Construction and Building Materials - août 2017

Publié:	août 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Bagheri, Ali / Nazari, Ali / Sanjayan, Jay G. / Rajeev, Pathmanathan	Alkali activated materials vs geopolymers: Role of boron as an eco-friendly replacement	297-302
Tian, H. / Cui, Y. H. / Zhang, Y. X. / Yang, C.	The application of general self-consistent model on mechanical behaviour of fibre-reinforced cementitious composites	114-121
Valença, J. / Puente, I. / Júlio, E. / González-Jorge, H. / Arias-Sánchez, P.	Assessment of cracks on concrete bridges using image processing supported by laser scanning survey	668-678
Cabaleiro, M. / Hermida, J. / Riveiro, B. / Caamaño, J. C.	Automated processing of dense points clouds to automatically determine deformations in highly irregular timber structures	393-402
Gupta, Souradeep / Pang, Sze Dai / Kua, Harn Wei	Autonomous healing in concrete by bio-based healing agents – A review	419-428
Han, Bing / Xiang, Tian-Yu	Axial compressive stress-strain relation and Poisson effect of structural lightweight aggregate concrete	338-343
Sá Ribeiro, Ruy A. / Sá Ribeiro, Marilene G. / Miranda, Ires P. A.	Bending strength and nondestructive evaluation of structural bamboo	38-42
Zhu, Tingting / Lu, Xiancai / Dittrich, Maria	Calcification on mortar by live and UV-killed biofilm-forming cyanobacterial Gloeocapsa PCC73106	43-53
Bao, Jiuwen / Wang, Licheng	Capillary imbibition of water in discrete planar cracks	381-392
Liu, Jun / Ou, Guangfeng / Qiu, Qiwen / Chen, Xiaochi / Hong, Jing / Xing, Feng	Chloride transport and microstructure of concrete with/without fly ash under atmospheric chloride condition	493-501
Vasanelli, Emilia / Colangiuli, Donato / Calia, Angela / Sbartaï, Zoubir-Mehdi / Breysse, Denys	Combining non-invasive techniques for reliable prediction of soft stone strength in historic masonries	744-754
Belmokhtar, Noureddine / Ammari, Mohammed / Brigui, Jamal / Ben Allal, Laïla	Comparison of the microstructure and the compressive strength of two geopolymers derived from Metakaolin and an industrial sludge	621-629
Zhang, Wenyan / Choi, Hyeonggil / Sagawa, Takahiro / Hama, Yukio	Compressive strength development and durability of an environmental load-reduction material manufactured using circulating fluidized bed ash and blast-furnace slag	102-113
Zhang, Derun / Luo, Rong	Development of a method to determine surface energy components of mineral fillers	370-380
Vivek, S. S. / Dhinakaran, G.	Durability characteristics of binary blend high strength SCC	1-8
Alsheyab, Mohammad A. T. / Khedaywi, Taisir S.	Dynamic creep analysis of Electric Arc Furnace Dust (EAFD) – Modified asphalt	122-127
Lai, Jianzhong / Wang, Huifang / Yang, Haoruo / Zheng, Xiaobo / Wang, Qiang	Dynamic properties and SPH simulation of functionally graded cementitious composite subjected to repeated penetration	54-65
Anastasio, Sara / Perez Fortes, Ana Patricia / Hoff, Inge	Effect of aggregate petrology on the durability of asphalt pavements	652-657
Yin, Yanping / Chen, Huaxin / Kuang, Dongliang / Song, Lifang / Wang, Lu	Effect of chemical composition of aggregate on interfacial adhesion property between aggregate and asphalt	231-237
Yu, Xiao / Jiang, Linhua / Xu, Jinxia / Zu, Yuheng	Effect of Na2SiO3 content on passivation and corrosion behaviour of steel in a simulated pore solution of Na2SiO3-activated slag	156-164
Zhu, Chongzheng / Zhang, Henglong / Shi, Caijun / Li, Sheng	Effect of nano-zinc oxide and organic expanded vermiculite on rheological properties of different bitumens before and after aging	30-37
Li, Liping / Wu, Shaopeng / Liu, Gang / Cao, Tingwei / Amirkhanian, Serji	Effect of organo-montmorillonite nanoclay on VOCs inhibition of bitumen	429-435
Yu, Min / Bao, Hao / Ye, Jianqiao / Chi, Yin	The effect of random porosity field on supercritical carbonation of cement-based materials	144-155
Benli, Ahmet / Karatas, Mehmet / Gurses, Elif	Effect of sea water and MgSO4 solution on the mechanical properties and durability of self-compacting mortars with fly ash/silica fume	464-474
Ghahari, SeyedAli / Ghafari, Ehsan / Lu, Na	Effect of ZnO nanoparticles on thermoelectric properties of cement composite for waste heat harvesting	755-763
Orasutthikul, Shanya / Unno, Daiki / Yokota, Hiroshi	Effectiveness of recycled nylon fiber from waste fishing net with respect to fiber reinforced mortar	594-602
Saha, Suman / Rajasekaran, C.	Enhancement of the properties of fly ash based geopolymer paste by incorporating ground granulated blast furnace slag	615-620
Ardalan, R. Bani / Jamshidi, N. / Arabameri, H. / Joshaghani, A. / Mehrinejad, M. / Sharafi, P.	Enhancing the permeability and abrasion resistance of concrete using colloidal nano-SiO2 oxide and spraying nanosilicon practices	128-135
Kataware, Aniket V. / Singh, Dharamveer	Evaluating effectiveness of WMA additives for SBS modified binder based on viscosity, Superpave PG, rutting and fatigue performance	436-444
Rezaeimalek, Sepehr / Huang, Jie / Bin-Shafique, Sazzad	Evaluation of curing method and mix design of a moisture activated polymer for sand stabilization	210-220
Yim, Hong Jae / Lee, Hanju / Kim, Jae Hong	Evaluation of mortar setting time by using electrical resistivity measurements	679-686
Pamulapati, Yashwanth / Elseifi, Mostafa A. / Cooper, Samuel B. / Mohammad, Louay N. / Elbagalati, Omar	Evaluation of self-healing of asphalt concrete through induction heating and metallic fibers	66-75
Li, Yue / Li, Yaqiang	Experimental study on performance of rubber particle and steel fiber composite toughening concrete	267-275
Bhogayata, Ankur C. / Arora, Narendra K.	Fresh and strength properties of concrete reinforced with metalized plastic waste fibers	455-463
Alrashydah, Esra'a I. / Abo-Qudais, Saad A.	Hot mix asphalt time-temperature shifting and fitting techniques: A comparative study	514-523
Deboucha, Walid / Leklou, Nordine / Khelidj, Abdelhafid / Oudjit, Mohamed N.	Hydration development of mineral additives blended cement using thermogravimetric analysis (TGA): Methodology of calculating the degree of hydration	687-701
Shang, Dechen / Wang, Maoguo / Xia, Zhongsheng / Hu, Shuguang / Wang, Fazhou	Incorporation mechanism of titanium in Portland cement clinker and its effects on hydration properties	344-349
El-Gamal, S. M. A. / Hashem, F. S. / Amin, M. S.	Influence of carbon nanotubes, nanosilica and nanometakaolin on some morphological-mechanical properties of oil well cement pastes subjected to elevated water curing temperature and regular room air curing temperature	531-546
Aïssoun, B. M. / Gallias, J.-L. / Khayat, K. H.	Influence of formwork material on transport properties of self-consolidating concrete near formed surfaces	329-337
Al-Hedad, Abbas S. A. / Bambridge, Ebony / Hadi, Muhammad N. S.	Influence of geogrid on the drying shrinkage performance of concrete pavements	165-174
Batog, Maciej / Giergiczny, Zbigniew	Influence of mass concrete constituents on its properties	221-230
Mannan, Umme Amina / Ahmad, Mohiuddin / Tarefder, Rafiqul A.	Influence of moisture conditioning on healing of asphalt binders	360-369
Mo, Jinchuan / Ou, Zhongwen / Zhao, Xuxin / Liu, Jinming / Wang, Yahui	Influence of superabsorbent polymer on shrinkage properties of reactive powder concrete blended with granulated blast furnace slag	283-296
Bui, T. T. / Nana, W. S. A. / Abouri, S. / Limam, A. / Tedoldi, B. / Roure, T.	Influence of uniaxial tension and compression on shear strength of concrete slabs without shear reinforcement under concentrated loads	86-101
Roy, Manish / Hollmann, Corey / Wille, Kay	Influence of volume fraction and orientation of fibers on the pullout behavior of reinforcement bar embedded in ultra high performance concrete	582-593
Aattache, Amel / Soltani, Rabah / Mahi, Abdelkader	Investigations for properties improvement of recycled PE polymer particles-reinforced mortars for repair practice	603-614
Xiao, Feipeng / Xu, Siyuan / Hou, Xiangdao / Amirkhanian, Serji	Low temperature grade determinations of asphalt mortar without extraction before and after one year storage duration	475-484
Dadsetan, Sina / Bai, Jiping	Mechanical and microstructural properties of self-compacting concrete blended with metakaolin, ground granulated blast-furnace slag and fly ash	658-667
Li, Wengui / Luo, Zhiyu / Tao, Zhong / Duan, Wen Hui / Shah, Surendra P.	Mechanical behavior of recycled aggregate concrete-filled steel tube stub columns after exposure to elevated temperatures	571-581
Su, Chengdong / Lin, Haixiao	Mechanical performances of steel fiber reinforced high strength concrete disc under cyclic loading	276-282
Ramezanianpour, Ali Akbar / Mohammadi, Ahmad / Dehkordi, Erfan Riahi / Chenar, Qasem Bagheri	Mechanical properties and durability of roller compacted concrete pavements in cold regions	260-266
Ling, Tung-Chai / Mo, Kim Hung / Qu, Lie / Yang, Jiujun / Guo, Lei	Mechanical strength and durability performance of autoclaved lime-saline soil brick	403-409
Chaturabong, Preeda / Bahia, Hussain U.	Mechanisms of asphalt mixture rutting in the dry Hamburg Wheel Tracking test and the potential to be alternative test in measuring rutting resistance	175-182
Du, Ming Rui / Jing, Hong Wen / Duan, Wen Hui / Han, Guan Sheng / Chen, Shu Jian	Methylcellulose stabilized multi-walled carbon nanotubes dispersion for sustainable cement composites	76-85
Costa, U. / Mangialardi, T. / Paolini, A. E.	Minimizing alkali leaching in the concrete prism expansion test at 38 °C	547-554
Fernández-Fanjul, A. / Tenza-Abril, A. J. / Baeza-Brotons, F.	A new methodology for determining particle density and absorption of lightweight, normal-weight and heavy weight aggregates in aqueous medium	630-643
Nehdi, Moncef L. / Najjar, Manal F. / Soliman, Ahmed M. / Azabi, Tareq M.	Novel eco-efficient Two-Stage Concrete incorporating high volume recycled content for sustainable pavement construction	9-14
Liu, Jianhui / Shi, Caijun / Ma, Xianwei / Khayat, Kamal H. / Zhang, Jian / Wang, Dehui	An overview on the effect of internal curing on shrinkage of high performance cement-based materials	702-712
Flores, Yemcy Calcina / Cordeiro, Guilherme Chagas / Filho, Romildo Dias Toledo / Tavares, Luís Marcelo	Performance of Portland cement pastes containing nano-silica and different types of silica	524-530
Martens, K. / Caspeele, R. / Belis, J.	Performance of statically indeterminate reinforced glass beams – Experimental comparison with determinate systems and effect of a discontinuous glass section	251-259
Huang, Xiao / Hu, Shuguang / Wang, Fazhou / Liu, Yunpeng / Mu, Yuandong	Properties of alkali-activated slag with addition of cation exchange material	321-328
Nili, Mahmoud / Razmara, Mehrdad / Nili, Mojtaba / Razmara, Parisa	Proposing new methods to appraise segregation resistance of self-consolidating concrete based on electrical resistivity	192-198
Wozniak, Maciej / Tysmans, Tine / Verbruggen, Svetlana / Vantomme, John	Quality of the bond between a Strain Hardening Cement Composite stay-in-place formwork and concrete: Comparison of two experimental set-ups	764-774
Milani, Gabriele / Bertolesi, Elisa	Quasi-analytical homogenization approach for the non-linear analysis of in-plane loaded masonry panels	723-743
Egan, Galen / Kumar, Aditya / Neithalath, Narayanan / Sant, Gaurav	Re-examining the influence of the inclusion characteristics on the drying shrinkage of cementitious composites	713-722
Tong, Zheng / Gao, Jie / Zhang, Haitao	Recognition, location, measurement, and 3D reconstruction of concealed cracks using convolutional neural networks	775-787
Dehghan, Alireza / Peterson, Karl / Shvarzman, Asia	Recycled glass fiber reinforced polymer additions to Portland cement concrete	238-250
Tang, S. W. / Cai, X. H. / He, Z. / Zhou, W. / Shao, H. Y. / Li, Z. J. / Wu, T. / Chen, E.	The review of early hydration of cement-based materials by electrical methods	15-29
Santos, Winnie F. / Quattrone, Marco / John, Vanderley M. / Angulo, Sérgio C.	Roughness, wettability and water absorption of water repellent treated recycled aggregates	502-513
Yuan, Bin / Yang, Yuanguang / Wang, Yongqing / Zhang, Kaimin	Self-healing efficiency of EVA-modified cement for hydraulic fracturing wells	563-570
Rajabi, Ali M. / Omidi Moaf, Farzam	Simple empirical formula to estimate the main geomechanical parameters of preplaced aggregate concrete and conventional concrete	485-492
Li, Junxia / Dong, Zhili / Yang, En-Hua	Strain hardening cementitious composites incorporating high volumes of municipal solid waste incineration fly ash	183-191
Suksiripattanapong, Cherdsak / Kua, Teck-Ang / Arulrajah, Arul / Maghool, Farshid / Horpibulsuk, Suksun	Strength and microstructure properties of spent coffee grounds stabilized with rice husk ash and slag geopolymers	312-320
Chen, Da / Yu, Xiaotong / Guo, Mengyuan / Liao, Yingdi / Ouyang, Feng	Study on the mechanical properties of the mortars exposed to the sulfate attack of different concentrations under the triaxial compression with constant confining pressure	445-454
Ding, Yung-Chin / Cheng, Ta-Wui / Liu, Ping-Chun / Lee, Wei-Hao	Study on the treatment of BOF slag to replace fine aggregate in concrete	644-651
Mehta, Ankur / Siddique, Rafat	Sulfuric acid resistance of fly ash based geopolymer concrete	136-143
Shen, Dejian / Jiang, Jinliang / Wang, Wenting / Shen, Jiaxin / Jiang, Guoqing	Tensile creep and cracking resistance of concrete with different water-to-cement ratios at early age	410-418
Lee, Kyung-Ho / Yoon, Hyun-Sub / Yang, Keun-Hyeok	Tests on magnesium potassium phosphate composite mortars with different water-to-binder ratios and molar ratios of magnesium-to-phosphate	303-311
Rhee, Inkyu / Lee, Jun-Seok / Kim, Jin Hee / Kim, Yoong Ahm	Thermal performance, freeze-and-thaw resistance, and bond strength of cement mortar using rice husk-derived graphene	350-359
Lee, Jong-Han / Kighuta, Kabuyaya	Twin-twist effect of fibers on the pullout resistance in cementitious materials	555-562
Pahlavan, Parsa / Manzi, Stefania / Rodriguez-Estrada, Maria Teresa / Bignozzi, Maria Chiara	Valorization of spent cooking oils in hydrophobic waste-based lime mortars for restorative rendering applications	199-209

Informations
sur cette fiche
IssueID
22632
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - août 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - août 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.