Construction and Building Materials - octobre 2017

Publié:	octobre 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Garijo, Lucía / Zhang, Xiaoxin / Ruiz, Gonzalo / Ortega, José J. / Yu, Rena C.	Advanced mechanical characterization of NHL mortars and cohesive simulation of their failure behavior	569-577
Al-Saadi, Nihad Tareq Khshain / Mohammed, Alyaa / Al-Mahaidi, Riadh	Assessment of residual strength of concrete girders rehabilitated using NSM CFRP with cementitious adhesive made with graphene oxide after exposure to fatigue loading	402-422
Yuan, B. / Yu, Q. L. / Dainese, E. / Brouwers, H. J. H.	Autogenous and drying shrinkage of sodium carbonate activated slag altered by limestone powder incorporation	459-468
López-Carreño, Rubén-Daniel / Pujadas, Pablo / Cavalaro, Sergio H. P. / Aguado, Antonio	Bond strength of whitetoppings and bonded overlays constructed with self-compacting high-performance concrete	835-845
Yin, Fan / Martin, Amy Epps / Arámbula-Mercado, Edith / Newcomb, David	Characterization of non-uniform field aging in asphalt pavements	607-615
Bediako, Mark / Kevern, John Tristan / Dodoo-Arhin, David	Co-fired Ghanaian clay-palm kernel shells pozzolan: Thermogravimetric, 29Si and 27Al MA NMR characteristics	430-435
Rashidian-Dezfouli, Hassan / Rangaraju, Prasada Rao	A comparative study on the durability of geopolymers produced with ground glass fiber, fly ash, and glass-powder in sodium sulfate solution	996-1009
Geng, Junjun / Zhou, Min / Li, Yixin / Chen, Yuchi / Han, Yi / Wan, Sha / Zhou, Xian / Hou, Haobo	Comparison of red mud and coal gangue blended geopolymers synthesized through thermal activation and mechanical grinding preactivation	185-192
Lee, Seong-Hyeok / Vo, Hai Viet / Park, Dae-Wook / Na, Il-Ho	Comparisons of structural behavior between level and cant area of asphalt concrete track	578-587
Cai, Jun / Pei, Jianzhong / Luo, Qinghui / Zhang, Jiupeng / Li, Rui / Chen, Xiangfeng	Comprehensive service properties evaluation of composite grouting materials with high-performance cement paste for semi-flexible pavement	544-556
Chen, Ying-Liang / Chang, Juu-En / Lai, Yi-Chieh / Chou, Mei-In Melissa	A comprehensive study on the production of autoclaved aerated concrete: Effects of silica-lime-cement composition and autoclaving conditions	622-629
Suvorova, Olga / Kumarova, Victoria / Nekipelov, Dmitriy / Selivanova, Ekaterina / Makarov, Dmitriy / Masloboev, Vladimir	Construction ceramics from ore dressing waste in Murmansk region, Russia	783-789
Abdalkader, Ashraf / Lynsdale, Cyril / Cripps, John	Corrosion behaviour of steel rebar in mortars subjected to magnesium sulfate and sodium chloride mixtures at 5 and 20 °C	358-363
Deng, Mingke / Zhang, Yangxi	Cyclic loading tests of RC columns strengthened with high ductile fiber reinforced concrete jacket	986-995
Wang, Chao / Zhao, Lidong / Cao, Wei / Cao, Dongwei / Tian, Bo	Development of paving performance index system for selection of modified asphalt binder	695-703
Younis, Adel / Ebead, Usama / Shrestha, Kshitij C.	Different FRCM systems for shear-strengthening of reinforced concrete beams	514-526
Si, Ruizhe / Guo, Shuaicheng / Dai, Qingli	Durability performance of rubberized mortar and concrete with NaOH-Solution treated rubber particles	496-505
Hu, Xiang / Shi, Caijun / Shi, Zhenguo / Tong, Baihui / Wang, Dehui	Early age shrinkage and heat of hydration of cement-fly ash-slag ternary blends	857-865
Wu, Shenghua / Al-Qadi, Imad L. / Lippert, David L. / Ozer, Hasan / Espinoza Luque, Arturo F. / Safi, Fazal R.	Early-age performance characterization of hot-mix asphalt overlay with varying amounts of asphalt binder replacement	294-306
Rashad, Alaa M.	Effect of carbon nanotubes (CNTs) on the properties of traditional cementitious materials	81-101
Wang, Lei / Yi, Ju / Zhang, Jianren / Jiang, Youbao / Zhang, Xuhui	Effect of corrosion-induced crack on the bond between strand and concrete	598-606
Fan, Lidan / Zhang, Zijian / Yu, Yongqiang / Li, Peitao / Cosgrove, Tom	Effect of elevated curing temperature on ceramsite concrete performance	423-429
Gao, Xiang / Wei, Ya / Huang, Wei	Effect of individual phases on multiscale modeling mechanical properties of hardened cement paste	25-35
Li, P. P. / Yu, Q. L. / Brouwers, H. J. H.	Effect of PCE-type superplasticizer on early-age behaviour of ultra-high performance concrete (UHPC)	740-750
Wu, Qisheng / Zhu, Zheyu / Li, Shuiping / Wang, Shunxiang / Chen, Baorui	Effect of polyacrylic ester emulsion on mechanical properties of macro-defect free desulphurization gypsum plaster	656-662
Madrid, Maggi / Orbe, Aimar / Rojí, Eduardo / Cuadrado, Jesús	The effects of by-products incorporated in low-strength concrete for concrete masonry units	117-128
Bourguiba, Amel / Ghorbel, Elhem / Cristofol, Lilian / Dhaoui, Wadia	Effects of recycled sand on the properties and durability of polymer and cement based mortars	44-54
Oderji, Sajjad Yousefi / Chen, Bing / Jaffar, Syed Taseer Abbas	Effects of relative humidity on the properties of fly ash-based geopolymers	268-273
Alsalman, Ali / Dang, Canh N. / Prinz, Gary S. / Hale, W. Micah	Evaluation of modulus of elasticity of ultra-high performance concrete	918-928
Chaturabong, Preeda / Bahia, Hussain U.	The evaluation of relative effect of moisture in Hamburg wheel tracking test	337-345
Chen, Junling / Li, Jinwei / Li, Zhexu	Experiment research on rate-dependent constitutive model of Q420 steel	816-823
Shen, Lei / Ren, Qingwen / Zhang, Linfei / Han, Yan / Cusatis, Gianluca	Experimental and numerical study of effective thermal conductivity of cracked concrete	55-68
Arêde, António / Costa, Cristina / Topa Gomes, António / Menezes, José Eduardo / Silva, Ruben / Morais, Maria / Gonçalves, Rui	Experimental characterization of the mechanical behaviour of components and materials of stone masonry railway bridges	663-681
Wang, Xiaogang / Song, Xiaowei / Zhang, Moping / Du, Xiangbo	Experimental comparison of corrosion unevenness and expansive cracking between accelerated corrosion methods used in laboratory research	36-43
Davar, Arash / Tanzadeh, Javad / Fadaee, Omid	Experimental evaluation of the basalt fibers and diatomite powder compound on enhanced fatigue life and tensile strength of hot mix asphalt at low temperatures	238-246
Sadeghi, Javad / Liravi, Hassan / Esmaeili, M. Hassan	Experimental investigation on loading pattern of railway concrete slabs	481-495
Liu, Baoju / Yang, Tengyu / Xie, Youjun	Factors influencing bugholes on concrete surface analyzed by image processing technology	897-907
Kwan, A. K. H. / Ling, S. K.	Filler technology for improving robustness and reducing cementitious paste volume of SCC	875-885
Chandrappa, Anush K. / Biligiri, Krishna Prapoorna	Flexural-fatigue characteristics of pervious concrete: Statistical distributions and model development	1-15
Song, Zijian / Jiang, Linhua / Chu, Hongqiang	Impact of calcium leaching on chloride diffusion behavior of cement pastes exposed to ammonium chloride aqueous solution	211-215
López-Querol, Susana / Arias-Trujillo, Juana / GM-Elipe, Maria / Matias-Sanchez, Agustin / Cantero, Blas	Improvement of the bearing capacity of confined and unconfined cement-stabilized aeolian sand	374-384
Lu, Jian-xin / Zhan, Bao-Jian / Duan, Zhen-hua / Poon, Chi Sun	Improving the performance of architectural mortar containing 100% recycled glass aggregates by using SCMs	975-985
Zhou, Yang / Ma, Baoguo / Huang, Jian / Li, Xiangguo / Tan, Hongbo / Lv, Zhenghang	Influence of Ca/Si ratio of concrete pore solution on thaumasite formation	261-267
Keskin, Riza Secer Orkun / Arslan, Guray / Sengun, Kadir	Influence of CFRP on the shear strength of RC and SFRC beams	16-24
He, Minjuan / Zhang, Jing / Li, Zheng	Influence of cracks on the mechanical performance of dowel type glulam bolted joints	445-458
Yang, Tao / Zhu, Huajun / Zhang, Zuhua	Influence of fly ash on the pore structure and shrinkage characteristics of metakaolin-based geopolymer pastes and mortars	284-293
Dong, Fuqiang / Yu, Xin / Liang, Xingmin / Ding, Gongying / Wei, Jianming	Influence of foaming water and aging process on the properties of foamed asphalt	866-874
Gu, Jun / Huang, Ju / Hao, Haiyang	Influence of mud cake solidification agents on thickening time of oil well cement and its solution	327-336
Rueda, Eduardo J. / Caro, Silvia / Caicedo, Bernardo	Influence of relative humidity and saturation degree in the mechanical properties of Hot Mix Asphalt (HMA) materials	807-815
Sandhu, Ravinder Kaur / Siddique, Rafat	Influence of rice husk ash (RHA) on the properties of self-compacting concrete: A review	751-764
Le Hoang, An / Fehling, Ekkehard	Influence of steel fiber content and aspect ratio on the uniaxial tensile and compressive behavior of ultra high performance concrete	790-806
Zhang, Qian / Xu, Yi-heng / Wen, Zhi-guang	Influence of water-borne epoxy resin content on performance of waterborne epoxy resin compound SBR modified emulsified asphalt for tack coat	774-782
Wu, Kai / Chen, Feng / Xu, Chao / Lin, Shi-qi / Nan, Yang	Internal curing effect on strength of recycled concrete and its enhancement in concrete-filled thin-wall steel tube	824-834
da Silva, Sérgio Roberto / de Oliveira Andrade, Jairo José	Investigation of mechanical properties and carbonation of concretes with construction and demolition waste and fly ash	704-715
Li, Shucai / Sha, Fei / Liu, Rentai / Zhang, Qingsong / Li, Zhaofeng	Investigation on fundamental properties of microfine cement and cement-slag grouts	965-974
Otten, Kathrin A. / Brischke, Christian / Meyer, Christopher	Material moisture content of wood and cement mortars – Electrical resistance-based measurements in the high ohmic range	640-646
Chu, Hong-yan / Jiang, Jin-yang / Sun, Wei / Zhang, Mingzhong	Mechanical and thermal properties of graphene sulfonate nanosheet reinforced sacrificial concrete at elevated temperatures	682-694
Choi, Hyeonggil / Zhang, Wenyan / Hama, Yukio	Method for determining early-age frost damage of concrete by using air-permeability index and influence of early-age frost damage on concrete durability	630-639
Rezazadeh, Mohammadali / Carvelli, Valter / Veljkovic, Ana	Modelling bond of GFRP rebar and concrete	102-116
Brooks, Adam L. / Zhou, Hongyu / Shen, Zhenglai	A monolithic "unibody" construction of structural assemblies through vacuum-assisted processing of agro-waste fibrous composites	886-896
Ali, Yasir / Irfan, Muhammad / Ahmed, Sarfraz / Ahmed, Shafeeq	Permanent deformation prediction of asphalt concrete mixtures – A synthesis to explore a rational approach	588-597
Mohajerani, Abbas / Tanriverdi, Yasin / Nguyen, Bao Thach / Wong, Kee Kong / Dissanayake, Harin Nishamal / Johnson, Lachlan / Whitfield, Damian / Thomson, Guy / Alqattan, Eilaf / Rezaei, Ahmad	Physico-mechanical properties of asphalt concrete incorporated with encapsulated cigarette butts	69-80
Salesa, Ángel / Pérez-Benedicto, Jose Ángel / Esteban, Luis Mariano / Vicente-Vas, Rosa / Orna-Carmona, Martín	Physico-mechanical properties of multi-recycled self-compacting concrete prepared with precast concrete rejects	364-373
D'Aveni, Antonino / D'Agata, Giuseppe	Post-tensioned timber structures: New perspectives	216-224
Nie, Shuai / Hu, Shuguang / Wang, Fazhou / Hu, Chuanlin / Li, Xinping / Zhu, Yaohong	Pozzolanic reaction of lightweight fine aggregate and its influence on the hydration of cement	165-173
Allahverdi, Ali / Vafaei, Mostafa / Maghsoodloorad, Hojjatollah	Quality control and assessment of geopolymer cements based on reacted and free alkalis	274-283
Mohd Hasan, Mohd Rosli / You, Zhanping / Yang, Xu / Heiden, Particia A.	Quantification of physicochemical properties, activation energy, and temperature susceptibility of foamed asphalt binders	557-568
Li, Yue / Lin, Hui / Wang, Zigeng	Quantitative analysis of fly ash in hardened cement paste	139-145
Ye, Huan / Gao, Xiaojian / Wang, Rui / Wang, Hui	Relationship among particle characteristic, water film thickness and flowability of fresh paste containing different mineral admixtures	193-201
Li, Yue / Liu, Xiongfei / Wu, Miaoke / Bai, Weiliang	Research of electrochemical chloride extraction and reinforcement of concrete column using MPC-bonded carbon fiber reinforced plastic sheet & mesh	436-444
Youssf, Osama / Hassanli, Reza / Mills, Julie E.	Retrofitting square columns using FRP-confined crumb rubber concrete to improve confinement efficiency	146-156
Korayem, A. H. / Tourani, N. / Zakertabrizi, M. / Sabziparvar, A. M. / Duan, W. H.	A review of dispersion of nanoparticles in cementitious matrices: Nanoparticle geometry perspective	346-357
Thomas, R. J. / Sorensen, Andrew D.	Review of strain rate effects for UHPC in tension	846-856
Amenta, Maria / Karatasios, Ioannis / Maravelaki- Kalaitzaki, Pagona / Kilikoglou, Vassilis	The role of aggregate characteristics on the performance optimization of high hydraulicity restoration mortars	527-534
Xia, Tian / Zhou, Longmei / Lan, Shiwei / Huang, Xu	SBS modified bitumen in the presence of hydrophilic or hydrophobic silica nanoparticles	957-964
Khodair, Yasser / Bommareddy, Bhagiratha	Self-consolidating concrete using recycled concrete aggregate and high volume of fly ash, and slag	307-316
Liu, Hezhi / Zhang, Qian / Gu, Chongshi / Su, Huaizhi / Li, Victor	Self-healing of microcracks in Engineered Cementitious Composites under sulfate and chloride environment	948-956
Zhou, Qiang / Zhu, Fei / Yang, Xu / Wang, Fenglai / Chi, Bin / Zhang, Zhiming	Shear capacity estimation of fully grouted reinforced concrete masonry walls using neural network and adaptive neuro-fuzzy inference system models	937-947
Javilla, Barugahare / Mo, Liantong / Hao, Fang / Shu, Benan / Wu, Shaopeng	Significance of initial rutting in prediction of rutting development and characterization of asphalt mixtures	157-164
Aydin, Ertug	Staple wire-reinforced high-volume fly-ash cement paste composites	393-401
Oruji, Soheil / Brake, Nicholas A. / Nalluri, Likhith / Guduru, Ramesh K.	Strength activity and microstructure of blended ultra-fine coal bottom ash-cement mortar	317-326
Piasta, Wojciech / Góra, Jacek / Budzyński, Waldemar	Stress-strain relationships and modulus of elasticity of rocks and of ordinary and high performance concretes	728-739
Kumar, R. / Singh, S. / Singh, L. P.	Studies on enhanced thermally stable high strength concrete incorporating silica nanoparticles	506-513
Chhorn, Chamroeun / Hong, Seong Jae / Lee, Seung-Woo	A study on performance of roller-compacted concrete for pavement	535-543
Lei, Dong-Yi / Guo, Li-Ping / Sun, Wei / Liu, Jia-ping / Miao, Chang-wen	Study on properties of untreated FGD gypsum-based high-strength building materials	765-773
Setayesh Gar, Parisa / Suresh, Narayana / Bindiganavile, Vivek	Sugar cane bagasse ash as a pozzolanic admixture in concrete for resistance to sustained elevated temperatures	929-936
Bravo, M. / de Brito, J. / Evangelista, L. / Pacheco, J.	Superplasticizer's efficiency on the mechanical properties of recycled aggregates concrete: Influence of recycled aggregates composition and incorporation ratio	129-138
Mazarei, Vandad / Trejo, David / Ideker, Jason H. / Isgor, O. Burkan	Synergistic effects of ASR and fly ash on the corrosion characteristics of RC systems	647-655
Javilla, Barugahare / Mo, Liantong / Hao, Fang / An, Shuben / Wu, Shaopeng	Systematic comparison of two-stage analytical rutting models of asphalt mixtures	716-727
Richardson, Alan / Ovington, Rhys	Temperature related steel and synthetic fibre concrete performance	616-621
Kashani, Alireza / Ngo, Tuan D. / Walkley, Brant / Mendis, Priyan	Thermal performance of calcium-rich alkali-activated materials: A microstructural and mechanical study	225-237
Biswal, S. / Ramaswamy, A.	Uncertainty based model averaging for prediction of long-time prestress losses in concrete structures	469-480
Karinski, Y. S. / Yankelevsky, D. Z. / Zhutovsky, S. / Feldgun, V. R.	Uniaxial confined compression tests of cementitious materials	247-260
Wang, Yan-Shuai / Dai, Jian-Guo	Use of magnesia sand for optimal design of high performance magnesium potassium phosphate cement mortar	385-392
Liu, Jiayin / Sun, Yiren / Wang, Weiying / Chen, Jingyun	Using the viscoelastic parameters to estimate the glass transition temperature of asphalt binders	908-917
Illampas, Rogiros / Silva, Rui A. / Charmpis, Dimos C. / Lourenço, Paulo B. / Ioannou, Ioannis	Validation of the repair effectiveness of clay-based grout injections by lateral load testing of an adobe model building	174-184
Tsakiridis, P. E. / Samouhos, M. / Perraki, M.	Valorization of Dried Olive Pomace as an alternative fuel resource in cement clinkerization	202-210

Informations
sur cette fiche
IssueID
22637
Publié(e) le:
14.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - octobre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - octobre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.