Construction and Building Materials - janvier 2018

Publié:	janvier 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Moghaddam, Taher Baghaee / Baaj, Hassan	Application of compressible packing model for optimization of asphalt concrete mix design	530-539
Martins, Roseli Oliveira Guedes / Alvarenga, Rita de Cássia S. Sant'Ana / Pedroti, Leonardo Gonçalves / de Oliveira, André Fernando / Cardoso Mendes, Beatryz / Garcez de Azevedo, Afonso Rangel	Assessment of the durability of grout submitted to accelerated carbonation test	261-268
Xu, B. / Bompa, D. V. / Elghazouli, A. Y. / Ruiz-Teran, A. M. / Stafford, P. J.	Behaviour of rubberised concrete members in asymmetric shear tests	361-375
de Sena Costa, Bruno Leonardo / de Oliveira Freitas, Júlio Cezar / Silva Santos, Paulo Henrique / de Araújo Melo, Dulce Maria / Gomes da Silva Araújo, Romero / Henrique de Oliveira, Yvis	Carbonation in oil well Portland cement: Influence of hydration time prior to contact with CO2	252-260
Qin, Xiao / Shen, Aiqin / Guo, Yinchuan / Li, Zhennan / Lv, Zhenghua	Characterization of asphalt mastics reinforced with basalt fibers	508-516
da Silva Andrade, Daniel / da Silva Rêgo, João Henrique / Morais, Paulo Cesar / Rojas, Moisés Frías	Chemical and mechanical characterization of ternary cement pastes containing metakaolin and nanosilica	18-26
Pattanaik, Madhu Lisha / Choudhary, Rajan / Kumar, Bimlesh	Clogging evaluation of open graded friction course mixes with EAF steel slag and modified binders	220-233
Brooks, Adam L. / Zhou, Hongyu / Hanna, Dominic	Comparative study of the mechanical and thermal properties of lightweight cementitious composites	316-328
Cui, Zhen / Alipour, Alice	Concrete cover cracking and service life prediction of reinforced concrete structures in corrosive environments	652-671
Nian, Tengfei / Li, Ping / Mao, Yu / Zhang, Guohong / Liu, Yang	Connections between chemical composition and rheology of aged base asphalt binders during repeated freeze-thaw cycles	338-350
Chen, Peiyuan / Wang, Jialai / Liu, Fengjuan / Qian, Xin / Xu, Ying / Li, Jin	Converting hollow fly ash into admixture carrier for concrete	431-439
Arshad, Muhammad	Correlation between resilient modulus (M) and constrained modulus (M) values of granular materials	440-450
Tian, Ye / Jin, Nanguo / Jin, Xianyu	Coupling effect of temperature and relative humidity diffusion in concrete under ambient conditions	673-689
Ez-zaki, H. / El Gharbi, B. / Diouri, A.	Development of eco-friendly mortars incorporating glass and shell powders	198-204
Majhi, R. K. / Nayak, A. N. / Mukharjee, B. B.	Development of sustainable concrete using recycled coarse aggregate and ground granulated blast furnace slag	417-430
Lee, Han Seung / Balasubramanian, B. / Gopalakrishna, G. V. T. / Kwon, Seung-Jun / Karthick, S. P. / Saraswathy, V.	Durability performance of CNT and nanosilica admixed cement mortar	463-472
Liu, Hongying / Chen, Zhijun / Wang, Yongdan / Zhang, Zhenxing / Hao, Peiwen	Effect of poly phosphoric acid (PPA) on creep response of base and polymer modified asphalt binders/mixtures at intermediate-low temperature	329-337
Gonzalez, A. / Norambuena-Contreras, J. / Storey, L. / Schlangen, E.	Effect of RAP and fibers addition on asphalt mixtures with self-healing properties gained by microwave radiation heating	164-174
Hu, Jinxuan / Wu, Shaopeng / Liu, Quantao / García Hernández, Maria Inmaculada / Wang, Zengfeng / Nie, Shuai / Zhang, Guofu	Effect of ultraviolet radiation in different wavebands on bitumen	479-485
Gupta, Souradeep / Kua, Harn Wei	Effect of water entrainment by pre-soaked biochar particles on strength and permeability of cement mortar	107-125
Chaturabong, Preeda / Lim, T. T. / Wong, Y. D.	Effective surface treatment techniques for refinishing oil-stained road surface	64-72
Akca, Abdullah Huzeyfe / Ozyurt, Nilufer	Effects of re-curing on residual mechanical properties of concrete after high temperature exposure	540-552
Zhang, Hongliang / Gao, Yang / Guo, Guihong / Zhao, Baojun / Yu, Jinyang	Effects of ZnO particle size on properties of asphalt and asphalt mixture	578-586
Gu, Fan / Luo, Xue / West, Randy C. / Taylor, Adam J. / Moore, Nathan D.	Energy-based crack initiation model for load-related top-down cracking in asphalt pavement	587-597
Mneina, A. / Soliman, A. M. / Ahmed, A. / El Naggar, M. H.	Engineering properties of Controlled Low-Strength Materials containing Treated Oil Sand Waste	277-285
Iordachescu, M. / Valiente, A. / Pérez-Guerrero, M. / Elices, M.	Environment-assisted failure of structural tendons for construction and building applications	499-507
Rooholamini, H. / Hassani, A. / Aliha, M. R. M.	Evaluating the effect of macro-synthetic fibre on the mechanical properties of roller-compacted concrete pavement using response surface methodology	517-529
Gao, Lei / Li, Hua / Xie, Jianguang / Yu, Zengbing / Charmot, Stephane	Evaluation of pavement performance for reclaimed asphalt materials in different layers	561-566
Ge, Wen-Jie / Ashour, Ashraf F. / Ji, Xiang / Cai, Chen / Cao, Da-fu	Flexural behavior of ECC-concrete composite beams reinforced with steel bars	175-188
Gao, Danying / Zhang, Lijuan	Flexural performance and evaluation method of steel fiber reinforced recycled coarse aggregate concrete	126-136
Strigáč, Július / Števulová, Nadežda / Mikušinec, Jozef / Sobolev, Konstantin	The fungistatic properties and potential application of by-product fly ash from fluidized bed combustion	351-360
Croymans, Tom / Leonardi, Federica / Trevisi, Rosabianca / Nuccetelli, Cristina / Schreurs, Sonja / Schroeyers, Wouter	Gamma exposure from building materials – A dose model with expanded gamma lines from naturally occurring radionuclides applicable in non-standard rooms	768-778
El Hafid, Kenza / Hajjaji, Mohamed	Geopolymerization of glass- and silicate-containing heated clay	598-609
Williams, Joseph / Lawrence, Mike / Walker, Pete	The influence of constituents on the properties of the bio-aggregate composite hemp-lime	9-17
Lu, Jinshan / Li, Yingde / Cong, Xinquan / Hao, Yong / Wang, Chunlei	Influence of different reinforcements on toughening and strengthening of sintered stoneware from modified marble powder	99-106
Varona, F. B. / Baeza, F. J. / Bru, D. / Ivorra, S.	Influence of high temperature on the mechanical properties of hybrid fibre reinforced normal and high strength concrete	73-82
Gong, Jianqing / Zeng, Wei / Zhang, Wenjie	Influence of shrinkage-reducing agent and polypropylene fiber on shrinkage of ceramsite concrete	155-163
Yang, Jianming / Lu, Jingwen / Wu, Qisheng / Xia, Ming Feng / Li, Xiaohua	Influence of steel slag powders on the properties of MKPC paste	137-146
Ercoli, M. / Di Matteo, L. / Pauselli, C. / Mancinelli, P. / Frapiccini, S. / Talegalli, L. / Cannata, A.	Integrated GPR and laboratory water content measures of sandy soils: From laboratory to field scale	734-744
Oldham, Daniel / Hung, Albert / Parast, Mahour M. / Fini, Ellie H.	Investigating bitumen rejuvenation mechanisms using a coupled rheometry-morphology characterization approach	37-45
Singh, Dharamveer / Maheshwari, Saurabh / Zaman, Musharraf / Commuri, Sesh	Kernel machines and firefly algorithm based dynamic modulus prediction model for asphalt mixes considering aggregate morphology	408-416
Zhang, Hongliang / Zhang, Gaowang / Han, Feifei / Zhang, Zengping / Lv, Wenjiang	A lab study to develop a bridge deck pavement using bisphenol A unsaturated polyester resin modified asphalt mixture	83-98
Saleem, Shahzad / Pimanmas, Amorn / Rattanapitikon, Winyu	Lateral response of PET FRP-confined concrete	390-407
Chen, Zeng-shun / Zhou, Xiao / Wang, Xu / Guo, Peng	Mechanical behavior of multilayer GO carbon-fiber cement composites	205-212
Mohammed, Bashar S. / Adamu, Musa	Mechanical performance of roller compacted concrete pavement containing crumb rubber and nano silica	234-251
Xu, Jinxia / Cao, Yalong / Jiang, Linhua / Feng, Wei / Song, Yingbin / Shan, Hongyou	Microstructure and pressure-sensitive properties of cement-based composite with Ni nanowires	46-53
Asghari, Azadeh A. / Feys, Dimitri / De Schutter, Geert	Mix design factors of self-consolidating cement paste affecting the magnitude of variations in rheological properties induced by the addition time of PCE-superplasticizer	269-276
Alrashydah, Esra'a I. / Abo-Qudais, Saad A.	Modeling of creep compliance behavior in asphalt mixes using multiple regression and artificial neural networks	635-641
Li, Ying / Li, Weiguo / Zhang, Xianhe / Ma, Jianzuo / Shao, Jiaxing / Kou, Haibo / Deng, Yong	Modeling of temperature dependent yield strength for stainless steel considering nonlinear behavior and the effect of phase transition	147-154
Qi, Chongchong / Fourie, Andy / Chen, Qiusong	Neural network and particle swarm optimization for predicting the unconfined compressive strength of cemented paste backfill	473-478
Schroeyers, Wouter / Sas, Zoltan / Bator, Gergo / Trevisi, Rosabianca / Nuccetelli, Cristina / Leonardi, Federica / Schreurs, Sonja / Kovacs, Tibor	The NORM4Building database, a tool for radiological assessment when using by-products in building materials	755-767
Al-Kutti, Walid / Nasir, Muhammad / Megat Johari, Megat Azmi / Islam, A. B. M. Saiful / Manda, Abdullah A. / Blaisi, Nawaf I.	An overview and experimental study on hybrid binders containing date palm ash, fly ash, OPC and activator composites	567-577
Govaerts, Yves / Hayen, Roald / de Bouw, Michael / Verdonck, Ann / Meulebroeck, Wendy / Mertens, Stijn / Grégoire, Yves	Performance of a lime-based insulating render for heritage buildings	376-389
Jadooe, Awad / Al-Mahaidi, Riadh / Abdouka, Kamiran	Performance of heat-damaged partially-insulated RC beams strengthened with NSM CFRP strips and epoxy adhesive	617-634
Wang, Yuanzhan / Wu, Linjian / Wang, Yuchi / Li, Qingmei / Xiao, Zhong	Prediction model of long-term chloride diffusion into plain concrete considering the effect of the heterogeneity of materials exposed to marine tidal zone	297-315
Dang, Canh N. / Hale, W. Micah / Martí-Vargas, J. R.	Quantification of bond performance of 18-mm prestressing steel	451-462
Alonso, M. M. / Pasko, A. / Gasco, C. / Suárez, J. A. / Kovalchuk, O. / Krivenko, P. / Puertas, F.	Radioactivity and Pb and Ni immobilization in SCM-bearing alkali-activated matrices	745-754
Laycock, Elizabeth Anne / Jefferson, David / Hetherington, Steven / Clegg, Francis / Wood, Christopher	Revitalising Collyweston limestone slate production by artificial freeze/thaw splitting	486-498
Oh, Sungwoo / Choi, Young Cheol	Superabsorbent polymers as internal curing agents in alkali activated slag mortars	1-8
Li, Ying-Lei / Zhao, Xiao-Ling / Singh Raman, R. K. / Al-Saadi, Saad	Thermal and mechanical properties of alkali-activated slag paste, mortar and concrete utilising seawater and sea sand	704-724
Irshidat, Mohammad R. / Al-Saleh, Mohammed H.	Thermal performance and fire resistance of nanoclay modified cementitious materials	213-219
Jin, Xianyu / Tong, Jing / Tian, Ye / Jin, Nanguo	Time-varying relative displacement field on the surface of concrete cover caused by reinforcement corrosion based on DIC measurement	695-703
Yue, Yanfei / Wang, Jing Jing / Bai, Yun	Tracing the status of silica fume in cementitious materials with Raman microscope	610-616
Zhang, Shunquan / Zhang, Yamei / Li, Zongjin	Ultrasonic monitoring of setting and hardening of slag blended cement under different curing temperatures by using embedded piezoelectric transducers	553-560
Wang, Lei / Yu, Iris K. M. / Tsang, Daniel C. W. / Yu, Kequan / Li, Shuang / Poon, Chi Sun / Dai, Jian-Guo	Upcycling wood waste into fibre-reinforced magnesium phosphate cement particleboards	54-63
Zhang, Minte / Chen, Chen / Mao, Linqiang / Wu, Qing	Use of electroplating sludge in production of fired clay bricks: Characterization and environmental risk evaluation	27-36
Lee, Nam Kon / Abate, Selamu Yihune / Kim, Hyeong-Ki	Use of recycled aggregates as internal curing agent for alkali-activated slag system	286-296
Topini, Dario / Toraldo, Emanuele / Andena, Luca / Mariani, Edoardo	Use of recycled fillers in bituminous mixtures for road pavements	189-197
Jin, Liangxing / Song, Weimin / Shu, Xiang / Huang, Baoshan	Use of water reducer to enhance the mechanical and durability properties of cement-treated soil	690-694
Jang, Jeong Gook / Park, Sol-Moi / Chung, Sangho / Ahn, Ji-Whan / Kim, Hyeong-Ki	Utilization of circulating fluidized bed combustion ash in producing controlled low-strength materials with cement or sodium carbonate as activator	642-651

Informations
sur cette fiche
IssueID
35504
Publié(e) le:
12.12.2019
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - janvier 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - janvier 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.