Construction and Building Materials - avril 2018

Publié:	avril 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Reches, Yonathan / Thomson, Kate / Helbing, Marne / Kosson, David S. / Sanchez, Florence	Agglomeration and reactivity of nanoparticles of SiO 2 , TiO 2 , Al 2 O 3 , Fe 2 O 3 , and clays in cement pastes and effects on compressive strength at ambient and elevated temperatures	860-873
Zhang, Yangyang / Chang, Jun / Ji, Juan	AH 3 phase in the hydration product system of AFt-AFm-AH 3 in calcium sulfoaluminate cements: A microstructural study	587-596
Phua, Y. J. / Røyne, A.	Bio-cementation through controlled dissolution and recrystallization of calcium carbonate	657-668
Gupta, Souradeep / Kua, Harn Wei / Pang, Sze Dai	Biochar-mortar composite: Manufacturing, evaluation of physical properties and economic viability	874-889
Qin, Jihui / Qian, Jueshi / You, Chao / Fan, Yingru / Li, Zhen / Wang, Hongtao	Bond behavior and interfacial micro-characteristics of magnesium phosphate cement onto old concrete substrate	166-176
Lu, Yiyan / Liu, Zhenzhen / Li, Shan / Tang, Wenshui	Bond behavior of steel-fiber-reinforced self-stressing and self-compacting concrete-filled steel tube columns for a period of 2.5 years	33-43
Althoey, Fadi / Wisner, Brian / Kontsos, Antonios / Farnam, Yaghoob	Cementitious materials exposed to high concentration of sodium chloride solution: Formation of a deleterious chemical phase change	543-552
Pang, Xueyu / Singh, John / Cuello Jimenez, Walmy	Characterizing gas bubble size distribution of laboratory foamed cement using X-ray micro-CT	243-252
Torbati-Sarraf, H. / Poursaee, A.	Corrosion of coupled steels with different microstructures in concrete environment	680-687
Wendling, Arthur / Sadhasivam, Kavitha / Floyd, Royce W.	Creep and shrinkage of lightweight self-consolidating concrete for prestressed members	205-215
Matos, Ana Mafalda / Maia, Lino / Nunes, Sandra / Milheiro-Oliveira, Paula	Design of self-compacting high-performance concrete: Study of mortar phase	617-630
Ali Omar, Hend / Yusoff, Nur Izzi Md. / Ceylan, Halil / Rahman, Irman Abdul / Sajuri, Zainuddin / Jakarni, Fauzan Mohd / Ismail, Amiruddin	Determining the water damage resistance of nano-clay modified bitumens using the indirect tensile strength and surface free energy methods	391-402
Kaseer, Fawaz / Yin, Fan / Arámbula-Mercado, Edith / Martin, Amy Epps / Daniel, Jo Sias / Salari, Saman	Development of an index to evaluate the cracking potential of asphalt mixtures using the semi-circular bending test	286-298
Zhu, Honggang / Wan, Kai Tai / Satekenova, Elnara / Zhang, Dichuan / Leung, Christopher K. Y. / Kim, Jong	Development of lightweight strain hardening cementitious composite for structural retrofit and energy efficiency improvement of unreinforced masonry housings	791-812
Yaseri, Sajad / Mahdikhani, Mahdi / Jafarinoor, Ashkan / Masoomi Verki, Vajihollah / Esfandyari, Mostafa / Ghiasian, Seyed Mohsen	The development of new empirical apparatuses for evaluation fresh properties of self-consolidating mortar: Theoretical and experimental study	631-648
Du, Hongjian / Pang, Sze Dai	Dispersion and stability of graphene nanoplatelet in water and its influence on cement composites	403-413
Tang, P. / Brouwers, H. J. H.	The durability and environmental properties of self-compacting concrete incorporating cold bonded lightweight aggregates produced from combined industrial solid wastes	271-285
Zhang, Shupeng / Xu, Xiaoxiao / Memon, Shazim Ali / Dong, Zhijun / Li, Dongxu / Cui, Hongzhi	Effect of calcium sulfate type and dosage on properties of calcium aluminate cement-based self-leveling mortar	253-262
Xuan, Dongxing / Tang, Pei / Poon, Chi Sun	Effect of casting methods and SCMs on properties of mortars prepared with fine MSW incineration bottom ash	890-898
Liu, Baoju / Luo, Guo / Xie, Youjun	Effect of curing conditions on the permeability of concrete with high volume mineral admixtures	359-371
Barluenga, Gonzalo / Guardia, Cynthia / Puentes, Javier	Effect of curing temperature and relative humidity on early age and hardened properties of SCC	235-242
Kumar, Puneet / Srivastava, Gaurav	Effect of fire on in-plane and out-of-plane behavior of reinforced concrete frames with and without masonry infills	82-95
Koohmishi, Mehdi / Palassi, Massoud	Effect of gradation of aggregate and size of fouling materials on hydraulic conductivity of sand-fouled railway ballast	514-523
Wang, Jinbang / Zhou, Tongtong / Xu, Dongyu / Zhou, Zonghui / Du, Peng / Xie, Ning / Cheng, Xin / Liu, Yu	Effect of nano-silica on the efflorescence of waste based alkali-activated inorganic binder	381-390
Chen, Xiao / Zhu, Guorui / Zhou, Mingkai / Wang, Jie / Chen, Qian	Effect of Organic Polymers on the Properties of Slag-based Geopolymers	216-224
Salih, S. / Gómez-Meijide, B. / Aboufoul, M. / Garcia, A.	Effect of porosity on infrared healing of fatigue damage in asphalt	716-725
Assi, Lateef N. / Eddie Deaver, Edward / Ziehl, Paul	Effect of source and particle size distribution on the mechanical and microstructural properties of fly Ash-Based geopolymer concrete	372-380
Yang, Jingbin / Li, Dongxu / Fang, Yuan	Effect of synthetic CaO-Al 2 O 3 -SiO 2 -H 2 O on the early-stage performance of alkali-activated slag	65-72
Chen, Jiaxin / Chouw, Nawawi	Effect of the interface condition on the bond between flax FRP tube and coconut fibre reinforced concrete composites	597-604
Nosetti, Adrián / Pérez-Madrigal, Domingo / Pérez-Jiménez, Félix / Martìnez, Adriana H.	Effect of the recycling process and binder type on bituminous mixtures with 100% reclaimed asphalt pavement	440-448
Fazli, Hamed / Mohd Yassin, A. Y. / Shafiq, Nasir / Teo, Wee	Effective bond length of CFRP sheets externally bonded to concrete beams under marine environment	726-738
Bayat, A. / Hassani, A. / Yousefi, A. A.	Effects of red mud on the properties of fresh and hardened alkali-activated slag paste and mortar	775-790
Li, Dawang / Chen, Bin / Sun, Hongfang / Memon, Shazim Ali / Deng, Xiangbin / Wang, Yaocheng / Xing, Feng	Evaluating the effect of external and internal factors on carbonation of existing concrete building structures	73-81
Ferrara, Liberato / Van Mullem, Tim / Alonso, Maria Cruz / Antonaci, Paola / Borg, Ruben Paul / Cuenca, Estefanía / Jefferson, Anthony / Ng, Pui-Lam / Peled, Alva / Roig-Flores, Marta / Sanchez, Mercedes / Schroefl, Christof / Serna, Pedro / Snoeck, Didier / Tulliani, Jean Marc / De Belie, Nele	Experimental characterization of the self-healing capacity of cement based materials and its effects on the material performance: A state of the art report by COST Action SARCOS WG2	115-142
Ren, Xin / Zhang, Lianyang	Experimental study of interfacial transition zones between geopolymer binder and recycled aggregate	749-756
Sheng, Peiyao / Zhang, Jizhi / Ji, Zhong / Wang, Shizhao	FEM simulation and optimization on the elastic modulus and thermal expansion ratio of polymer-mineral composite	524-535
Alsubari, Belal / Shafigh, Payam / Ibrahim, Zainah / Jumaat, Mohd Zamin	Heat-treated palm oil fuel ash as an effective supplementary cementitious material originating from agriculture waste	44-54
Zhu, Ji-Hua / Su, Mei-Ni / Huang, Jia-yi / Ueda, Tamon / Xing, Feng	The ICCP-SS technique for retrofitting reinforced concrete compressive members subjected to corrosion	669-679
Li, Dawang / Wei, Ren / Xing, Feng / Sui, Lili / Zhou, Yingwu / Wang, Wenyu	Influence of Non-uniform corrosion of steel bars on the seismic behavior of reinforced concrete columns	20-32
Wang, Yishan / Zuo, Yu / Tang, Yuming	Inhibition effect and mechanism of sodium oleate on passivation and pitting corrosion of steel in simulated concrete pore solution	197-204
Zhang, Junzhi / Zhao, Jing / Zhang, Yurong / Gao, Yanhong / Zheng, Yingying	Instantaneous chloride diffusion coefficient and its time dependency of concrete exposed to a marine tidal environment	225-234
Pahlavan, Lotfollah / Zhang, Fengqiao / Blacquière, Gerrit / Yang, Yuguang / Hordijk, Dick	Interaction of ultrasonic waves with partially-closed cracks in concrete structures	899-906
Motevalizadeh, Seyed Mohsen / Ayar, Pooyan / Motevalizadeh, Seyed Hossein / Yeganeh, Sadegh / Ameri, Mahmoud / bemana, Keyvan	Investigating the impact of different loading patterns on the permanent deformation behaviour in hot mix asphalt	707-715
Zhu, Chongzheng / Zhang, Henglong / Xu, Guoqing / Wu, Chaofan	Investigation of the aging behaviors of multi-dimensional nanomaterials modified different bitumens by Fourier transform infrared spectroscopy	536-542
Wang, Chao / Xue, Lei / Xie, Wei / You, Zhanping / Yang, Xu	Laboratory investigation on chemical and rheological properties of bio-asphalt binders incorporating waste cooking oil	348-358
Tanyildizi, Harun	Long-term performance of the healed mortar with polymer containing phosphazene after exposed to sulfate attack	473-481
Jiang, Guanzhao / Wu, Aixiang / Wang, Yiming / Lan, Wentao	Low cost and high efficiency utilization of hemihydrate phosphogypsum: Used as binder to prepare filling material	263-270
Al-mashhadani, Mukhallad M. / Canpolat, Orhan / Aygörmez, Yurdakul / Uysal, Mucteba / Erdem, Savaş	Mechanical and microstructural characterization of fiber reinforced fly ash based geopolymer composites	505-513
Mahdikhani, Mahdi / Bamshad, Omid / Fallah Shirvani, Mohammad	Mechanical properties and durability of concrete specimens containing nano silica in sulfuric acid rain condition	929-935
Bołtryk, Michał / Krupa, Anna / Pawluczuk, Edyta	Modification of the properties of the cement composites with the organic filler	143-153
Islam, Mohammad S. / Ghafoori, Nader	A new approach to evaluate alkali-silica reactivity using loss in concrete stiffness	578-586
Kourkoulis, S. K. / Pasiou, E. D. / Dakanali, I. / Stavrakas, I. / Triantis, D.	Notched marble plates under direct tension: Mechanical response and fracture	426-439
van Zijl, Gideon P. A. G. / Chandra Paul, Suvash	A novel link of the time scale in accelerated chloride-induced corrosion test in reinforced SHCC	15-19
Fatehi, Hadi / Abtahi, Sayyed Mahdi / Hashemolhosseini, Hamid / Hejazi, Sayyed Mahdi	A novel study on using protein based biopolymers in soil strengthening	813-821
Orlik-Kożdoń, Bożena / Nowoświat, Artur / Krause, Paweł / Ponikiewski, Tomasz	A numerical and experimental investigation of temperature field in place of anchors in ETICS system	553-565
Mazzucco, G. / Pomaro, B. / Salomoni, V. A. / Majorana, C. E.	Numerical modelling of ellipsoidal inclusions	317-324
Clemon, L. M. / Zohdi, T. I.	On the tolerable limits of granulated recycled material additives to maintain structural integrity	846-852
Jafari, Khashayar / Tabatabaeian, Mojtaba / Joshaghani, Alireza / Ozbakkaloglu, Togay	Optimizing the mixture design of polymer concrete: An experimental investigation	185-196
Dong, You	Performance assessment and design of ultra-high performance concrete (UHPC) structures incorporating life-cycle cost and environmental impacts	414-425
Loh, K. / Gaylarde, C. C. / Shirakawa, M. A.	Photocatalytic activity of ZnO and TiO 2 ‘nanoparticles’ for use in cement mixes	853-859
Khalil, A. A. / Tawfik, A. / Hegazy, A. A.	Plaster composites modified morphology with enhanced compressive strength and water resistance characteristics	55-64
Papatzani, Styliani / Badogiannis, Efstratios G. / Paine, Kevin	The pozzolanic properties of inorganic and organomodified nano-montmorillonite dispersions	299-316
Shanbara, Hayder Kamil / Ruddock, Felicite / Atherton, William	Predicting the rutting behaviour of natural fibre-reinforced cold mix asphalt using the finite element method	907-917
Al-Jaberi, Zuhair / Myers, John J. / ElGawady, Mohamed A.	Pseudo-static cyclic loading comparison of reinforced masonry walls strengthened with FRCM or NSM FRP	482-495
Choi, Eunsoo / Mohammadzadeh, Behzad / Hwang, Jin-Ha / Kim, Woo Jin	Pullout behavior of superelastic SMA fibers with various end-shapes embedded in cement mortar	605-616
Fan, Chao / Miller, Sabbie A.	Reducing greenhouse gas emissions for prescribed concrete compressive strength	918-928
Chen, Anqi / Liu, Guoqiang / Zhao, Yongli / Li, Jing / Pan, Yuanyuan / Zhou, Jian	Research on the aging and rejuvenation mechanisms of asphalt using atomic force microscopy	177-184
Xu, Jing / Wang, Xianzhi	Self-healing of concrete cracks by use of bacteria-containing low alkali cementitious material	1-14
Wang, Yingbin / He, Xingyang / Su, Ying / Tan, Hongbo / Yang, Jin / Lan, Meng / Ma, Mengyang / Strnadel, Bohumír	Self-hydration characteristics of ground granulated blast-furnace slag (GGBFS) by wet-grinding treatment	96-105
Xiao, Yuanjie / Zheng, Keyang / Chen, Liuxin / Mao, Jianfeng	Shakedown analysis of cyclic plastic deformation characteristics of unbound granular materials under moving wheel loads	457-472
Saidi, Meriem / Cherif, Amel Soukaina / Zeghmati, Belkacem / Sediki, Ezeddine	Stabilization effects on the thermal conductivity and sorption behavior of earth bricks	566-577
Liu, Qiong / Gao, Rundong / Tam, Vivian W. Y. / Li, Wengui / Xiao, Jianzhuang	Strain monitoring for a bending concrete beam by using piezoresistive cement-based sensors	338-347
Perrot, A. / Rangeard, D. / Menasria, F. / Guihéneuf, S.	Strategies for optimizing the mechanical strengths of raw earth-based mortars	496-504
Abraham, Sarah Mariam / Ransinchung, G. D. R. N.	Strength and permeation characteristics of cement mortar with Reclaimed Asphalt Pavement Aggregates	700-706
Chanhoun, Marius / Padonou, Semiyou / Adjovi, Edmond Codjo / Olodo, Emmanuel / Doko, Valerie	Study of the implementation of waste wood, plastics and polystyrenes for various applications in the building industry	936-941
Yi, Cheng / Ma, Hongqiang / Zhu, Hongguang / Li, Weijian / Xin, Minglang / Liu, Yilei / Guo, Yongdong	Study on chloride binding capability of coal gangue based cementitious materials	649-656
Hao, Peiwen / Zhang, Mengya / Zhang, Qiang / Xu, Jinzhi / Dong, Shi	Study on evaluation method of mud-pumping of cement concrete bridge deck pavement	106-114
Pang, Bo / Zhang, Yunsheng / Liu, Guojian	Study on the effect of waterborne epoxy resins on the performance and microstructure of cement paste	831-845
Seco, A. / Omer, J. / Marcelino, S. / Espuelas, S. / Prieto, E.	Sustainable unfired bricks manufacturing from construction and demolition wastes	154-165
Ma, Xin / Tu, Ran / Ding, Chao / Zeng, Yi / Wang, Yang / Fang, Tingyong	Thermal and fire risk analysis of low pressure on building energy conservation material flexible polyurethane with various inclined facade constructions	449-456
Yang, Hyun-Min / Lee, Han-Seung / Yang, Keun-Hyeok / Ismail, Mohamed A. / Kwon, Seung-Jun	Time and cold joint effect on chloride diffusion in concrete containing GGBFS under various loading conditions	739-748
Bezerra, Luciano M. / Barbosa, Wallison C. S. / Bonilla, Jorge / Cavalcante, Otávio R. O.	Truss-type shear connector for composite steel-concrete beams	757-767
Lu, Tung-Hsuan / Chen, Ying-Liang / Shih, Pai-Haung / Chang, Juu-En	Use of basic oxygen furnace slag fines in the production of cementitious mortars and the effects on mortar expansion	768-774
Chen, Yixin / Yu, Jing / Leung, Christopher K. Y.	Use of high strength Strain-Hardening Cementitious Composites for flexural repair of concrete structures with significant steel corrosion	325-337
Huang, Kang-Shiun / Yang, Chung-Chia	Using RCPT determine the migration coefficient to assess the durability of concrete	822-830
Derikvand, Mohammad / Kotlarewski, Nathan / Lee, Michael / Jiao, Hui / Chan, Andrew / Nolan, Gregory	Visual stress grading of fibre-managed plantation Eucalypt timber for structural building applications	688-699

Informations
sur cette fiche
IssueID
35496
Publié(e) le:
12.12.2019
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - avril 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - avril 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.