Construction and Building Materials - novembre 2019

Publié:	novembre 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Wang, Jinbang / Xu, Hongxin / Xu, Dongyu / Du, Peng / Zhou, Zonghui / Yuan, Lianwang / Cheng, Xin	Accelerated carbonation of hardened cement pastes: Influence of porosity	159-169
Baji, Hassan / Yang, Wei / Li, Chun-Qing / Shi, Wenhai	Analytical models for effective hydraulic sorptivity, diffusivity and conductivity of concrete with interfacial transition zone	555-568
Ma, Xiaoyan / Chen, Huaxin / Yang, Pingwen / Xing, Mingliang / Niu, Dongyu / Wu, Shujuan	Assessment of existing micro-mechanical models for asphalt mastic considering inter-particle and physico-chemical interaction	649-660
de Almendra Freitas, José / do Rocio de Mello Maron da Costa, Marienne / Artigas, Laila Valduga / Martins, Leidimara / Sanquetta, Carlos Roberto	Assessment of the impact of binders in the evolution of carbonation in mortars	496-501
He, Ziming / Shen, Aiqin / Guo, Yinchuan / Lyu, Zhenghua / Li, Desheng / Qin, Xiao / Zhao, Ming / Wang, Zhenlong	Cement-based materials modified with superabsorbent polymers: A review	569-590
Carl, C. / Lopes, P. / Sá da Costa, M. / Canon Falla, G. / Leischner, S. / Micaelo, R.	Comparative study of the effect of long-term ageing on the behaviour of bitumen and mastics with mineral fillers	76-89
Janků, Michal / Cikrle, Petr / Grošek, Jiří / Anton, Ondřej / Stryk, Josef	Comparison of infrared thermography, ground-penetrating radar and ultrasonic pulse echo for detecting delaminations in concrete bridges	1098-1111
Chen, Guoqing / Xu, Peng / Mi, Guanyu / Zhu, Jing	Compressive strength and cracking of composite concrete in hot-humid environments based on microscopic quantitative analysis	441-451
Ma, Yafei / Wang, Guodong / Guo, Zhongzhao / Wang, Lei / Jiang, Tianyong / Zhang, Jianren	Critical region method-based fatigue life prediction of notched steel wires of long-span bridges	601-610
Zhang, Mingfa / Bareille, Olivier / Salvia, Michelle	Cure and damage monitoring of flax fiber-reinforced epoxy composite repairs for civil engineering structures using embedded piezo micro-patches	196-203
Gu, Fan / Chen, Chen / Yin, Fan / West, Randy C. / Taylor, Adam	Development of a new cracking index for asphalt mixtures using indirect tensile creep and strength test	465-475
Zhang, Tong / Zhang, Yao / Xiao, Ziqi / Yang, Zhenglong / Zhu, Hehua / Ju, J. Woody / Yan, Zhiguo	Development of a novel bio-inspired cement-based composite material to improve the fire resistance of engineering structures	99-111
Mohseni, Ehsan / Tang, Waiching / Wang, Shanyong	Development of thermal energy storage lightweight structural cementitious composites by means of macro-encapsulated PCM	182-195
Medina, J. M. / Sáez del Bosque, I. F. / Frías, M. / Sánchez de Rojas, M. I. / Medina, C.	Durability of new blended cements additioned with recycled biomass bottom ASH from electric power plants	429-440
de Matos, Paulo Ricardo / Sakata, Rafael Dors / Prudêncio, Luiz Roberto	Eco-efficient low binder high-performance self-compacting concretes	941-955
Záleská, Martina / Pavlík, Zbyšek / Čítek, David / Jankovský, Ondřej / Pavlíková, Milena	Eco-friendly concrete with scrap-tyre-rubber-based aggregate – Properties and thermal stability	709-722
Ji, Xinyi / Hou, Jiwei / Liu, Yanchao / Liu, Jiaxiang	Effect of CaO-FeO-MnO system solid solution on the hydration activity of tri-component f-CaO in steel slag	476-484
Hu, Miaomiao / Guo, Jintang / Li, Pengpeng / Chen, Di / Xu, Yang / Feng, Yakai / Yu, Yongjin / Zhang, Hua	Effect of characteristics of chemical combined of graphene oxide-nanosilica nanocomposite fillers on properties of cement-based materials	745-753
Zhang, Haijiang / Xu, Shanhua / Nie, Biao / Wen, Yaxin	Effect of corrosion on the fracture properties of steel plates	1202-1213
Bekele, Abiy / Ryden, Nils / Gudmarsson, Anders / Birgisson, Björn	Effect of cyclic low temperature conditioning on stiffness modulus of asphalt concrete based on non-contact resonance testing method	502-509
Xu, Jiangtao / Chen, Jingwei / Lu, Duyou / Xu, Zhongzi / Hooton, R. D.	Effect of dolomite powder on the hydration and properties of calcium sulfoaluminate cements with different gypsum contents	302-310
Wang, Xiao-Yong / Lee, Han-Seung	Effect of global warming on the proportional design of low CO2 slag-blended concrete	1140-1151
Baldino, Noemi / Angelico, Ruggero / Caputo, Paolino / Gabriele, Domenico / Oliviero Rossi, Cesare	Effect of high water salinity on the adhesion properties of model bitumen modified with a smart additive	642-648
Zhu, Chongzheng / Tang, Juncheng / Zhang, Henglong / Duan, Haihui	Effect of liquid anti-stripping agents on moisture sensitivity of crumb rubber modified asphalt binders and mixtures	112-119
Kathirvel, Parthiban / Anik, George Amal / Kaliyaperumal, Saravana Raja Mohan	Effect of partial replacement of cement with Prosopis juliflora ash on the strength and microstructural characteristics of cement concrete	273-282
Madhkhan, Morteza / Katirai, Roozbeh	Effect of pozzolanic materials on mechanical properties and aging of glass fiber reinforced concrete	146-158
Chen, Lianjun / Ma, Guanguo / Liu, Guoming / Liu, Zhaoxia	Effect of pumping and spraying processes on the rheological properties and air content of wet-mix shotcrete with various admixtures	311-323
Chu, L. / Luo, L. / Fwa, T. F.	Effects of aggregate mineral surface anisotropy on asphalt-aggregate interfacial bonding using molecular dynamics (MD) simulation	1-12
Wang, Yuli / He, Fengxia / Wang, Junjie / Wang, Cheng / Xiong, Zuqiang	Effects of calcium bicarbonate on the properties of ordinary Portland cement paste	591-600
Naseroleslami, Ramin / Nemati Chari, Mehdi	The effects of calcium stearate on mechanical and durability aspects of self-consolidating concretes incorporating silica fume/natural zeolite	384-400
Lin, Hongwei / Zhao, Yuxi / Yang, Jia-qi / Feng, Peng / Ožbolt, Jośko / Ye, Hailong	Effects of the corrosion of main bar and stirrups on the bond behavior of reinforcing steel bar	13-28
Buch, Shujaat H. / Sharma, Umesh K.	Empirical model for determining fire resistance of Reinforced Concrete columns	838-852
Montoya, Miguel A. / Haddock, John E.	Estimating asphalt mixture volumetric properties using seemingly unrelated regression equations approaches	829-837
Li, Bo / Zhang, Chen / Xiao, Peng / Wu, Zhengguang	Evaluation of coarse aggregate morphological characteristics affecting performance of heavy-duty asphalt pavements	170-181
Najjar, Shima / Mohammadzadeh Moghaddam, Abolfazl / Sahaf, Ali / Rasaei Yazdani, Mohammadreza / Delarami, Aref	Evaluation of the mixed mode (I/II) fracture toughness of cement emulsified asphalt mortar (CRTS-II) using mixture design of experiments	812-828
Tian, Huiwen / Zhou, Zhen / Wei, Yang / Wang, Yongquan / Lu, Jiping	Experimental investigation on axial compressive behavior of ultra-high performance concrete (UHPC) filled glass FRP tubes	678-691
Mudie, J. / Sebastian, W. M. / Norman, J. / Bond, I. P.	Experimental study of moment sharing in multi-joist timber-concrete composite floors from zero load up to failure	956-971
Yang, Keun-Hyeok / Hwang, Yong-Ha / Lee, Yongjei / Mun, Ju-Hyun	Feasibility test and evaluation models to develop sustainable insulation concrete using foam and bottom ash aggregates	620-632
Mateos, Angel / Harvey, John / Bolander, John / Wu, Rongzong / Paniagua, Julio / Paniagua, Fabian	Field evaluation of the impact of environmental conditions on concrete moisture-related shrinkage and coefficient of thermal expansion	348-357
Sun, Xinjian / Gao, Zhen / Cao, Peng / Zhou, Changjun / Ling, Yifeng / Wang, Xuhao / Zhao, Yawei / Diao, Mushuang	Fracture performance and numerical simulation of basalt fiber concrete using three-point bending test on notched beam	788-800
Castori, Giulio / Speranzini, Emanuela	Fracture strength prediction of float glass: The Coaxial Double Ring test method	1064-1076
Silva, Bruna / Pinto, Ana Paula Ferreira / Gomes, Augusto / Candeias, António	Fresh and hardened state behaviour of aerial lime mortars with superplasticizer	1127-1139
He, Xin / Lai, Zhenyu / Yan, Tao / Wu, Jie / Lu, Zhongyuan / Lv, Shuzhen / Li, Feng / Fan, XiaoLing	Hydration characteristics and microstructure of magnesium phosphate cement in presence of Cu2+	234-242
Zeng, Xiaohui / Ma, Cong / Long, Guangcheng / Dang, Hanfei / Xie, Youjun	Hydration kinetics of cement composites with different admixtures at low temperatures	223-233
Niu, Mengdie / Li, Guoxin / Wang, Yan / Cao, Li / Han, Lulu / Li, Qiqi / Song, Zhanping	Immobilization of Pb2+ and Cr3+ using bentonite-sulfoaluminate cement composites	868-878
Juradin, Sandra / Boko, Ivica / Netinger Grubeša, Ivanka / Jozić, Dražan / Mrakovčić, Silvija	Influence of harvesting time and maceration method of Spanish Broom (Spartium junceum L.) fibers on mechanical properties of reinforced cement mortar	243-255
Alfahdawi, Ibrahim H. / Osman, S. A. / Hamid, R. / Al-Hadithi, Abdulkader Ismail	Influence of PET wastes on the environment and high strength concrete properties exposed to high temperatures	358-370
Figueira, Diogo / Sena-Cruz, José / Pereira, Eduardo / Valente, Isabel / Barros, Joaquim / Castro, Fernando / Soares, Delfim	Influence of service temperature on shear creep behaviour of a rigid low-density closed-cell PIR foam	1052-1063
Azima, Mahzad / Bundur, Zeynep Başaran	Influence of Sporasarcina pasteurii cells on rheological properties of cement paste	1086-1097
Kheradmand, Mohammad / Vicente, Romeu / Azenha, Miguel / de Aguiar, José L. B.	Influence of the incorporation of phase change materials on temperature development in mortar at early ages: Experiments and numerical simulation	1036-1051
Arslan, Ahmet Ali / Uysal, Mucteba / Yilmaz, Arin / Al-mashhadani, Mukhallad M. / Canpolat, Orhan / Şahin, Furkan / Aygörmez, Yurdakul	Influence of wetting-drying curing system on the performance of fiber reinforced metakaolin-based geopolymer composites	909-926
Su, Yen-Fang / Han, Guangshuai / Amran, Adlan / Nantung, Tommy / Lu, Na	Instantaneous monitoring the early age properties of cementitious materials using PZT-based electromechanical impedance (EMI) technique	340-347
Ben Fraj, Amor / Bonnet, Stéphanie / Leklou, Nordine / Khelidj, Abdelhafid	Investigating the early-age diffusion of chloride ions in hardening slag-blended mortars on the light of their hydration progress	485-495
Ambikakumari Sanalkumar, Krishnan U. / Lahoti, Mukund / Yang, En-Hua	Investigating the potential reactivity of fly ash for geopolymerization	283-291
Bagheri, Alireza / Ajam, Abbas / Zanganeh, Hamed	Investigation of chloride ingress into concrete under very early age exposure conditions	801-811
Liu, Jun-liang / Xu, Jin-yu / Lu, Song / Chen, Haowen	Investigation on dielectric properties and microwave heating efficiencies of various concrete pavements during microwave deicing	55-66
Du, Jianmin / Tang, Zhenyu / Li, Guo / Yang, Hui / Li, Linlin	Key inhibitory mechanism of external chloride ions on concrete sulfate attack	611-619
Aggelakopoulou, Eleni / Bakolas, Asterios / Moropoulou, Antonia	Lime putty versus hydrated lime powder: Physicochemical and mechanical characteristics of lime based mortars	633-641
Sun, Xiao / Du, Yang / Liao, Wenyu / Ma, Hongyan / Huang, Jie	Measuring the heterogeneity of cement paste by truly distributed optical fiber sensors	765-771
Kolawole, John Temitope / Combrinck, Riaan / Boshoff, William Peter	Measuring the thixotropy of conventional concrete: The influence of viscosity modifying agent, superplasticiser and water	853-867
Guo, Yan-Dong / Xie, Xin-Ming / Su, Jun-Feng / Mu, Ru / Wang, Xian-Feng / Jin, Hu-Ping / Fang, Yuan / Ding, Zhu / Lv, Le-Yang / Han, Ning-Xu	Mechanical experiment evaluation of the microvascular self-healing capability of bitumen using hollow fibers containing oily rejuvenator	1026-1035
Monatshebe, Tshiyoyo / Mulaba-Bafubiandi, Antoine F. / Kasongo Nyembwe, Didier	Mechanical properties and mineralogy of artisanal clay bricks manufactured in Dididi, Limpopo, South Africa	972-982
Hossain, F. M. Zahid / Shahjalal, Md. / Islam, Kamrul / Tiznobaik, Mohammad / Shahria Alam, M.	Mechanical properties of recycled aggregate concrete containing crumb rubber and polypropylene fiber	983-996
Liu, Jian-bin / Zhang, Zhong-jian / Li, Biao	Microscopic & macroscopic characterizations of Beijing marble as a building material for UNESCO heritage sites: New insights into physico-mechanical property estimation and weathering resistance	510-525
Mohammed Haneefa, K. / Divya Rani, S. / Ramasamy, R. / Santhanam, Manu	Microstructure and geochemistry of lime plaster mortar from a heritage structure	538-554
Liu, Jin / Guo, Runhua	The microstructures of hardened composite binders containing steel slag and GGBS at 10 years	1152-1159
Mateus, Luís / Veiga, M. Rosário / de Brito, Jorge / Santos Silva, A.	Mineralogical and mechanical characterization of rammed earth external renderings of the south of Portugal	1160-1169
Askarian, Mahya / Tao, Zhong / Samali, Bijan / Adam, Georgius / Shuaibu, Richard	Mix composition and characterisation of one-part geopolymers with different activators	526-537
Li, Maohong / Hong, Yuanxiao / Yu, Hong / Qu, Shuxin / Wang, Ping	A novel high solar reflective coating based on potassium silicate for track slab in high-speed railway	900-908
Chang, Honglei / Feng, Pan / Lyu, Kai / Liu, Jian	A novel method for assessing C-S-H chloride adsorption in cement pastes	324-331
AlAjarmeh, O. S. / Manalo, A. C. / Benmokrane, B. / Vijay, P. V. / Ferdous, W. / Mendis, P.	Novel testing and characterization of GFRP bars in compression	1112-1126
Manrique-Sanchez, Laura / Caro, Silvia	Numerical assessment of the structural contribution of porous friction courses (PFC)	754-764
Lagou, Androniki / Kylili, Angeliki / Šadauskienė, Jolanta / Fokaides, Paris A.	Numerical investigation of phase change materials (PCM) optimal melting properties and position in building elements under diverse conditions	452-464
Mohammed, Bashar S. / Haruna, Sani / Mubarak bn Abdul Wahab, Mohamed / Liew, M. S.	Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology	776-787
Luo, Yaofei / Zhang, Ke / Li, Peilong / Yang, Jianhua / Xie, Xiangbing	Performance evaluation of stone mastic asphalt mixture with different high viscosity modified asphalt based on laboratory tests	214-222
Yang, Yu / Ji, Tao / Su, Wenyue / Yang, Bin / Zhang, Yong / Yang, Zhengxian	Photocatalytic NOx abatement and self-cleaning performance of cementitious composites with g-C3N4 nanosheets under visible light	120-131
Rathore, Pushpendra Kumar Singh / Shukla, Shailendra Kumar	Potential of macroencapsulated pcm for thermal energy storage in buildings: A comprehensive review	723-744
Li, Yang / Zhang, Shuai / Wang, Ruijun / Dang, Faning	Potential use of waste tire rubber as aggregate in cement concrete – A comprehensive review	1183-1201
Vakharia, Vinay / Gujar, Rajesh	Prediction of compressive strength and portland cement composition using cross-validation and feature ranking techniques	292-301
Tan, Jianli / Lu, Wanli / Huang, Yuantian / Wei, Shiju / Xuan, Xiaoxin / Liu, Leping / Zheng, Guangjian	Preliminary study on compatibility of metakaolin-based geopolymer paste with plant fibers	772-775
Yang, Heng / Li, Weihua / Liu, Xiaoyan / Liu, Ang / Hang, Peng / Ding, Rui / Li, Tianyu / Zhang, Yumei / Wang, Wei / Xiong, Chuansheng	Preparation of corrosion inhibitor loaded zeolites and corrosion resistance of carbon steel in simulated concrete pore solution	90-98
Arora, Sumit / Singh, S. P.	Probability of failure of RCA concrete with ternary blended cements	401-414
Tajra, Feras / Abd Elrahman, Mohamed / Stephan, Dietmar	The production and properties of cold-bonded aggregate and its applications in concrete: A review	29-43
Suárez-Navarro, J. A. / Lanzón, M. / Moreno-Reyes, A. M. / Gasco, C. / Alonso, M. M. / Blanco-Varela, M. T. / Puertas, F.	Radiological behaviour of pigments and water repellents in cement-based mortars	879-885
Zhang, Huan / Sheng, Peiyao / Zhang, Jizhi / Ji, Zhong	Realistic 3D modeling of concrete composites with randomly distributed aggregates by using aggregate expansion method	927-940
Cascardi, Alessio / Dell'Anna, Riccardo / Micelli, Francesco / Lionetto, Francesca / Aiello, Maria Antonietta / Maffezzoli, Alfonso	Reversible techniques for FRP-confinement of masonry columns	415-428
Mondal, Sandip / Ghosh, Aparna (Dey)	Review on microbial induced calcite precipitation mechanisms leading to bacterial selection for microbial concrete	67-75
Mirzaaghaeian, Erisa / Modarres, Amir	Rheological properties of bituminous mastics containing chemical warm additive at medium temperatures and its relationship to warm mix asphalt fatigue behavior	44-54
Luo, Zhe / Hu, Biao / Pan, Ernian	Robust design approach for flexible pavements to minimize the influence of material property uncertainty	332-339
Yang, Jin / Huang, Jianxiang / He, Xingyang / Su, Ying / Tan, Hongbo / Chen, Wei / Wang, Xiongjue / Strnadel, Bohumír	Segmented fractal pore structure covering nano- and micro-ranges in cementing composites produced with GGBS	1170-1182
Fang, Shu / Liu, Feng / Xiong, Zhe / Fang, Jinsong / Li, Lijuan	Seismic performance of recycled aggregate concrete-filled glass fibre-reinforced polymer-steel composite tube columns	997-1010
Kayondo, M. / Combrinck, R. / Boshoff, W. P.	State-of-the-art review on plastic cracking of concrete	886-899
Vidya Sagar, R. / Deepak, S. / Desai, Prithviraj R.	Statistical analysis of acoustic emissions generated during unconfined uniaxial compression of cementitious materials	692-708
Sandhu, Ravinder Kaur / Siddique, Rafat	Strength properties and microstructural analysis of self-compacting concrete incorporating waste foundry sand	371-383
Liu, Xi / Wu, Tao / Liu, Yang	Stress-strain relationship for plain and fibre-reinforced lightweight aggregate concrete	256-272
Zhou, Yan / Chen, Junda / Zhang, Kai / Guan, Qinghai / Guo, Hongmei / Xu, Peng / Wang, Jian	Study on aging performance of modified asphalt binders based on characteristic peaks and molecular weights	1077-1085
Hongqiang, Ma / Hongyu, Chen / Hongguang, Zhu / yangyang, Shi / Yadong, Ni / Qingjie, Huo / Zetao, Hang	Study on the drying shrinkage of alkali-activated coal gangue-slag mortar and its mechanisms	204-213
Song, Zhengyang / Konietzky, Heinz / Herbst, Martin	Three-dimensional particle model based numerical simulation on multi-level compressive cyclic loading of concrete	661-677
Cong, Lin / Yang, Fan / Guo, Guihong / Ren, Minda / Shi, Jiachen / Tan, Le	The use of polyurethane for asphalt pavement engineering applications: A state-of-the-art review	1012-1025
Huseien, Ghasan Fahim / Sam, Abdul Rahman Mohd / Shah, Kwok Wei / Budiea, A. M. A. / Mirza, Jahangir	Utilizing spend garnets as sand replacement in alkali-activated mortars containing fly ash and GBFS	132-145

Informations
sur cette fiche
IssueID
31152
Publié(e) le:
04.08.2019
Modifié(e) le:
04.08.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - novembre 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - novembre 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.