Construction and Building Materials - décembre 2019

Publié:	décembre 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Narimani zamanabadi, Saeid / Zareei, Seyed Alireza / Shoaei, Parham / Ameri, Farshad	Ambient-cured alkali-activated slag paste incorporating micro-silica as repair material: Effects of alkali activator solution on physical and mechanical properties	116911
Wang, Y. C. / Li, Z. Y. / Wang, S. H. / Yang, W. G. / Liu, W. / Li, L. Y. / Tang, L. P. / Xing, F.	Analysis methodology of XCT results for testing ingress of substances in hardened cement paste: Explained with chloride immersion test	116839
Ding, Zhan / Zhang, Jing / Li, Peilong / Yue, Xiangjing / Bing, Hui	Analysis of viscous flow properties of styrene–butadiene–styrene-modified asphalt	116881
Li, L. G. / Zeng, K. L. / Ouyang, Y. / Kwan, A. K. H.	Basalt fibre-reinforced mortar: Rheology modelling based on water film thickness and fibre content	116857
Mi, Renjie / Pan, Ganghua / Shen, Qizhen	Carbonation modelling for cement-based materials considering influences of aggregate and interfacial transition zone	116925
Hu, Yaru / Li, Haihong / Wang, Qian / Zhang, Jun / Song, Qiang	Characterization of LDHs prepared with different activity MgO and resisting Cl− attack of concrete in salt lake brine	116921
Wang, Dongxing / Zhu, Jiaye / He, Fujin	CO2 carbonation-induced improvement in strength and microstructure of reactive MgO-CaO-fly ash-solidified soils	116914
Mo, Liwu / Fang, Jianwei / Huang, Bei / Wang, Aiguo / Deng, Min	Combined effects of biochar and MgO expansive additive on the autogenous shrinkage, internal relative humidity and compressive strength of cement pastes	116877
Lippiatt, Nicholas / Ling, Tung-Chai / Eggermont, Sam	Combining hydration and carbonation of cement using super-saturated aqueous CO2 solution	116825
Gu, Yu / Tang, Boming / He, Lihong / Yang, Fan / Wang, Hao / Ling, Jianming	Compatibility of cured phase-inversion waterborne epoxy resin emulsified asphalt	116942
Lotfi-Omran, Omid / Sadrmomtazi, Ali / Nikbin, Iman M.	A comprehensive study on the effect of water to cement ratio on the mechanical and radiation shielding properties of heavyweight concrete	116905
Chen, Changling / Li, Xiaojing / Chen, Xudong / Chai, Jinhuang / Tian, Huaxuan	Development of cemented paste backfill based on the addition of three mineral additions using the mixture design modeling approach	116919
Fritsch, Emil / Izadi, Mohammadreza / Ghafoori, Elyas	Development of nail-anchor strengthening system with iron-based shape memory alloy (Fe-SMA) strips	117042
Yang, Shuqing / Poon, Chi Sun / Ling, Tung Chai	Distribution of ASR gel in conventional wet-mix glass mortars and mechanically produced dry-mix glass blocks	116916
Ming, Jing / Shi, Jinjie	Distribution of corrosion products at the steel-concrete interface: Influence of mill scale properties, reinforcing steel type and corrosion inducing method	116854
Ali, Babar / Qureshi, Liaqat Ali	Durability of recycled aggregate concrete modified with sugarcane molasses	116913
De Munck, Matthias / Tysmans, Tine / El Kadi, Michael / Wastiels, Jan / Vervloet, Jolien / Kapsalis, Panagiotis / Remy, Olivier	Durability of sandwich beams with textile reinforced cementitious composite faces	116832
Aliques-Granero, Josep / Tognonvi, Monique Tohoue / Tagnit-Hamou, Arezki	Durability study of AAMs: Sulfate attack resistance	117100
Lu, Jinshan / Zhang, Zhipeng / Li, Yingde / Liu, Zhiyong	Effect of alumina source on the densification, phase evolution, and strengthening of sintered mullite-based ceramics from milled coal fly ash	116851
Chen, Yong-Gui / Sun, Zhao / Cui, Yu-Jun / Ye, Wei-min / Liu, Qi-hua	Effect of cement solutions on the swelling pressure of compacted GMZ bentonite at different temperatures	116872
Wang, Xianlin / Liu, Yuqing / Yang, Fei / Lu, Yuanchun / Li, Xuefeng	Effect of concrete cover on the bond-slip behavior between steel section and concrete in SRC structures	116855
Shen, Jiarong / Xu, Qianjun	Effect of elevated temperatures on compressive strength of concrete	116846
Indukuri, Chandra Sekhar Reddy / Nerella, Ruben / Madduru, Sri Rama Chand	Effect of graphene oxide on microstructure and strengthened properties of fly ash and silica fume based cement composites	116863
Nasr, Danial / Behforouz, Babak / Borujeni, Pouria Rezaei / Borujeni, Sajjad Afzali / Zehtab, Behnam	Effect of nano-silica on mechanical properties and durability of self-compacting mortar containing natural zeolite: Experimental investigations and artificial neural network modeling	116888
Ling, Yifeng / Zhang, Peng / Wang, Juan / Chen, Yuanzhao	Effect of PVA fiber on mechanical properties of cementitious composite with and without nano-SiO2	117068
Song, Weilong / Zhu, Zhiduo / Peng, Yuyi / Wan, Yu / Xu, Xiaoyu / Pu, ShaoYun / Song, Shigong / Wei, Yongqiang	Effect of steel slag on fresh, hardened and microstructural properties of high-calcium fly ash based geopolymers at standard curing condition	116933
Wu, Fan / Yu, Qingliang / Liu, Changwu / Brouwers, H. J. H. / Wang, Linfeng	Effect of surface treatment of apricot shell on the performance of lightweight bio-concrete	116859
Grossegger, Daniel / García, Álvaro	The effect of water and pressure on the self-healing of macro cracks in asphalt mortar beams	116941
Luo, Yaoling / Zhou, Shuai / Wang, Chong / Fang, Zheng	Effects of cations in sulfate on the thaumasite form of sulfate attack of cementitious materials	116865
Zhang, Shuo / Wu, Bo	Effects of salt solution on the mechanical behavior of concrete beams externally strengthened with AFRP	117044
Nosouhian, Farzaneh / Fincan, Mustafa / Shanahan, Natallia / Stetsko, Yuri P. / Riding, Kyle A. / Zayed, A.	Effects of slag characteristics on sulfate durability of Portland cement-slag blended systems	116882
Zuo, Xiao-Bao / Li, Xiang-Nan / Liu, Zhi-Yong / Huang, Wen-Yun / Sun, Xiang-Hua	Electrochemical and microstructural study on depassivation of ductile iron surface in chloride-contained simulated cement-mortar pore solution	116907
Alekseev, Kirill / Mymrin, Vsévolod / Avanci, Monica A. / Klitzke, Walderson / Magalhães, Washington L. E. / Silva, Patrícia R. / Catai, Rodrigo E. / Silva, Dimas A. / Ferraz, Fernando A.	Environmentally clean construction materials from hazardous bauxite waste red mud and spent foundry sand	116860
Liu, Longlong / Huang, Dahai / Wang, Zhenhong / Xin, Jianda / Liu, Yi	Estimation of thermal stresses in the field test under the restraint method	116890
De Souza, D. J. / Sanchez, L. F. M. / De Grazia, M. T.	Evaluation of a direct shear test setup to quantify AAR-induced expansion and damage in concrete	116806
Hu, Jie / Wang, Yangyang / Zhang, Zhangmin / Guo, Wenhao / Ma, Yuwei / Zhu, Wen / Wei, Jiangxiong / Yu, Qijun	Evaluation on the acidification damage of the external anode mortar induced by impressed current cathodic protection	116869
Chen, Jizhou / Zhang, Yu / Hou, Dongshuai / Yu, Jiao / Zhao, Tiejun / Yin, Bing	Experiment and molecular dynamics study on the mechanism for hydrophobic impregnation in cement-based materials: A case of octadecane carboxylic acid	116871
Hahn, Benjamin / Werner, Tom-Egmont / Haller, Peer	Experimental and numerical investigations on adhesively bonded tubular connections for moulded wooden tubes	116829
Elnagar, Amira B. / Afefy, Hamdy M. / Baraghith, Ahmed T. / Mahmoud, Mohamed H.	Experimental and numerical investigations on the impact resistance of SHCC-strengthened RC slabs subjected to drop weight loading	116866
Gil, Augusto M. / Khayat, Kamal H. / Tutikian, Bernardo F.	An experimental approach to design self-consolidating concrete	116939
Jafarinejad, Soheil / Rabiee, Amirmahdi / Shekarchi, Mohammad	Experimental investigation on the bond strength between Ultra high strength Fiber Reinforced Cementitious Mortar & conventional concrete	116814
Shen, Yin / Liu, Jie / Zhou, Shiyun / Li, Guoping	Experimental investigation on the freeze–thaw durability of concrete under compressive load and with joints	116893
Chen, Xuan / Wan, Dong-wei / Jin, Ling-Zhi / Qian, Kai / Fu, Feng	Experimental studies and microstructure analysis for ultra high-performance reactive powder concrete	116924
Crovella, Paul / Smith, William / Bartczak, Jacek	Experimental verification of shear analogy approach to predict bending stiffness for softwood and hardwood cross-laminated timber panels	116895
Shafabakhsh, GholamAli / Rajabi, Mobin / Sahaf, Ali	The fatigue behavior of SBS/nanosilica composite modified asphalt binder and mixture	116796
Yan, Xikang / Liang, Linxiao	Fatigue performance of post-installed anchorage beams	116597
Suescum-Morales, David / Romero-Esquinas, Álvaro / Fernández-Ledesma, Enrique / Fernández, José María / Jiménez, José Ramón	Feasible use of colliery spoils as subbase layer for low-traffic roads	116910
Šmilauer, Vít / Havlásek, Petr / Gasch, Tobias / Delaplace, Arnaud / Bouhjiti, David E.-M. / Benboudjema, Farid / Briffaut, Matthieu / Kanavaris, Fragkoulis / Azenha, Miguel	Hygro-mechanical modeling of restrained ring test: COST TU1404 benchmark	116543
Wang, Mingzhi / Al-Tabbaa, Abir / Wang, Wei	Improving discrete particle packing models for the microstructural formation simulation of Portland cement	116841
Liu, Kai / Fu, Chaoliang / Dai, Dongling / Jin, Can / Li, Weihan / Li, Shuqin / Xu, Xianming	Induction heating performance of asphalt pavements incorporating electrically conductive and magnetically absorbing layers	116805
Kasu, Sridhar Reddy / Deb, Sutapa / Mitra, Nilanjan / Muppireddy, Amarnatha Reddy / Kusam, Sudhakar Reddy	Influence of aggregate size on flexural fatigue response of concrete	116922
Marsh, A. / Heath, A. / Patureau, P. / Evernden, P. / Walker, P.	Influence of clay minerals and associated minerals in alkali activation of soils	116816
Ghalehnovi, Mansour / Karimipour, Arash / de Brito, Jorge	Influence of steel fibres on the flexural performance of reinforced concrete beams with lap-spliced bars	116853
Zhang, Dongsheng / Mao, Mingjie / Zhang, Shangrong / Yang, Qiuning	Influence of stress damage and high temperature on the freeze–thaw resistance of concrete with fly ash as fine aggregate	116845
Oderji, Sajjad Yousefi / Chen, Bing / Shakya, Chandan / Ahmad, Muhammad Riaz / Shah, Syed Farasat Ali	Influence of superplasticizers and retarders on the workability and strength of one-part alkali-activated fly ash/slag binders cured at room temperature	116891
AbdelAleem, Basem H. / Hassan, Assem A. A.	Influence of synthetic fibers’ type, length, and volume on enhancing the structural performance of rubberized concrete	116861
Capraro, Ana Paula Brandão / Cheremeta, Marcos Antonio / Gonçalves, Marcos Paulo Galvão / Cremonez, Claiton / Farias de Medeiros, Marcelo Henrique	Influence of the cement type and water/cement ratio in concretes exposed in sewage treatment plants	116842
Kadivar, Marzieh / Gauss, Christian / Mármol, Gonzalo / de Sá, Adriana Dominique / Fioroni, Carlos / Ghavami, Khosrow / Savastano, Holmer	The influence of the initial moisture content on densification process of D. asper bamboo: Physical-chemical and bending characterization	116896
Bautista, A. / Pomares, J. C. / González, M. N. / Velasco, F.	Influence of the microstructure of TMT reinforcing bars on their corrosion behavior in concrete with chlorides	116899
Zhang, Wulong / Yu, Linwen / François, Raoul	Influence of top-casting-induced defects on the corrosion of the compressive reinforcement of naturally corroded beams under sustained loading	116912
Hu, Wei / Jia, Xiaoyang / Zhu, Xingyi / Gong, Hongren / Xue, Genping / Huang, Baoshan	Investigating key factors of intelligent compaction for asphalt paving: A comparative case study	116876
He, Zhen / Cai, Rongjin / Chen, E. / Tang, Shengwen	The investigation of early hydration and pore structure for limestone powder wastes blended cement pastes	116923
Hu, Pengyue / Li, Shengli / Jiang, Nan / Yan, Yadan	Investigation of the impressed current cathodic protection method for the cable parallel wires in the rainwater electrolyte based on acoustic emission method	116918
Xu, Yingtang / Liu, Xiaoming / Zhang, Yuliang / Tang, Binwen / Mukiza, Emile	Investigation on sulfate activation of electrolytic manganese residue on early activity of blast furnace slag in cement-based cementitious material	116831
Chen, Xuemei / Gao, Jianming / Zhao, Yasong	Investigation on the hydration of hemihydrate phosphogypsum after post treatment	116864
Ozturk, Hande Isik / Kamran, Farshad	Laboratory evaluation of dry process crumb rubber modified mixtures containing Warm Mix Asphalt Additives	116940
Cheng, Xianpeng / Han, Sen / Liu, Yamin / Xu, Ouming	Laboratory investigation on low-temperature performance of asphalt at different aging stages	116850
Zhang, Qingtian / Xiao, Jianzhuang / Zhang, Peng / Zhang, Kaijian	Mechanical behaviour of seawater sea-sand recycled coarse aggregate concrete columns under axial compressive loading	117050
Gleaton, Jason / Lai, Zhengshou / Xiao, Rui / Chen, Qiushi / Zheng, Yi	Microalga-induced biocementation of martian regolith simulant: Effects of biogrouting methods and calcium sources	116885
Lv, Yukun / Zhao, Xuerou / Shi, Tuo / Bai, Li / Liu, XiuLan / Chen, Jian	Microstructure evolution of 400 MPa class rebar produced by QST and VNM technology under the high strain and low cycle fatigue	116889
Baldermann, Claudia / Baldermann, Andre / Furat, Orkun / Krüger, Markus / Nachtnebel, Manfred / Schroettner, Hartmuth / Juhart, Joachim / Schmidt, Volker / Tritthart, Josef	Mineralogical and microstructural response of hydrated cement blends to leaching	116902
Choorackal, Eldho / Riviera, Pier Paolo / Santagata, Ezio	Mix design and mechanical characterization of self-compacting cement-bound mixtures for paving applications	116894
Zheng, Liqiong / Cheng, Hao / Huo, Linsheng / Song, Gangbing	Monitor concrete moisture level using percussion and machine learning	117077
Abouhussien, Ahmed A. / Hassan, Assem A. A.	Monitoring early age strength gain of SCC with different supplementary cementitious materials using acoustic emission sensors	116858
Haile, Bezawit F. / Jin, D. W. / Yang, Beomjoo / Park, Solmoi / Lee, H. K.	Multi-level homogenization for the prediction of the mechanical properties of ultra-high-performance concrete	116797
Hamad, Rami J. A. / Haddad, Rami H. / Megat Johari, M. A.	New anchorage system of bars to improve the mechanical performance of post-heated FRP-reinforced concrete beams	117090
Zhang, Derun / Birgisson, Björn / Luo, Xue / Onifade, Ibrahim	A new long-term aging model for asphalt pavements using morphology-kinetics based approach	117032
Erdem, Tahir Kemal / Bilgiç, Esra / Kanpara Cıvaş, Züleyha	A new method to quantify the robustness of self-consolidating grouts	116849
Abd-Elaal, El-Sayed / Araby, Sherif / Mills, Julie E. / Youssf, Osama / Roychand, Rajeev / Ma, Xing / Zhuge, Yan / Gravina, Rebecca J.	Novel approach to improve crumb rubber concrete strength using thermal treatment	116901
Zhang, Derun / Luo, Rong	A novel method for measuring surface free energy of highly wettable mineral powders	116915
Chung, Sang-Yeop / Kim, Ji-Su / Stephan, Dietmar / Han, Tong-Seok	Overview of the use of micro-computed tomography (micro-CT) to investigate the relation between the material characteristics and properties of cement-based materials	116843
Válek, Jan / Skružná, Olga	Performance assessment of custom-made replications of an original historic render – A study of application influences	116822
Chen, Yuliang / Chen, Zongping / Xu, Jinjun / Lui, Eric M. / Wu, Bo	Performance evaluation of recycled aggregate concrete under multiaxial compression	116935
Zhang, Hongru / Ji, Tao / Liu, Hui	Performance evolution of the interfacial transition zone (ITZ) in recycled aggregate concrete under external sulfate attacks and dry-wet cycling	116938
Alyami, Mohammed H. / Alrashidi, Raid S. / Mosavi, Hossein / Almarshoud, Mohammed A. / Riding, Kyle A.	Potential accelerated test methods for physical sulfate attack on concrete	116920
Morsy, M. S. / Rashad, Alaa M. / Shoukry, H. / Mokhtar, M. M.	Potential use of limestone in metakaolin-based geopolymer activated with H3PO4 for thermal insulation	117088
Shahmansouri, Amir Ali / Bengar, Habib Akbarzadeh / Jahani, Ehsan	Predicting compressive strength and electrical resistivity of eco-friendly concrete containing natural zeolite via GEP algorithm	116883
Mousavimehr, Mehdi / Nematzadeh, Mahdi	Predicting post-fire behavior of crumb rubber aggregate concrete	116834
Ouyang, Jing / Wu, Fangbo / Lü, Weirong / Huang, Hailin / Zhou, Xuhong	Prediction of compressive stress-strain curves of grouted masonry	116826
Jia, Xingwen / Li, Junmeng / Wang, Ping / Qian, Jueshi / Tang, Maohua	Preparation and mechanical properties of magnesium phosphate cement for rapid construction repair in ice and snow	116927
Su, Zhibin / Muhammad, Yaseen / Sahibzada, Maria / Li, Jing / Meng, Fei / Wei, Yunhao / Zhao, Zhenxia / Zhang, Lei	Preparation and properties of aminated graphene fiber incorporated modified asphalt	116836
Xiong, Guangqi / Wang, Chong / Zhou, Shuai / Jia, Xiaolong / Luo, Wei / Liu, Jiawen / Peng, Xiang	Preparation of high strength lightweight aggregate concrete with the vibration mixing process	116936
Cheng, Yunhong / Liu, Shuai / Zhu, Baolong / Liu, Rui / Wang, Yuan	Preparation of preplaced aggregate concrete and experimental study on its strength	116847
Novais, Rui M. / Saeli, Manfredi / Caetano, Ana P. F. / Seabra, Maria P. / Labrincha, João A. / Surendran, Kuzhichalil P. / Pullar, Robert C.	Pyrolysed cork-geopolymer composites: A novel and sustainable EMI shielding building material	116930
Ramesh, Meera / Azenha, Miguel / Lourenço, Paulo B.	Quantification of impact of lime on mechanical behaviour of lime cement blended mortars for bedding joints in masonry systems	116884
dos Santos Macedo, Rafael / Ulsen, Carina / Mueller, Anette	Quantification of residual cement paste on recycled concrete aggregates containing limestone by selective dissolution	116875
Chen, Mingxu / Zheng, Yan / Zhou, Xiangming / Li, Laibo / Wang, Shoude / Zhao, Piqi / Lu, Lingchao / Cheng, Xin	Recycling of paper sludge powder for achieving sustainable and energy-saving building materials	116874
Jazayeri, Sajad / Kruse, Sarah / Hasan, Istiaque / Yazdani, Nur	Reinforced concrete mapping using full-waveform inversion of GPR data	117102
Sakai, Yuya	Relationship between pore structure and chloride diffusion in cementitious materials	116868
Jesus, Sara / Maia, Cinthia / Brazão Farinha, Catarina / de Brito, Jorge / Veiga, Rosário	Rendering mortars with incorporation of very fine aggregates from construction and demolition waste	116844
Yun-tao, Hua / Shi-ping, Yin / Yu-lin, Yu / Shan, Li	Research on chloride diffusion and flexural behavior of beams strengthened with TRC subjected to dry-wet cycles	116906
Wang, Lining / Aslani, Farhad	A review on material design, performance, and practical application of electrically conductive cementitious composites	116892
Jiang, Guanzhao / Wu, Aixiang / Wang, Yiming / Li, Jianqiu	The rheological behavior of paste prepared from hemihydrate phosphogypsum and tailing	116870
Khan, Inamullah / Xu, Tengfei / Castel, Arnaud / Gilbert, Raymond Ian / Babaee, Mahdi	Risk of early age cracking in geopolymer concrete due to restrained shrinkage	116840
Li, L. G. / Chen, X. Q. / Chu, S. H. / Ouyang, Y. / Kwan, A. K. H.	Seawater cement paste: Effects of seawater and roles of water film thickness and superplasticizer dosage	116862
Xue, Jianyang / Zhang, Xin / Ke, Xiaojun / Ma, Linlin	Seismic resistance capacity of steel reinforced high-strength concrete columns with rectangular spiral stirrups	116880
Bochen, Jerzy / Nowoświat, Artur	Service life assessment of renders on the basis of changes of physical and mechanical properties during simulated weathering	117003
Jiang, Zhi-Lu / Gu, Xiang-Lin / Huang, Qing-Hua / Zhang, Wei-Ping	Statistical analysis of concrete carbonation depths considering different coarse aggregate shapes	116856
Manjunath, R. / Narasimhan, Mattur C. / Umesha, K. M.	Studies on high performance alkali activated slag concrete mixes subjected to aggressive environments and sustained elevated temperatures	116887
Wang, Mingnian / Hu, Yunpeng / Wang, Qiling / Tian, Hongtao / Liu, Dagang	A study on strength characteristics of concrete under variable temperature curing conditions in ultra-high geothermal tunnels	116989
Sebastian, W. M.	Switch from connection ductility to reinforcement ductility with curvature reversal in timber-concrete composites	116886
Jia, Meng / Zhang, Zengping / Liu, Haiting / Peng, Biao / Zhang, Hongliang / Lv, Wenjiang / Zhang, Qiang / Mao, Zhiyong	The synergistic effect of organic montmorillonite and thermoplastic polyurethane on properties of asphalt binder	116867
Cheng, Shukai / Shui, Zhonghe / Sun, Tao / Gao, Xu / Guo, Cheng	Synergistic effects of sulfate and magnesium ions on chloride diffusion behaviors of Portland cement mortar	116878
Perlin, Lourenço Panosso / Pinto, Roberto Caldas de Andrade / do Valle, Ângela	Ultrasonic tomography in wood with anisotropy consideration	116958
Omar, Ahmed T. / Hassan, Assem A. A.	Use of polymeric fibers to improve the mechanical properties and impact resistance of lightweight SCC	116944
Luo, Shuqiong / Liu, Min / Yang, Lei / Chang, Jindan / Yang, Wenpeng / Yan, Xuyan / Yu, Huiling / Shen, Yongxuan	Utilization of waste from alumina industry to produce sustainable cement-based materials	116795
Pliatsikas, I. / Robou, E. / Samouhos, M. / Katsiotis, N. S. / Tsakiridis, P. E.	Valorization of demolition ceramic wastes and lignite bottom ash for the production of ternary blended cements	116879

Informations
sur cette fiche
IssueID
33714
Publié(e) le:
06.10.2019
Modifié(e) le:
11.12.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - décembre 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - décembre 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.