Construction and Building Materials - juin 2019

Publié:	juin 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Piña Ramírez, Carolina / Merino, Mercedes del Río / Viñas Arrebola, Carmen / Vidales Barriguete, Alejandra / Kosior-Kazberuk, Marta	Analysis of the mechanical behaviour of the cement mortars with additives of mineral wool fibres from recycling of CDW	56-62
Giordani, Caroline / Masuero, Angela Borges	Blended mortars: Influence of the constituents and proportioning in the fresh state	574-587
Wang, Xin / Su, Chang / Deng, Wenjie / Wu, Zhishen	Bond behavior between corrugated BFRP shell and concrete under monotonic and cyclic loads	596-606
Yuan, Cheng / Chen, Wensu / Pham, Thong M. / Hao, Hong	Bond behaviour between hybrid fiber reinforced polymer sheets and concrete	93-110
Yan, Jia-Bao / Xie, Wenjun / Zhang, Lingxin / Lin, Xu-Chuan	Bond behaviour of concrete-filled steel tubes at the Arctic low temperatures	118-131
Huang, Lepeng / Hua, Jianmin / Kang, Ming / Zhou, Fengbin / Luo, Qiming	Capillary tension theory for predicting shrinkage of concrete restrained by reinforcement bar in early age	63-70
Humbert, P. S. / Castro-Gomes, J. P. / Savastano, H.	Clinker-free CO2 cured steel slag based binder: Optimal conditions and potential applications	413-421
Limaiem, Mariem / Ghorbel, Elhem / Limam, Oualid	Comparative experimental study of concrete reparation with carbon epoxy & bio-resourced composites	312-323
Mughal, Ubaid Ahmad / Saleem, Muhammad Azhar / Abbas, Safeer	Comparative study of ferrocement panels reinforced with galvanized iron and polypropylene meshes	40-47
Wu, Bo / Jin, Hemao	Compressive fatigue behavior of compound concrete containing demolished concrete lumps	140-156
Duffó, G. S. / Farina, S. B. / Rodríguez, F. M. Schulz	Corrosion behaviour of non-ferrous metals embedded in mortar	548-554
Zhang, Hongru / Zhao, Yuxi	Cracking of reinforced recycled aggregate concrete beams subjected to loads and steel corrosion	364-379
Li, Yue / Shi, Tongfei / Li, Yaqiang / Bai, Weiliang / Lin, Hui	Damage of magnesium potassium phosphate cement under dry and wet cycles and sulfate attack	111-117
Hu, Xiaopeng / Peng, Gang / Niu, Ditao / Zhao, Nan	Damage study on service performance of early-age frozen concrete	22-31
Wang, Yi / Li, Xiaoda / Li, Junhui / Wang, Qiang / Xu, Bing / Deng, Jun	Debonding damage detection of the CFRP-concrete interface based on piezoelectric ceramics by the wave-based method	514-524
Sun, Dandan / Wu, Kai / Shi, Huisheng / Miramini, Saeed / Zhang, Lihai	Deformation behaviour of concrete materials under the sulfate attack	232-241
Kammoun, Zied / Trabelsi, Abderraouf	Development of lightweight concrete using prickly pear fibres	269-277
Zhang, Zhongya / Jin, Xiaoguang / Lin, Shaoze / Bi, Jing	Direct shear behavior of sulfate-exposed shotcrete: Experimental and modelling research	607-619
Sañudo, Roberto / Miranda, Marina / García, Carlos / García-Sanchez, David	Drainage in railways	391-412
Zhu, Pinghua / Hao, Yali / Liu, Hui / Wei, Da / Liu, Shaofeng / Gu, Lei	Durability evaluation of three generations of 100% repeatedly recycled coarse aggregate concrete	442-450
Wang, Yuyin / Liu, Faqi / Xu, Liangfu / Zhao, Hui	Effect of elevated temperatures and cooling methods on strength of concrete made with coarse and fine recycled concrete aggregates	540-547
Yoo, Doo-Yeol / Kim, Jae-Jin / Park, Jung-Jun	Effect of fiber spacing on dynamic pullout behavior of multiple straight steel fibers in ultra-high-performance concrete	461-472
Wang, Haifeng / Wu, Dingyan / Mei, Zhen	Effect of fly ash and limestone powder on inhibiting alkali aggregate reaction of concrete	620-626
Li, Zhe / Liu, Lulu / Yan, Shihao / Zhang, Mengke / Xia, Jingjing / Xie, Yongli	Effect of freeze-thaw cycles on mechanical and porosity properties of recycled construction waste mixtures	347-363
Min, Chendi / Li, Xibing / He, Suya / Zhou, Shitong / Zhou, Yanan / Yang, Shan / Shi, Ying	Effect of mixing time on the properties of phosphogypsum-based cemented backfill	564-573
Diab, Ahmed M. / Elyamany, Hafez E. / Abd Elmoaty, Abd Elmoaty M. / Sreh, Muftah M.	Effect of nanomaterials additives on performance of concrete resistance against magnesium sulfate and acids	210-231
Pais, Jorge / Lo Presti, Davide / Santos, Caio / Thives, Liseane / Pereira, Paulo	The effect of prolonged storage time on asphalt rubber binder properties	242-255
Lin, Youzhu / Yan, Jiachuan / Wang, Zefang / Fan, Feng / Zou, Chaoying	Effect of silica fumes on fluidity of UHPC: Experiments, influence mechanism and evaluation methods	451-460
Althoey, Fadi / Farnam, Yaghoob	The effect of using supplementary cementitious materials on damage development due to the formation of a chemical phase change in cementitious materials exposed to sodium chloride	685-695
Gorospe, Karla / Booya, Emad / Ghaednia, Hossein / Das, Sreekanta	Effect of various glass aggregates on the shrinkage and expansion of cement mortar	301-311
Huseien, Ghasan Fahim / Sam, Abdul Rahman Mohd / Shah, Kwok Wei / Mirza, Jahangir / Tahir, Mahmood Md.	Evaluation of alkali-activated mortars containing high volume waste ceramic powder and fly ash replacing GBFS	78-92
Socoloski, Rafaela Falcão / Masuero, Angela Borges	Evaluation of the efficiency of the treatment for rising damp on walls through the insertion of chemical barriers by gravity	660-672
Chinchillas-Chinchillas, Manuel J. / Orozco-Carmona, Víctor M. / Gaxiola, Alberto / Alvarado-Beltrán, Clemente G. / Pellegrini-Cervantes, Manuel J. / Baldenebro-López, Francisco J. / Castro-Beltrán, Andrés	Evaluation of the mechanical properties, durability and drying shrinkage of the mortar reinforced with polyacrylonitrile microfibers	32-39
Nguyen, Thanh-Tung / Weiler, Michael / Waldmann, Danièle	Experimental and numerical analysis of early age behavior in non-reinforced concrete	499-513
Zheng, Xiaohong / Wan, Baolin / Huang, Peiyan / Huang, Jinlin	Experimental study of hybrid strengthening technique using carbon fiber laminates and steel plates for reinforced concrete slabs	324-337
Chen, Lihua / Wang, Shiye / Yin, Chao / Li, Shutin	Experimental study on constitutive relationship between checkered steel and concrete	483-498
Li, Liang / Zhang, Renbo / Jin, Liu / Du, Xiuli / Wu, Jun / Duan, Wenhui	Experimental study on dynamic compressive behavior of steel fiber reinforced concrete at elevated temperatures	673-684
Zhi-ping, Zeng / Jun-dong, Wang / Shi-wen, Shen / Ping, Li / Shuaibu, Abdulmumin Ahmed / Wei-dong, Wang	Experimental study on evolution of mechanical properties of CRTS III ballastless slab track under fatigue load	639-649
Zhao, Binna / Lei, Dong / Fu, Jianjun / Yang, Liqun / Xu, Wenxiang	Experimental study on micro-damage identification in reinforced concrete beam with wavelet packet and DIC method	338-346
Xia, Wei-Yi / Du, Yan-Jun / Li, Fa-Sheng / Guo, Guan-Lin / Yan, Xiu-Lan / Li, Chun-Ping / Arulrajah, Arul / Wang, Fei / Wang, Shui	Field evaluation of a new hydroxyapatite based binder for ex-situ solidification/stabilization of a heavy metal contaminated site soil around a Pb-Zn smelter	278-288
Wang, Xiaomeng / Petrů, Michal	Freeze–thaw resistance of epoxy/concrete interface evaluated by a novel wedge splitting test	434-441
Shubbar, Ali Abdulhussein / Sadique, Monower / Kot, Patryk / Atherton, William	Future of clay-based construction materials – A review	172-187
El Ouali, A. / El Rhafiki, T. / Kousksou, T. / Allouhi, A. / Mahdaoui, M. / Jamil, A. / Zeraouli, Y.	Heat transfer within mortar containing micro-encapsulated PCM: Numerical approach	422-433
Del Zoppo, Marta / Di Ludovico, Marco / Balsamo, Alberto / Prota, Andrea	In-plane shear capacity of tuff masonry walls with traditional and innovative Composite Reinforced Mortars (CRM)	289-300
Rashwan, Mohammed A. / Lasheen, El Saeed R. / Shalaby, Basel N.	Incorporation of metagabbro as cement replacement in cement-based materials: A role of mafic minerals on the physico-mechanical and durability properties	256-268
Mezhov, Alexander / Pott, Ursula / Stephan, Dietmar / Kovler, Konstantin	Influence of mechanical activation of fly ash in presence of polynaphthalene sulfonate superplasticizer on rheology and hydration kinetics of cement – fly ash pastes	380-390
Cui, Shuwan / Shi, Yonghua / Cui, Yanxin / Zhu, Tao	The influence of microstructure and chromium nitride precipitations on the mechanical and intergranular corrosion properties of K-TIG weld metals	71-77
Liu, Gang / Liang, Yangshi / Chen, Hao / Wang, Hao / Komacka, Jozef / Gu, Xin	Influence of the chemical composition and the morphology of crumb rubbers on the rheological and self-healing properties of bitumen	555-563
He, H. / Sandeep, C. S. / Senetakis, K.	The interface behavior of recycled concrete aggregate: A micromechanical grain-scale experimental study	627-638
Zhang, Zhigang / Yuvaraj, Ananya / Di, Jin / Qian, Shunzhi	Matrix design of light weight, high strength, high ductility ECC	188-197
Khajehnouri, Yasaman / Chouteau, Michel / Rivard, Patrice / Bérubé, Charles L.	Measuring electrical properties of mortar and concrete samples using the spectral induced polarization method: laboratory set-up	1-12
Duarte, Gonçalo / Bravo, Miguel / de Brito, Jorge / Nobre, José	Mechanical performance of shotcrete produced with recycled coarse aggregates from concrete	696-708
Bouaissi, Aissa / Li, Long-yuan / Abdullah, Mohd Mustafa Al Bakri / Bui, Quoc-Bao	Mechanical properties and microstructure analysis of FA-GGBS-HMNS based geopolymer concrete	198-209
Nguyen, Van Chinh / Tong, Fu Guo / Nguyen, Van Nghia	Modeling of autogenous volume deformation process of RCC mixed with MgO based on concrete expansion experiment	650-659
Zhang, Junfei / Ma, Guowei / Huang, Yimiao / Sun, Junbo / Aslani, Farhad / Nener, Brett	Modelling uniaxial compressive strength of lightweight self-compacting concrete using random forest regression	713-719
Jiang, Lei / Wang, Lichen / Wang, Shengyue	A novel solar reflective coating with functional gradient multilayer structure for cooling asphalt pavements	13-21
Ashraf, Warda / Olek, Jan / Sahu, Sada	Phase evolution and strength development during carbonation of low-lime calcium silicate cement (CSC)	473-482
Katzer, Jacek / Szatkiewicz, Tomasz	Properties of concrete elements with 3-D printed formworks which substitute steel reinforcement	157-161
Law, David W. / Nicholls, Peter / Christodoulou, Christian	Residual protection of steel following suspension of Impressed Current Cathodic Protection system on a wharf structure	48-55
Ceravolo, Rosario / Lenticchia, Erica / Miraglia, Gaetano	Spectral entropy of acceleration data for damage detection in masonry buildings affected by seismic sequences	525-539
Gao, Yining / Wang, Fazhou / Liu, Peng / Zhang, Wenqin / Yang, Lu	Superhydrophobic behavior of magnesium oxychloride cement surface with a dual-level fractal structure	132-139
Lin, Xiuju / Liao, Bing / Zhang, Jingfei / Li, Simin / Huang, Jianheng / Pang, Hao	Synthesis and characterization of high-performance cross-linked polycarboxylate superplasticizers	162-171
Czajkowski, Łukasz / Wojcieszak, Dawid / Olek, Wiesław / Przybył, Jacek	Thermal properties of fractions of corn stover	709-712
Parastegari, Niloofar / Mostofinejad, Davood / Poursina, Davood	Use of bacteria to improve electrical resistivity and chloride penetration of air-entrained concrete	588-595

Informations
sur cette fiche
IssueID
28287
Publié(e) le:
24.03.2019
Modifié(e) le:
26.07.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - juin 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - juin 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.