Construction and Building Materials - septembre 2021

Publié:	septembre 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Chi, Yin / Huang, Bo / Saafi, Mohamed / Fullwood, Nigel / Lambert, Colin / Whale, Eric / Hepworth, David / Ye, Jianqiao	2D bio-based nanomaterial as a green route to amplify the formation of hydrate phases of cement composites: Atomistic simulations and analytical characterization	123867
Suo, Zhi / Yan, Qiang / Ji, Jie / Liu, Xiaoyu / Chen, Huan / Zhang, Ao	The aging behavior of reclaimed asphalt mixture with vegetable oil rejuvenators	123811
Geng, Jiuguang / Chen, Mingyuan / Xia, Caiyun / Liao, Xiaofeng / Chen, Zhongda / Chen, Huaxin	Aging characteristics of crumb rubber modified asphalt binder and mixture with regenerating agent	124299
Masi, Giulia / Sassoni, Enrico	Air lime mortar consolidation by nanolimes and ammonium phosphate: Compatibility, effectiveness and durability	123999
Li, Xiaodong / Wang, Qing / Lei, Lulu / Shi, Zengqin / Zhang, Mingya	Amphiphobic concrete with good oil stain resistance and anti-corrosion properties used in marine environment	123945
Han, Chengjia / Ma, Tao / Chen, Siyu	Asphalt pavement maintenance plans intelligent decision model based on reinforcement learning algorithm	124278
Du, Yansheng / Zhang, Yutong / Chen, Zhihua / Yan, Jia-Bao / Zheng, Zihan	Axial compressive performance of CFRP confined rectangular CFST columns using high-strength materials with moderate slenderness	123912
Yang, Junlong / Wang, Jizhong / Wang, Ziru	Behavior and modeling of CFRP nonuniformly wrapped circular seawater sea-sand concrete (SSC) columns under axial compression	123887
Wang, Xinyue / Dong, Sufen / Ashour, Ashraf / Ding, Siqi / Han, Baoguo	Bond behaviors between nano-engineered concrete and steel bars	124261
Liu, Yue / Zhuge, Yan / Chow, Christopher W. K. / Keegan, Alexandra / Ma, Jun / Hall, Colin / Li, Danda / Pham, Phuong Ngoc / Huang, Jianyin / Duan, Weiwei / Wang, Lei	Cementitious composites containing alum sludge ash: An investigation of microstructural features by an advanced nanoindentation technology	124286
Li, Guo / Ding, Yi / Gao, Tianyu / Qin, Yiming / Lv, Yajun / Wang, Kejin	Chloride resistance of concrete containing nanoparticle-modified polymer cementitious coatings	123736
Zhao, Yasong / Gao, Jianming / Xu, Zhenhai / Li, Shujun / Luo, Xu / Chen, Gaofeng	Combined effect of slag and clay brick powder on the hydration of blended cement	123996
Wang, Yanlei / Liu, Pu / Cao, Qi / Chen, Guipeng / Wan, Baolin / Wei, Zitao / Bai, Yu-Lei	Comparison of monotonic axial compressive behavior of rectangular concrete confined by FRP with different rupture strains	124241
Althoey, Fadi	Compressive strength reduction of cement pastes exposed to sodium chloride solutions: Secondary ettringite formation	123965
Zhang, Bai / Zhu, Hong / Li, Fangzheng / Dong, Zhiqiang / Zhang, Pu	Compressive stress-strain behavior of seawater coral aggregate concrete incorporating eco-efficient alkali-activated slag materials	123886
Maia Neto, F. M. / Andrade, T. W. C. O. / Gomes, R. M. / Leal, A. F. / Almeida, A. N. F. / Lima Filho, M. R. F. / Torres, S. M.	Considerations on the effect of temperature, cation type and molarity on silica degradation and implications to ASR assessment	123848
Rahimzadeh Oskooei, Parisa / Mohammadinia, Alireza / Arulrajah, Arul / Horpibulsuk, Suksun / Emam, Sacha	Crushing behavior of recycled waste materials: Experimental analysis and DEM simulation	124226
Xia, Qian / Sun, Yuanqing / Li, Yanjun / Pang, Lei / Yang, Yiwei	Development law of axial compression and cracks in ancient brick masonry	123936
Hao, Xiaolong / Sun, Jin / Chen, Chuanfu / Zhou, Haiyang / Li, Yuyu / Li, Wenjuan / Wang, Qingwen / Ou, Rongxian	Dimensional stability improvements of waste wood flour/HDPE composites via carbon black network embedding	123955
Ramezanianpour, A. A. / Pourkhorshidi, A. R. / Sobhani, J. / Moodi, F.	Durability of concrete containing blended cements in harsh marine environments: 18 years exposure study	123863
Yu, Yixun / Liu, Shuai / Pan, Yunfeng / Miu, Xinbo / Liu, Jintao	Durability of glass fiber-reinforced polymer bars in water and simulated concrete pore solution	123995
Lyu, Lei / Pei, Jianzhong / Hu, Dongliang / Fini, Elham H.	Durability of rubberized asphalt binders containing waste cooking oil under thermal and ultraviolet aging	124282
Yi, Yong / Guo, Shuaicheng / Li, Sheng / Zillur Rahman, Md / Zhou, Linlin / Shi, Caijun / Zhu, Deju	Effect of alkalinity on the shear performance degradation of basalt fiber-reinforced polymer bars in simulated seawater sea sand concrete environment	123957
Dybeł, Piotr	Effect of bottom-up placing of self-compacting concrete on microstructure of rebar-concrete interface	124359
Guo, Jinjun / Zhang, Shiwei / Qi, Cuige / Cheng, Lin / Yang, Lin	Effect of calcium sulfoaluminate and MgO expansive agent on the mechanical strength and crack resistance of concrete	123833
Srivaro, Suthon / Lim, Hyungsuk / Li, Minghao / Jantawee, Sataporn / Tomad, Jaipet	Effect of compression ratio and original wood density on pressing characteristics and physical and mechanical properties of thermally compressed coconut wood	124272
Farokhzad, Reza / Dadashi, Amir / Sohrabi, Ashkan	The effect of ferrophosphorus aggregate on physical and mechanical properties of heavy-weight concrete	123915
Kong, Fanmeng / Xue, Yiguo / Qiu, Daohong / Gong, Huimin / Ning, Zexu	Effect of grain size or anisotropy on the correlation between uniaxial compressive strength and Schmidt hammer test for building stones	123941
Afzali-Naniz, Oveys / Mazloom, Moosa / Karamloo, Mohammad	Effect of nano and micro SiO2 on brittleness and fracture parameters of self-compacting lightweight concrete	124354
Malaiškienė, J. / Costa, C. / Baneviciene, V. / Antonovič, V. / Vaičienė, M.	The effect of nano SiO2 and spent fluid catalytic cracking catalyst on cement hydration and physical mechanical properties	124281
Revilla-Cuesta, Víctor / Evangelista, Luís / de Brito, Jorge / Ortega-López, Vanesa / Manso, Juan M.	Effect of the maturity of recycled aggregates on the mechanical properties and autogenous and drying shrinkage of high-performance concrete	124001
Elaqra, Hossam A. / Elmasry, Ibrahim H. / Tabasi, Ahmed M. / Alwan, Mohammed D. / Shamia, Hisham N. / Elnashar, Mostapha I.	Effect of water-to-cement ratio and soaking time of waste glass powder on the behaviour of green concrete	124285
Damineli, Bruno L. / Pileggi, Rafael G. / Lagerblad, Björn / John, Vanderley M.	Effects of filler mineralogy on the compressive strength of cementitious mortars	124363
Li, Maosen / Liu, Huai / Duan, Ping / Ruan, Shaoqin / Zhang, Zuhua / Ge, Wen	The effects of lithium slag on microstructure and mechanical performance of metakaolin-based geopolymers designed by response surface method (RSM)	123950
Cui, Xuhao / Zhou, Rui / Guo, Gaoran / Du, Bowen / Liu, Hanlin	Effects of train load and water on stress intensity factors of the crack in slab track	124247
Rao, Wenhao / Liu, Quantao / Yu, Xin / Wan, Pei / Wang, Huan / Song, Jiangkai / Ye, Qunshan	Efficient preparation and characterization of calcium alginate-attapulgite composite capsules for asphalt self-healing	123931
Wittinanon, Thanyapon / Rianyoi, Rattiyakorn / Chaipanich, Arnon	Electromechanical properties of barium titanate-polyvinylidene fluoride cement-based composites	123908
Anupam, B. R. / Sahoo, Umesh Chandra / Chandrappa, Anush K. / Rath, Prasenjit	Emerging technologies in cool pavements: A review	123892
Amin, Mohamed / Zeyad, Abdullah M. / Tayeh, Bassam A. / Agwa, Ibrahim Saad	Engineering properties of self-cured normal and high strength concrete produced using polyethylene glycol and porous ceramic waste as coarse aggregate	124243
Liu, Songhui / Zhang, Li / Xuan, Dongxing / Shen, Peiliang / Zhu, Jianping / Guan, Xuemao / Shi, Caijun	Enhanced carbonation reactivity of wollastonite by rapid cooling process: Towards an ultra-low calcium CO2 sequestration binder	124336
Deng, Yue / Ma, Jianmin / Lu, Tong / Sun, Daquan	Enhanced heating-healing performance of asphalt concrete modified with heterogenous microwave sensitive admixtures	123949
Lv, Yang / Wu, Shaopeng / Cui, Peide / Liu, Quantao / Li, Yuanyuan / Xu, Haiqin / Zhao, Yuechao	Environmental and feasible analysis of recycling steel slag as aggregate treated by silicone resin	123914
Rodríguez-Mariscal, J. D. / Canivell, J. / Solís, M.	Evaluating the performance of sonic and ultrasonic tests for the inspection of rammed earth constructions	123854
Barreto Santos, Miguel / de Brito, Jorge / Silva, António Santos / Hawreen, A.	Evaluation of alkali-silica reaction in recycled aggregates: The applicability of the mortar bar test	124250
Fakoor, Maziar / Nematzadeh, Mahdi	Evaluation of post-fire pull-out behavior of steel rebars in high-strength concrete containing waste PET and steel fibers: Experimental and theoretical study	123917
Kucíková, Lucie / Janda, Tomáš / Sýkora, Jan / Šejnoha, Michal / Marseglia, Guido	Experimental and numerical investigation of the response of GLT beams exposed to fire	123846
Villalba Sanchís, Ignacio / Insa Franco, Ricardo / Martínez Fernández, Pablo / Salvador Zuriaga, Pablo	Experimental and numerical investigations of dual gauge railway track behaviour	123943
Ibeh, Christopher U. / Tarantino, Alessandro / Pedrotti, Matteo / Lunn, Rebecca J.	An experimental investigation into the use of mica as a material for the stabilisation of marginal clays in construction	123971
Junwei, Zhang / Shijie, Li / Hongjian, Peng	Experimental investigation of multiscale hybrid fibres on the mechanical properties of high-performance concrete	123895
Song, Jiangliang / Wang, Wei / Su, Sanqing / Wang, Bingjie / Li, Yu / Lu, Zheng	Experimental investigation of the bond-slip behaviour between corrugated steel plates and concrete in CSRC structures	124315
Yang, Zhihan / Xie, Youjun / He, Jionghuang / Zeng, Xiaohui / Ma, Kunlin / Long, Guangcheng	Experimental investigation on mechanical strength and microstructure of cement paste by electric curing with different voltage and frequency	123615
Fataar, H. / Combrinck, R. / Boshoff, W. P.	An experimental study on the fatigue failure of steel fibre reinforced concrete at a single fibre level	123869
He, Minjuan / Sun, Xiaofeng / Ren, Haiqing / Li, Zheng / Feng, Wei	Experimental study on the system effect of bending cross-laminated timber fabricated with Karamatsu larch	124271
Wi, Seunghwan / Yang, Sungwoong / Yun, Beom Yeol / Kim, Sumin	Exterior insulation finishing system using cementitious plaster/microencapsulated phase change material for improving the building thermal storage performance	123932
Andreev, K. / Yin, Y. / Luchini, B. / Sabirov, I.	Failure of refractory masonry material under monotonic and cyclic loading – Crack propagation analysis	124203
Yang, Man / Fang, Hongyuan / Wang, Fuming / Wang, Yuke / Du, Xueming / Lei, Jianwei	First-order symplectic Euler method for ground penetrating radar forward simulations in dispersive medium	123904
Wu, Weiwei / He, Xiongjun / Wu, Chao / He, Jia / Yang, Wenrui	Fracture performance of GFRP-RC beams with working cracks in alkaline environment for eight years	123757
Castori, Giulio / Corradi, Marco / Sperazini, Emanuela	Full size testing and detailed micro-modeling of the in-plane behavior of FRCM–reinforced masonry	124276
Solanki, Aarti / Singh, L. P. / Karade, S. R. / Sharma, U.	Functionality of silica nanoparticles on hydration mechanism and microstructure of tricalcium aluminate	124238
Nawar, Mahmoud / Salim, Hani / Newberry, Michael / El-Sisi, Alaa	High strain rate response of laminated glass interlayer materials	123934
Perumal, Priyadharshini / Sreenivasan, Harisankar / Luukkonen, Tero / Kantola, Anu M. / Telkki, Ville-Veikko / Kinnunen, Paivo / Illikainen, Mirja	High strength one-part alkali-activated slag blends designed by particle packing optimization	124004
Lv, Songtao / Ma, Wenbo / Zhao, Zenggang / Guo, Shuaicheng	Improvement on the high-temperature stability and anti-aging performance of the rubberized asphalt binder with the Lucobit additive	124304
Athira, V. S. / Bahurudeen, A. / Saljas, M. / Jayachandran, K.	Influence of different curing methods on mechanical and durability properties of alkali activated binders	123963
Liang, Hehao / Shi, Liwan / Wang, Duanyi / Xiao, Xin / Deng, Kailing	Influence of graded coarse aggregate content and specific surface area on the fracture properties of asphalt mixtures based on discrete element simulations and indoor tests	123942
Marchione, Francesco / Munafò, Placido	Influence of high temperature exposure on the mechanical performance of double-lap adhesive joints between glass and aluminium adherends	124268
Li, Jiajian / Yilmaz, Erol / Cao, Shuai	Influence of industrial solid waste as filling material on mechanical and microstructural characteristics of cementitious backfills	124288
Wang, Zhongzhen / Zou, Dujian / Liu, Tiejun / Zhou, Ao	Influence of paste coating thickness on the compressive strength, permeability, and mesostructure of permeable concrete	123994
Andrade Neto, José S. / Bersch, Jéssica D. / Silva, Thaís S. M. / Rodríguez, Erich D. / Suzuki, Seiiti / Kirchheim, Ana Paula	Influence of phosphogypsum purification with lime on the properties of cementitious matrices with and without plasticizer	123935
Yang, Haitao / Liu, Juanhong / Wu, Lipeng / Wang, Wei	Influence of reswollen superabsorbent polymers on the corrosion behavior of steel fibers in cracked mortars exposed to NaCl solutions	124283
Feng, Jiahui / Hu, Zebin / Jiang, Haibo / Hu, Jiahao / Qiu, Yitao	Influence of RPC grouting materials on shear behavior of wet joints in PCSBs with confining stress	123993
González-Fonteboa, Belén / González-Taboada, Iris / Carro-López, Diego / Martínez-Abella, Fernando	Influence of the mixing procedure on the fresh state behaviour of recycled mortars	124266
Ren, Juanjuan / Ye, Wenlong / Deng, Shijie / Du, Wei / Zhang, Kaiyao	Influence of the strain rate on the dynamic damage of cement-asphalt mortar in prefabricated slab tracks	123944
Huo, Jinyang / Wang, Zhenjun / Zhang, Tonghuan / He, Rui / Chen, Huaxin	Influences of interaction between cement and ionic paraffin emulsion on cement hydration	123951
Duriot, Robin / Rescalvo, Francisco J. / Pot, Guillaume / Denaud, Louis / Girardon, Stéphane / Frayssinhes, Remy	An insight into mechanical properties of heartwood and sapwood of large French Douglas-fir LVL	123859
Zhan, Yulin / Sun, Yuehan / Huang, Wei / Deng, Kailai / Sun, Jiangbo	Interfacial behavior of segmental concrete-filled Basalt FRP tube under compression	123979
Ponce-Antón, Graciela / Arizzi, Anna / Cultrone, Giuseppe / Zuluaga, Maria Cruz / Ortega, Luis Angel / Mauleon, Juantxo Agirre	Investigating the manufacturing technology and durability of lime mortars from Amaiur Castle (Navarre, Spain): A chemical–mineralogical and physical study	123975
Wang, Yuxuan / Liu, Quansheng	Investigation on fundamental properties and chemical characterization of water-soluble epoxy resin modified cement grout	123877
Wang, Licheng / Zhang, Qiuyu	Investigation on water absorption in concrete after subjected to compressive fatigue loading	123897
Liu, Jin-Cheng / Huang, Le / Tian, Zushi / Ye, Hailong	Knowledge-enhanced data-driven models for quantifying the effectiveness of PP fibers in spalling prevention of ultra-high performance concrete	123946
Pokorný, Jaroslav / Ševčík, Radek / Šál, Jiří / Zárybnická, Lucie	Lightweight blended building waste in the production of innovative cement-based composites for sustainable construction	123933
Lombardi, Federico / Lualdi, Maurizio / Garavaglia, Elsa	Masonry texture reconstruction for building seismic assessment: Practical evaluation and potentials of Ground Penetrating Radar methodology	124189
Pu, ShaoYun / Zhu, Zhiduo / Song, Weilong / Huo, Wangwen / Zhang, Jie	Mechanical and microscopic properties of fly ash phosphoric acid-based geopolymer paste: A comprehensive study	123947
Zhao, Haitao / Xiang, Yu / Chen, Xiaodong / Huang, Jie / Xu, Wen / Li, Hua / Wang, Yujiang / Wang, Penggang	Mechanical properties and volumetric deformation of early-age concrete containing CaO-MgO blended expansive agent and temperature rising inhibitor	123977
Ruengsillapanun, Kitipong / Udtaranakron, Thippakorn / Pulngern, Tawich / Tangchirapat, Weerachart / Jaturapitakkul, Chai	Mechanical properties, shrinkage, and heat evolution of alkali activated fly ash concrete	123954
Li, Tianzhen / Fan, Yongli / Wang, Kaiyi / Song, Shaolei / Liu, Xiaomeng / Bu, Naijing / Li, Rong / Zhen, Qiang / Bashir, Sajid	Methyl-modified silica hybrid fluorinated Paraloid B-72 as hydrophobic coatings for the conservation of ancient bricks	123906
Chiniforush, Alireza A. / Gharehchaei, Maryam / Nezhad, Ali Akbar / Castel, Arnaud / Moghaddam, Farzad / Keyte, Louise / Hocking, David / Foster, Stephen	Minimising risk of early-age thermal cracking and delayed ettringite formation in concrete – A hybrid numerical simulation and genetic algorithm mix optimisation approach	124280
Tu, Yongming / Yu, Qian / Wen, Rongjia / Shi, Pan / Yuan, Lei / Ji, Yuanhui / Sas, Gabriel / Elfgren, Lennart	Molecular dynamics simulation of coupled water and ion adsorption in the nano-pores of a realistic calcium-silicate-hydrate gel	123961
Cui, Lingrui / Xu, Jun / Cen, Lian / Ren, Mannian / Cao, Fahai	Molecular engineering and modification of FCC slurry oil residue for improving ageing resistance of high quality paving asphalt	124234
Fu, Jianhua / Li, Xuelong / Wang, Zhiming	A novel sealing material and a bag-grouting sealing method for underground CBM drainage in China	124016
Hosseini, Alireza Sadat / Hajikarimi, Pouria / Gandomi, Mostafa / Nejad, Fereidoon Moghadas / Gandomi, Amir H.	Optimized machine learning approaches for the prediction of viscoelastic behavior of modified asphalt binders	124264
Jiang, Huangbin / Qiu, Xiang	Performance assessment of a newly developed and highly stable grouting material for a completely weathered granite dam foundation	123956
Ren, Jun / Wang, Xianfeng / Li, Dongfeng / Xu, Shengye / Dong, Biqin / Xing, Feng	Performance of temperature adaptive microcapsules in self-healing cementitious materials under different mixing temperatures	124254
Liu, Weizhen / Guo, Zhongping / Wang, Chao / Niu, Shiwei	Physico-mechanical and microstructure properties of cemented coal Gangue-Fly ash backfill: Effects of curing temperature	124011
Zhang, Xijun / Du, Mingrui / Fang, Hongyuan / Shi, Mingsheng / Zhang, Chao / Wang, Fuming	Polymer-modified cement mortars: Their enhanced properties, applications, prospects, and challenges	124290
Cheng, Shukai / Ge, Keyu / Sun, Tao / Shui, Zhonghe / Chen, Xuyong / Lu, Jian-xin	Pozzolanic activity of mechanochemically and thermally activated coal-series kaolin in cement-based materials	123972
Lu, Jue / Jiang, Jun / Lu, Zhongyuan / Li, Jun / Shi, Youan	Preparation and properties of nanopore-rich cement-based porous materials based on colloidal silica sol	123966
Nasiru, Salifu / Jiang, Linhua / Yu, Lin / Chu, Hongqiang / Huang, Yu / Pei, Chun / Gu, Yue / Jin, Weizhun / Eyram Klu, Edwin / Guo, Ming-Zhi	Properties of cement mortar containing recycled glass and rice husk ash	123900
Hasnat, Ariful / Ghafoori, Nader	Properties of ultra-high performance concrete using optimization of traditional aggregates and pozzolans	123907
Yao, Hao / Xie, Zonglin / Huang, Chuhan / Yuan, Qiang / Yu, Zhiwu	Recent progress of hydrophobic cement-based materials: Preparation, characterization and properties	124255
Ince, Ceren / Tayançlı, Seval / Derogar, Shahram	Recycling waste wood in cement mortars towards the regeneration of sustainable environment	123891
Kang, Shinhyu / Lloyd, Zane / Behravan, Amir / Ley, M. Tyler	The relationship between the apparent diffusion coefficient and surface electrical resistivity of fly ash concrete	123964
Wu, Wangjie / Jiang, Wei / Yuan, Dongdong / Lu, Rong / Shan, Jinhuan / Xiao, Jingjing / Ogbon, Aboudou Wassiou	A review of asphalt-filler interaction: Mechanisms, evaluation methods, and influencing factors	124279
Chen, Weiwei / Xie, Yu / Li, Binxu / Li, Bo / Wang, Juan / Thom, Nicholas	Role of aggregate and fibre in strength and drying shrinkage of alkali-activated slag mortar	124002
Wang, R. / Shi, J. J. / Xia, M. K. / Li, Z.	Rolling shear performance of cross-laminated bamboo-balsa timber panels	123973
Saretta, Ylenia / Sbrogiò, Luca / Valluzzi, Maria Rosa	Seismic response of masonry buildings in historical centres struck by the 2016 Central Italy earthquake. Calibration of a vulnerability model for strengthened conditions	123911
Ftatsi Mbetmi, Guy-de-patience / Multon, Stéphane / de Larrard, Thomas / Duprat, Frédéric / Tieudjo, Daniel	Sensitivity of an alkali-silica reaction kinetics model to diffusion and reactive mechanisms parameters	123913
Yang, Yongmin / Chen, Zheng / Feng, Wanhui / Nong, Yumei / Yao, Minhui / Tang, Yunchao	Shrinkage compensation design and mechanism of geopolymer pastes	123916
Chen, Bi / Deng, Min / Huang, Xiaojun / Mo, Liwu / Huang, Bei / Lan, Xianghui	Siliceous and dolomitic-bearing aggregates reaction in Tetramethylammonium hydroxide	123948
Dai, Shuo / Zhu, Huajun / Zhai, Munan / Wu, Qisheng / Yin, Zhifeng / Qian, Hao / Hua, Sudong	Stability of steel slag as fine aggregate and its application in 3D printing materials	123938
Wang, Zhenjun / Liang, Qingyun / Yan, Fengfeng / Bian, Guan	Strength improvement of cement emulsified asphalt mixture through aggregate gradation design	124018
Hernando, David / Smith, Richard / Sholar, Greg / Choubane, Bouzid	Study of the field hydraulic conductivity of thin open-graded friction courses	124236
Liu, Songhui / Shen, Yuanyuan / Wang, Yuli / He, Hang / Luo, Shuqiong / Huang, Cunhan	Synergistic use of sodium bicarbonate and aluminum sulfate to enhance the hydration and hardening properties of Portland cement paste	124248
Wang, M. T. / Cai, X. F. / Lu, Y. B. / Noori, A. / Chen, F. M. / Chen, L. B. / Jiang, X. Q. / Liu, J. Q.	Tensile mechanical properties and failure mechanism of bamboo scrimber under different strain rates	124258
Wang, Sen / Gainey, Lloyd / Baxter, Daniel / Wang, Xiaodong / Mackinnon, Ian D. R. / Xi, Yunfei	Thermal behaviours of clay mixtures during brick firing: A combined study of in-situ XRD, TGA and thermal dilatometry	124319
Bala, Anu / Gupta, Supratic	Thermal resistivity, sound absorption and vibration damping of concrete composite doped with waste tire Rubber: A review	123939
Peng, Xiong / Zhong, Xingu / Zhao, Chao / Chen, Anhua / Zhang, Tianyu	A UAV-based machine vision method for bridge crack recognition and width quantification through hybrid feature learning	123896
Fang, Kuizhen / Wang, Dongmin / Zhao, Jihui / Zhang, Ming	Utilization of ladle furnace slag as cement partial replacement: Influences on the hydration and hardening properties of cement	124265
Alaloul, Wesam Salah / Al Salaheen, Marsail / Malkawi, Ahmad B. / Alzubi, Khalid / Al-Sabaeei, Abdulnaser M. / Musarat, Muhammad Ali	Utilizing of oil shale ash as a construction material: A systematic review	123844
Rodríguez-Álvaro, Roberto / Seara-Paz, Sindy / González-Fonteboa, Belén / Ferrándiz-Mas, Veronica / Paine, Kevin	Waste-Based porous materials as water reservoirs for the internal curing of Concrete. A review	124244

Informations
sur cette fiche
IssueID
59464
Publié(e) le:
02.09.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - septembre 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - septembre 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.