Construction and Building Materials - août 2021

Publié:	août 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Dung, N. T. / Unluer, C.	Advances in the hydration of reactive MgO cement blends incorporating different magnesium carbonates	123573
Mortazavi Bak, Hamid / Kariminia, Tahereh / Shahbodagh, Babak / Rowshanzamir, Mohammad A. / Khoshghalb, Arman	Application of bio-cementation to enhance shear strength parameters of soil-steel interface	123470
Hui, Cun / Li, Yonggang / Zhou, Zhongyi / Hai, Ran	Behavior of concrete-filled GFRP tube columns under cyclic axial compression	123566
Chun, Booki / Kim, Soonho / Yoo, Doo-Yeol	Benefits of chemically treated steel fibers on enhancing the interfacial bond strength from ultra-high-performance concrete	123519
Ozturk, Murat / Chung, D. D. L.	Capacitance-based stress self-sensing effectiveness of a model asphalt without functional component	123591
Fares, Ali Issa / Sohel, KMA / Al-Jabri, K. / Al-Mamun, Abdullah	Characteristics of ferrochrome slag aggregate and its uses as a green material in concrete – A review	123552
Gencel, Osman / Bayraktar, Oguzhan Yavuz / Kaplan, Gökhan / Benli, Ahmet / Martínez-Barrera, Gonzalo / Brostow, Witold / Tek, Murat / Bodur, Burak	Characteristics of hemp fibre reinforced foam concretes with fly ash and Taguchi optimization	123607
Saha, Indrashish / Vidya Sagar, R.	Classification of the acoustic emissions generated during the tensile fracture process in steel fibre reinforced concrete using a waveform-based clustering method	123541
Mazzucco, G. / Salomoni, V. A. / Majorana, C.	A cohesive contact algorithm to evaluate the mechanical behaviour of concrete ITZ at different roughness conditions	123479
Deng, Yongfeng / Xu, Chenchen / Marsheal, Fisonga / Geng, Xueyu / Chen, Yonggui / Sun, Honglei	Constituent effect on mechanical performance of crushed demolished construction waste/silt mixture	123567
Niu, Yanfei / Wei, Jiangxiong / Jiao, Chujie	Crack propagation behavior of ultra-high-performance concrete (UHPC) reinforced with hybrid steel fibers under flexural loading	123510
Zhang, Bei / Wang, Baolin / Zhong, Yanhui / Li, Xiaolong / Zhang, Yue / Li, Songtao	Damage characteristics and microstructures of low-exothermic polymer grouting materials under F–T cycles	123390
Wang, Liyan / Xiao, Xing / Ji, Wenwei / Ishimwe, Aimable / Wang, Binghui / Sun, Ke	Dynamic properties of the mucky clay improved with the steel slag and the rubber particles	123489
Qiu, Jisheng / Zhu, Mengyu / Zhou, Yunxian / Guan, Xiao	Effect and mechanism of coal gangue concrete modification by fly ash	123563
Hirsch, Tamino / Lu, Zichen / Stephan, Dietmar	Effect of different sulphate carriers on Portland cement hydration in the presence of triethanolamine	123528
Miri, Amin / Zakeri, Jabbar Ali / Thambiratnam, David / Chan, T. H. T.	Effect of shape of concrete sleepers for mitigating of track buckling	123568
Nguyen, Quang Tuan / Di Benedetto, Hervé / Phuc Nguyen, Quang / Hoang, Thi Thanh Nhan / Bui, Van Phu	Effect of time–temperature, strain level and cyclic loading on the complex Poisson’s ratio of asphalt mixtures	123564
Jia, Jun-Yu / Gu, Xiang-Lin	Effects of coarse aggregate surface morphology on aggregate-mortar interface strength and mechanical properties of concrete	123515
Sun, Jianwei / Zhang, Peng	Effects of different composite mineral admixtures on the early hydration and long-term properties of cement-based materials: A comparative study	123547
Ren, Jie / Sun, Hongfang / Cao, Kun / Ren, Zhili / Zhou, Bo / Wu, Wenshen / Xing, Feng	Effects of natural seawater mixing on the properties of alkali-activated slag binders	123601
Tao, Haotian / Yang, Huifeng / Ju, Gaoyan / Shi, Benkai	Elastic stiffness of timber joints with dowel-type fasteners and slotted-in steel plate based on the theory of beam on elastic foundation	123569
Han, Ding / Yuan, Miao / Hu, Huimin	Establishing prediction master curve of dynamic modulus of asphalt mixture considering randomness of aggregate morphology	123575
Suwanmaneechot, Piyapong / Bongkarn, Theerachai / Joyklad, Panuwat / Julphunthong, Phongthorn	Experimental and numerical evaluation of gamma-ray attenuation characteristics of concrete containing high-density materials	123614
Shen, Yuan-shun / Tang, Yong / Yin, Jie / Li, Mei-ping / Wen, Ting	An experimental investigation on strength characteristics of fiber-reinforced clayey soil treated with lime or cement	123537
Wang, Yanlei / Meng, Ziping / Zhu, Wanxin / Wan, Baolin / Han, Baoguo / Cai, Gaochuang / Yin, Xiushui / Bai, Yulei	Hygrothermal aging behavior and aging mechanism of carbon nanofibers/epoxy composites	123538
Chen, Gonglian / Li, Fenglan / Geng, Jingya / Jing, Pengfei / Si, Zhengkai	Identification, generation of autoclaved aerated concrete pore structure and simulation of its influence on thermal conductivity	123572
Liu, Suqin / Minne, Peter / Lulić, Minela / Li, Jiabin / Gruyaert, Elke	Implementation and validation of Dewar’s particle packing model for recycled concrete aggregates	123429
Xie, Hongfeng / Zhao, Ruikang / Wang, Rui / Xi, Zhonghua / Yuan, Zuanru / Zhang, Junsheng / Wang, Qingjun	Influence of thermal shock on the performance of B-staged epoxy bond coat for orthotropic steel bridge pavements	123598
Zhang, Yue / Xu, Qingqing / Sun, Ming / Xiong, Chuansheng / Wang, Pan / Chen, Zheng / Sun, Guoxing / Guan, Jing / Ding, Zhiheng / Li, Mengmeng / Hou, Dongshuai	Insights into vitamin B3, B6 and C as inhibitor of steel reinforcement: A DFT + U study	123571
Vola, Gabriele / Ardit, Matteo / Sarandrea, Luca / Brignoli, Gianfranco / Natali, Claudio / Cavallo, Alessandro / Bianchini, Gianluca / Cruciani, Giuseppe	Investigation and prediction of sticking tendency, blocks formation and occasional melting of lime at HT (1300 °C) by the overburning test method	123577
Akkaya, Ahmet / Çağatay, İsmail Hakkı	Investigation of the density, porosity, and permeability properties of pervious concrete with different methods	123539
Hu, Lingling / He, Zhen / Shao, Yixin / Cai, Xinhua / Zhang, Shipeng	Microstructure and properties of sustainable cement-based materials using combustion treated rice husk ash	123482
Moussa, Ghada S. / Owais, Mahmoud	Modeling Hot-Mix asphalt dynamic modulus using deep residual neural Networks: Parametric and sensitivity analysis study	123589
Wang, Binhua / Hu, Xiaozhi / Shao, Yuhong / Xu, Ouming / Lu, Pengmin / Li, Kaixuan	Modelling and testing of Temperature-Dependent strength and toughness of asphalt concrete from −10 °C to + 23 °C using small notched beams	123580
Lauch, K.-S. / Desmettre, C. / Charron, J.-P.	New water permeability set-up and factors affecting concrete self-healing	123595
Zhao, Gaowen / Guo, Mengzhen / Cui, Jifei / Li, Jingpei / Xu, Longfei	Partially-exposed cast-in-situ concrete degradation induced by internal-external sulfate and magnesium multiple coupled attack	123560
Praticò, Filippo G. / Fedele, Rosario / Pellicano, Gianfranco	Pavement FRFs and noise: A theoretical and experimental investigation	123487
Angiolilli, Michele / Gregori, Amedeo / Cattari, Serena	Performance of Fiber Reinforced Mortar coating for irregular stone masonry: Experimental and analytical investigations	123508
Wang, Hui / Jing, Yufei / Zhang, Jiupeng / Cao, Yuanbo / Lyu, Lei	Preparation and performance evaluation of swine manure bio-oil modified rubber asphalt binder	123584
Wang, Chaohui / Zhou, Xiaolei / Yuan, Huazhi / Chen, Haoyu / Zhou, Liwei / Fu, Yi	Preparation and performance of UHMWP modified asphalt and its high modulus mixture	123629
Meng, Yongjun / Zhao, Qixiong / Lei, Jiechao / Mao, Mingliang / Qin, Yue / Xi, Chenchen / Lu, Zubiao / Yang, Xiaolong / Rong, Hongliu	Preparation of biological antifreeze protein-modified emulsified asphalt coating and research on its anti-icing performance	123473
Debnath, Barnali / Sarkar, Partha Pratim	Quantification of random pore features of porous concrete mixes prepared with brick aggregate: An application of stereology and mathematical morphology	123594
Khmurovska, Yuliia / Štemberk, Petr	RBSM-based model for prediction of radiation-induced volumetric expansion of concrete aggregates	123553
Sun, Jiazheng / Zhou, Huan / Jiang, Haohao / Zhang, Wenyi / Mao, Linqiang	Recycling municipal solid waste incineration fly ash in fired bricks: An evaluation of physical-mechanical and environmental properties	123476
Costi de Castrillo, Maria / Ioannou, Ioannis / Philokyprou, Maria	Reproduction of traditional adobes using varying percentage contents of straw and sawdust	123516
Zhou, Yongxiang	Reusing electrolytic manganese residue as an activator: The effect of calcination on its mineralogy and activity	123533
Chen, Mingyuan / Geng, Jiuguang / Xia, Caiyun / He, Leilei / Liu, Zhuo	A review of phase structure of SBS modified asphalt: Affecting factors, analytical methods, phase models and improvements	123610
Sun, Yingfei / Zhang, Pan / Hu, Jingping / Liu, Bingchuan / Yang, Jiakuan / Liang, Sha / Xiao, Keke / Hou, Huijie	A review on microwave irradiation to the properties of geopolymers: Mechanisms and challenges	123491
Ahmed, Azzam / Zillur Rahman, Md / Ou, Yunfu / Liu, Sai / Mobasher, Barzin / Guo, Shuaicheng / Zhu, Deju	A review on the tensile behavior of fiber-reinforced polymer composites under varying strain rates and temperatures	123565
Zhang, Ruiyu / Yu, Xin / Yang, Qiwu / Cui, Gan / Li, Zili	The role of graphene in anti-corrosion coatings: A review	123613
Zhou, Zihan / Shen, Yanjun / Zhang, Huan / Wang, Yongzhi / Yang, Hongwei / Pan, Jia / Wei, Xin	Sandstone-concrete interface debonding mechanism under freeze-thaw actions: Fracture process and fracture criterion	123526
Long, Wu-Jian / Lin, Can / Ye, Tao-Hua / Dong, Biqin / Xing, Feng	Stabilization/solidification of hazardous lead glass by geopolymers	123574
Sun, Shengfei / Li, Peilong / Su, Jinfei / Ma, Yunfei / Wang, Xiao / Bi, Jiayu	Study on deformation behavior and prediction model of asphalt mixture based on interface-slip characteristics of aggregates	123581
Muhammad Zahid Hassan, Hafiz / Wu, Kuanghuai / Huang, Wenke / Chen, Sihang / Zhang, Qiran / Xie, Jiawen / Cai, Xu	Study on the influence of aggregate strength and shape on the performance of asphalt mixture	123599
Liu, Kangning / Wang, Sheliang / Quan, Xiaoyi / Duan, Wei / Nan, Zhao / Wei, Tao / Xu, Fan / Li, Binbin	Study on the mechanical properties and microstructure of fiber reinforced metakaolin-based recycled aggregate concrete	123554
Kanavaris, Fragkoulis / Ferreira, Cláudio / Sousa, Carlos / Azenha, Miguel	Thermo-chemo-hygro-mechanical simulation of the restrained shrinkage ring test for cement-based materials under distinct drying conditions	123600
Marchi, Luca / Pozza, Luca	Timber-concrete composite connections using GFRP notches fastened with self-tapping screws: Conceiving, numerical modelling and testing	123579
Boudache, Sonia / Roziere, Emmanuel / Loukili, Ahmed / Izoret, Laurent	Towards common specifications for low- and high-expansion cement-based materials exposed to external sulphate attacks	123586
Rashad, Alaa M. / Khafaga, Sherif A. / Gharieb, Mahmoud	Valorization of fly ash as an additive for electric arc furnace slag geopolymer cement	123570
Herrington, Philip R. / Wu, Jeremy P. / van den Kerkhof, Lia C. / Bagshaw, Stephen A.	Water diffusion in bitumen films	123530

Informations
sur cette fiche
IssueID
66175
Publié(e) le:
17.06.2022
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - août 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - août 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.