadi, Ahmed Abderraouf / Aggoun, Salima	Physico-chemical and microstructural fire-induced alterations into metakaolin-based vegetable and polypropylene fibred mortars	122225
Razzaghi, Hossein / Madandoust, Rahmat / Aghabarati, Hassan	Point-load test and UPV for compressive strength prediction of recycled coarse aggregate concrete via generalized GMDH-class neural network	122143
Ying, Weichao / Zhang, Ge / Liu, Qi / Yang, Yingzi	Predicting the time-dependent hydro-thermo-mechanical properties of cement-based materials based on thermodynamic and multi-scale modeling	122155
Thai, Duc-Kien / Nguyen, Duy-Liem / Pham, Thai-Hoan / Doan, Quoc Hoan	Prediction of residual strength of FRC columns under blast loading using the FEM method and regression approach	122253
Yang, Jing / Muhammad, Yaseen / Yang, Caili / Liu, Yu / Su, Zhibin / Wei, Yunhao / Li, Jing	Preparation of TiO2/PS-rGO incorporated SBS modified asphalt with enhanced resistance against ultraviolet aging	121461
Lyu, Zhenghua / Shen, Aiqin / Meng, Weina	Properties, mechanism, and optimization of superabsorbent polymers and basalt fibers modified cementitious composite	122212
Xu, Ling-Yu / Alrefaei, Yazan / Wang, Yan-Shuai / Dai, Jian-Guo	Recent advances in molecular dynamics simulation of the N-A-S-H geopolymer system: modeling, structural analysis, and dynamics	122196
Silva Araujo, Gregorio Luis / Suarez Moreno, Jaime Alberto / Zornberg, Jorge G.	Shear behavior of mixtures involving tropical soils and tire shreds	122061
Wang, Dafu / Zhang, Yunsheng / Xiao, Jia / Huang, Tingjie / Wu, Meng / Zuo, Shenghao / Yang, Yonggan	Structural kinetics constitutive models for characterizing the time-dependent rheologic behaviors of fresh cement paste	122175
Shang, Huai-shuai / Zhou, Jun-Hao / Fan, Guo-xi / Yang, Guo-Tao / You, Wei-jie	Study on the bond behavior of steel bars embedded in concrete under the coupling of sustained loads and chloride ion erosion	121684
Li, Haibin / Zhang, Fan / Feng, Zixuan / Li, Wenbo / Zou, Xiaolong	Study on waste engine oil and waste cooking oil on performance improvement of aged asphalt and application in reclaimed asphalt mixture	122138
Kaufmann, Josef / Loser, Roman / Winnefeld, Frank / Leemann, Andreas	Sulfate resistance testing of shotcrete – Sample preparation in the field and under laboratory conditions	122233
Mahmoodi, Obaid / Siad, Hocine / Lachemi, Mohamed / Şahmaran, Mustafa	Synthesis and optimization of binary systems of brick and concrete wastes geopolymers at ambient environment	122217
Yaphary, Yohannes L. / Lu, Jian-xin / Zhao, Bin / Cheng, Hiu Wun / Shen, Peiliang / Xuan, Dongxing / Poon, Chi Sun	Utilization of CO2 cured CSW-MSWIBA cold bonded aggregate into lightweight concrete products for masonry units	122203
Hernandez-Fernandez, Noe / Ossa-López, Alexandra	Validation of partial time-temperature superposition principle in thermorheologically complex asphalts	122224
Li, Yu / Qiang, Sheng / Xu, Wenqiang / Hua, Xia / Xu, Chao / Lai, Jiayu / Yuan, Min / Chen, Bo	Verification of concrete nonlinear creep mechanism based on meso-damage mechanics	122205
Wei, Wei / Shao, Zhushan / Qiao, Rujia / Chen, Wenwen / Zhang, Pengju / Cheng, Junxi	Workability and mechanical properties of microwave heating for recovering high quality aggregate from concrete	122237

Informations
sur cette fiche
IssueID
66196
Publié(e) le:
17.06.2022
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mars 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mars 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.