Construction and Building Materials - décembre 2019

Publié:	décembre 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Cui, Peide / Wu, Shaopeng / Xiao, Yue / Niu, Yunya / Yuan, Gaoming / Lin, Juntao	3D reconstruction of moisture damage resulted volumetric changes in porous asphalt mixture	116658
Gholampour, Aliakbar / Ozbakkaloglu, Togay / Ng, Ching-Tai	Ambient- and oven-cured geopolymer concretes under active confinement	116722
Ali, Hatim / Mohamed, Mostafa	Assessment of lime treatment of expansive clays with different mineralogy at low and high temperatures	116955
Yan, Jia-Bao / Dong, Xin / Zhu, Jin-Song	Behaviours of stub steel tubular columns subjected to axial compression at low temperatures	116788
Omoregie, Armstrong I. / Palombo, Enzo A. / Ong, Dominic E. L. / Nissom, Peter M.	Biocementation of sand by Sporosarcina pasteurii strain and technical-grade cementation reagents through surface percolation treatment method	116828
Wu, Shuang / Wang, Wenlong / Ren, Changzai / Yao, Xingliang / Yao, Yonggang / Zhang, Qingsong / Li, Zhaofeng	Calcination of calcium sulphoaluminate cement using flue gas desulfurization gypsum as whole calcium oxide source	116676
Zhang, Ai / Ge, Yong / Yang, Wencui / Cai, Xiaoping / Du, Yuanbo	Comparative study on the effects of nano-SiO2, nano-Fe2O3 and nano-NiO on hydration and microscopic properties of white cement	116767
Xie, Yudong / Lin, Xujian / Ji, Tao / Liang, Yongning / Pan, Weijie	Comparison of corrosion resistance mechanism between ordinary Portland concrete and alkali-activated concrete subjected to biogenic sulfuric acid attack	117071
DeRousseau, M. A. / Laftchiev, E. / Kasprzyk, J. R. / Rajagopalan, B. / Srubar, W. V.	A comparison of machine learning methods for predicting the compressive strength of field-placed concrete	116661
Hou, Pengkun / Guo, Zhaoheng / Li, Qinfei / Zhang, Xiaofang / Liu, Jiaxin / Yang, Shuyao / Cheng, Xin / Kumar, Rajesh / Srinivasaraonaik, B. / Singh, L. P.	Comparison study on the sulfate attack resistivity of cement-based materials modified with nanoSiO2 and normal SCMs: Pore structure and phase composition	116764
Bakatovich, Aliaksandr / Gaspar, Florindo	Composite material for thermal insulation based on moss raw material	116699
Sánchez, Martha L. / Capote, G. / Carrillo, J.	Composites reinforced with Guadua fibers: Physical and mechanical properties	116749
Develioglu, Inci / Pulat, Hasan Firat	Compressibility behaviour of natural and stabilized dredged soils in different organic matter contents	116787
Zhang, Junjie / Tan, Hongbo / He, Xingyang / Yang, Wei / Deng, Xiufeng / Su, Ying / Yang, Jin	Compressive strength and hydration process of ground granulated blast furnace slag-waste gypsum system managed by wet grinding	116777
Wang, Jian / Zuo, Yingfeng / Xiao, Junhua / Li, Ping / Wu, Yiqiang	Construction of compatible interface of straw/magnesia lightweight materials by alkali treatment	116712
Feng, Jianhang / Su, Yilin / Qian, Chunxiang	Coupled effect of PP fiber, PVA fiber and bacteria on self-healing efficiency of early-age cracks in concrete	116810
Masum, A. T. M. / Manzur, Tanvir	Delaying time to corrosion initiation in concrete using brick aggregate as internal curing medium under adverse curing conditions	116772
zhou, Changlin / Zhu, Zheming / Zhu, Aijun / Zhou, Lei / Fan, Yong / Lang, Lin	Deterioration of mode II fracture toughness, compressive strength and elastic modulus of concrete under the environment of acid rain and cyclic wetting-drying	116809
Barazi Jomoor, Nariman / Fakhri, Mansour / Reza Keymanesh, Mahmoud	Determining the optimum amount of recycled asphalt pavement (RAP) in warm stone matrix asphalt using dynamic creep test	116736
Afgan, Sher / Khushnood, Rao Arsalan / Memon, Shazim Ali / Iqbal, Naseem	Development of structural thermal energy storage concrete using paraffin intruded lightweight aggregate with nano-refined modified encapsulation paste layer	116768
Akcay, Burcu / Ozsar, Dogac S.	Do polymer fibres affect the distribution of steel fibres in hybrid fibre reinforced concretes?	116732
Al-Kawari, M. S. / Hushari, M.	Doses and radiation risks estimation of adding steel slag to asphalt for road construction in Qatar	116741
Khalafalla, Omar / Pour-Ghaz, Mohammad / ElSafty, Adel / Rizkalla, Sami	Durability of CFRP strands used for prestressing of concrete structural members	116756
Subashi de Silva, G. H. M. J. / Hansamali, Eranka	Eco-friendly fired clay bricks incorporated with porcelain ceramic sludge	116754
Baomin, Wang / Shuang, Deng	Effect and mechanism of graphene nanoplatelets on hydration reaction, mechanical properties and microstructure of cement composites	116720
Huang, Lei / Yan, Peiyu	Effect of alkali content in cement on its hydration kinetics and mechanical properties	116833
Kirthika, S. K. / Surya, M. / Singh, S. K.	Effect of clay in alternative fine aggregates on performance of concrete	116811
Sasanipour, Hossein / Aslani, Farhad	Effect of specimen shape, silica fume, and curing age on durability properties of self-compacting concrete incorporating coarse recycled concrete aggregates	117054
Zou, Wei-Lie / Wan, Liang-long / Han, Zhong / Wang, Xie-Qun	Effect of stress history on compressive and rheological behaviors of EPS geofoam	116592
Chen, Chen / Jiang, Linhua / Guo, Ming-Zhi / Xu, Peng / Chen, Lei / Zha, Jie	Effect of sulfate ions on corrosion of reinforced steel treated by DNA corrosion inhibitor in simulated concrete pore solution	116752
Sikandar, Muhammad Ali / Ahmad, Waqas / Khan, Muhammad Hanif / Ali, Faryal / Waseem, Muhammad	Effect of water resistant SiO2 coated SrAl2O4: Eu2+ Dy3+ persistent luminescence phosphor on the properties of Portland cement pastes	116823
Şengün, E. / Alam, B. / Shabani, R. / Yaman, I. O.	The effects of compaction methods and mix parameters on the properties of roller compacted concrete mixtures	116807
Liu, Lang / Zhu, Chao / Qi, Chongchong / Wang, Mei / Huan, Chao / Zhang, Bo / Song, Ki-Il	Effects of curing time and ice-to-water ratio on performance of cemented paste backfill containing ice slag	116639
Ling, Yifeng / Wang, Kejin / Wang, Xuhao / Hua, Sudong	Effects of mix design parameters on heat of geopolymerization, set time, and compressive strength of high calcium fly ash geopolymer	116763
Tian, Hongwei / Kong, Xiangming / Cui, Yong / Wang, Qibao / Wang, Dongmin	Effects of polycarboxylate superplasticizers on fluidity and early hydration in sulfoaluminate cement system	116711
Wang, Wanyi / Song, Zijian / Guo, Mingzhi / Jiang, Linhua / Xiao, Beibei / Jiang, Quanguo / Chu, Hongqiang / Liu, Yongqi / Zhang, Yingjie / Xu, Na	Employing ginger extract as an eco-friendly corrosion inhibitor in cementitious materials	116713
Yang, Yu / Ji, Tao / Su, Wenyue / Kang, Yiqing / Wu, Yuhao / Zhang, Yong	Enhanced washing resistance of photocatalytic exposed aggregate cementitious materials based on g-C3N4 nanosheets-recycled asphalt pavement aggregate composites	116748
Chen, Qian / Wang, Chaohui / Sun, Xiaolong / Cao, Yangsen / Guo, Tengteng / Chen, Jiao	Evaluation and prediction for effect of conductive gussasphalt mixture on corrosion of steel bridge deck	116837
Wu, Haonan / Li, Ping / Nian, Tengfei / Zhang, Guohong / He, Teng / Wei, Xiying	Evaluation of asphalt and asphalt mixtures’ water stability method under multiple freeze-thaw cycles	117089
Yohana Ribas, Cristine / Padilha Thives, Liseane	Evaluation of effect of compaction method on the macrostructure of asphalt mixtures through digital image processing under Brazilian conditions	116821
Segura, Jorge / Pelà, Luca / Roca, Pere / Cabané, Albert	Experimental analysis of the size effect on the compressive behaviour of cylindrical samples core-drilled from existing brick masonry	116759
Li, Xin / Ashraf, Mahmud / Li, Haitao / Zheng, Xiaoyan / Wang, Hongxu / Al-deen, Safat / Hazell, Paul J.	An experimental investigation on Parallel Bamboo Strand Lumber specimens under quasi static and impact loading	116724
Liu, Fangyu / Ding, Wenqi / Qiao, Yafei	Experimental investigation on the flexural behavior of hybrid steel-PVA fiber reinforced concrete containing fly ash and slag powder	116706
Mandili, B. / Taqi, M. / El Bouari, A. / Errouaiti, M.	Experimental study of a new ecological building material for a thermal insulation based on waste paper and lime	117097
Cao, Guansen / Wang, Wensong / Yin, Guangzhi / Wei, Zuoan	Experimental study of shear wave velocity in unsaturated tailings soil with variant grain size distribution	116744
Zhang, Zhong-jian / Liu, Jian-bin / Li, Biao / Yu, Guo-xin / Li, Li	Experimental study on factors affecting the physical and mechanical properties of shell lime mortar	116726
Lai, Binglin / Liew, J. Y. Richard / Xiong, Mingxiang	Experimental study on high strength concrete encased steel composite short columns	116640
Li, Wenshuai / Shaikh, Faiz U. A. / Wang, Lianguo / Lu, Yinlong / Wang, Bin / Jiang, Chongyang / Su, Ya	Experimental study on shear property and rheological characteristic of superfine cement grouts with nano-SiO2 addition	117046
Qu, Xin / Li, Tianshuai / Wei, Jianming / Wang, Dawei / Oeser, Markus / Hao, Peiwen	Extraction of polycyclic aromatic compounds (PAC) and the influence on the mechanical and chemical properties of asphalt binder	116739
Jiang, Jun / Yang, Ying / Hou, Li / Lu, Zhongyuan / Li, Jun / Niu, Yunhui	Facile preparation and hardened properties of porous geopolymer-supported zeolite based on swelled bentonite	117040
Xie, Jian-he / Wei, Mu-Wang / Huang, Pei-yan / Zhang, Huan / Chen, Ping-Shan	Fatigue behavior of the basalt fiber-reinforced polymer/concrete interface under wet-dry cycling in a marine environment	117065
Dolinar, U. / Trtnik, G. / Turk, G. / Hozjan, T.	The feasibility of estimation of mechanical properties of limestone concrete after fire using nondestructive methods	116786
Tsangouri, Eleni / Lelon, Jordy / Minnebo, Pieter / Asaue, Hisafumi / Shiotani, Tomoki / Van Tittelboom, Kim / De Belie, Nele / Aggelis, Dimitrios G. / Van Hemelrijck, Danny	Feasibility study on real-scale, self-healing concrete slab by developing a smart capsules network and assessed by a plethora of advanced monitoring techniques	116780
Behera, Monalisa / Minocha, A. K. / Bhattacharyya, S. K.	Flow behavior, microstructure, strength and shrinkage properties of self-compacting concrete incorporating recycled fine aggregate	116819
Lu, Qing / Qiu, Qingli / Zheng, Jun / Wang, Jiyang / Zeng, Qiang	Fractal dimension of concrete incorporating silica fume and its correlations to pore structure, strength and permeability	116986
Khater, H. M.	Hybrid slag geopolymer composites with durable characteristics activated by cement kiln dust	116708
Xu, Chengwen / Ni, Wen / Li, Keqing / Zhang, Siqi / Li, Ying / Xu, Dong	Hydration mechanism and orthogonal optimisation of mix proportion for steel slag–slag-based clinker-free prefabricated concrete	117036
Zhang, Yanrong / Cai, Xiaopei / Gao, Liang / Wu, Kai	Improvement on the mechanical properties of CA mortar and concrete composite specimens in high-speed railway by modification of interlayer bonding	116758
Ševčík, Radek / Mácová, Petra / Estébanez, Marta Pérez / Viani, Alberto	Influence of additions of synthetic anhydrous calcium carbonate polymorphs on nanolime carbonation	116802
Ali, Babar / Qureshi, Liaqat Ali	Influence of glass fibers on mechanical and durability performance of concrete with recycled aggregates	116783
Zhu, Chongzheng / Zhang, Henglong / Zhang, Yingchun	Influence of layered silicate types on physical, rheological and aging properties of SBS modified asphalt with multi-dimensional nanomaterials	116735
Ranjbarian, Majid / Mechtcherine, Viktor	Influence of loading parameters in cyclic tension-compression regime on crack-bridging behaviour of PVA microfibres embedded in cement-based matrix	116760
Vardhan, Kirti / Siddique, Rafat / Goyal, Shweta	Influence of marble waste as partial replacement of fine aggregates on strength and drying shrinkage of concrete	116730
Choudhary, Ankush / Kumar, Manoj / Unune, Deepak Rajendra	Influence of novel water cooled ASAW process on chemical composition and impact toughness of AISI 1023 weld metal	116725
Xiong, Houren / Yuan, Kelong / Wen, Minjie / Yu, Anni / Xu, Jinming	Influence of pore structure on the moisture transport property of external thermal insulation composite system as studied by NMR	116815
Yang, Zhiqiang / Jiang, Jinyang / Jiang, Xing / Mu, Song / Wu, Meng / Sui, Shiyu / Wang, Liguo / Wang, Fengjuan	The influence of sodium sulfate and magnesium sulfate on the stability of bound chlorides in cement paste	116775
Shen, Dejian / Li, Chengcai / Feng, Zhizhuo / Wen, Chuyuan / Ojha, Binod	Influence of strain rate on bond behavior of concrete members reinforced with basalt fiber-reinforced polymer rebars	116755
John, Elisabeth / Epping, Jan Dirk / Stephan, Dietmar	The influence of the chemical and physical properties of C-S-H seeds on their potential to accelerate cement hydration	116723
Gečys, Tomas / Bader, Thomas K. / Olsson, Anders / Kajėnas, Simonas	Influence of the rope effect on the slip curve of laterally loaded, nailed and screwed timber-to-timber connections	116702
Dang, Juntao / Zhao, Jun	Influence of waste clay bricks as fine aggregate on the mechanical and microstructural properties of concrete	116757
Tabatabaeian, Mojtaba / Khaloo, Alireza / Khaloo, Hooman	An innovative high performance pervious concrete with polyester and epoxy resins	116820
Ahmad, Faiz / Ullah, Sami / Merican, Nurul Haswina bt H. / Oñate, Eugenio / Al-Sehemi, Abdullah G. / Yeoh, Guan Heng	An investigation on thermal performance of wollastonite and bentonite reinforced intumescent fire-retardant coating for steel structures	116734
Jiang, Xiuming / Li, Peilong / Ding, Zhan / Yang, Liangdong / Zhao, Junkai	Investigations on viscosity and flow behavior of polyphosphoric acid (PPA) modified asphalt at high temperatures	116610
Jiang, Yongjia / Han, Xiaocheng / Gong, Jie / Xi, Zhonghua / Cai, Jun / Wang, Qingjun / Ding, Guowei / Xie, Hongfeng	Laboratory investigation of epoxy asphalt binder modified by brominated SBS	116733
Liao, Weizhang / Wang, Hongwei / Li, Miao / Ma, Chao / Wang, Bo	Large scale experimental study on bond behavior between polymer modified cement mortar layer and concrete	116751
Mastori, H. / Piluso, P. / Haquet, J.-F. / Denoyel, R. / Antoni, M.	Limestone-siliceous and siliceous concretes thermal damaging at high temperature	116671
Gentile, Carmelo / Ruccolo, Antonello / Canali, Francesco	Long-term monitoring for the condition-based structural maintenance of the Milan Cathedral	117101
Loporcaro, Giuseppe / Pampanin, Stefano / Kral, Milo V.	Long-term strain-ageing effects on low-carbon steel reinforcement	116606
Liu, Sai / Rawat, Prashant / Wang, Xuan / Zhu, Deju	Low velocity impact behavior of AR-glass textile reinforced mortar under varying range of loading and temperatures	116773
Cheng, Xiaowei / Dong, Qingguang / Ma, Yong / Zhang, Chi / Gao, Xianshu / Yu, Yongjin / Wen, Zhaijun / Zhang, Chunmei / Guo, Xiaoyang	Mechanical and thermal properties of aluminate cement paste with blast furnace slag at high temperatures	116747
Awad, A. H. / El-gamasy, Ramadan / Abd El-Wahab, Ayman A. / Hazem Abdellatif, Mohamed	Mechanical behavior of PP reinforced with marble dust	116766
Zhang, Feng / Feng, Pengju / Wang, Teng / Chen, Jiangying	Mechanical-electric response characteristics of 1-3 cement based piezoelectric composite under impact loading	116781
Li, Kai-Qi / Li, Dian-Qing / Li, Pei-Tao / Liu, Yong	Meso-mechanical investigations on the overall elastic properties of multi-phase construction materials using finite element method	116727
Hou, Dongshuai / Zhang, Wei / Wang, Pan / Ma, Hongyan	Microscale peridynamic simulation of damage process of hydrated cement paste subjected to tension	117053
Chu, S. H. / Kwan, A. K. H.	Mixture design of self-levelling ultra-high performance FRC	116761
Zhou, Yuliang / Jin, Hao / Wang, Binglong	Modeling and mechanical influence of meso-scale concrete considering actual aggregate shapes	116785
Liu, Song / Chen, Xianhua / Ma, Yuewei / Yang, Jun / Cai, Degou / Yang, Guotao	Modelling and in-situ measurement of dynamic behavior of asphalt supporting layer in slab track system	116776
Sun, Xiaolong / Qin, Xiao / Liu, Zhisheng / Yin, Yingmei / He, Shaohua	New evaluating method and case study of thermal stability for asphalt pavement functional paving materials	117067
Liu, Chaochao / Lv, Songtao / Peng, Xinghai / Zheng, Jianlong	Normalized characterization method for fatigue behavior of cement-treated aggregates based on the yield criterion	117099
Xia, Jin / Li, Tian / Fang, Jiu-Xin / Jin, Wei-liang	Numerical simulation of steel corrosion in chloride contaminated concrete	116745
Kantarcı, Fatih / Türkmen, İbrahim / Ekinci, Enes	Optimization of production parameters of geopolymer mortar and concrete: A comprehensive experimental study	116770
Vila-Cortavitarte, Marta / Jato-Espino, Daniel / Tabaković, Amir / Castro-Fresno, Daniel	Optimizing the valorization of industrial by-products for the induction healing of asphalt mixtures	116715
Qian, Guoping / Yao, Ding / Gong, Xiangbing / Yu, Huanan / Li, Ningyuan	Performance evaluation and field application of hard asphalt concrete under heavy traffic conditions	116729
Qian, Jinsong / Chen, Kangwei / Tian, Yu / Zeng, Feng / Wang, Lijun	Performance evaluation of flexible pavements with a lateritic gravel base using accelerated pavement testing	116790
Liu, Sai / Zhu, Deju / Wang, Xuan / Shi, Caijun	Pullout properties of AR-glass textile embedded in cement matrix under different velocities and temperatures	116779
Tang, Hai-xiang / Long, Shi-guo / Li, Ting	Quantitative evaluation of tunnel lining voids by acoustic spectrum analysis	116762
Zhang, Jingfa / Li, Yue / Xing, Dan / Wang, Qingwen / Wang, Haigang / Koubaa, Ahmed	Reinforcement of continuous fibers for extruded wood-flour/HDPE composites: Effects of fiber type and amount	116718
Cherki El Idrissi, Anass / Roziere, Emmanuel / Darson-Balleur, Sabine / Loukili, Ahmed	Resistance of alkali-activated grouts to acid leaching	116681
Zhu, Xingyi / Yu, Yue / Li, Feng	A review on thermoelectric energy harvesting from asphalt pavement: Configuration, performance and future	116818
Baqersad, Mohamadtaqi / Ali, Hesham	Rheological and chemical characteristics of asphalt binders recycled using different recycling agents	116738
Gwon, Seongwoo / Shin, Myoungsu	Rheological properties of modified sulfur polymer composites containing cement-fly ash blend at different temperatures	116784
López Gayarre, Fernando / Suárez González, Jesús / López-Colina Pérez, Carlos / Serrano López, Miguel A. / Serna Ros, Pedro / Martínez-Barrera, Gonzalo	Shrinkage and creep in structural concrete with recycled brick aggregates	116750
Abdel-Gawwad, Hamdy A. / Mohammed, Mona S. / Alomayri, Thamer	Single and dual effects of magnesia and alumina nano-particles on strength and drying shrinkage of alkali activated slag	116827
Febin, G. Kottukappalli / Abhirami, A. / Vineetha, A. K. / Manisha, V. / Ramkrishnan, R. / Sathyan, Dhanya / Mini, K. M.	Strength and durability properties of quarry dust powder incorporated concrete blocks	116793
Gwon, Seongwoo / Kim, Seungpil / Ahn, Eunjong / Kim, Chanyoung / Shin, Myoungsu	Strength and toughness of hybrid steel and glass fiber-reinforced sulfur polymer composites	116812
Zhang, Rong-Jun / Dong, Chao-qiang / Lu, Zhan / Pu, He-fu	Strength characteristics of hydraulically dredged mud slurry treated by flocculation-solidification combined method	116742
Jin, Peng / Wang, Ruixing / Su, Yilin / Dong, Hua / Wang, Qianxi	Study on carbonation process of β-C2S under microbial enzymatic action	117110
Karrech, A. / Dong, M. / Elchalakani, M. / Shahin, M. A.	Sustainable geopolymer using lithium concentrate residues	116740
Perna, Ivana / Šupová, Monika / Hanzlicek, Tomas / Špaldoňová, Alexandra	The synthesis and characterization of geopolymers based on metakaolin and high LOI straw ash	116765
Li, Lin / Li, Jingpei / Yang, Changyi	Theoretical approach for prediction of service life of RC pipe piles with original incomplete cracks in chloride-contaminated soils	116717
Arriagada, Cristina / Navarrete, Ivan / Lopez, Mauricio	Understanding the effect of porosity on the mechanical and thermal performance of glass foam lightweight aggregates and the influence of production factors	116746
Gao, Yang / Romero, Pedro / Zhang, Hongliang / Huang, Man / Lai, Feng	Unsaturated polyester resin concrete: A review	116709
You, Lingyun / Yan, Kezhen / Wang, Daocheng / Ge, Dongdong / Song, Xiaojin	Use of amorphous-poly-alpha-olefin as an additive to improve terminal blend rubberized asphalt	116774
Sáez del Bosque, I. F. / Medina, J. M. / Frías, M. / Sánchez de Rojas, M. I. / Medina, C.	Use of biomass-fired power plant bottom ash as an addition in new blended cements: Effect on the structure of the C-S-H gel formed during hydration	117081
Gauss, Christian / Savastano, Holmer / Harries, Kent A.	Use of ISO 22157 mechanical test methods and the characterisation of Brazilian P. edulis bamboo	116728
Zeng, Weilai / Zhao, Yuxi / Poon, Chi Sun / Feng, Zhangyao / Lu, Zhenmei / Shah, Surendra P.	Using microbial carbonate precipitation to improve the properties of recycled aggregate	116743
Zhang, Wei-Ping / Li, Chong-kai / Gu, Xiang-Lin / Zeng, Yan-hong	Variability in cross-sectional areas and tensile properties of corroded prestressing wires	116830
Di Mundo, Rosa / Dilonardo, Elena / Nacucchi, Michele / Carbone, Giuseppe / Notarnicola, Michele	Water absorption in rubber-cement composites: 3D structure investigation by X-ray computed-tomography	116602
Liu, Chao / Luo, Jianlin / Li, Qiuyi / Gao, Song / Jin, Zuquan / Li, Shaochun / Zhang, Peng / Chen, Shuaichao	Water-resistance properties of high-belite sulphoaluminate cement-based ultra-light foamed concrete treated with different water repellents	116798
Sua-iam, Gritsada / Makul, Natt / Cheng, Shanshan / Sokrai, Prakasit	Workability and compressive strength development of self-consolidating concrete incorporating rice husk ash and foundry sand waste – A preliminary experimental study	116813

Informations
sur cette fiche
IssueID
33715
Publié(e) le:
06.10.2019
Modifié(e) le:
11.12.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - décembre 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - décembre 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.