Construction and Building Materials - mars 2019

Publié:	mars 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Li, Yue / Guan, Zhongzheng / Wang, Zigeng / Wang, Peng / Li, Yaqiang / Zhang, Guosheng / Ding, Qingjun	3D meso-scale finite element modelling on cement paste corroded in sodium sulfate with X-ray CT technique	727-737
Koushkbaghi, Mahdi / Kazemi, Mahyar Jafar / Mosavi, Hossein / Mohseni, Ehsan	Acid resistance and durability properties of steel fiber-reinforced concrete incorporating rice husk ash and recycled aggregate	266-275
Jaczewski, Mariusz / Judycki, Józef / Jaskula, Piotr	Asphalt concrete subjected to long-time loading at low temperatures – Deviations from the time-temperature superposition principle	426-439
Okeh, Clifford A. O. / Begg, David W. / Barnett, Stephanie J. / Nanos, Nikos	Behaviour of hybrid steel fibre reinforced self compacting concrete using innovative hooked-end steel fibres under tensile stress	753-761
Xu, Gang / Xiang, Jian / Wang, Qing / Xiang, Xuan / Zhang, Ya-li	Calculation of relative slip between steel bars and concrete	537-545
Peng, Yang / Wu, Chao / Gan, Jieliang / Dong, Jun	Characterization of heterogeneous constitutive relationship of the welded joint based on the stress-hardness relationship using micro-hardness tests	37-45
Kaur, Ramanjit / Kothiyal, N. C.	Comparative effects of sterically stabilized functionalized carbon nanotubes and graphene oxide as reinforcing agent on physico-mechanical properties and electrical resistivity of cement nanocomposites	121-138
Yildirim Ozen, Meral / Moroydor Derun, Emek	A comparative study: Effects of different nanoparticles on the properties of gold mine tailings containing cement mortars	396-405
Giroudon, Marie / Laborel-Préneron, Aurélie / Aubert, Jean-Emmanuel / Magniont, Camille	Comparison of barley and lavender straws as bioaggregates in earth bricks	254-265
Fonseca, Fernando S. / Fortes, Ernesto S. / Parsekian, Guilherme A. / Camacho, Jefferson S.	Compressive strength of high-strength concrete masonry grouted prisms	861-876
Jing, Guoqing / Aela, Peyman / Fu, Hao	The contribution of ballast layer components to the lateral resistance of ladder sleeper track	796-805
Chen, Pang / Zheng, Wenzhong / Wang, Ying / Chang, Wei	Creep model of high-strength concrete containing supplementary cementitious materials	494-506
Yao, Wei / Xia, Kaiwen / Liu, Yanhui / Shi, Yirui / Peterson, Karl	Dependences of dynamic compressive and tensile strengths of four alkali-activated mortars on the loading rate and curing time	891-903
Satpathy, H. P. / Patel, S. K. / Nayak, A. N.	Development of sustainable lightweight concrete using fly ash cenosphere and sintered fly ash aggregate	636-655
Galan, Isabel / Baldermann, Andre / Kusterle, Wolfgang / Dietzel, Martin / Mittermayr, Florian	Durability of shotcrete for underground support– Review and update	465-493
Aboufoul, M. / Shokri, N. / Saleh, E. / Tuck, C. / Garcia, A.	Dynamics of water evaporation from porous asphalt	406-414
Jafari, Armin / Bazli, Milad / Ashrafi, Hamed / Oskouei, Asghar Vatani / Azhari, Samira / Zhao, Xiao-Ling / Gholipour, Hamed	Effect of fibers configuration and thickness on tensile behavior of GFRP laminates subjected to elevated temperatures	189-207
Sanfelix, Susana G. / Santacruz, Isabel / Szczotok, Anna M. / Belloc, Luis Miguel O. / De la Torre, Angeles G. / Kjøniksen, Anna-Lena	Effect of microencapsulated phase change materials on the flow behavior of cement composites	353-362
Zhan, Bao Jian / Xuan, Dong Xing / Poon, Chi Sun	The effect of nanoalumina on early hydration and mechanical properties of cement pastes	169-176
Combrinck, R. / Kayondo, M. / le Roux, B. D. / de Villiers, W. I. / Boshoff, W. P.	Effect of various liquid admixtures on cracking of plastic concrete	139-153
Salahuddin, Hammad / Nawaz, Adnan / Maqsoom, Ahsen / Mehmood, Tahir / Zeeshan, Badar ul Ali	Effects of elevated temperature on performance of recycled coarse aggregate concrete	415-425
He, Yan / Zhang, Xiong / Shui, Liangliang / Wang, Yiting / Gu, Mingdong / Wang, Xiaofu / Wang, Haoren / Peng, Lei	Effects of PCEs with various carboxylic densities and functional groups on the fluidity and hydration performances of cement paste	656-668
Song, Wen / Zou, Dujian / Liu, Tiejun / Teng, Jun / Li, Lei	Effects of recycled CRT glass fine aggregate size and content on mechanical and damping properties of concrete	332-340
Ban Cheah, Chee / Tiong, Ling Ling / Ng, Eng Poh / Oo, Chuan Wei	The engineering performance of concrete containing high volume of ground granulated blast furnace slag and pulverized fly ash with polycarboxylate-based superplasticizer	909-921
Nain, Nidhi / Surabhi, R. / Yathish, N. V. / Krishnamurthy, V. / Deepa, T. / Tharannum, Seema	Enhancement in strength parameters of concrete by application of Bacillus bacteria	904-908
Yılmaz, Emrah / Arslan, Hakan / Bideci, Alper	Environmental performance analysis of insulated composite facade panels using life cycle assessment (LCA)	806-813
Hou, Weiliang / Bao, Jie	Evaluation of cement retarding performance of cellulosic sugar acids	522-527
Ameri, Mahmoud / Mansourkhaki, Ali / Daryaee, Daryoosh	Evaluation of fatigue behavior of asphalt binders containing reclaimed asphalt binder using simplified viscoelastic continuum damage approach	374-386
Liu, Jun / Yan, Kezhen / Liu, Jenny / Guo, Dong	Evaluation of the characteristics of Trinidad Lake Asphalt and Styrene–Butadiene–Rubber compound modified binder	614-621
He, Qun / Chen, Yiyi / Ke, Ke / Yam, Michael C. H. / Wang, Wei	Experiment and constitutive modeling on cyclic plasticity behavior of LYP100 under large strain range	507-521
Xu, Chao / Cao, Ping zhou / Wu, Kai / Lin, Shi-qi / Yang, Ding guo	Experimental investigation of the behavior composite steel-concrete composite beams containing different amounts of steel fibres and conventional reinforcement	23-36
Wu, Xun / Chen, Lei / Li, Hui / Xu, Jun	Experimental study of the mechanical properties of reinforced concrete compression members under the combined action of sustained load and corrosion	11-22
Lu, Guoyang / Renken, Lukas / Li, Tianshuai / Wang, Dawei / Li, Hui / Oeser, Markus	Experimental study on the polyurethane-bound pervious mixtures in the application of permeable pavements	838-850
Chen, Jun / Zhou, Zheng / Wu, Jiantao / Hou, Shuguang / Liu, Mengcheng	Field and laboratory measurement of albedo and heat transfer for pavement materials	46-57
Mahedi, Masrur / Cetin, Bora / Cetin, Kristen S.	Freeze-thaw performance of phase change material (PCM) incorporated pavement subgrade soil	449-464
Huang, Zujian / Sun, Yimin / Musso, Florian	Hygrothermal performance optimization on bamboo building envelope in Hot-Humid climate region	223-245
Saleh, Samaila / Yunus, Nor Zurairahetty Mohd / Ahmad, Kamarudin / Ali, Nazri	Improving the strength of weak soil using polyurethane grouts: A review	738-752
Zheng, Zhao / Ma, Xue / Zhang, Zuhua / Li, Yuxiang	In-situ transition of amorphous gels to Na-P1 zeolite in geopolymer: Mechanical and adsorption properties	851-860
Cao, Fengze / Yan, Peiyu	The influence of the hydration procedure of MgO expansive agent on the expansive behavior of shrinkage-compensating mortar	162-168
Long, Wu-Jian / Ye, Tao-Hua / Gu, Yu-Cun / Li, Hao-Dao / Xing, Feng	Inhibited effect of graphene oxide on calcium leaching of cement pastes	177-188
Wang, Yongdan / Liu, Ziming / Hao, Peiwen	Investigation on mechanical and microwave heating characteristics of asphalt mastic using activated carbon powder as electro-magnetic absorbing materials	692-703
Wang, Hanbing / Li, Hui / Liang, Xiao / Zhou, Haonan / Xie, Ning / Dai, Zhen	Investigation on the mechanical properties and environmental impacts of pervious concrete containing fly ash based on the cement-aggregate ratio	387-395
Kim, Ji-Su / Chung, Sang-Yeop / Stephan, Dietmar / Han, Tong-Seok	Issues on characterization of cement paste microstructures from μ-CT and virtual experiment framework for evaluating mechanical properties	82-102
Abdalhmid, Jamila M. / Ashour, A. F. / Sheehan, T.	Long-term drying shrinkage of self-compacting concrete: Experimental and analytical investigations	825-837
Murgo, F. S. / Mazzotti, C.	Masonry columns strengthened with FRCM system: Numerical and experimental evaluation	208-222
Ma, Guowei / Li, Zhijian / Wang, Li / Wang, Fang / Sanjayan, Jay	Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing	770-783
Sun, Xinjian / Gao, Zhen / Cao, Peng / Zhou, Changjun	Mechanical properties tests and multiscale numerical simulations for basalt fiber reinforced concrete	58-72
Naghizadeh, A. / Ekolu, S. O.	Method for comprehensive mix design of fly ash geopolymer mortars	704-717
Oruji, Soheil / Brake, Nicholas A. / Guduru, Ramesh K. / Nalluri, Likhith / Günaydın-Şen, Özge / Kharel, Krishna / Rabbanifar, Saeed / Hosseini, Seyedsaeid / Ingram, Emily	Mitigation of ASR expansion in concrete using ultra-fine coal bottom ash	814-824
Yang, Jun / Jia, Yuting / Hou, Dongshuai / Wang, Pan / Jin, Zuquan / Shang, Huaishuai / Li, Shaochun / Zhao, Tiejun	Na and Cl immobilization by size controlled calcium silicate hydrate nanometer pores	622-635
Wan, Yipin / Jia, Jie	Nonlinear dynamics of asphalt–screed interaction during compaction: Application to improving paving density	363-373
Hasan, Hasan / Huang, Bo / Saafi, Mohamed / Sun, Jiawei / Chi, Yin / Whale, Eric / Hepworth, David / Ye, Jianqiao	Novel engineered high performance sugar beetroot 2D nanoplatelet-cementitious composites	546-562
Feng, Jun / Gao, Xudong / Li, Jizheng / Dong, Haolin / He, Qiang / Liang, Jianguo / Sun, WeiWei	Penetration resistance of hybrid-fiber-reinforced high-strength concrete under projectile multi-impact	341-352
Liu, G. / Florea, M. V. A. / Brouwers, H. J. H.	Performance evaluation of sustainable high strength mortars incorporating high volume waste glass as binder	574-588
Dai, Nianwei / Wu, Jun / Zhang, Lai-Chang / Yin, Liqiang / Yang, Yuanyuan / Jiang, Yiming / Li, Jin	Pitting and etching behaviors occurring in duplex stainless steel 2205 in the presence of alternating voltage interference	877-890
MolaAbasi, Hossein / Saberian, Mohammad / Li, Jie	Prediction of compressive and tensile strengths of zeolite-cemented sand using porosity and composition	784-795
Du, Wei / Yu, Jianying / Gu, Yi / Li, Ying / Han, Xiaobin / Liu, Quantao	Preparation and application of microcapsules containing toluene-di-isocyanate for self-healing of concrete	762-769
Ren, Changzai / Wang, Wenlong / Wu, Shuang / Yao, Yonggang	Preparation of sulphoaluminate-magnesium potassium phosphate cementitious composite material under low-temperature	246-253
Lyu, Kai / She, Wei / Miao, Changwen / Chang, Honglei / Gu, Yue	Quantitative characterization of pore morphology in hardened cement paste via SEM-BSE image analysis	589-602
Eskandarsefat, Shahin / Dondi, Giulio / Sangiorgi, Cesare	Recycled and rubberized SMA modified mixtures: A comparison between polymer modified bitumen and modified fibres	681-691
Peng, Cao / Guodong, Li / Jiangjiang, Yu / Ming, Zhang / Feng, Jin / Zhimeng, Zhao	Research and application of random aggregate model in determining the fracture behavior of four-point bending beam with notch	276-289
Shiyu, Zhuang / Qiang, Wang / Yuqi, Zhou	Research on the resistance to saline soil erosion of high-volume mineral admixture steam-cured concrete	1-10
Shi, Tao / Li, Zexin / Guo, Jian / Gong, Hao / Gu, Chunping	Research progress on CNTs/CNFs-modified cement-based composites – A review	290-307
Zuo, Zhongcun / Bennett, Terry	Simulation of the degradation of oilwell cement for the prediction of long-term performance	669-680
Rożek, Piotr / Król, Magdalena / Mozgawa, Włodzimierz	Solidification/stabilization of municipal solid waste incineration bottom ash via autoclave treatment: Structural and mechanical properties	603-613
Nagaratnam, Brabha Hari / Mannan, Muhammad Abdul / Rahman, Muhammad Ekhlasur / Mirasa, Abdul Karim / Richardson, Alan / Nabinejad, Omid	Strength and microstructural characteristics of palm oil fuel ash and fly ash as binary and ternary blends in Self-Compacting concrete	103-120
Subramanian, Sathya / Khan, Qasim / Ku, Taeseo	Strength development and prediction of calcium sulfoaluminate treated sand with optimized gypsum for replacing OPC in ground improvement	308-318
Khaloian Sarnaghi, A. / Van de Kuilen, J. W. G.	Strength prediction of timber boards using 3D FE-analysis	563-573
Freire, Maria Teresa / Veiga, Maria do Rosário / Silva, António Santos / de Brito, Jorge	Studies in ancient gypsum based plasters towards their repair: Physical and mechanical properties	319-331
Li, Zhixin / Xu, Kaidong / Peng, Jiahui / Wang, Jina / Ma, Xianwei / Niu, Jishou	Study on hydration and mechanical property of quicklime blended recycled plaster materials	440-448
Iucolano, Fabio / Colella, Abner / Liguori, Barbara / Calcaterra, Domenico	Suitability of silica nanoparticles for tuff consolidation	73-81
Yang, Zhiyun / Yu, Meng / Liu, Yongmei / Chen, Xiaoling / Zhao, Yansheng	Synthesis and performance of an environmentally friendly polycarboxylate superplasticizer based on modified poly(aspartic acid)	154-161
Zhu, Heng / Xu, Shi-ai	Synthesis and properties of rigid polyurethane foams synthesized from modified urea-formaldehyde resin	718-726
Huang, Kaijian / Shi, Xijun / Zollinger, Dan / Mirsayar, MirMilad / Wang, Aiguo / Mo, Liwu	Use of MgO expansion agent to compensate concrete shrinkage in jointed reinforced concrete pavement under high-altitude environmental conditions	528-536

Informations
sur cette fiche
IssueID
26928
Publié(e) le:
11.01.2019
Modifié(e) le:
26.07.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mars 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mars 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.