Construction and Building Materials - octobre 2019

Publié:	octobre 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Alhajj, Marie Antoinette / Palma-Lopes, Sérgio / Villain, Géraldine	Accounting for steel rebar effect on resistivity profiles in view of reinforced concrete structure survey	898-909
Alonso-Villar, E. M. / Rivas, T. / Pozo-Antonio, J. S.	Adhesives applied to granite cultural heritage: Effectiveness, harmful effects and reversibility	951-964
Cao, Lei / Liu, Chun / Tian, Hongyan / Jia, Dandan / Wang, Dongjun / Xu, Yang / Guo, Jintang	Adsorption interaction between cement hydrates minerals with fluid loss additive investigated by fluorescence technique	1106-1111
Galobardes, Isaac / Silva, Cesar L. / Figueiredo, António / Cavalaro, Sergio H. P. / Goodier, Chris I.	Alternative quality control of steel fibre reinforced sprayed concrete (SFRSC)	1008-1015
Zhang, Kaijian / Xiao, Jianzhuang / Zhao, Yuxi / Zhang, Qingtian	Analytical model for critical corrosion level of reinforcements to cause the cracking of concrete cover	185-197
Guo, Rui / Nian, Tengfei / Li, Ping / Fu, Jiangtao / Guo, Hong	Anti-erosion performance of asphalt pavement with a sub-base of cement-treated mixtures	278-287
Pham, Phuong Ngoc / Zhuge, Yan / Turatsinze, Anaclet / Toumi, Ahmed / Siddique, Rafat	Application of rubberized cement-based composites in pavements: Suitability and considerations	1182-1195
Abdou, M. I. / Fadl, A. M.	Assessment of nano-FeTiO3/non crystalline silica cold galvanizing composite coating as a duplex corrosion guard system for steel electricity transmission towers in severe aggressive media	705-723
Hu, Xiaopeng / Peng, Gang / Niu, Ditao / Wang, Jing	Bond properties of deformed steel bars in concrete during construction under reversed cyclic loading	817-829
Martins, Carlos / Dias, Alfredo M. P. G. / Cruz, Helena	Bonding performance of Portuguese Maritime pine glued laminated timber	520-529
Zhang, Jian / Shi, Caijun / Zhang, Zuhua	Carbonation induced phase evolution in alkali-activated slag/fly ash cements: The effect of silicate modulus of activators	566-582
Ba, Mingfang / Xue, Tao / He, Zhimin / Wang, Hui / Liu, Junzhe	Carbonation of magnesium oxysulfate cement and its influence on mechanical performance	1030-1037
Li, L. G. / Zheng, J. Y. / Ng, P. L. / Zhu, J. / Kwan, A. K. H.	Cementing efficiencies and synergistic roles of silica fume and nano-silica in sulphate and chloride resistance of concrete	965-975
Chen, Jiaojiao / Cai, Xin / Lale, Erol / Yang, Jie / Cusatis, Gianluca	Centrifuge modeling testing and multiscale analysis of cemented sand and gravel (CSG) dams	605-615
Steindl, Florian R. / Baldermann, Andre / Galan, Isabel / Sakoparnig, Marlene / Briendl, Lukas / Dietzel, Martin / Mittermayr, Florian	Chemical resistance of eco-concrete – Experimental approach on Ca-leaching and sulphate attack	55-68
Lu, Jian-xin / Zheng, Haibing / Yang, Shuqing / He, Pingping / Poon, Chi Sun	Co-utilization of waste glass cullet and glass powder in precast concrete products	210-220
Bouraima, Mouhamed Bayane / Zhang, Xiao Hua / Rahman, Ali / Qiu, Yanjun	A comparative study on asphalt binder and mixture performance of two traffic lanes during hot in-place recycling (HIR) procedure	33-43
Snoeck, D. / Pel, L. / De Belie, N.	Comparison of different techniques to study the nanostructure and the microstructure of cementitious materials with and without superabsorbent polymers	244-253
Wang, Yuanzhan / Fu, Kun	Comparisons of instantaneous chloride diffusion coefficients determined by RCM method and chloride natural diffusion test	595-604
Lao, Xiaojie / Han, Xiaolei / Ji, Jing / Chen, Binbin	The compression behavior of CFRP-repaired damaged square RC columns	1154-1166
Yan, Jia-Bao / Dong, Xin / Zhu, Jin-Song	Compressive behaviours of CFST stub columns at low temperatures relevant to the Arctic environment	503-519
Zhang, Yanlong / Su, Ray Kai Leung	Concrete cover delamination model for non-uniform corrosion of reinforcements	329-340
Torres-Carrasco, M. / Reinosa, J. J. / de la Rubia, M. A. / Reyes, E. / Alonso Peralta, F. / Fernández, J. F.	Critical aspects in the handling of reactive silica in cementitious materials: Effectiveness of rice husk ash vs nano-silica in mortar dosage	360-367
Hu, Jianying / Yu, Xiong (Bill)	Design and characterization of energy efficient roofing system with innovative TiO2 enhanced thermochromic films	1053-1062
Badr, Joanna / Fargier, Yannick / Palma-Lopes, Sérgio / Deby, Fabrice / Balayssac, Jean-Paul / Delepine-Lesoille, Sylvie / Cottineau, Louis-Marie / Villain, Géraldine	Design and validation of a multi-electrode embedded sensor to monitor resistivity profiles over depth in concrete	310-321
Fan, Ziyuan / Sun, Yongming	Detecting and evaluation of fatigue damage in concrete with industrial computed tomography technology	794-805
Maddalena, Riccardo / Li, Kefei / Chater, Philip A. / Michalik, Stefan / Hamilton, Andrea	Direct synthesis of a solid calcium-silicate-hydrate (C-S-H)	554-565
Zhang, Xiuli / Deng, Zongcai	Durability of GFRP bars in the simulated marine environment and concrete environment under sustained compressive stress	299-309
Barnat-Hunek, Danuta / Szymańska-Chargot, Monika / Jarosz-Hadam, Monika / Łagód, Grzegorz	Effect of cellulose nanofibrils and nanocrystals on physical properties of concrete	1-11
Shen, Dejian / Kang, Jiacheng / Yi, Xijun / Zhou, Liukun / Shi, Xiang	Effect of double hooked-end steel fiber on early-age cracking potential of high strength concrete in restrained ring specimens	1095-1105
Saboo, Nikhil / Shivhare, Shekhar / Kori, Krishna Kumar / Chandrappa, Anush K.	Effect of fly ash and metakaolin on pervious concrete properties	322-328
Zou, Dinghua / Wang, Ke / Li, Haiyan / Guan, Xuemao	Effect of LiAl-layered double hydroxides on hydration of calcium sulfoaluminate cement at low temperature	910-917
Huang, Yijie / Li, Xiaowei / Lu, Yu / Wang, Haichao / Wang, Qing / Sun, Huangsheng / Li, Dayong	Effect of mix component on the mechanical properties of coral concrete under axial compression	736-754
Jirawattanasomkul, Tidarut / Ueda, Tamon / Likitlersuang, Suched / Zhang, Dawei / Hanwiboonwat, Nat / Wuttiwannasak, Nattamet / Horsangchai, Krittapon	Effect of natural fibre reinforced polymers on confined compressive strength of concrete	156-164
Rissanen, Jouni / Giosuè, Chiara / Ohenoja, Katja / Kinnunen, Paivo / Marcellini, Mirco / Ruello, Maria Letizia / Tittarelli, Francesca / Illikainen, Mirja	The effect of peat and wood fly ash on the porosity of mortar	421-430
Ren, Jun / Fang, Yunhui / Ma, Qianmin / Tan, Hongbo / Luo, Shuqiong / Liu, Min / Wang, Xianfeng	Effect of storage condition on basic performance of polycarboxylate superplasticiser system incorporated sodium gluconate	852-862
Dourado, N. / de Moura, M. F. S. F.	Effect of temperature on the fracture toughness of wood under mode I quasi-static loading	863-869
Madandoust, Rahmat / Kazemi, Mostafa / Talebi, Pouyan Khakpour / de Brito, Jorge	Effect of the curing type on the mechanical properties of lightweight concrete with polypropylene and steel fibres	1038-1052
Li, Wanzhao / Mei, Changtong / van den Bulcke, Jan / Van Acker, Joris	The effect of water sorption/desorption on fatigue deflection of OSB	1196-1203
Wang, Fengchi / Ping, Xiaowei / Zhou, Jinghai / Kang, Tianbei	Effects of crumb rubber on the frost resistance of cement-soil	120-132
Zhang, Xiaogang / Zuo, Guiqin / Memon, Shazim Ali / Xing, Feng / Sun, Hongfang	Effects of initial defects within mortar cover on corrosion of steel and cracking of cover using X-ray computed tomography	265-277
Jiang, Liangpeng / He, Chunxia / Fu, Jingjing / Xu, Dezhang	Enhancement of wear and corrosion resistance of polyvinyl chloride/sorghum straw-based composites in cyclic sea water and acid rain conditions	133-141
Asib, Abu Sufian Mohammad / Romero, Pedro / Safazadeh, Faramarz	An equivalence between methods of aging for determining the low-temperature performance of hot-mix asphalt concrete mixtures containing reclaimed asphalt pavement	198-209
Liu, Shengjie / Peng, Aihong / Zhou, Shengbo / Wu, Jiantao / Xuan, Weian / Liu, Wu	Evaluation of the ageing behaviour of waste engine oil-modified asphalt binders	394-408
Loukil, Marwa / Hassine, Wiem Ben / Limam, Oualid / Kotronis, Panagiotis	Experimental determination of GFRC tensile parameters from three-point bending tests using an analytical damage model	477-490
Tabrizi, Mohammad Karamad / Abrishami, Saeed / Seyedi Hosseininia, Ehsan / Sharifi, Sohrab / Ghorbani, Saeid	Experimental investigation on the behavior of fine-grained soils containing waste rubber tires under repeated and static loading using direct shear apparatus	106-119
Guo, Yihong / Hu, Xinyu / Lv, Jianfu	Experimental study on the resistance of basalt fibre-reinforced concrete to chloride penetration	142-155
Li, Yuzong / Liu, Caihua	Experimental study on the shear behavior of fully grouted bolts	1123-1134
Xu, Xiangzhao / Ma, Tianbao / Ning, Jianguo	Failure analytical model of reinforced concrete slab under impact loading	679-691
Cao, Shuai / Yilmaz, Erol / Song, Weidong	Fiber type effect on strength, toughness and microstructure of early age cemented tailings backfill	44-54
Liu, Shuguang / Bai, Ru / Zhang, Ju / Yan, Changwang / Wang, Xiaoxiao	Flexural load-deflection performance of polyvinyl alcohol fiber reinforced cementitious composite beams	1135-1144
Jiao, Pengcheng / Roy, Manish / Barri, Kaveh / Zhu, Ronghua / Ray, Indrajit / Alavi, Amir H.	High-performance fiber reinforced concrete as a repairing material to normal concrete structures: Experiments, numerical simulations and a machine learning-based prediction model	1167-1181
Jing, Guoqing / Ding, Dong / Liu, Xiang	High-speed railway ballast flight mechanism analysis and risk management – A literature review	629-642
Feys, Dimitri	How much is bulk concrete sheared during pumping?	341-351
Qi, Yanhan / Li, Shucai / Li, Zhaofeng / Zhang, Jian / Li, Haiyan	Hydration effect of sodium silicate on cement slurry doped with xanthan	976-985
Omairey, Eman L. / Zhang, Yuqing / Al-Malaika, Sahar / Sheena, Husam / Gu, Fan	Impact of anti-ageing compounds on oxidation ageing kinetics of bitumen by infrared spectroscopy analysis	755-764
Shen, Dejian / Liu, Ci / Feng, Zhizhuo / Zhu, Shuaishuai / Liang, Chen	Influence of ground granulated blast furnace slag on the early-age anti-cracking property of internally cured concrete	233-243
Li, Chunguang / Zhou, Annan / Zeng, Jianfeng / Liu, Zhenzhong / Zhang, Zhijun	Influence of MFPSA on mechanical and hydrophobic behaviour of fiber cement products	1016-1029
de França, Marylinda Santos / Cazacliu, Bogdan / Cardoso, Fábio Alonso / Pileggi, Rafael Giuliano	Influence of mixing process on mortars rheological behavior through rotational rheometry	81-90
Gupta, Trilok / Kothari, Shubham / Siddique, Salman / Sharma, Ravi K. / Chaudhary, Sandeep	Influence of stone processing dust on mechanical, durability and sustainability of concrete	918-927
Xu, Peng / Jiang, Linhua / Guo, Ming-Zhi / Zha, Jie / Chen, Lei / Chen, Chen / Xu, Ning	Influence of sulfate salt type on passive film of steel in simulated concrete pore solution	352-359
Okeyinka, Oriyomi M. / Oloke, David A. / Adebisi, Waris A. / Ayininuola, Gbenga M.	Investigation into the applicability of brewery sludge residue-ash as a base material for geopolymer concrete	28-32
Tian, Jun / Wu, Xiaowei / Zheng, Yu / Hu, Shaowei / Du, Yinfei / Wang, Wenwei / Sun, Can / Zhang, Lifei	Investigation of interface shear properties and mechanical model between ECC and concrete	12-27
Lv, Songtao / Yuan, Jiang / Liu, Chaochao / Wang, Jiaqing / Li, Jianglong / Zheng, Jianlong	Investigation of the fatigue modulus decay in cement stabilized base material by considering the difference between compressive and tensile modulus	491-502
Ghanoon, Seyed Alireza / Tanzadeh, Javad	Laboratory evaluation of nano-silica modification on rutting resistance of asphalt Binder	1074-1082
Wang, Shaoquan / Yan, Kezhen / Ge, Dongdong / Hong, Zheng	Laboratory research on the performance of stress-absorption interlayer (SAI) of waste tire rubber and amorphous ploy alpha olefin modified asphalt	830-840
Amini, Omid / Ghasemi, Mojtaba	Laboratory study of the effects of using magnesium slag on the geotechnical properties of cement stabilized soil	409-420
Fuchs, Rita / Mittermayr, Florian / Baldermann, Claudia / Köhler, Stephan J. / Leis, Albrecht / Wagner, Hanns / Dietzel, Martin	Leaching behavior of carbonate bearing backfill material – An experimental and modelling approach	254-264
Sun, Guoqiang / Sun, Daquan / Guarin, Alvaro / Ma, Jianmin / Chen, Feng / Ghafooriroozbahany, Ehsan	Low temperature self-healing character of asphalt mixtures under different fatigue damage degrees	870-882
Ma, Biao / Wang, Xiao-qing / Zhou, Xue-yan / Wei, Kun / Huang, Wei	Measurement and analysis of thermophysical parameters of the epoxy resin composites shape-stabilized phase change material	368-376
Li, Ben / Wang, Zhong-Rui / Liu, Hong-Bo / Liu, Xiao-Zhou / Li, Hang / Chen, Xiao	Meso-mechanical research on alkali-silica reaction expansion in Pyrex glass and silica sand at different temperatures and curing times	377-393
Ullah, Saad / Tanyu, Burak F.	Methodology to develop design guidelines to construct unbound base course with reclaimed asphalt pavement (RAP)	463-476
Van, Nguyen Duc / Choi, Hyeonggil / Hama, Yukio	Modeling early age hydration reaction and predicting compressive strength of cement paste mixed with expansive additives	994-1007
Parisi, Fulvio / Balestrieri, Claudio / Varum, Humberto	Nonlinear finite element model for traditional adobe masonry	450-462
Jassam, Taha M. / Kien-Woh, Kow / ng yang-zhi, Jason / Lau, Bonnie / Yaseer, M. M. M.	Novel cement curing technique by using controlled release of carbon dioxide coupled with nanosilica	692-704
Yang, Zhangbin / Qi, Yanli / Zhang, Jun	A novel perspective for reflective cooling composites: Influence of the difference between the effective refractive index of polymeric matrix and inorganic functional particles	928-938
Liu, Cheng / Qian, Chen / Qian, Rusheng / Liu, Zhiyong / Qiao, Hongxia / Zhang, Yunsheng	Numerical prediction of effective diffusivity in hardened cement paste between aggregates using different shapes of cement powder	806-816
Jalal, Mostafa / Nassir, Navid / Jalal, Hamid / Arabali, Poura	On the strength and pulse velocity of rubberized concrete containing silica fume and zeolite: Prediction using multivariable regression models	530-543
Brás, Ana / Antunes, Ana / Laborel-Préneron, Aurélie / Ralegaonkar, Rahul / Shaw, Andy / Riley, Mike / Faria, Paulina	Optimisation of bio-based building materials using image analysis method	544-553
Goyal, Arpit / Pouya, Homayoon Sadeghi / Ganjian, Eshmaiel	Performance assessment of specialist conductive paint for cathodic protection of steel in reinforced concrete structures	1083-1094
Hwang, Chao-Lung / Yehualaw, Mitiku Damtie / Vo, Duy-Hai / Huynh, Trong-Phuoc / Largo, Alessandro	Performance evaluation of alkali activated mortar containing high volume of waste brick powder blended with ground granulated blast furnace slag cured at ambient temperature	657-667
Saleh, Hosam M. / El-Sheikh, Said M. / Elshereafy, Elsayed E. / Essa, Adel K.	Performance of cement-slag-titanate nanofibers composite immobilized radioactive waste solution through frost and flooding events	221-232
Noolu, Venkatesh / Mudavath, Heeralal / Pillai, Rakesh J. / Yantrapalli, Sudheer Kumar	Permanent deformation behaviour of black cotton soil treated with calcium carbide residue	441-449
Song, Qiulei / Yu, Rui / Shui, Zhonghe / Wang, Yunyao / Rao, Suduan / Wu, Shuo / He, Yongjia	Physical and chemical coupling effect of metakaolin induced chloride trapping capacity variation for Ultra High Performance Fibre Reinforced Concrete (UHPFRC)	765-774
Yang, Long / Yao, Zhishu / Xue, Weipei / Wang, Xuesong / Kong, Weihao / Wu, Taoli	Preparation, performance test and microanalysis of hybrid fibers and microexpansive high-performance shaft lining concrete	431-440
Liu, Pengfei / Hu, Jing / Canon Falla, Gustavo / Wang, Dawei / Leischner, Sabine / Oeser, Markus	Primary investigation on the relationship between microstructural characteristics and the mechanical performance of asphalt mixtures with different compaction degrees	784-793
Bamaga, S. O. / Tahir, M. M. / Tan, C. S. / Shek, P. N. / Aghlara, R.	Push-out tests on three innovative shear connectors for composite cold-formed steel concrete beams	288-298
Gautham, S. / Sasmal, Saptarshi	Recent Advances in Evaluation of intrinsic mechanical properties of cementitious composites using nanoindentation technique	883-897
Nogueira, Régis Lopes / Barbosa Soares, Jorge / de Aguiar Soares, Sandra	Rheological evaluation of cotton seed oil fatty amides as a rejuvenating agent for RAP oxidized asphalts	1145-1153
Rifaai, Yasser / Yahia, Ammar / Mostafa, Ahmed / Aggoun, Salima / Kadri, El-Hadj	Rheology of fly ash-based geopolymer: Effect of NaOH concentration	583-594
Kim, Young-Sang / Tran, Thien Quoc / Kang, Gyeong-o / Do, Tan Manh	Stabilization of a residual granitic soil using various new green binders	724-735
Kim, Taewan / Kim, In-Tae / Seo, Ki-Young / Park, Hyun-Jae	Strength and pore characteristics of OPC-slag cement paste mixed with polyaluminum chloride	616-628
Shekhawat, Poonam / Sharma, Gunwant / Singh, Rao Martand	Strength behavior of alkaline activated eggshell powder and flyash geopolymer cured at ambient temperature	1112-1122
Yücel, Hasan Erhan / Özcan, Sümeyye	Strength characteristics and microstructural properties of cement mortars incorporating synthetic wollastonite produced with a new technique	165-176
Xu, Weiying / Yang, Shutong / Xu, Chengji / Sun, He	Study on fracture properties of alkali-activated slag seawater coral aggregate concrete	91-105
Wu, Kai / Long, Jiangfeng / Xu, Linglin / De Schutter, Geert	A study on the chloride diffusion behavior of blended cement concrete in relation to aggregate and ITZ	1063-1073
Kuang, Dongliang / Liu, Wenchang / Xiao, Yue / Wan, Miao / Yang, Lifeng / Chen, Huaxin	Study on the rejuvenating mechanism in aged asphalt binder with mono-component modified rejuvenators	986-993
Tang, Jin / Wei, Shuaifei / Li, Weifeng / Ma, Suhua / Ji, Penghao / Shen, Xiaodong	Synergistic effect of metakaolin and limestone on the hydration properties of Portland cement	177-184
Ding, Cong / Guo, Li Ping / Chen, Bo	Theoretical analysis on optimal fiber-matrix interfacial bonding and corresponding fiber rupture effect for high ductility cementitious composites	841-851
He, Chao / Zhou, Shunhua / Guo, Peijun / Di, Honggui / Zhang, Xiaohui	A theoretical model on the influence of ring joint stiffness on dynamic responses from underground tunnels	69-80
Mohit, Mehdi / Sharifi, Yasser	Thermal and microstructure properties of cement mortar containing ceramic waste powder as alternative cementitious materials	643-656
Lee, Hwayoung / Yang, Sungwoong / Wi, Seunghwan / Kim, Sumin	Thermal transfer behavior of biochar-natural inorganic clay composite for building envelope insulation	668-678
Lv, Songtao / Xia, Chengdong / You, Lingyun / Wang, XiaoFeng / Li, Jianglong / Zheng, Jianlong	Unified fatigue characteristics model for cement-stabilized macadam under various loading modes	775-783
Graupner de Godoy, Luis Gabriel / Rohden, Abrahão Bernardo / Garcez, Mônica Regina / da Costa, Eugênio Bastos / Da Dalt, Silvana / de Oliveira Andrade, Jairo José	Valorization of water treatment sludge waste by application as supplementary cementitious material	939-950

Informations
sur cette fiche
IssueID
28787
Publié(e) le:
09.07.2019
Modifié(e) le:
04.08.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - octobre 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - octobre 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.