Construction and Building Materials - décembre 2020

Publié:	décembre 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Liu, Tiancheng / Yang, Shu / Braham, Andrew / Huang, Ruizhe	An alternative of crack length extension in R-curve analysis of asphalt concrete	120741
Meek, Alexandra H. / Beckett, Christopher T. S. / Elchalakani, Mohamed	Alternative stabilised rammed earth materials incorporating recycled waste and industrial by-products: Durability with and without water repellent	120629
Piña Ramírez, Carolina / Vidales Barriguete, Alejandra / Serrano Somolinos, Rubén / Merino, Mercedes del Río / Atanes Sánchez, Evangelina	Analysis of fire resistance of cement mortars with mineral wool from recycling	120349
Brencich, Antonio / Nebiacolombo, Matteo	Anchorage of reinforcement bars in Hennebique structures	120184
Meza de Luna, Alejandro / Shaikh, Faiz Uddin Ahmed	Anisotropy and bond behaviour of recycled Polyethylene terephthalate (PET) fibre as concrete reinforcement	120331
Banerjee, Lalima / Chawla, Sowmiya / Dash, Sujit Kumar	Application of geocell reinforced coal mine overburden waste as subballast in railway tracks on weak subgrade	120774
Xu, Jing / Tang, Yihong / Wang, Xianzhi / Wang, Zhongping / Yao, Wu	Application of ureolysis-based microbial CaCO3 precipitation in self-healing of concrete and inhibition of reinforcement corrosion	120364
Orosa, P. / Pasandín, A. R. / Pérez, I.	Assessment of two laboratory design methods for CIR mixtures with bitumen emulsion based on static and gyratory compaction	120667
Nguyễn, Huy Hoàng / Choi, Jeong-Il / Park, Se-Eon / Cha, Sang Lyul / Huh, Jungwon / Lee, Bang Yeon	Autogenous healing of high strength engineered cementitious composites (ECC) using calcium-containing binders	120857
Uppalapati, Siva / Vandewalle, Lucie / Cizer, Özlem	Autogenous shrinkage of slag-fly ash blends activated with hybrid sodium silicate and sodium sulfate at different curing temperatures	121276
Rashad, Alaa M. / Sadek, Dina M.	Behavior of alkali-activated slag pastes blended with waste rubber powder under the effect of freeze/thaw cycles and severe sulfate attack	120716
Hematabadi, Hojat / Madhoushi, Mehrab / Khazaeyan, Abolghasem / Ebrahimi, Ghanbar / Hindman, Daniel / Loferski, Joseph	Bending and shear properties of cross-laminated timber panels made of poplar (Populus alba)	120326
De Domenico, Dario / Urso, Santi / Borsellino, Chiara / Spinella, Nino / Recupero, Antonino	Bond behavior and ultimate capacity of notched concrete beams with externally-bonded FRP and PBO-FRCM systems under different environmental conditions	121208
Bazli, Milad / Zhao, Xiao-Ling / Singh Raman, R. K. / Bai, Yu / Al-Saadi, Saad	Bond performance between FRP tubes and seawater sea sand concrete after exposure to seawater condition	120342
Gao, Danying / Yan, Huanhuan / Fang, Dong / Yang, Lin	Bond strength and prediction model for deformed bar embedded in hybrid fiber reinforced recycled aggregate concrete	120337
Oldham, Daniel J. / Fini, Elham H.	A bottom-up approach to study the moisture susceptibility of bio-modified asphalt	120289
Yang, Mingjing / Sun, Jianheng / Dun, Chenyang / Duan, Yajing / Meng, Zhiliang	Cementitious activity optimization studies of iron tailings powder as a concrete admixture	120760
Costa, Juliana O. / Borges, Paulo H. R. / dos Santos, Flávio A. / Bezerra, Augusto Cesar S. / van den bergh, Wim / Blom, Johan	Cementitious binders and reclaimed asphalt aggregates for sustainable pavement base layers: Potential, challenges and research needs	120325
Payakaniti, Panjasila / Chuewangkam, Nattapong / Yensano, Rattakarn / Pinitsoontorn, Supree / Chindaprasirt, Prinya	Changes in compressive strength, microstructure and magnetic properties of a high-calcium fly ash geopolymer subjected to high temperatures	120650
Demircilioğlu, Erman / Teomete, Egemen / Ozbulut, Osman E.	Characterization of smart brass fiber reinforced concrete under various loading conditions	120411
Pan, Jingsheng / Xing, Hongyuan / Liu, Gang / Wang, Yong / Liu, Xing	Characterization of thermal properties of bituminous mastic containing different fillers to be used in the cool pavement	120362
Brunetti, Michele / Nocetti, Michela / Pizzo, Benedetto / Negro, Francesco / Aminti, Giovanni / Burato, Paolo / Cremonini, Corrado / Zanuttini, Roberto	Comparison of different bonding parameters in the production of beech and combined beech-spruce CLT by standard and optimized tests methods	120168
Khan, M. K. I. / Lee, C. K. / Zhang, Y. X. / Rana, Mohammad M.	Compressive behaviour of ECC confined concrete partially encased steel composite columns using high strength steel	120783
Yang, Jinbo / Zhang, Peng	A concise pore structure model for predicting the effective ion diffusion coefficients of cementitious materials	120321
Jahanbakhsh, Hamid / Karimi, Mohammad M. / Nejad, F. Moghadas	Correlation between asphalt concrete induced healing and rheological properties of asphalt binder	120577
Wang, Jie / Qin, Yongchun / Xu, Jian / Zeng, Wei / Zhang, Yange / Wang, Weiying / Wang, Peng	Crack resistance investigation of mixtures with reclaimed SBS modified asphalt pavement using the SCB and DSCT tests	120365
Wang, Tian / Wu, Kai / Wu, Min	Development of green binder systems based on flue gas desulfurization gypsum and fly ash incorporating slag or steel slag powders	120275
Pham, Thong M. / Liu, Junli / Tran, Phuong / Pang, Voon-Loong / Shi, Feng / Chen, Wensu / Hao, Hong / Tran, Tung M.	Dynamic compressive properties of lightweight rubberized geopolymer concrete	120753
Song, Chiwon / Hong, Geuntae / Choi, Seongcheol	Effect of dispersibility of carbon nanotubes by silica fume on material properties of cement mortars: Hydration, pore structure, mechanical properties, self-desiccation, and autogenous shrinkage	120318
Cheng, Congmi / Hong, Silei / Zhang, Yafang / He, Juan	Effect of expanded polystyrene on the flexural behavior of lightweight glass fiber reinforced cement	120328
Vallurupalli, Kavya / Meng, Weina / Liu, Jianhui / Khayat, Kamal H.	Effect of graphene oxide on rheology, hydration and strength development of cement paste	120311
Muthukrishnan, Shravan / Ramakrishnan, Sayanthan / Sanjayan, Jay	Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing	120786
Liao, Yishun / Jiang, Guoxi / Wang, Kejin / Al Qunaynah, Siraj / Yuan, Wenjie	Effect of steel slag on the hydration and strength development of calcium sulfoaluminate cement	120301
Dinç-Şengönül, Burcu / Oktay, Didem / Yuzer, Nabi	Effect of temperature, resting time and brick dust (Horasan) on the rheological properties of hydraulic lime-based grouts	120644
Pan, Chonggen / Mao, Jianghong / Jin, Weiliang / Fan, Weijie / Zhu, Dayong	Effects of environmental Water-Level changes and bidirectional electromigration rehabilitation on durability of concrete	120335
He, Bei / Zhu, Xinping / Ren, Qiang / Jiang, Zhengwu	Effects of fibers on flexural strength of ultra-high-performance concrete subjected to cryogenic attack	120323
Toprak, Nurettin Alper / Benzer, Ahmet Hakan / Karahan, Cumhur Erdem / Zencirci, Ergin Sarp	Effects of grinding aid dosage on circuit performance and cement fineness	120707
Karatas, Mehmet / Benli, Ahmet / Arslan, Furkan	The effects of kaolin and calcined kaolin on the durability and mechanical properties of self-compacting mortars subjected to high temperatures	120300
Wang, Hui / Zhang, Ailian / Zhang, Linchun / Wang, Qian / Yang, Xiao-hong / Gao, Xiaojian / Shi, Feiting	Electrical and piezoresistive properties of carbon nanofiber cement mortar under different temperatures and water contents	120740
Ma, Guowei / Zhang, Yuxiao / Liu, Xiongfei	Electromagnetic wave absorption performance of magnesium phosphate cement functionalized by nano-Fe3O4 magnetic fluid and hollow glass microspheres	120771
Si, Wen / Cao, Mingli / Li, Li	Establishment of fiber factor for rheological and mechanical performance of polyvinyl alcohol (PVA) fiber reinforced mortar	120347
Lara-Bocanegra, Antonio José / Majano-Majano, Almudena / Arriaga, Francisco / Guaita, Manuel	Eucalyptus globulus finger jointed solid timber and glued laminated timber with superior mechanical properties: Characterisation and application in strained gridshells	120355
Taherkhani, Hasan / Vahabi Kamsari, Sasan	Evaluating the properties of zinc production wastes as filler and their effects on asphalt mastic	120748
Hungria, Ricardo / Arce, Gabriel / Hassan, Marwa / Anderson, Michele / Mahdi, Moinul / Rupnow, Tyson / Bogus, Susan M.	Evaluation of novel jointless engineered cementitious composite ultrathin whitetopping (ECC-UTW) overlay	120659
Bi, Yanqiu / Wei, Ruyi / Li, Rui / Zhang, Jiupeng / Pei, Jianzhong	Evaluation of rheological master curves of asphalt mastics and asphalt-filler interaction indices	120046
Osmari, Patrícia Hennig / de Souza, Raquel Carvalho / Nascimento, Luis Alberto Herrmann do / Sacramento Aragão, Francisco Thiago	Evaluation of the relationship between the fatigue performance of FAM and AC mixtures based on volumetric characteristics and on the S-VECD theory	120294
Giordano, Ersilia / Mendes, Nuno / Masciotta, Maria Giovanna / Clementi, Francesco / Sadeghi, Neda Haji / Silva, Rui André / Oliveira, Daniel V.	Expeditious damage index for arched structures based on dynamic identification testing	120236
Wang, Hui / Hou, Feng / Chang, Chao	Experimental and computational modeling of thermal conductivity of cementitious syntactic foams filled with hollow glass microspheres	120739
You, Lingyun / Spyriouni, Theodora / Dai, Qingli / You, Zhanping / Khanal, Ashok	Experimental and molecular dynamics simulation study on thermal, transport, and rheological properties of asphalt	120358
Tang, Liqiu / Yang, Huifeng / Crocetti, Roberto / Liu, Jianzheng / Shi, Benkai / Gustafsson, Per Johan / Liu, Weiqing	Experimental and numerical investigations on the hybrid dowel and bonding steel plate joints for timber structures	120847
Xie, Chaopeng / Cao, Mingli / Si, Wen / Khan, Mehran	Experimental evaluation on fiber distribution characteristics and mechanical properties of calcium carbonate whisker modified hybrid fibers reinforced cementitious composites	120292
Ameli, Alireza / Pakshir, Amir Hossein / Babagoli, Rezvan / Norouzi, Navid / Nasr, Danial / Davoudinezhad, Siamak	Experimental investigation of the influence of Nano TiO2 on rheological properties of binders and performance of stone matrix asphalt mixtures containing steel slag aggregate	120750
Li, Yang / Wen, Kejun / Li, Lin / Huang, Wei / Bu, Changming / Amini, Farshad	Experimental investigation on compression resistance of bio-bricks	120751
Shen, Dejian / Li, Chengcai / Liu, Ci / Li, Ming / Kang, Jiacheng	Experimental investigations on early-age tensile creep of internally cured high strength concrete under different initial stress/strength ratios	120313
Wang, Siqi / Yuan, Yong / Tan, Ping / Zhu, Hongping / Luo, Kaitao	Experimental study on mechanical properties of casting high-capacity polyurethane elastomeric bearings	120725
Zhang, Zhi-jun / Tong, Kai-wen / Hu, Lin / Yu, Qing / Wu, Ling-ling	Experimental study on solidification of tailings by MICP under the regulation of organic matrix	120303
Deng, Xuejie / Yuan, Zongxuan / Li, Yu / Liu, Hao / Feng, Jianye / de Wit, Benjamin	Experimental study on the mechanical properties of microbial mixed backfill	120643
Baraccani, Simonetta / Zauli, Lucia / Theodossopoulos, Dimitris / Silvestri, Stefano	Experimental test on a fibre-reinforced scaled cross vault subjected to in-plane shear displacements at the springings	120305
Wei, Yunhao / Hu, Chengwei / Muhammad, Yaseen / Chen, Lishan / Zhou, Dali / Wang, Shanshan / Li, Jing / Chen, Qihang	Fabrication and performance evaluation of aminopropyl triethoxysilane-dopamine-MoS2 incorporated SBS modified asphalt	120346
Alimohammadi, Hossein / Zheng, Junxing / Buss, Ashley / Schaefer, Vernon R. / Williams, Christopher / Zheng, Guangfan	Field and simulated rutting behavior of hot mix and warm mix asphalt overlays	120366
Dashti, Javad / Nematzadeh, Mahdi	Flexural behavior of GFRP bar-reinforced calcium aluminate cement concrete beams containing forta-ferro fibers in acidic environment	120602
Dong, Zhiqiang / Wu, Gang / Zhu, Hong / Zhao, Xiao-Ling / Wei, Yang / Qian, Hao	Flexural behavior of seawater sea-sand coral concrete–UHPC composite beams reinforced with BFRP bars	120279
Hasan, Md Abul / Akiyama, Mitsuyoshi / Kashiwagi, Koya / Kojima, Keisuke / Peng, Long	Flexural behaviour of reinforced concrete beams repaired using a hybrid scheme with stainless steel rebars and CFRP sheets	120296
Kim, Jiyoung / Choi, Seongcheol	A fractal-based approach for reconstructing pore structures of GGBFS-blended cement pastes	120350
Jin, Mantong / Wang, Zhuohui / Lian, Fan / Zhao, Peisen	Freeze-thaw resistance and seawater corrosion resistance of optimized tannery sludge/metakaolin-based geopolymer	120730
Lin, Youli / Du, Hongjian	Graphene reinforced cement composites: A review	120312
Wang, Meng / Zhang, Min / Lu, Zeguang / Jia, Wanda	Hot pressing technology investigation of light-weight wooden brick	120426
Huang, Jinlin / Luo, Zhibin / Ehsan Khan, Muhammad Basit	Impact of aggregate type and size and mineral admixtures on the properties of pervious concrete: An experimental investigation	120759
Wang, Zhanqi / Xie, Jianguang / Gao, Lei / Liu, Mingxi / Liu, Yanping	Improvement of acoustic model and structural optimization design of porous asphalt concrete based on meso-structure research	120327
Zou, Guilian / Sun, Xuekai / Liu, Xinhai / Zhang, Junjie	Influence factors on using recycled concrete aggregate in foamed asphalt mixtures based on tensile strength and moisture resistance	120363
Jiang, Wei / Xie, Youjun / Wu, Jianxian / Long, Guangcheng	Influence of age on the detection of defects at the bonding interface in the CRTS III slab ballastless track structure via the impact-echo method	120787
Du, Jianhuan / Ai, Changfa / An, Shaoke / Ren, Dongya / Qiu, Yanjun	Influence of aggregate interference on the crack propagation of asphalt concrete by the configurational force fracture criterion	120293
Ahmad, Muhammad Riaz / Chen, Bing / Shah, Syed Farasat Ali	Influence of different admixtures on the mechanical and durability properties of one-part alkali-activated mortars	120320
Chen, Shikun / Zhang, Yajun / Yan, Dongming / Jin, Jiangchuxiong / Tian, Ye / Liu, Yi / Qian, Xiaoqian / Peng, Yu / Fujitsu, Satoru	The influence of Si/Al ratio on sulfate durability of metakaolin-based geopolymer	120735
Zahid, Muhammad / Shafiq, Nasir / Razak, Siti Nooriza A. / Tufail, Rana Faisal	Investigating the effects of NaOH molarity and the geometry of PVA fibers on the post-cracking and the fracture behavior of engineered geopolymer composite	120295
Liu, Quan / Wu, Jiantao / Qu, Xin / Wang, Chonghui / Oeser, Markus	Investigation of bitumen rheological properties measured at different rheometer gap sizes	120287
Xun, Xu / Xiaoling, Fan / Chenglin, Yang	Investigation on physical properties, strength and phase evolution of binary cementitious materials made of CFBC ash and lime	120302
Zhao, Haitao / Ding, Jian / Huang, Yuyu / Xu, Guodong / Li, Wei / Zhang, Shiping / Wang, Penggang	Investigation on sorptivity and capillarity coefficient of mortar and their relationship based on microstructure	120332
del Rey Castillo, Enrique / Almesfer, Nasser / Saggi, Opinder / Ingham, Jason M.	Light-weight concrete with artificial aggregate manufactured from plastic waste	120199
Ford, Emily / Kailas, Shankar / Maneparambil, Kailasnath / Neithalath, Narayanan	Machine learning approaches to predict the micromechanical properties of cementitious hydration phases from microstructural chemical maps	120647
Marani, Afshin / Nehdi, Moncef L.	Machine learning prediction of compressive strength for phase change materials integrated cementitious composites	120286
Nasir, Muhammad / Megat Johari, Megat Azmi / Maslehuddin, Mohammed / Yusuf, Moruf Olalekan	Magnesium sulfate resistance of alkali/slag activated silico-manganese fume-based composites	120851
Wu, Chao / Vahedi, Niloufar / Vassilopoulos, Anastasios P. / Keller, Thomas	Mechanical properties of a balsa wood veneer structural sandwich core material	120193
Brulin, Jérôme / Blond, Eric / de Bilbao, Emmanuel / Rekik, Amna / Landreau, Matthieu / Gasser, Alain / Colleville, Yannick	Methodology for brick/mortar interface strength characterization at high temperature	120565
Ji, Xiaoping / Li, Jia / Zou, Haiwei / Hou, Yueqin / Chen, Bo / Jiang, Yingjun	Multi scale investigation on the failure mechanism of adhesion between asphalt and aggregate caused by aging	120361
Chen, Xuandong / Yu, Aiping / Liu, Guangyan / Chen, Ping / Liang, Qiuqun	A multi-phase mesoscopic simulation model for the diffusion of chloride in concrete under freeze–thaw cycles	120223
Li, Yuanyuan / Li, Hechuan / Nie, Shuai / Wu, Shaopeng / Liu, Quantao / Li, Chuangmin / Shu, Benan / Li, Chao / Song, Wei / Zou, Yingxue / Pang, Ling	Negative impacts of environmental factors (UV radiation, water and different solutions) on bitumen and its mechanism	120288
Ali, Zeinab Sayed / Hosseinpoor, Masoud / Yahia, Ammar	New aggregate grading models for low-binder self-consolidating and semi-self-consolidating concrete (Eco-SCC and Eco-semi-SCC)	120314
Dingqiang, Fan / Rui, Yu / Zhonghe, Shui / Chunfeng, Wu / Jinnan, Wang / Qiqi, Su	A novel approach for developing a green Ultra-High Performance Concrete (UHPC) with advanced particles packing meso-structure	120339
Meethaworn, Benjama / Srivaro, Suthon / Khongtong, Sureurg	A novel densifying method for the development of high strength rubberwood for structural application	120862
Zhang, Xiaoyan / Zhao, Min / Liu, Lang / Huan, Chao / Zhao, Yujiao / Qi, Chongchong / Song, Ki-Il	Numerical simulation on heat storage performance of backfill body based on tube-in-tube heat exchanger	120340
Karimi, H. / Gauvin, F. / Brouwers, H. J. H. / Cardinaels, R. / Yu, Qingliang	On the versatility of paper pulp as a viscosity modifying admixture for cement composites	120660
Mao, Jia-hua / Yuan, Da-Jun / Jin, Da-Long / Zeng, Jian-feng	Optimization and application of backfill grouting material for submarine tunnel	120281
Araújo Silva, Lorena / de Oliveira Nahime, Bacus / dos Santos Felipe, Alexsandro / Nelson Elias, Carlos / Ribeiro do Carmo, Devaney / Carvalho de Lima, Elton / Soares dos Santos, Igor / Lopes Lima, Karen / Istuque, Danilo	Performance of cementitious matrices incorporating concrete floor polishing sludge waste	120119
Hodhod, Osama A. / Alharthy, Samiha E. / Bakr, Shreen M.	Physical and mechanical properties for metakaolin geopolymer bricks	120217
Mousavimehr, Mehdi / Nematzadeh, Mahdi	Post-heating flexural behavior and durability of hybrid PET–Rubber aggregate concrete	120359
Tedjditi, Ahmed Kamel / Ghomari, Fouad / Taleb, Omar / Belarbi, Rafik / Tarik Bouhraoua, Rachid	Potential of using virgin cork as aggregates in development of new lightweight concrete	120734
Moussa, Ghada S. / Owais, Mahmoud	Pre-trained deep learning for hot-mix asphalt dynamic modulus prediction with laboratory effort reduction	120239
Shen, Dejian / Liu, Ci / Wang, Mingliang / Jin, Xingcan / Tang, Hui	Prediction model for internal relative humidity in early-age concrete under different curing humidity conditions	119987
Behbahani, Hamid / Hamedi, Gholam Hossein / Najafi Moghaddam Gilani, Vahid	Predictive model of modified asphalt mixtures with nano hydrated lime to increase resistance to moisture and fatigue damages by the use of deicing agents	120353
Li, Ying / Yu, Jiangying / Cao, Zhilong / Du, Wei / Zhang, Yichi / Zou, Yang	Preparation and characterization of nano-Fe3O4/paraffin encapsulated isocyanate microcapsule by electromagnetic controlled rupture for self-healing cementitious materials	120703
Liu, Shaoqing / Wang, Dongmin / Guo, Jianping / Zhang, Lei / Yuan, Ning	Pressed recycled fly ash and carbide slag: Hydration of entirely waste-stream building components	120282
Aslani, Fatemeh / Dehestani, Mehdi	Probabilistic impacts of corrosion on structural failure and performance limits of reinforced concrete beams	120316
Solanki, Pranshoo / Bierma, Thomas / Jin, Guang	Properties of flowable fill produced by substituting fly ash with recycled glass powder	120330
Choi, Eunsoo / Ostadrahimi, Alireza / Lee, Jong-Han	Pullout resistance of crimped reinforcing fibers using cold-drawn NiTi SMA wires	120858
Li, Lingling / Cao, Gengyu / Zhao, Ruiming / Wu, Shikui / Wang, Li / Li, Xiang / Zeng, Senwei	Recycling of construction and demolition waste to fabricate cost-effective anorthite ceramic membranes for enhanced separation of an oil-in-water emulsion	120512
Han, Jinsheng / Pan, Jinlong / Cai, Jingming / Li, Xiaopeng	A review on carbon-based self-sensing cementitious composites	120764
Omairey, Eman L. / Zhang, Yuqing / Gu, Fan / Ma, Tao / Hu, Pengsen / Luo, Rong	Rheological and fatigue characterisation of bitumen modified by anti-ageing compounds	120307
Focacci, Francesco / D'Antino, Tommaso / Carloni, Christian	The role of the fiber–matrix interfacial properties on the tensile behavior of FRCM coupons	120263
El Masri, Yasser / Rakha, Tarek	A scoping review of non-destructive testing (NDT) techniques in building performance diagnostic inspections	120542
Jiang, Haoyu / Ji, Haodong / Jin, Nanguo / Tian, Ye / Jin, Xianyu / Ye, Hailong / Yan, Dongming / Tian, Zushi	Simulation and experimental verification of the non-uniform corrosion cracking process of reinforced mortar specimen	120522
Qian, Yu / Guo, Feng / Leng, Zhen / Zhang, Yuan / Yu, Huayang	Simulation of the field aging of asphalt binders in different reclaimed asphalt pavement (RAP) materials in Hong Kong through laboratory tests	120651
Wu, Shengxing / Wang, Xin / Shen, Dejian / Sun, Kewei / Zhu, Jie	Simulations of diffusion-controlled and dissolution mechanisms with respect to the deceleration period of tricalcium silicate hydration	120458
Courtois, Alexis / Taillade, Frédéric / Placko, Dominique	Some considerations on the benefit of measuring concrete moisture to predict long term structural behaviour	120283
Costa, Eliane Betânia Carvalho / de França, Marylinda Santos / Navarro Bergossi, Fábio Luiz / Borges, Renan Kiapuchinski	Squeeze flow of mortars on brick substrate and its relation with bond strength	120298
Barreto Santos, Miguel / de Brito, Jorge / Silva, António Santos / Hasan Ahmed, Hawreen	Study of ASR in concrete with recycled aggregates: Influence of aggregate reactivity potential and cement type	120743
Chang, Jung-Nan / Wang, Wei-Chien / Wang, Her-Yung / Hu, Cong-Yuan	A study of the mechanical properties and appearance of efflorescence in paving bricks under different curing environments	120148
Xu, Meng / Zhang, Yuzhen / Zhao, Pinhui / Liu, Cheng	Study on aging behavior and prediction of SBS modified asphalt with various contents based on PCA and PLS analysis	120732
Wang, Dongli / Zhao, Qingxin / Yang, Ce / Chi, Yaao / Qi, Wenyue / Teng, Zhenchao	Study on frost resistance and vegetation performance of seashell waste pervious concrete in cold area	120758
Liang, Kun / You, Chuang / Li, Xiaoguang / Tian, Wei / Liu, Yunxiao / Qu, Yaan / Luo, Gang	Study on two-dimensional capillary water rise in cracked and uncracked cement based materials	120310
Bao, Shiwen / Liu, Quantao / Rao, Wenhao / Yu, Xin / Zhang, Lei	Synthesis and characterization of calcium alginate-attapulgite composite capsules for long term asphalt self-healing	120779
Sun, Zhen / Zhang, Lu / Niu, Ditao / Wen, Bo / Luo, Daming	Time-varying model for predicting the resistivity of coral aggregate concrete	120588
Cascardi, Alessio / Leone, Marianovella / Aiello, Maria Antonietta	Transversal joining of multi-leaf masonry through different types of connector: Experimental and theoretical investigation	120733
Lv, Songtao / Guo, Yanpeng / Xia, Chengdong / Wang, XiaoFeng / You, Lingyun / Borges Cabrera, Milkos / Li, Jianglong	Unified approach to characterize the strength of cement stabilized macadam subjected to different loading modes	120143
Hamada, Hussein M. / Thomas, Blessen Skariah / Tayeh, Bassam / Yahaya, Fadzil M. / Muthusamy, Khairunisa / Yang, Jian	Use of oil palm shell as an aggregate in cement concrete: A review	120357
Yan, Xiancui / Jiang, Linhua / Guo, Mingzhi / Chen, Yunjie / Zhu, Pengfei / Jin, Weizhun / Zha, Jie	Using EDTA-2Na to inhibit sulfate attack in slag cement mortar under steam curing	120324
Gu, Kang / Chen, Bing / Pan, Yongjian	Utilization of untreated-phosphogypsum as filling and binding material in preparing grouting materials	120749
Sol-Sánchez, Miguel / Jiménez del Barco Carrión, Ana / Hidalgo-Arroyo, Ana / Moreno-Navarro, Fernando / Saiz, Leticia / Rubio-Gámez, María del Carmen	Viability of producing sustainable asphalt mixtures with crumb rubber bitumen at reduced temperatures	120154
Xue, Chen / Gao, Hanyang / Hu, Guoxin	Viscoelastic and fatigue properties of graphene and carbon black hybrid structure filled natural rubber composites under alternating loading	120299
Mei, Shengqi / Wang, Yuanfeng	Viscoelasticity: A new perspective on correlation between concrete creep and damping	120557
Hong, Shuxian / Kuang, Chuan / Zhang, Jianchao / Hou, Dongshuai / Zhang, Jinrui / Liu, Laibao / Dong, Biqin	Visual analysis for microscopic cracking propagation of rubberized concrete	120599
Ding, Zhu / Li, Ding-Fa / Wang, Yan-Shuai / Hong, Shu-Xian / Dong, Bi-qin	Water distribution characteristics and research with capillary absorption for magnesium phosphate cement-coated cement pastes	120319
Gwon, Seongwoo / Ahn, Eunjong / Shin, Myoungsu	Water permeability and rapid self-healing of sustainable sulfur composites using superabsorbent polymer and binary cement	120306

Informations
sur cette fiche
IssueID
37443
Publié(e) le:
14.08.2020
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - décembre 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - décembre 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.