Construction and Building Materials - septembre 2017

Publié:	septembre 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Qian, Shan / Cheng, Y. Frank	Accelerated corrosion of pipeline steel and reduced cathodic protection effectiveness under direct current interference	675-685
Lourenço, Tomás / Matias, Luís / Faria, Paulina	Anomalies detection in adhesive wall tiling systems by infrared thermography	419-428
Liu, Guoqiang / Zhao, Yongli / Zhou, Jian / Li, Jing / Yang, Tao / Zhang, Jiupeng	Applicability of evaluation indices for asphalt and filler interaction ability	599-609
Kalhori, Hamid / Bagherpour, Raheb	Application of carbonate precipitating bacteria for improving properties and repairing cracks of shotcrete	249-260
Dehghan, Alireza / Peterson, Karl / Riehm, Graham / Herzog Bromerchenkel, Lucas	Application of X-ray microfluorescence for the determination of chloride diffusion coefficients in concrete chloride penetration experiments	85-95
Liu, Yiquan / Leong, Bo Siang / Hu, Zhong-Ting / Yang, En-Hua	Autoclaved aerated concrete incorporating waste aluminum dust as foaming agent	140-147
Li, Wen-Tao / Long, Yue-Ling / Huang, Jun / Lin, Yan	Axial load behavior of structural bamboo filled with concrete and cement mortar	273-287
Kambole, C. / Paige-Green, P. / Kupolati, W. K. / Ndambuki, J. M. / Adeboje, A. O.	Basic oxygen furnace slag for road pavements: A review of material characteristics and performance for effective utilisation in southern Africa	618-631
Lee, Heeyoung / Lee, Woosung / Jung, Woo Tai / Chung, Wonseok	Bond characteristics of near-surface-mounted anchorage for prestressing	748-756
Xu, Shanhua / Li, Anbang / Wang, Hao	Bond properties for deformed steel bar in frost-damaged concrete under monotonic and reversed cyclic loading	344-358
Zhao, Hui / Poon, Chi Sun	A comparative study on the properties of the mortar with the cathode ray tube funnel glass sand at different treatment methods	900-909
Onifade, Ibrahim / Birgisson, Björn	Damage and fracture characterization of asphalt concrete mixtures using the equivalent micro-crack stress approach	521-530
Imperatore, Stefania / Rinaldi, Zila / Drago, Carlo	Degradation relationships for the mechanical properties of corroded steel rebars	219-230
Ramil, A. / Pozo-Antonio, J. S. / Fiorucci, M. P. / López, A. J. / Rivas, T.	Detection of the optimal laser fluence ranges to clean graffiti on silicates	122-130
Sherir, Mohamed A. A. / Hossain, Khandaker M. A. / Lachemi, Mohamed	Development and recovery of mechanical properties of self-healing cementitious composites with MgO expansive agent	789-810
Tufekci, M. Mansur / Gokce, Ahmet	Development of heavyweight high performance fiber reinforced cementitious composites (HPFRCC) – Part I: Mechanical properties	559-570
Kim, Min Ook / Bordelon, Amanda C. / Lee, Nam Kon	Early-age crack widths of thin fiber reinforced concrete overlays subjected to temperature gradients	492-503
Singh, Surender / Ransinchung, G. D. / Kumar, Praveen	An economical processing technique to improve RAP inclusive concrete properties	734-747
Chong, Linlin / Shi, Caijun / Yang, Jianming / Jia, Huangfei	Effect of limestone powder on the water stability of magnesium phosphate cement-based materials	590-598
Merah, Ahmed / Krobba, Benharzallah	Effect of the carbonatation and the type of cement (CEM I, CEM II) on the ductility and the compressive strength of concrete	874-886
Cai, Yamei / Hou, Pengkun / Cheng, Xin / Du, Peng / Ye, Zhengmao	The effects of nanoSiO 2 on the properties of fresh and hardened cement-based materials through its dispersion with silica fume	770-780
Lei, Zhang / Bahia, Hussain / Yi-qiu, Tan / Ling, Cheng	Effects of refined waste and bio-based oil modifiers on rheological properties of asphalt binders	504-511
Ambedkar, B. / Alex, Josephin / Dhanalakshmi, J.	Enhancement of mechanical properties and durability of the cement concrete by RHA as cement replacement: Experiments and modeling	167-175
Huang, Zhenyu / Liew, J. Y. Richard / Li, Wei	Evaluation of compressive behavior of ultra-lightweight cement composite after elevated temperature exposure	579-589
Honório de Assis, Sérgio Ricardo / Oliveira de Queiroz, Bismak / Cavalcante Araújo, Carla / Nunes, Kildenberg Kaynan Felix / Almeida de Melo, Ricardo / Lucena, Leda Christiane de F. Lopes	Evaluation of limestone crushed dust aggregates in hot mix asphalt	659-665
Oliveira, Mateus A. / Azenha, Miguel / Lourenço, Paulo B. / Meneghini, Anna / Guimarães, Erika T. / Castro, Fernando / Soares, Delfim	Experimental analysis of the carbonation and humidity diffusion processes in aerial lime mortar	38-48
Rimkus, Arvydas / Gribniak, Viktor	Experimental investigation of cracking and deformations of concrete ties reinforced with multiple bars	49-61
Bazli, Milad / Ashrafi, Hamed / Oskouei, Asghar Vatani	Experiments and probabilistic models of bond strength between GFRP bar and different types of concrete under aggressive environments	429-443
Al-Saadi, Nihad Tareq Khshain / Mohammed, Alyaa / Al-Mahaidi, Riadh	Fatigue performance of near-surface mounted CFRP strips embedded in concrete girders using cementitious adhesive made with graphene oxide	632-647
Liu, Z. Y. / Li, Q. / Cui, Z. Y. / Wu, W. / Li, Z. / Du, C. W. / Li, X. G.	Field experiment of stress corrosion cracking behavior of high strength pipeline steels in typical soil environments	131-139
Shan, Yao / Shu, Yao / Zhou, Shunhua	Finite-infinite element coupled analysis on the influence of material parameters on the dynamic properties of transition zones	548-558
Wang, Jia-Ji / Tao, Mu-Xuan / Nie, Xin	Fracture energy-based model for average crack spacing of reinforced concrete considering size effect and concrete strength variation	398-410
Neumann, J. / Simon, J.-W. / Mollenhauer, K. / Reese, S.	A framework for 3D synthetic mesoscale models of hot mix asphalt for the finite element method	857-873
Rusin, Zbigniew / Świercz, Przemysław	Frost resistance of rock materials	704-714
Tai, Yuh-Shiou / El-Tawil, Sherif	High loading-rate pullout behavior of inclined deformed steel fibers embedded in ultra-high performance concrete	204-218
Zhang, Jiaguang / Liu, Yuanzhen / Feng, Tao / Zhou, Mengjun / Zhao, Lin / Zhou, Aijuan / Li, Zhu	Immobilizing bacteria in expanded perlite for the crack self-healing in concrete	610-617
Bui, Ngoc Kien / Satomi, Tomoaki / Takahashi, Hiroshi	Improvement of mechanical properties of recycled aggregate concrete basing on a new combination method between recycled aggregate and natural aggregate	376-385
Deng, Xiaoyong / Li, Zhigang / Huang, Yaxin / Luan, Yibo	Improving mechanism and effect analysis of sulfurated and grafted Eucommia Ulmoides Gum modified rubber asphalt	715-722
Rath, Sovannsathya / Ouchi, Masahiro / Puthipad, Nipat / Attachaiyawuth, Anuwat	Improving the stability of entrained air in self-compacting concrete by optimizing the mix viscosity and air entraining agent dosage	531-537
Masmoudi, Rehab / Kupwade-Patil, Kunal / Bumajdad, Ali / Büyüköztürk, Oral	In situ Raman studies on cement paste prepared with natural pozzolanic volcanic ash and Ordinary Portland Cement	444-454
Sumesh, Mathialagan / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Mo, Kim Hung / Alnahhal, Mohammed Fouad	Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review	62-84
Yousefieh, Negin / Joshaghani, Alireza / Hajibandeh, Erfan / Shekarchi, Mohammad	Influence of fibers on drying shrinkage in restrained concrete	833-845
Garcez de Azevedo, Afonso Rangel / Alexandre, Jonas / Zanelato, Euzébio Bernabé / Teixeira Marvila, Markssuel	Influence of incorporation of glass waste on the rheological properties of adhesive mortar	359-368
Zhang, Peng / Wan, Jinyi / Wang, Kejin / Li, Qingfu	Influence of nano-SiO 2 on properties of fresh and hardened high performance concrete: A state-of-the-art review	648-658
Waldmann, Danièle / May, Andreas / Thapa, Vishojit Bahadur	Influence of the sheet profile design on the composite action of slabs made of lightweight woodchip concrete	887-899
Zhu, Wenjun / François, Raoul / Poon, Chi Sun / Dai, Jian-Guo	Influences of corrosion degree and corrosion morphology on the ductility of steel reinforcement	297-306
Choi, Seongcheol	Internal relative humidity and drying shrinkage of hardening concrete containing lightweight and normal-weight coarse aggregates: A comparative experimental study and modeling	288-296
Cao, Xuejuan / Yang, Xiaoyu / Li, Hui / Huang, Wei / Liu, Xiaofeng	Investigation of Ce-TiO 2 photocatalyst and its application in asphalt- based specimens for NO degradation	824-832
Cao, Peng / Jin, Feng / Changjun, Zhou / Feng, Decheng	Investigation on statistical characteristics of asphalt concrete dynamic moduli with random aggregate distribution model	723-733
Wang, Wei / Lu, Caifeng / Li, Yunxia / Li, Qingtao	An investigation on thermal conductivity of fly ash concrete after elevated temperature exposure	148-154
Goel, Gaurav / Kalamdhad, Ajay S.	An investigation on use of paper mill sludge in brick manufacturing	334-343
Li, Feng / Zhou, Siqi / Cai, Wenyuan / Du, Yuchuan / Li, Li	Laboratory evaluation of short and long term performance of hot-poured sealants	30-37
Ramalingam, S. / Murugasan, R. / Nagabhushana, M. N.	Laboratory performance evaluation of environmentally sustainable sisal fibre reinforced bituminous mixes	22-29
Gao, Xinwen / Fan, Zepeng / Zhang, Jiupeng / Liu, Shaowen	Micromechanical model for asphalt mixture coupling inter-particle effect and imperfect interface	696-703
Kalman Šipoš, Tanja / Miličević, Ivana / Siddique, Rafat	Model for mix design of brick aggregate concrete based on neural network modelling	757-769
Jadooe, Awad / Al-Mahaidi, Riadh / Abdouka, Kamiran	Modelling of NSM CFRP strips embedded in concrete after exposure to elevated temperature using epoxy adhesives	155-166
Boukhattem, Lahcen / Boumhaout, Mustapha / Hamdi, Hassan / Benhamou, Brahim / Ait Nouh, Fatima	Moisture content influence on the thermal conductivity of insulating building materials made from date palm fibers mesh	811-823
Sadowski, Łukasz / Popek, Mateusz / Czarnecki, Sławomir / Mathia, Thomas G.	Morphogenesis in solidification phases of lightweight concrete surface at early ages	96-103
Javilla, Barugahare / Mo, Liantong / Hao, Fang / Shu, Benan / Wu, Shaopeng	Multi-stress loading effect on rutting performance of asphalt mixtures based on wheel tracking testing	1-9
Praticò, Filippo G. / Astolfi, Armando	A new and simplified approach to assess the pavement surface micro- and macrotexture	476-483
Arifuzzaman, Md / Kim, Ho Sung	Novel flexural behaviour of sandwich structures made of perlite foam/sodium silicate core and paper skin	321-333
Alqahtani, Fahad K. / Ghataora, Gurmel / Khan, M. Iqbal / Dirar, Samir	Novel lightweight concrete containing manufactured plastic aggregate	386-397
Li, Ran / Lan, Congrong / Wu, Zhenzeng / Huang, Tengan / Chen, Xiaobin / Liao, Yuehua / Ye, Longfeng / Lin, Xiuduan / Yang, Yuming / Zheng, Yanmei / Xie, Yongqun / Zhuang, Qingping	A novel particleboard using unsaturated polyester resin as a formaldehyde-free adhesive	781-788
Razmi, A. / Mirsayar, M. M.	On the mixed mode I/II fracture properties of jute fiber-reinforced concrete	512-520
Graziani, Gabriela / Sassoni, Enrico / Scherer, George W. / Franzoni, Elisa	Penetration depth and redistribution of an aqueous ammonium phosphate solution used for porous limestone consolidation by brushing and immersion	571-578
Surana, Saarthak / Pillai, Radhakrishna G. / Santhanam, Manu	Performance evaluation of curing compounds using durability parameters	538-547
Wang, Dan / Hou, Pengkun / Zhang, Lina / Yang, Ping / Cheng, Xin	Photocatalytic and hydrophobic activity of cement-based materials from benzyl-terminated-TiO 2 spheres with core-shell structures	176-183
Pozo-Antonio, J. S. / Dionísio, A.	Physical-mechanical properties of mortars with addition of TiO 2 nanoparticles	261-272
Georgees, Romel N. / Hassan, Rayya A. / Evans, Robert P.	A potential use of a hydrophilic polymeric material to enhance durability properties of pavement materials	686-695
Kazmi, Syed Minhaj Saleem / Munir, Muhammad Junaid / Patnaikuni, Indubhushan / Wu, Yu-Fei	Pozzolanic reaction of sugarcane bagasse ash and its role in controlling alkali silica reaction	231-240
Zhu, Mengguang / Wang, Hao / Liu, Lili / Ji, Ru / Wang, Xidong	Preparation and characterization of permeable bricks from gangue and tailings	484-491
Mu, Song / Liu, Jiaping / Lin, Wei / Wang, Yaocheng / Liu, Jianzhong / Shi, Liang / Jiang, Qian	Property and microstructure of aluminosilicate inorganic coating for concrete: Role of water to solid ratio	846-856
Keppert, Martin / Urbanová, Martina / Brus, Jiri / Čáchová, Monika / Fořt, Jan / Trník, Anton / Scheinherrová, Lenka / Záleská, Martina / Černý, Robert	Rational design of cement composites containing pozzolanic additions	411-418
Han, Baoguo / Li, Zhen / Zhang, Liqing / Zeng, Shuzhu / Yu, Xun / Han, Bing / Ou, Jinping	Reactive powder concrete reinforced with nano SiO 2 -coated TiO 2	104-112
Chu, Hongqiang / Jiang, Linhua / Song, Zijian / Xu, Yi / Zhao, Sujing / Xiong, Chuansheng	Repair of concrete crack by pulse electro-deposition technique	241-248
Shaw, Ian / Andrawes, Bassem	Repair of damaged end regions of PC beams using externally bonded FRP shear reinforcement	184-194
Mirabdolazimi, S. M. / Shafabakhsh, Gh.	Rutting depth prediction of hot mix asphalts modified with forta fiber using artificial neural networks and genetic programming technique	666-674
Mo, Kim Hung / Yeoh, Khai Hung / Bashar, Iftekhair Ibnul / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Shear behaviour and mechanical properties of steel fibre-reinforced cement-based and geopolymer oil palm shell lightweight aggregate concrete	369-375
Visintin, P. / Ali, M. S. Mohamed / Albitar, M. / Lucas, W.	Shear behaviour of geopolymer concrete beams without stirrups	10-21
Zhang, Peng / Cong, Yuan / Vogel, Michael / Liu, Zhaolin / Müller, Harald S. / Zhu, Yaguang / Zhao, Tiejun	Steel reinforcement corrosion in concrete under combined actions: The role of freeze-thaw cycles, chloride ingress, and surface impregnation	113-121
Zhang, Chi / Sorelli, Luca / Fournier, Benoit / Duchesne, Josée / Bastien, Josée / Chen, Zhao	Stress-relaxation of crystalline alkali-silica reaction products: Characterization by micro- and nanoindentation and simplified modeling	455-464
Awoyera, P. O. / Dawson, A. R. / Thom, N. H. / Akinmusuru, J. O.	Suitability of mortars produced using laterite and ceramic wastes: Mechanical and microscale analysis	195-203
Mas, B. / Biggs, D. / Vieito, I. / Cladera, A. / Shaw, J. / Martínez-Abella, F.	Superelastic shape memory alloy cables for reinforced concrete applications	307-320
Liu, Kai / Lu, Lin / Wang, Fang / Liang, Wei	Theoretical and experimental study on multi-phase model of thermal conductivity for fiber reinforced concrete	465-475

Informations
sur cette fiche
IssueID
22635
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - septembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - septembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.