Construction and Building Materials - juillet 2019

Publié:	juillet 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Wang, Yao / Peng, Yijiang / Kamel, Mahmoud M. A. / Ying, Liping	2D numerical investigation on damage mechanism of recycled aggregate concrete prism	91-99
Gu, Qingheng / Ma, Qing / Tan, Yunliang / Jia, Zhichuang / Zhao, Zenghui / Huang, Dongmei	Acoustic emission characteristics and damage model of cement mortar under uniaxial compression	377-385
Morcillo, M. / Díaz, I. / Cano, H. / Chico, B. / de la Fuente, D.	Atmospheric corrosion of weathering steels. Overview for engineers. Part I: Basic concepts	723-737
Dong, Zhiqiang / Wu, Gang / Zhao, Xiao-Ling / Zhu, Hong / Shao, Xinxing	Behaviors of hybrid beams composed of seawater sea-sand concrete (SWSSC) and a prefabricated UHPC shell reinforced with FRP bars	32-42
Zhao, Yanjing / Wang, Xiaowei / Jiang, Jiwang / Zhou, Lan	Characterization of interconnectivity, size distribution and uniformity of air voids in porous asphalt concrete using X-ray CT scanning images	182-193
Arabzadeh, Ali / Sassani, Alireza / Ceylan, Halil / Kim, Sunghwan / Gopalakrishnan, Kasthurirangan / Taylor, Peter C.	Comparison between cement paste and asphalt mastic modified by carbonaceous materials: Electrical and thermal properties	121-130
Han, Tielin / Wang, Xianfeng / Li, Dongfeng / Li, Dawang / Han, Ningxu / Xing, Feng	Damage and degradation mechanism for single intermittent cracked mortar specimens under a combination of chemical solutions and dry-wet cycles	567-581
Esmaeili, Niloofar / Hamedi, Gholam Hossein / Khodadadi, Mojtaba	Determination of the stripping process of asphalt mixtures and the effective mix design and SFE parameters on its different phases	167-181
Meza, Alejandro / Siddique, Salman	Effect of aspect ratio and dosage on the flexural response of FRC with recycled fiber	286-291
Li, Lin / Wang, Ru / Zhang, Shaokang	Effect of curing temperature and relative humidity on the hydrates and porosity of calcium sulfoaluminate cement	627-636
Shumuye, Eskinder Desta / Zhao, Jun / Wang, Zike	Effect of fire exposure on physico-mechanical and microstructural properties of concrete containing high volume slag cement	447-458
Kachouh, Nancy / El-Hassan, Hilal / El-Maaddawy, Tamer	Effect of steel fibers on the performance of concrete made with recycled concrete aggregates and dune sand	348-359
Chen, Xiaoyang / Zhang, Tingting / Bi, Wanli / Cheeseman, Christopher	Effect of tartaric acid and phosphoric acid on the water resistance of magnesium oxychloride (MOC) cement	528-536
Khan, M. Iqbal / Fares, Galal	Effect of temperature on strain capacity and cracking system of SHCC of different workability and SAP contents	337-347
Jia, Wenbao / Wang, Yufan / Hei, Daqian / Chen, Ruoyu / Li, Shujing	Effect of the amount of andalusite addition on the properties of lightweight porous reticulated materials	257-264
Poletti, E. / Vasconcelos, G. / Branco, J. M. / Isopescu, B.	Effects of extreme environmental exposure conditions on the mechanical behaviour of traditional carpentry joints	61-78
Li, Yunliang / He, Xin / Sun, Haijiao / Tan, Yiqiu	Effects of freeze-thaw on dynamic mechanical behavior of cement emulsified asphalt composite binder	608-616
Xiao, Huigang / Zhang, Fengling / Liu, Rui / Zhang, Rongling / Liu, Zhiguo / Liu, Hongxia	Effects of pozzolanic and non-pozzolanic nanomaterials on cement-based materials	1-9
Golewski, Grzegorz Ludwik	Estimation of the optimum content of fly ash in concrete composite based on the analysis of fracture toughness tests using various measuring systems	142-155
Vassaux, S. / Gaudefroy, V. / Boulangé, L. / Pévère, A. / Michelet, A. / Barragan-Montero, V. / Mouillet, V.	Experimental investigation of blending phenomena in intergranular zones of recycled asphalt mixtures using customized infrared imaging and stage extraction methods	234-245
Li, Hong-Nan / Liu, Peng-Fei / Li, Chao / Li, Gang / Zhang, Hao	Experimental research on dynamic mechanical properties of metal tailings porous concrete	20-31
da Costa, F. B. P. / Righi, D. P. / Graeff, A. G. / da Silva Filho, L. C. P.	Experimental study of some durability properties of ECC with a more environmentally sustainable rice husk ash and high tenacity polypropylene fibers	505-513
Jiang, Haiqiang / Fall, Mamadou / Li, Yuanhui / Han, Jing	An experimental study on compressive behaviour of cemented rockfill	10-19
Dong, Hongying / Song, Yu / Cao, Wanlin / Sun, Wenjuan / Zhang, Jianwei	Flexural bond behavior of reinforced recycled aggregate concrete	514-527
Kang, Sung-Hoon / Jeong, Yeonung / Tan, Kiang Hwee / Moon, Juhyuk	High-volume use of limestone in ultra-high performance fiber-reinforced concrete for reducing cement content and autogenous shrinkage	292-305
Mao, Jianghong / Jin, Weiliang / Zhang, Jun / Xia, Jin / Fan, Weijie / Xu, Yidong	Hydrogen embrittlement risk control of prestressed tendons during electrochemical rehabilitation based on bidirectional electro-migration	582-591
Anitha, Rajan / Chitra, Subramanian / Hemapriya, Venkatesan / Chung, Ill-Min / Kim, Seung-Hyun / Prabakaran, Mayakrishnan	Implications of eco-addition inhibitor to mitigate corrosion in reinforced steel embedded in concrete	246-256
Hussain, Tasaddaq / Ali, Majid	Improving the impact resistance and dynamic properties of jute fiber reinforced concrete for rebars design by considering tension zone of FRC	592-607
Attaran Dovom, Hamed / Mohammadzadeh Moghaddam, Abolfazl / Karrabi, Mohsen / Shahnavaz, Bahar	Improving the resistance to moisture damage of cold mix asphalt modified by eco-friendly Microbial Carbonate Precipitation (MCP)	131-141
Xue, Gaili / Yilmaz, Erol / Song, Weidong / Yilmaz, Elif	Influence of fiber reinforcement on mechanical behavior and microstructural properties of cemented tailings backfill	275-285
Santha Kumar, G.	Influence of fluidity on mechanical and permeation performances of recycled aggregate mortar	404-412
Ba, Guangzhong / Miao, Jijun / Zhang, Weiping / Liu, Jialiang	Influence of reinforcement corrosion on fire performance of reinforced concrete beams	738-747
Shen, Yanjun / Wang, Yongzhi / Yang, Yang / Sun, Qiang / Luo, Tao / Zhang, Huan	Influence of surface roughness and hydrophilicity on bonding strength of concrete-rock interface	156-166
Honghai, Liu / Jie, Jia / Nieyangzi, Liu / Zexiang, Zeng	Influence of the mixing time on the anti-freezing performance of chloride-based asphalt mixtures	637-642
Lin, Yougui / Karadelis, John N.	Interfacial fracture toughness of composite concrete beams	413-423
Yang, Bing / Li, Hui / Zhang, Hengji / Xie, Ning / Zhou, Haonan	Laboratorial investigation on effects of microscopic void characteristics on properties of porous asphalt mixture	434-446
Ziari, Hasan / Moniri, Ali	Laboratory evaluation of the effect of synthetic Polyolefin-glass fibers on performance properties of hot mix asphalt	459-468
Mirdad, Md Abdul Hamid / Chui, Ying Hei	Load-slip performance of Mass Timber Panel-Concrete (MTPC) composite connection with Self-tapping screws and insulation layer	696-708
Cao, Shuai / Yilmaz, Erol / Song, Weidong / Yilmaz, Elif / Xue, Gaili	Loading rate effect on uniaxial compressive strength behavior and acoustic emission properties of cemented tailings backfill	313-324
He, Zhen / Jia, Yaodong / Wang, Sam / Mahoutian, Mehrdad / Shao, Yixin	Maximizing CO2 sequestration in cement-bonded fiberboards through carbonation curing	51-60
Raheem, Ahmed H. Abdel / Mahdy, M. / Mashaly, Asmaa A.	Mechanical and fracture mechanics properties of ultra-high-performance concrete	561-566
Yu, Yujie / Lan, Lifeng / Ding, Faxing / Wang, Liping	Mechanical properties of hot-rolled and cold-formed steels after exposure to elevated temperature: A review	360-376
Gutiérrez, Nayar C. / Petersen, Javier / Arias, Paula / Reyes, Jesús	A minimum building information unit for immediate response in disaster situations	652-664
Carević, Vedran / Ignjatović, Ivan / Dragaš, Jelena	Model for practical carbonation depth prediction for high volume fly ash concrete and recycled aggregate concrete	194-208
Du, Chuanxin / Yang, Gang / Zhang, Tingting / Yang, Qing	Multiscale study of the influence of promoters on low-plasticity clay stabilized with cement-based composites	537-548
Su, Ray Kai Leung / Zhang, Yanlong	A novel elastic-body-rotation model for concrete cover spalling caused by non-uniform corrosion of reinforcement	549-560
Zhang, Hongru / Ji, Tao / He, Bingjian / He, Lingwei	Performance of ultra-high performance concrete (UHPC) with cement partially replaced by ground granite powder (GGP) under different curing conditions	469-482
Debnath, Barnali / Sarkar, Partha Pratim	Permeability prediction and pore structure feature of pervious concrete using brick as aggregate	643-651
Hasani, Mohammad / Tarighat, Amir	Proposing new pozzolanic activity index based on water adsorption energy via molecular dynamics simulations	492-504
Yang, Tao / Zhang, Zuhua / Zhu, Huajun / Gao, Xuan / Dai, Chendong / Wu, Qisheng	Re-examining the suitability of high magnesium nickel slag as precursors for alkali-activated materials	109-120
Li, Runfeng / Zhou, Yang / Li, Cuiwei / Li, Shibo / Huang, Zhenying	Recycling of industrial waste iron tailings in porous bricks with low thermal conductivity	43-50
Shu, Zhan / Li, Zheng / Yu, Xiangsheng / Zhang, Jing / He, Minjuan	Rotational performance of glulam bolted joints: Experimental investigation and analytical approach	675-695
Lin, Hongwei / Zhao, Yuxi / Feng, Peng / Ye, Hailong / Ožbolt, Jośko / Jiang, Cheng / Yang, Jia-qi	State-of-the-art review on the bond properties of corroded reinforcing steel bar	216-233
Yang, Deqiang / Yan, Changwang / Liu, Shuguang / Zhang, Ju / Hu, Zhichao	Stress-strain constitutive model of concrete corroded by saline soil under uniaxial compression	665-674
Li, Zuzhong / Zhang, Yayun / Zhao, Hongyan / Chen, Huaxin / He, Rui	Structure characteristics and composition of hydration products of coal gasification slag mixed cement and lime	265-274
Kong, Dequan / Wan, Rong / Chen, Jianxun / Jing, Yanlin / Huang, Weiming / Wang, Yonghui	The study on engineering characteristics and compression mechanisms of typical historical earthen site soil	386-403
Ma, Suhua / Li, Weifeng / Shen, Xiaodong	Study on the physical and chemical properties of Portland cement with THEED	617-626
Shao, Jiahu / Gao, Jianming / Zhao, Yasong / Chen, Xuemei	Study on the pozzolanic reaction of clay brick powder in blended cement pastes	209-215
Rivera, Jhonathan F. / Cristelo, Nuno / Fernández-Jiménez, Ana / Mejía de Gutiérrez, Ruby	Synthesis of alkaline cements based on fly ash and metallurgic slag: Optimisation of the SiO2/Al2O3 and Na2O/SiO2 molar ratios using the response surface methodology	424-433
Chang, Seong Jin / Wi, Seunghwan / Kim, Sumin	Thermal bridging analysis of connections in cross-laminated timber buildings based on ISO 10211	709-722
Chithambaram, S. Jeeva / Kumar, Sanjay / Prasad, M. M.	Thermo-mechanical characteristics of geopolymer mortar	100-108
Gao, Yanhong / Zheng, Yingying / Zhang, Junzhi / Xu, Shengxuan / Zhou, Xiaoyun / Zhang, Yurong	Time-dependent corrosion process and non-uniform corrosion of reinforcement in RC flexural members in a tidal environment	79-90
Walubita, Lubinda F. / Mahmoud, Enad / Lee, Sang Ick / Carrasco, Gisel / Komba, Julius J. / Fuentes, Luis / Nyamuhokya, Tito P.	Use of grid reinforcement in HMA overlays – A Texas field case study of highway US 59 in Atlanta District	325-336
Fattahi Amirdehi, H. R. / Aliha, M. R. M. / Moniri, Ali / Torabi, A. R.	Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results – A statistical analysis	483-491
Sharifi, Naser P. / Jewell, Robert B. / Duvallet, Tristana / Oberlink, Anne / Robl, Tom / Mahboub, Kamyar C. / Ladwig, Ken J.	The utilization of sulfite-rich Spray Dryer Absorber Material in portland cement concrete	306-312
Bukauskas, Aurimas / Mayencourt, Paul / Shepherd, Paul / Sharma, Bhavna / Mueller, Caitlin / Walker, Pete / Bregulla, Julie	Whole timber construction: A state of the art review	748-769

Informations
sur cette fiche
IssueID
28329
Publié(e) le:
17.04.2019
Modifié(e) le:
26.07.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - juillet 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - juillet 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.