Construction and Building Materials - janvier 2018

Publié:	janvier 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Cao, Lei / Guo, Jintang / Tian, Jianhua / Hu, Miaomiao / Guo, Chun / Xu, Yang / Wang, Meiyu / Fan, Jinjie	The ability of sodium metasilicate pentahydrate to adjust the compatibility between synthetic Fluid Loss Additives and Retarders applying in oil well cement	835-846
Hartikainen, Ari / Pellinen, Terhi / Huuskonen-Snicker, Eeva / Eskelinen, Pekka	Algorithm to process the stepped frequency radar signal for a thin road surface application	1090-1098
Kamboozia, N. / Ziari, H. / Behbahani, H.	Artificial neural networks approach to predicting rut depth of asphalt concrete by using of visco-elastic parameters	873-882
Pourfalah, S.	Behaviour of engineered cementitious composites and hybrid engineered cementitious composites at high temperatures	921-937
Yang, Yu / Ji, Tao / Lin, Xujian / Chen, Caiyi / Yang, Zhengxian	Biogenic sulfuric acid corrosion resistance of new artificial reef concrete	33-41
Lu, Yiyan / Liu, Zhenzhen / Li, Shan / Li, Na	Bond behavior of steel fibers reinforced self-stressing and self-compacting concrete filled steel tube columns	894-909
Wu, Jieqiong / Faye, Papa Niane / Zhang, Wuman / Diao, Bo	Chloride diffusivity and service life prediction of RC columns with sustained load under chloride environment	97-107
Cao, Qi / Gao, Quanqing / Gao, Rongxiong / Jia, Jinqing	Chloride penetration resistance and frost resistance of fiber reinforced expansive self-consolidating concrete	719-727
De Windt, Imke / Li, Wanzhao / van den Bulcke, Jan / Van Acker, Joris	Classification of uncoated plywood based on moisture dynamics	814-822
Smith, Sadie / Braham, Andrew	Comparing layer types for the use of PavementME for asphalt emulsion Full Depth Reclamation design	481-489
Lv, Songtao / Liu, Chaochao / Yao, Hui / Zheng, Jianlong	Comparisons of synchronous measurement methods on various moduli of asphalt mixtures	1035-1045
Ren, Qingwen / Li, Qiang / Yin, Yajuan	Concrete meso-structure characteristics and mechanical property research with numerical methods	189-197
Wu, Di / Deng, Tengfei / Zhao, Runkang	A coupled THMC modeling application of cemented coal gangue-fly ash backfill	326-336
Zhai, L. H. / Gao, Y. / Yuan, Q. / Shi, H. O.	Deformation characterizations of granular material in 2D dense assembly subjected to shearing	1065-1072
Jiang, Cheng / Wu, Yu-Fei / Dai, Ming-Jiang	Degradation of steel-to-concrete bond due to corrosion	1073-1080
Liu, Xiang / Serhir, Mohammed / Lambert, Marc	Detectability of junctions of underground electrical cables with a ground penetrating radar: Electromagnetic simulation and experimental measurements	1099-1110
Yu, Ke-Quan / Yu, Jiang-Tao / Dai, Jian-Guo / Lu, Zhou-Dao / Shah, Surendra P.	Development of ultra-high performance engineered cementitious composites using polyethylene (PE) fibers	217-227
Serbah, Boumediene / Abou-Bekr, Nabil / Bouchemella, Salima / Eid, Joanna / Taibi, Saïd	Dredged sediments valorisation in compressed earth blocks: Suction and water content effect on their mechanical properties	503-515
Bharathi, M. / Dubey, R. N.	Dynamic lateral response of under-reamed vertical and batter piles	910-920
Merino, Mercedes del Río / Santa Cruz Astorqui, Jaime / Sáez, Paola Villoria / Santos Jiménez, Rocío / González Cortina, Mariano	Eco plaster mortars with addition of waste for high hardness coatings	649-656
Kong, Yaning / Wang, Peiming / Liu, Shuhua / Gao, Zhiyang / Rao, Meijuan	Effect of microwave curing on the hydration properties of cement-based material containing glass powder	563-573
Sitton, Jase D. / Zeinali, Yasha / Heidarian, William H. / Story, Brett A.	Effect of mix design on compressed earth block strength	124-131
Chen, Junhong / Liang, Chaojing / Li, Bin / Wang, Enhui / Li, Guangqi / Hou, Xinmei	The effect of nano-γAl 2 O 3 additive on early hydration of calcium aluminate cement	755-760
Menapace, Ilaria / Cucalon, Lorena Garcia / Kaseer, Fawaz / Arámbula-Mercado, Edith / Martin, Amy Epps / Masad, Eyad / King, Gayle	Effect of recycling agents in recycled asphalt binders observed with microstructural and rheological tests	61-74
Mehrinejad Khotbehsara, Mojdeh / Miyandehi, Bahareh Mehdizadeh / Naseri, Farzad / Ozbakkaloglu, Togay / Jafari, Faezeh / Mohseni, Ehsan	Effect of SnO 2 , ZrO 2 , and CaCO 3 nanoparticles on water transport and durability properties of self-compacting mortar containing fly ash: Experimental observations and ANFIS predictions	823-834
Wang, Jinbang / Li, FangShu / Zhou, Zonghui / Du, Peng / Xu, Dongyu / Xie, Ning / Cheng, Xin / Liu, Yu	Effect of zeolite on waste based alkali-activated inorganic binder efflorescence	683-690
Chen, Tiefeng / Gao, Xiaojian / Ren, Miao	Effects of autoclave curing and fly ash on mechanical properties of ultra-high performance concrete	864-872
Ozeren Ozgul, Eren / Ozkul, M. Hulusi	Effects of epoxy, hardener, and diluent types on the workability of epoxy mixtures	369-377
Jeffry, Siti Nur Amiera / Jaya, Ramadhansyah Putra / Hassan, Norhidayah Abdul / Yaacob, Haryati / Mirza, Jahangir / Drahman, Siti Hasyyati	Effects of nanocharcoal coconut-shell ash on the physical and rheological properties of bitumen	1-10
Qian, Guoping / Wang, Kun / Bai, Xianping / Xiao, Ting / Jin, Dazhong / Huang, Qianjin	Effects of surface modified phosphate slag powder on performance of asphalt and asphalt mixture	1081-1089
Dimitriou, George / Savva, Pericles / Petrou, Michael F.	Enhancing mechanical and durability properties of recycled aggregate concrete	228-235
Singh, Dharamveer / Habal, Ayyanna / Ashish, Prabin Kumar / Kataware, Aniket	Evaluating suitability of energy efficient and anti-stripping additives for polymer and Polyphosphoric acid modified asphalt binder using surface free energy approach	949-960
Arámbula-Mercado, Edith / Kaseer, Fawaz / Martin, Amy Epps / Yin, Fan / Cucalon, Lorena Garcia	Evaluation of recycling agent dosage selection and incorporation methods for asphalt mixtures with high RAP and RAS contents	432-442
de Almeida, Adosindro Joaquim / Momm, Leto / Trichês, Glicério / Shinohara, Keyla Junko	Evaluation of the influence of water and temperature on the rheological behavior and resistance to fatigue of asphalt mixtures	401-409
Yoon, Jin Young / Kim, Jae Hong	Evaluation on the consumption and performance of polycarboxylates in cement-based materials	423-431
Ma, Xu / Copuroglu, Oguzhan / Schlangen, Erik / Han, Ningxu / Xing, Feng	Expansion and degradation of cement paste in sodium sulfate solutions	410-422
D'Alessandro, Francesco / Baldinelli, Giorgio / Bianchi, Francesco / Sambuco, Sara / Rufini, Alessandra	Experimental assessment of the water content influence on thermo-acoustic performance of building insulation materials	264-274
Uzel, Murat / Togay, Abdullah / Anil, Özgür / Söğütlü, Cevdet	Experimental investigation of flexural behavior of glulam beams reinforced with different bonding surface materials	149-163
Zuo, Yize / Liu, Yuqing / He, Jun	Experimental investigation on hybrid GFRP-concrete decks with T-shaped perforated ribs subjected to negative moment	728-741
Shufeng, Li / Qingning, Li / Hao, Zhang / Haotian, Jiang / Lei, Yan / Weishan, Jiang	Experimental study of a fabricated confined concrete beam-to-column connection with end-plates	208-216
Deng, Xuejie / Klein, Bern / Tong, Libin / de Wit, Benjamin	Experimental study on the rheological behavior of ultra-fine cemented backfill	985-994
Saraswathy, Velu / Lee, Han-Seung / Karthick, Subbiah / Kwon, Seung-Jun	Extraction of chloride from chloride contaminated concrete through electrochemical method using different anodes	549-562
Castañeda López, Mario Alexander / Fedrigo, William / Kleinert, Thaís Radünz / Matuella, Matheus Ferreira / Núñez, Washington Peres / Ceratti, Jorge Augusto Pereira	Flexural fatigue evaluation of cement-treated mixtures of reclaimed asphalt pavement and crushed aggregates	320-325
Zoorob, Salah E. / Mturi, Georges A. / Sangiorgi, Cesare / Dinis-Almeida, Marisa / Habib, Noor Zainab	Fluxing as a new tool for bitumen rheological characterization and the use of time-concentration shift factor (a c )	691-699
Esposito Corcione, Carola / Palumbo, Elisabetta / Masciullo, Angela / Montagna, Francesco / Torricelli, Maria Chiara	Fused Deposition Modeling (FDM): An innovative technique aimed at reusing Lecce stone waste for industrial design and building applications	276-284
Ling, Tung-Chai / Kaliyavaradhan, Senthil Kumar / Poon, Chi Sun	Global perspective on application of controlled low-strength material (CLSM) for trench backfilling – An overview	535-548
Alani, Amir M. / Tosti, Fabio	GPR applications in structural detailing of a major tunnel using different frequency antenna systems	1111-1122
Li, Guoxin / Zhang, Ai / Song, Zhanping / Liu, Shengjun / Zhang, Jiangbo	Ground granulated blast furnace slag effect on the durability of ternary cementitious system exposed to combined attack of chloride and sulfate	640-648
Jia, Zijian / Yang, Yuanyuan / Yang, Lingyan / Zhang, Yamei / Sun, Zhengming	Hydration products, internal relative humidity and drying shrinkage of alkali activated slag mortar with expansion agents	198-207
Liuzzi, Stefania / Rubino, Chiara / Stefanizzi, Pietro / Petrella, Andrea / Boghetich, Adriano / Casavola, Caterina / Pappalettera, Giovanni	Hygrothermal properties of clayey plasters with olive fibers	24-32
Marini, Alessandra / Cominelli, Stefania / Zanotti, Cristina / Giuriani, Ezio	Improved natural hydraulic lime mortar slab for compatible retrofit of wooden floors in historical buildings	801-813
Xu, Feng / Huang, De-dong / Du, Xusheng	Improving the delamination resistance of carbon fiber/epoxy composites by brushing and abrading of the woven fabrics	257-263
Joshi, Sumit / Goyal, Shweta / Sudhakara Reddy, M.	Influence of nutrient components of media on structural properties of concrete during biocementation	601-613
Mikhailenko, Peter / Cassagnabère, Franck / Emam, Aly / Lachemi, Mohamed	Influence of physico-chemical characteristics on the carbonation of cement paste at high replacement rates of metakaolin	164-172
Feng, Wei / Xu, Jinxia / Chen, Ping / Jiang, Linhua / Song, Yingbin / Cao, Yalong	Influence of polycarboxylate superplasticizer on chloride binding in cement paste	847-854
Alber, Stefan / Ressel, Wolfram / Liu, Pengfei / Wang, Dawei / Oeser, Markus	Influence of soiling phenomena on air-void microstructure and acoustic performance of porous asphalt pavement	938-948
Bautista-De Castro, Álvaro / Sánchez-Aparicio, Luis Javier / Ramos, Luís F. / Sena-Cruz, José / González-Aguilera, Diego	Integrating geomatic approaches, Operational Modal Analysis, advanced numerical and updating methods to evaluate the current safety conditions of the historical Bôco Bridge	961-984
Chanda, Dipak Kr / Chowdhury, Subhro Roy / Bhattacharya, Manjima / Mandal, Ashok Kumar / Dey, Nitai / Mukhopadhyay, Anoop Kumar	Intelligently designed fly-ash based hybrid composites with very high hardness and Young’s modulus	516-534
Gholhaki, Majid / Kheyroddin, Ali / Hajforoush, Mohammad / Kazemi, Mostafa	An investigation on the fresh and hardened properties of self-compacting concrete incorporating magnetic water with various pozzolanic materials	173-180
Xu, Gelong / Shen, Weiguo / Huo, Xujia / Yang, Zhifeng / Wang, Jing / Zhang, Wensheng / Ji, Xiaoli	Investigation on the properties of porous concrete as road base material	141-148
Leng, Zhen / Zhang, Zeyu / Zhang, Yuan / Wang, Yangyang / Yu, Huayang / Ling, Tianqing	Laboratory evaluation of electromagnetic density gauges for hot-mix asphalt mixture density measurement	1055-1064
Tabarsa, Alireza / Latifi, Nima / Meehan, Christopher L. / Manahiloh, Kalehiwot Nega	Laboratory investigation and field evaluation of loess improvement using nanoclay – A sustainable material for construction	454-463
Han, Bingye / Ling, Jianming / Shu, Xiang / Gong, Hongren / Huang, Baoshan	Laboratory investigation of particle size effects on the shear behavior of aggregate-geogrid interface	1015-1025
Singh, Dharamveer / Ashish, Prabin Kumar / Chitragar, Srinivas F.	Laboratory performance of Recycled Asphalt Mixes containing wax and chemical based Warm Mix Additives using Semi Circular Bending and Tensile Strength Ratio tests	1003-1014
Moradpour, Payam / Pirayesh, Hamidreza / Gerami, Masood / Rashidi Jouybari, Iman	Laminated strand lumber (LSL) reinforced by GFRP; mechanical and physical properties	236-242
García Hernández, Maria Inmaculada	Life time prediction for low energy and ecological effects bituminous mixtures	108-113
Sarıdemir, Mustafa / Çiflikli, Murat / Soysat, Faruk	Mechanical and microstructural properties of HFRHSCs containing metakaolin subjected to elevated temperatures and freezing-thawing cycles	11-23
Guruprasad, Y. K. / Ramaswamy, Ananth	Micromechanical analysis of concrete and reinforcing steel exposed to high temperature	761-773
Xu, Guangji / Wang, Hao / Sun, Wei	Molecular dynamics study of rejuvenator effect on RAP binder: Diffusion behavior and molecular structure	1046-1054
Yu, Jiangmiao / Xiong, Chunlong / Zhang, Xiaoning / Li, Weixiong	More accurate modulus back-calculation by reducing noise information from in situ–measured asphalt pavement deflection basin using regression model	1026-1034
Hu, Chuanlin / Gautam, Bishnu P. / Panesar, Daman K.	Nano-mechanical properties of alkali-silica reaction (ASR) products in concrete measured by nano-indentation	75-83
Nemati, Rasool / Dave, Eshan V.	Nominal property based predictive models for asphalt mixture complex modulus (dynamic modulus and phase angle)	308-319
Song, Qiulei / Yu, Rui / Wang, Xinpeng / Rao, Suduan / Shui, Zhonghe	A novel Self-Compacting Ultra-High Performance Fibre Reinforced Concrete (SCUHPFRC) derived from compounded high-active powders	883-893
Yu, Yuguo / Zhang, Y. X.	Numerical modelling of mechanical deterioration of cement mortar under external sulfate attack	490-502
Garrido, M. / António, D. / Lopes, J. G. / Correia, J. R.	Performance of different joining techniques used in the repair of bituminous waterproofing membranes	346-358
Sharkawi, Aladdin M. / Mehriz, Alaa M. / Showaib, Ezzat A. / Hassanin, Ahmed	Performance of sustainable natural yarn reinforced polymer bars for construction applications	359-368
Zhang, Yuan / Leng, Zhen / Dong, Zejiao / Liu, Zhiyang / Zhang, Zeyu / Tan, Zhifei	Performance verification of various bulk density measurement methods for open- and gap-graded asphalt mixtures using X-ray computed tomography	855-863
Singh, V. P. / Sandeep, Kumar / Kushwaha, H. S. / Powar, Satvasheel / Vaish, Rahul	Photocatalytic, hydrophobic and antimicrobial characteristics of ZnO nano needle embedded cement composites	285-294
Westgate, Paul / Paine, Kevin / Ball, Richard J.	Physical and mechanical properties of plasters incorporating aerogel granules and polypropylene monofilament fibres	472-480
Zheng, Dong / Qian, Zhen-dong / Liu, Yang / Liu, Chang-bo	Prediction and sensitivity analysis of long-term skid resistance of epoxy asphalt mixture based on GA-BP neural network	614-623
Padhan, Rabindra K. / Gupta, Anurag A.	Preparation and evaluation of waste PET derived polyurethane polymer modified bitumen through in situ polymerization reaction	337-345
Alsubari, Belal / Shafigh, Payam / Ibrahim, Zainah / Alnahhal, Mohammed Fouad / Jumaat, Mohd Zamin	Properties of eco-friendly self-compacting concrete containing modified treated palm oil fuel ash	742-754
Ohtsu, Masayasu	Prospective applications of AE measurements to infra-dock of concrete structures	1134-1142
Liu, Zhichao / Hansen, Will / Wang, Fazhou	Pumping effect to accelerate liquid uptake in concrete and its implications on salt frost durability	181-188
Wu, Shengxing / Sun, Kewei / Zhao, Haitao / Zhang, Fengchen	Quantitative invalidation characterization of Portland cement based on BSE and EDS analysis	700-706
Baaj, Hassan / Mikhailenko, Peter / Almutairi, Haya / Di Benedetto, Hervé	Recovery of asphalt mixture stiffness during fatigue loading rest periods	591-600
Chen, Ying-Liang / Ko, Ming-Sheng / Chang, Juu-En / Lin, Chun-Ta	Recycling of desulfurization slag for the production of autoclaved aerated concrete	132-140
Kadioglu, Selma	Research of the sea-filled airport OGU in the Black Sea, Turkey, using ground penetrating radar method	1123-1133
Jiang, Jiwang / Ni, Fujian / Dong, Qiao / Wu, Fan / Dai, Yiqing	Research on the fatigue equation of asphalt mixtures based on actual stress ratio using semi-circular bending test	996-1002
Song, Aiming / Wan, Shui / Jiang, Zhengwen / Xu, Jie	Residual deflection analysis in negative moment regions of steel-concrete composite beams under fatigue loading	50-60
Zheng, Yue / Dong, You / Li, Yaohan	Resilience and life-cycle performance of smart bridges with shape memory alloy (SMA)-cable-based bearings	389-400
Jiang, Shan / Shan, Baohua / Ouyang, Jian / Zhang, Wei / Yu, Xun / Li, Peigang / Han, Baoguo	Rheological properties of cementitious composites with nano/fiber fillers	786-800
He, An / Cai, Jian / Chen, Qing-Jun / Liu, Xinpei / Huang, Peizhou / Tang, Xu-Lin	Seismic behaviour of steel-jacket retrofitted reinforced concrete columns with recycled aggregate concrete	624-639
Saroufim, Edwina / Celauro, Clara / Mistretta, Maria Chiara	A simple interpretation of the effect of the polymer type on the properties of PMBs for road paving applications	114-123
Durgun, Muhammed Yasin / Atahan, Hakan Nuri	Strength, elastic and microstructural properties of SCCs’ with colloidal nano silica addition	295-307
Sun, Xiaowang / Zhao, Kai / Li, Yongchi / Huang, Ruiyuan / Ye, Zhongbao / Zhang, Yongliang / Ma, Jian	A study of strain-rate effect and fiber reinforcement effect on dynamic behavior of steel fiber-reinforced concrete	657-669
Rambo, Dimas Alan Strauss / Blanco, Ana / de Figueiredo, Antonio Domingues / Fernandes dos Santos, Edson Rodrigo / Toledo, Romildo Dias / Gomes, Otávio da Fonseca Martins	Study of temperature effect on macro-synthetic fiber reinforced concretes by means of Barcelona tests: An approach focused on tunnels assessment	443-453
Halvaei, Mana / Latifi, Masoud / Jamshidi, Masoud	Study of the microstructure and flexural behavior of cementitious composites reinforced by surface modified carbon textiles	243-256
Matalkah, Faris / Soroushian, Parviz	Synthesis and characterization of alkali aluminosilicate hydraulic cement that meets standard requirements for general use	42-49
Prem, Prabhat Ranjan / Murthy, A. Ramachandra / Verma, Mohit	Theoretical modelling and acoustic emission monitoring of RC beams strengthened with UHPC	670-682
Mirzanamadi, Raheb / Johansson, Pär / Grammatikos, Sotirios A.	Thermal properties of asphalt concrete: A numerical and experimental study	774-785
Dao, Kalifala / Ouedraogo, Moussa / Millogo, Younoussa / Aubert, Jean-Emmanuel / Gomina, Moussa	Thermal, hydric and mechanical behaviours of adobes stabilized with cement	84-96
Zhang, Kaijian / Xiao, Jianzhuang	Time-dependent reliability analysis on carbonation behavior of recycled aggregate concrete based on gamma process	378-388
Kupwade-Patil, Kunal / Palkovic, Steven D. / Bumajdad, Ali / Soriano, Carmen / Büyüköztürk, Oral	Use of silica fume and natural volcanic ash as a replacement to Portland cement: Micro and pore structural investigation using NMR, XRD, FTIR and X-ray microtomography	574-590
Chousidis, N. / Ioannou, I. / Batis, G.	Utilization of Electrolytic Manganese Dioxide (E.M.D.) waste in concrete exposed to salt crystallization	708-718
Yacoub, Aiman / Djerbi, Assia / Fen-chong, Teddy	Water absorption in recycled sand: New experimental methods to estimate the water saturation degree and kinetic filling during mortar mixing	464-471

Informations
sur cette fiche
IssueID
35506
Publié(e) le:
12.12.2019
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - janvier 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - janvier 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.