Construction and Building Materials - juillet 2022

Publié:	juillet 2022

Auteur(s)	Titre	Page(s)
Avadh, Kumar / Jiradilok, Punyawut / Bolander, John E. / Nagai, Kohei	3D mesoscale simulation of the influence of corrosion on loss of tension stiffening in reinforced concrete	127684
Orosa, P. / Orozco, G. / Carret, J. C. / Carter, A. / Pérez, I. / Pasandín, A. R.	Compactability and mechanical properties of cold recycled mixes prepared with different nominal maximum sizes of RAP	127689
Yuan, Qiang / Xie, Zonglin / Yao, Hao / Fan, Minghao / Huang, Tingjie	Comparative study on the early properties of cement modified with different ionic polyacrylamides	127671
Santhanam, Kotteeswaran / Ramadoss, Ravi	Conservation & restoration of historic mortars at Alamparai fort with valley conical arch, Tamilnadu, India	127619
Llana, Daniel F. / González-Alegre, Violeta / Portela, María / Iñiguez-González, Guillermo	Cross Laminated Timber (CLT) manufactured with European oak recovered from demolition: Structural properties and non-destructive evaluation	127635
Otieno Owino, Alex / Nahar, Najmun / Hossain, Zakaria / Tamaki, Noma	Dimensional influence of basalt fiber reinforcements on the consolidation behaviour of rice husk ash stabilized soils	127686
Franco-Luján, Víctor Alberto / Maldonado-García, Marco Antonio / Mendoza-Rangel, José Manuel / Montes-Garcia, Pedro	Effect of Cl−-induced corrosion on the mechanical properties of reinforcing steel embedded in ternary concretes containing FA and UtSCBA	127655
Liu, Huanqiang / Yang, Xueqing / Jiang, Linhua	Effect of combined cations on chloride diffusion behavior in concrete	127669
Xu, Zhuoyue / Zhang, Dawang / Li, Hui / Sun, Xuemei / Zhao, Kefei / Wang, Yueying	Effect of FA and GGBFS on compressive strength, rheology, and printing properties of cement-based 3D printing material	127685
Manalo, Allan / Alajarmeh, Omar / Ferdous, Wahid / Benmokrane, Brahim / Sorbello, Charles-Dean / Gerdes, Andreas	Effect of simulated hygrothermal environment on the flexural and interlaminar shear strength of particulate-filled epoxy-coated GFRP composites	127687
Zhang, Jinrui / Lv, Tong / Han, Qinghua / Zhu, Yu / Hou, Dongshuai / Dong, Biqin	Effects of fly ash on MgO-based shrinkage-compensating cement: Microstructure and properties	127648
Zhang, Pu / Hu, Junmin / Yu, Jixing / Weng, Yiwei / Zhang, Dong	Enhancing mechanical properties of engineering cementitious composite by defoamer	127670
Zhang, Jianwei / Wang, Xiaoju / Shi, Lei / Yin, Yue	Enzyme-induced carbonate precipitation (EICP) combined with lignin to solidify silt in the Yellow River flood area	127792
Kaladharan, Gopakumar / Rajabipour, Farshad	Evaluation and beneficiation of high sulfur and high alkali fly ashes for use as supplementary cementitious materials in concrete	127672
Degl'Innocenti, Marco / Nocetti, Michela / Kovacevic, Vladimir Cerisano / Aminti, Giovanni / Betti, Michele / Lauriola, Marco Pio / Brunetti, Michele	Evaluation of the mechanical contribution of wood degraded by insects in old timber beams through analytical calculations and experimental tests	127653
Li, Ping / Li, Shan / Zhu, Weijun / Lu, Yiyan	Experimental research on the mechanical properties of steel fiber recycled aggregate concrete subjected to true triaxial compression	127579
Marín-Uribe, Carlos Rodolfo / Restrepo-Tamayo, Luz Marcela	Experimental study of the tensile strength of hot asphalt mixtures measured with indirect tensile and semi-circular bending tests	127651
Sayahi, Faez / Emborg, Mats / Hedlund, Hans / Ghasemi, Yahya	Experimental validation of a novel method for estimating the severity of plastic shrinkage cracking in concrete	127794
Lu, Jianguo / Liu, Junni / Yang, Huohai / Gao, Jiajia / Wan, Xusheng / Zhang, Jiacheng	Influence of curing temperatures on the performances of fiber-reinforced concrete	127640
Mezza, S. / Vázquez, P. / Ben M'barek Jemai, M. / Fronteau, G.	Infrared thermography for the investigation of physical–chemical properties and thermal durability of Tunisian limestone rocks	127470
Adel, Mohamed / Matsumoto, Koji / Ueda, Tamon / Nagai, Kohei	Material comparative analysis of crack-bridging degradation of SFRC structural beams under flexural fatigue loading	127642
Aslani, Farhad / Dale, Ryan / Hamidi, Fatemeh / Valizadeh, Afsaneh	Mechanical and shrinkage performance of 3D-printed rubberised engineered cementitious composites	127665
Wei, Yang / Chen, Si / Tang, Shuaifeng / Zheng, Kaiqi / Wang, Jiaqing	Mechanical behavior of bamboo composite tubes under axial compression	127681
Aeshah, Mohammed Najı Ahmed Abu / Kaplan, Gökhan	Mechanical durability and microstructural properties of sustainable high strength mortars ıncorporated basalt fiber and copper slag: Taguchi optimization	127815
Xu, Gaoxiang / Zhang, Xiangyu / Qing, Qiang / Gong, Jinghai	A nonlinear constitutive model of rigid polyurethane foam considering direction-dependence and tension–compression asymmetry	127540
Biricik, Öznur / Mardani, Ali	Parameters affecting thixotropic behavior of self compacting concrete and 3D printable concrete; a state-of-the-art review	127688
Ren, Zhenhua / Sun, Junbo / Zeng, Xiantao / Chen, Xi / Wang, Yufei / Tang, Weichen / Wang, Xiangyu	Research on the electrical conductivity and mechanical properties of copper slag multiphase nano-modified electrically conductive cementitious composite	127650
Wu, Li-Shan / Yu, Zhi-Hui / Zhang, Cong / Yuan, Zhen / Bangi, Toshiyuki	Shrinkage and tensile properties of ultra-high-performance engineered cementitious composites (UHP-ECC) containing superabsorbent polymers (SAP) and united expansion agent (UEA)	127697
Abdullah, Mohammed Jalal / Beddu, Salmia / Manan, Teh Sabariah Binti Abd / Syamsir, Agusril / Naganathan, Sivakumar / Mohd Kamal, Nur Liyana / Mohamad, Daud / Itam, Zarina / Yee+, Hooi Min / Mohd Yapandi, Md Fauzan Kamal / Nazri, Fadzli Mohamed / Shafiq, Nasir / Isa, Mohamed Hasnain / Ahmad, Amirrudin / Wan Rasdi, Nadiah	The Strength and Thermal Properties of Concrete containing Water Absorptive Aggregate from Well-Graded Bottom Ash (BA) as Partial Sand Replacement	127658
Hu, Mingjun / Ling, Senlin / Sun, Daquan / Lu, Tong / Ma, Jianmin / Sun, Yu	A sustainable high-viscosity modified asphalt modified with multiple anti-aging agents: Micro-chemical analysis and macro-rheological characterization	127701
Zhang, Sulei / Qi, Xiaoqiang / Guo, Siyao / Zhang, Li / Ren, Jie	A systematic research on foamed concrete: The effects of foam content, fly ash, slag, silica fume and water-to-binder ratio	127683

Auteur(s)

Titre

Page(s)

Avadh, Kumar / Jiradilok, Punyawut / Bolander, John E. / Nagai, Kohei

3D mesoscale simulation of the influence of corrosion on loss of tension stiffening in reinforced concrete

127684

Orosa, P. / Orozco, G. / Carret, J. C. / Carter, A. / Pérez, I. / Pasandín, A. R.

Compactability and mechanical properties of cold recycled mixes prepared with different nominal maximum sizes of RAP

127689

Yuan, Qiang / Xie, Zonglin / Yao, Hao / Fan, Minghao / Huang, Tingjie

Comparative study on the early properties of cement modified with different ionic polyacrylamides

127671

Santhanam, Kotteeswaran / Ramadoss, Ravi

Conservation & restoration of historic mortars at Alamparai fort with valley conical arch, Tamilnadu, India

127619

Llana, Daniel F. / González-Alegre, Violeta / Portela, María / Iñiguez-González, Guillermo

Cross Laminated Timber (CLT) manufactured with European oak recovered from demolition: Structural properties and non-destructive evaluation

127635

Otieno Owino, Alex / Nahar, Najmun / Hossain, Zakaria / Tamaki, Noma

Dimensional influence of basalt fiber reinforcements on the consolidation behaviour of rice husk ash stabilized soils

127686

Franco-Luján, Víctor Alberto / Maldonado-García, Marco Antonio / Mendoza-Rangel, José Manuel / Montes-Garcia, Pedro

Effect of Cl−-induced corrosion on the mechanical properties of reinforcing steel embedded in ternary concretes containing FA and UtSCBA

127655

Liu, Huanqiang / Yang, Xueqing / Jiang, Linhua

Effect of combined cations on chloride diffusion behavior in concrete

127669

Xu, Zhuoyue / Zhang, Dawang / Li, Hui / Sun, Xuemei / Zhao, Kefei / Wang, Yueying

Effect of FA and GGBFS on compressive strength, rheology, and printing properties of cement-based 3D printing material

127685

Manalo, Allan / Alajarmeh, Omar / Ferdous, Wahid / Benmokrane, Brahim / Sorbello, Charles-Dean / Gerdes, Andreas

Effect of simulated hygrothermal environment on the flexural and interlaminar shear strength of particulate-filled epoxy-coated GFRP composites

127687

Zhang, Jinrui / Lv, Tong / Han, Qinghua / Zhu, Yu / Hou, Dongshuai / Dong, Biqin

Effects of fly ash on MgO-based shrinkage-compensating cement: Microstructure and properties

127648

Zhang, Pu / Hu, Junmin / Yu, Jixing / Weng, Yiwei / Zhang, Dong

Enhancing mechanical properties of engineering cementitious composite by defoamer

127670

Zhang, Jianwei / Wang, Xiaoju / Shi, Lei / Yin, Yue

Enzyme-induced carbonate precipitation (EICP) combined with lignin to solidify silt in the Yellow River flood area

127792

Kaladharan, Gopakumar / Rajabipour, Farshad

Evaluation and beneficiation of high sulfur and high alkali fly ashes for use as supplementary cementitious materials in concrete

127672

Degl'Innocenti, Marco / Nocetti, Michela / Kovacevic, Vladimir Cerisano / Aminti, Giovanni / Betti, Michele / Lauriola, Marco Pio / Brunetti, Michele

Evaluation of the mechanical contribution of wood degraded by insects in old timber beams through analytical calculations and experimental tests

127653

Li, Ping / Li, Shan / Zhu, Weijun / Lu, Yiyan

Experimental research on the mechanical properties of steel fiber recycled aggregate concrete subjected to true triaxial compression

127579

Marín-Uribe, Carlos Rodolfo / Restrepo-Tamayo, Luz Marcela

Experimental study of the tensile strength of hot asphalt mixtures measured with indirect tensile and semi-circular bending tests

127651

Sayahi, Faez / Emborg, Mats / Hedlund, Hans / Ghasemi, Yahya

Experimental validation of a novel method for estimating the severity of plastic shrinkage cracking in concrete

127794

Lu, Jianguo / Liu, Junni / Yang, Huohai / Gao, Jiajia / Wan, Xusheng / Zhang, Jiacheng

Influence of curing temperatures on the performances of fiber-reinforced concrete

127640

Mezza, S. / Vázquez, P. / Ben M'barek Jemai, M. / Fronteau, G.

Infrared thermography for the investigation of physical–chemical properties and thermal durability of Tunisian limestone rocks

127470

Adel, Mohamed / Matsumoto, Koji / Ueda, Tamon / Nagai, Kohei

Material comparative analysis of crack-bridging degradation of SFRC structural beams under flexural fatigue loading

127642

Aslani, Farhad / Dale, Ryan / Hamidi, Fatemeh / Valizadeh, Afsaneh

Mechanical and shrinkage performance of 3D-printed rubberised engineered cementitious composites

127665

Wei, Yang / Chen, Si / Tang, Shuaifeng / Zheng, Kaiqi / Wang, Jiaqing

Mechanical behavior of bamboo composite tubes under axial compression

127681

Aeshah, Mohammed Najı Ahmed Abu / Kaplan, Gökhan

Mechanical durability and microstructural properties of sustainable high strength mortars ıncorporated basalt fiber and copper slag: Taguchi optimization

127815

Xu, Gaoxiang / Zhang, Xiangyu / Qing, Qiang / Gong, Jinghai

A nonlinear constitutive model of rigid polyurethane foam considering direction-dependence and tension–compression asymmetry

127540

Biricik, Öznur / Mardani, Ali

Parameters affecting thixotropic behavior of self compacting concrete and 3D printable concrete; a state-of-the-art review

127688

Ren, Zhenhua / Sun, Junbo / Zeng, Xiantao / Chen, Xi / Wang, Yufei / Tang, Weichen / Wang, Xiangyu

Research on the electrical conductivity and mechanical properties of copper slag multiphase nano-modified electrically conductive cementitious composite

127650

Wu, Li-Shan / Yu, Zhi-Hui / Zhang, Cong / Yuan, Zhen / Bangi, Toshiyuki

Shrinkage and tensile properties of ultra-high-performance engineered cementitious composites (UHP-ECC) containing superabsorbent polymers (SAP) and united expansion agent (UEA)

127697

Abdullah, Mohammed Jalal / Beddu, Salmia / Manan, Teh Sabariah Binti Abd / Syamsir, Agusril / Naganathan, Sivakumar / Mohd Kamal, Nur Liyana / Mohamad, Daud / Itam, Zarina / Yee+, Hooi Min / Mohd Yapandi, Md Fauzan Kamal / Nazri, Fadzli Mohamed / Shafiq, Nasir / Isa, Mohamed Hasnain / Ahmad, Amirrudin / Wan Rasdi, Nadiah

The Strength and Thermal Properties of Concrete containing Water Absorptive Aggregate from Well-Graded Bottom Ash (BA) as Partial Sand Replacement

127658

Hu, Mingjun / Ling, Senlin / Sun, Daquan / Lu, Tong / Ma, Jianmin / Sun, Yu

A sustainable high-viscosity modified asphalt modified with multiple anti-aging agents: Micro-chemical analysis and macro-rheological characterization

127701

Zhang, Sulei / Qi, Xiaoqiang / Guo, Siyao / Zhang, Li / Ren, Jie

A systematic research on foamed concrete: The effects of foam content, fly ash, slag, silica fume and water-to-binder ratio

127683

Publicité

Construction and Building Materials - juillet 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - juillet 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.