Construction and Building Materials - juin 2018

Publié:	juin 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Ma, Shuqi / Zhao, Zhiye / Peng, Jun / Gui, Yilin	Analytical modeling of shear behaviors of rockbolts perpendicular to joints	286-295
Song, Fei / Wang, Huaning / Jiang, Mingjing	Analytically-based simplified formulas for circular tunnels with two liners in viscoelastic rock under anisotropic initial stresses	746-767
Tang, Fujian / Chen, Yizheng / Li, Zhaochao / Tang, Yan / Chen, Genda	Application of Fe-C coated LPFG sensor for early stage corrosion monitoring of steel bar in RC structures	14-25
Li, Shiyang / Huang, Xin / Wu, Shuaishuai / Tian, Jie / Zhang, Wuman	Bearing capacity of stabilized soil with expansive component confined by polyvinyl chloride pipe	307-320
Hung, Chung-Chan / Hu, Fuo-Yao	Behavior of high-strength concrete slender columns strengthened with steel fibers under concentric axial loading	422-433
Rith, Makara / Kim, Young Kyu / Lee, Seung Woo	Behavior of RCC-base composite pavement for heavy duty area	144-151
Younis, Adel / Ebead, Usama	Bond characteristics of different FRCM systems	610-620
Wang, Xue / Shen, Shihui / Huang, Hai / Almeida, Luiz Claudio	Characterization of particle movement in Superpave gyratory compactor at meso-scale using SmartRock sensors	206-214
Sun, Xiaolong / Qin, Xiao / Li, Shanqiang / Zou, Chao / Wang, Chaohui / Wang, Xuancang	Characterization of thermal insulating micro-surfacing modified by inorganic insulating material	296-306
Vipulanandan, C. / Amani, N.	Characterizing the pulse velocity and electrical resistivity changes in concrete with piezoresisitive smart cement binder using Vipulanandan models	519-530
Deng, Fangming / He, Yigang / Zhou, Shuangxi / Yu, Yun / Cheng, Haigen / Wu, Xiang	Compressive strength prediction of recycled concrete based on deep learning	562-569
Hussain, Raja Rizwan / Shuraim, Ahmed B. / Aslam, Fahid / Alhozaimy, Abdulrahman M. A. / Al-Humaiqani, Mohammed M.	Coupled effect of coarse aggregate and micro-silica on the relation between strength and elasticity of high performance concrete	321-332
Singh, Dharamveer / Mishra, Vinamra	Different methods of selecting probe liquids to measure the surface free energy of asphalt binders	448-457
Naija, Ahmed / Miled, Karim / Limam, Oualid	A discrete micromechanical model for predicting HSC compressive strength based on a yield design approach	714-725
Pereiro-Barceló, Javier / Bonet, José L. / Gómez-Portillo, Salvador / Castro-Bugallo, Carmen	Ductility of high-performance concrete and very-high-performance concrete elements with Ni-Ti reinforcements	531-551
El-Hassan, Hilal / El-Maaddawy, Tamer / Al-Sallamin, Abdelrahman / Al-Saidy, Abdullah	Durability of glass fiber-reinforced polymer bars conditioned in moist seawater-contaminated concrete under sustained load	1-13
Pourbaba, Masoud / Asefi, Elyar / Sadaghian, Hamed / Mirmiran, Amir	Effect of age on the compressive strength of ultra-high-performance fiber-reinforced concrete	402-410
Liu, Wenyao / Yan, Kezhen / Ge, Dongdong / Chen, Ming	Effect of APAO on the aging properties of waste tire rubber modified asphalt binder	333-341
Zhu, Xiaohong / Tang, Desha / Yang, Kai / Zhang, Zhilu / Li, Qing / Pan, Qun / Yang, Changhui	Effect of Ca(OH)2 on shrinkage characteristics and microstructures of alkali-activated slag concrete	467-482
Zhang, Xiao / Li, Guoxin / Niu, Mengdie / Song, Zhanping	Effect of calcium aluminate cement on water resistance and high-temperature resistance of magnesium-potassium phosphate cement	768-776
Norambuena-Contreras, J. / Yalcin, E. / Garcia, A. / Al-Mansoori, T. / Yilmaz, M. / Hudson-Griffiths, R.	Effect of mixing and ageing on the mechanical and self-healing properties of asphalt mixtures containing polymeric capsules	254-266
Wang, X. F. / Huang, Y. J. / Wu, G. Y. / Fang, C. / Li, D. W. / Han, N. X. / Xing, F.	Effect of nano-SiO2 on strength, shrinkage and cracking sensitivity of lightweight aggregate concrete	115-125
Safari, J. / Mirzaei, M. / Rooholamini, H. / Hassani, A.	Effect of rice husk ash and macro-synthetic fibre on the properties of self-compacting concrete	371-380
Hadi, Muhammad N. S. / Al-Azzawi, Mustafa / Yu, Tao	Effects of fly ash characteristics and alkaline activator components on compressive strength of fly ash-based geopolymer mortar	41-54
Huseien, Ghasan Fahim / Tahir, Mahmood Md. / Mirza, Jahangir / Ismail, Mohammad / Shah, Kwok Wei / Asaad, Mohammad Ali	Effects of POFA replaced with FA on durability properties of GBFS included alkali activated mortars	174-186
Franzoni, Elisa / Gentilini, Cristina / Santandrea, Mattia / Carloni, Christian	Effects of rising damp and salt crystallization cycles in FRCM-masonry interfacial debonding: Towards an accelerated laboratory test method	225-238
Li, Chao / Miao, Linchang / You, Quan / Hu, Shengkun / Fang, Huanglei	Effects of viscosity modifying admixture (VMA) on workability and compressive strength of structural EPS concrete	342-350
Narzary, Binanda Khungur / Ahamad, Kamal Uddin	Estimating elastic modulus of California bearing ratio test sample using finite element model	601-609
Liu, Shengjie / Zhou, Sheng Bo / Xu, Yinshan	Evaluation of cracking properties of SBS-modified binders containing organic montmorillonite	196-205
Liu, Chao / Lv, Zhenyuan / Bai, Guoliang / Yin, Yuguang	Experiment study on bond slip behavior between section steel and RAC in SRRC structures	104-114
Liu, L. / Fang, Z. Y. / Wu, Y. P. / Lai, X. P. / Wang, P. / Song, Ki-Il	Experimental investigation of solid-liquid two-phase flow in cemented rock-tailings backfill using Electrical Resistance Tomography	267-276
Youssf, Osama / Hassanli, Reza / Mills, Julie E. / Abd Elrahman, Mohamed	An experimental investigation of the mechanical performance and structural application of LECA-Rubcrete	239-253
Xu, Yi / Liu, Jiaping / Liu, Jianzhong / Zhang, Ping / Zhang, Qianqian / Jiang, Linhua	Experimental studies and modeling of creep of UHPC	643-652
Wang, Xiaoxiang / Chen, Zhihua / Liu, Hongbo / Yu, Yujie	Experimental study on stress relaxation properties of structural cables	777-789
Ren, Jingge / Lai, Yuanming / Gao, Jianqiang	Exploring the influence of SiO2 and TiO2 nanoparticles on the mechanical properties of concrete	277-285
Murthy, A. Ramachandra / Karihaloo, B. L. / Priya, D. Shanmuga	Flexural behavior of RC beams retrofitted with ultra-high strength concrete	815-824
Akono, Ange-Therese / Chen, Jiaxin / Kaewunruen, Sakdirat	Friction and fracture characteristics of engineered crumb-rubber concrete at microscopic lengthscale	735-745
Khoury, Eliane / Ambrós, Weslei / Cazacliu, Bogdan / Sampaio, Carlos Hoffmann / Remond, Sébastien	Heterogeneity of recycled concrete aggregates, an intrinsic variability	705-713
Eftekhari, Mehdi / Mohammadi, Soheil / Khanmohammadi, Mohammad	A hierarchical nano to macro multiscale analysis of monotonic behavior of concrete columns made of CNT-reinforced cement composite	134-143
Liu, Sai / Zhu, Deju / Ou, Yunfu / Yao, Yiming / Shi, Caijun	Impact response of basalt textile reinforced concrete subjected to different velocities and temperatures	381-391
Wang, Xuezheng / Gao, Wenyuan / Yan, Shuang / Niu, Meihong / Liu, Guishan / Hao, Hongshun	Incorporation of sand-based breathing bricks with foamed concrete and humidity control materials	187-195
Zhang, Wei / Yao, Xiao / Yang, Tao / Liu, Cun / Zhang, Zuhua	Increasing mechanical strength and acid resistance of geopolymers by incorporating different siliceous materials	411-421
Combrinck, Riaan / Steyl, Lourens / Boshoff, William Peter	Influence of concrete depth and surface finishing on the cracking of plastic concrete	621-628
Rashid, Khuram / Ahmad, Madiha / Tahir, Muhammad Akram	Influence of organic agents to compressive strength of cement mortar	434-438
Contreras, M. / Teixeira, S. R. / Santos, G. T. A. / Gázquez, M. J. / Romero, M. / Bolívar, J. P.	Influence of the addition of phosphogypsum on some properties of ceramic tiles	588-600
Ahmad, Tarique / Ahmad, Kafeel / Alam, Mehtab	Investigating calcined filter backwash solids as supplementary cementitious material for recycling in construction practices	664-671
Younis, Adel / Ebead, Usama / Judd, Simon	Life cycle cost analysis of structural concrete using seawater, recycled concrete aggregate, and GFRP reinforcement	152-160
Farzadnia, Nima / Bahmani, Sayed Hessam / Asadi, Afshin / Hosseini, Soraya	Mechanical and microstructural properties of cement pastes with rice husk ash coated with carbon nanofibers using a natural polymer binder	691-704
Mercedes, Luis / Gil, Lluís / Bernat-Maso, Ernest	Mechanical performance of vegetal fabric reinforced cementitious matrix (FRCM) composites	161-173
Shi, Gang / Gao, Yang / Wang, Xun / Zhang, Yong	Mechanical properties and constitutive models of low yield point steels	570-587
Huang, Yijie / He, Xujia / Wang, Qing / Sun, Yuedong	Mechanical properties of sea sand recycled aggregate concrete under axial compression	55-63
Azhari, Fatemeh / Hossain Apon, Al-Amin / Heidarpour, Amin / Zhao, Xiao-Ling / Hutchinson, Christopher R.	Mechanical response of ultra-high strength (Grade 1200) steel under extreme cooling conditions	790-803
Rodríguez-Mariscal, J. D. / Solís, M. / Cifuentes, H.	Methodological issues for the mechanical characterization of unfired earth bricks	804-814
Feng, Pan / Liu, Jiaping / She, Wei / Hong, Jinxiang	A model investigation of the mechanisms of external sulfate attack on portland cement binders	629-642
Zhang, Derun / Luo, Rong	Modifying the BET model for accurately determining specific surface area and surface energy components of aggregates	653-663
Ma, Xianyong / Dong, Zejiao / Yu, Xiong / Chen, Fengchen / Cao, Cheng / Sun, Jianjun	Monitoring the structural capacity of airfield pavement with built-in sensors and modulus back-calculation algorithm	552-561
Nazzal, Munir D. / Holcombe, Evan / Kim, Sang Soo / Abbas, Ala / Kaya, Savas	Multi-scale evaluation of the effect of ras on the fracture properties of asphalt mixtures	126-133
Reches, Yonathan	Nanoparticles as concrete additives: Review and perspectives	483-495
Sun, Daquan / Lu, Tong / Zhu, Xingyi / Li, Bin / Tian, Yang	Optimization of synthesis technology to improve the design of asphalt self-healing microcapsules	88-103
Ribeiro, A. Bettencourt / Santos, Tiago / Gonçalves, Arlindo	Performance of concrete exposed to natural carbonation: Use of the k-value concept	360-370
Latroch, Noureddine / Benosman, Ahmed Soufiane / Bouhamou, Nasr-Eddine / Senhadji, Yassine / Mouli, Mohamed	Physico-mechanical and thermal properties of composite mortars containing lightweight aggregates of expanded polyvinyl chloride	77-87
Hamada, Hussein M. / Jokhio, Gul Ahmed / Yahaya, Fadzil Mat / Humada, Ali M. / Gul, Yasmeen	The present state of the use of palm oil fuel ash (POFA) in concrete	26-40
Iqbal, N. / Sharma, P. K. / Kumar, D. / Roy, P. K.	Protective polyurea coatings for enhanced blast survivability of concrete	682-690
Maimouni, Houda / Remond, Sébastien / Huchet, Florian / Richard, Patrick / Thiéry, Vincent / Descantes, Yannick	Quantitative assessment of the saturation degree of model fine recycled concrete aggregates immersed in a filler or cement paste	496-507
Chang, Che Way / Lin, Chen Hua / Yuan, Qi-Wang	Quantitative study of electromagnetic wave characteristic values for mortar’s crack	351-359
Yu, Zhuqing / Ni, Chenxin / Tang, Mingliang / Shen, Xiaodong	Relationship between water permeability and pore structure of Portland cement paste blended with fly ash	458-466
de Matos, Paulo Ricardo / de Oliveira, Alexandre Lima / Pelisser, Fernando / Prudêncio Jr, Luiz Roberto	Rheological behavior of Portland cement pastes and self-compacting concretes containing porcelain polishing residue	508-518
Akiel, Mohammad S. / El-Maaddawy, Tamer / El Refai, Ahmed	Serviceability and moment redistribution of continuous concrete members reinforced with hybrid steel-BFRP bars	672-681
Hassine, Mohamed Ahmed / Beck, Kévin / Brunetaud, Xavier / Al-Mukhtar, Muzahim	Strain measurements during capillary water infiltration in porous limestones	439-447
Bentz, Dale P. / Jones, Scott Z. / Bentz, Isaiah R. / Peltz, Max A.	Towards the formulation of robust and sustainable cementitious binders for 3-D additive construction by extrusion	215-224
Li, Jing / Zhuang, Xinguo / Monfort, Eliseo / Querol, Xavier / Llaudis, Alejandro Saburit / Font, Oriol / Moreno, Natalia / Ten, Francisco Javier García / Izquierdo, Maria	Utilization of coal fly ash from a Chinese power plant for manufacturing highly insulating foam glass: Implications of physical, mechanical properties and environmental features	64-76
Ma, Baoguo / Liu, Xiaohai / Tan, Hongbo / Zhang, Ting / Mei, Junpeng / Qi, Huahui / Jiang, Wenbing / Zou, Fubing	Utilization of pretreated fly ash to enhance the chloride binding capacity of cement-based material	726-734
Yu, Huayang / Leng, Zhen / Dong, Zejiao / Tan, Zhifei / Guo, Feng / Yan, Jinhai	Workability and mechanical property characterization of asphalt rubber mixtures modified with various warm mix asphalt additives	392-401

Informations
sur cette fiche
IssueID
35490
Publié(e) le:
12.12.2019
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - juin 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - juin 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.