Construction and Building Materials - mars 2017

Publié:	mars 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Martinho, Edite / Mendes, Manuela / Dionísio, Amélia	3D imaging of P-waves velocity as a tool for evaluation of heat induced limestone decay	119-128
Marecos, Vânia / Solla, Mercedes / Fontul, Simona / Antunes, Vitor	Assessing the pavement subgrade by combining different non-destructive methods	76-85
Youssef, Jim / Hadi, Muhammad N. S.	Axial load-bending moment diagrams of GFRP reinforced columns and GFRP encased square columns	550-564
Tennich, Mohsen / Ouezdou, Mongi Ben / Kallel, Abderrazek	Behavior of self-compacting concrete made with marble and tile wastes exposed to external sulfate attack	335-342
Liu, Huaxin / Yang, Jianwei / Wang, Xuezhi	Bond behavior between BFRP bar and recycled aggregate concrete reinforced with basalt fiber	477-483
Yue, Yanfei / Wang, Jing Jing / Basheer, P. A. Muhammed / Boland, John J. / Bai, Yun	Characterisation of carbonated Portland cement paste with optical fibre excitation Raman spectroscopy	369-376
Armengaud, Julie / Casaux-Ginestet, Géraldine / Cyr, Martin / Husson, Bernard / Jolin, Marc	Characterization of fresh dry-mix shotcrete and correlation to rebound	225-232
Karim, Mohammad Razaul / Hashim, Huzaifa / Razak, Hashim Abdul / Yusoff, Sumiani	Characterization of palm oil clinker powder for utilization in cement-based applications	21-29
Kuzielová, Eva / Žemlička, Matúš / Bartoničková, Eva / Palou, Martin T.	The correlation between porosity and mechanical properties of multicomponent systems consisting of Portland cement–slag–silica fume–metakaolin	306-314
Luo, Yaofei / Zhang, Zhengqi / Cheng, Gaoli / Zhang, Ke	The deterioration and performance improvement of long-term mechanical properties of warm-mix asphalt mixtures under special environmental conditions	622-631
Mahmoud, Aiman / Coleri, Erdem / Batti, James / Covey, David	Development of a field torque test to evaluate in-situ tack coat performance	377-385
Su, Yu / Wu, Chengqing / Li, Jun / Li, Zhong-Xian / Li, Wengui	Development of novel ultra-high performance concrete: From material to structure	517-528
Akhavan, Alireza / Catchmark, Jeffrey / Rajabipour, Farshad	Ductility enhancement of autoclaved cellulose fiber reinforced cement boards manufactured using a laboratory method simulating the Hatschek process	251-259
Nguyen, Dang Hanh / Boutouil, Mohamed / Sebaibi, Nassim / Baraud, Fabienne / Leleyter, Lydia	Durability of pervious concrete using crushed seashells	137-150
Garabito, Javier / Rodriguez, Ángel / Garabito, Jose Carlos / Calderon, Veronica	Durability of slate and zinc sheets in the rehabilitation of historical heritage. A case study	212-224
Shen, Dejian / Jiang, Jinliang / Jiao, Yang / Shen, Jiaxin / Jiang, Guoqing	Early-age tensile creep and cracking potential of concrete internally cured with pre-wetted lightweight aggregate	420-429
Torres, Anthony / Bartlett, Laura / Pilgrim, Cole	Effect of foundry waste on the mechanical properties of Portland Cement Concrete	674-681
Okba, Samir H. / Nasr, El-Sayed A. / Helmy, Amr I. I. / Yousef, Ibrahim Abdel-latif	Effect of thermal exposure on the mechanical properties of polymer adhesives	490-504
Xu, Ouming / Wang, Zhenjun / Wang, Rui	Effects of aggregate gradations and binder contents on engineering properties of cement emulsified asphalt mixtures	632-640
Wang, Dawei / Schacht, Andreas / Leng, Zhen / Leng, Chao / Kollmann, Jonas / Oeser, Markus	Effects of material composition on mechanical and acoustic performance of poroelastic road surface (PERS)	352-360
Moon, Gyu Don / Oh, Sungwoo / Jung, Sang Hwa / Choi, Young Cheol	Effects of the fineness of limestone powder and cement on the hydration and strength development of PLC concrete	129-136
Hung, Albert M. / Goodwin, Adrian / Fini, Elham H.	Effects of water exposure on bitumen surface microstructure	682-688
Rew, Younho / Baranikumar, Aishwarya / Tamashausky, Albert V. / El-Tawil, Sherif / Park, Philip	Electrical and mechanical properties of asphaltic composites containing carbon based fillers	394-404
Payakaniti, Panjasil / Pinitsoontorn, Supree / Thongbai, Prasit / Amornkitbamrung, Vittaya / Chindaprasirt, Prinya	Electrical conductivity and compressive strength of carbon fiber reinforced fly ash geopolymeric composites	164-176
Masoudi, Sajjad / Abtahi, Sayyed Mahdi / Goli, Ahmad	Evaluation of electric arc furnace steel slag coarse aggregate in warm mix asphalt subjected to long-term aging	260-266
Ouyang, Xiaowei / Ye, Guang / Van Breugel, Klaas	Experimental and numerical evaluation of mechanical properties of interface between filler and hydration products	538-549
Abedi Koupai, Shahram / Bakhshi, Ali / Valadoust Tabrizi, Vahid	Experimental investigation on effects of elastomer components on dynamic and mechanical properties in seismic isolator compounds	267-278
Choi, Si-Hyun / Lee, Han-Seung / Choi, Hyun-Kuk / Kim, Hyeong-chul / Min, Tae-Beom / Ismail, Mohamed A.	Experimental research on development of heated form incorporating exothermic reaction powder to protect concrete in cold weather	30-36
Zhang, Guohui / Li, Zongli / Zhang, Linfei / Shang, Yujuan / Wang, Hang	Experimental research on drying control condition with minimal effect on concrete strength	194-202
Hashimoto, Shinobu / Kusawake, Shohei / Daiko, Yusuke / Honda, Sawao / Iwamoto, Yuji	Fabrication of pure phase calcium carbonate hardened bodies as a means of creating novel geomimetic ceramics	405-410
Ahmmad, Rasel / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Ramli Sulong, N. H. / Yusuf, Moruf O. / Rehman, Muhammad Abdur	Feasibility study on the use of high volume palm oil clinker waste in environmental friendly lightweight concrete	94-103
Lara-Bocanegra, Antonio José / Majano-Majano, Almudena / Crespo, Jorge / Guaita, Manuel	Finger-jointed Eucalyptus globulus with 1C-PUR adhesive for high performance engineered laminated products	529-537
Liu, Jin-Cheng / Tan, Kang Hai	Fire resistance of strain hardening cementitious composite with hybrid PVA and steel fibers	600-611
Jin, Shanshan / Zhang, Jinxi / Han, Song	Fractal analysis of relation between strength and pore structure of hardened mortar	1-7
Mirzaei, Ghaneh / Mohebby, Behbood / Ebrahimi, Ghanbar	Glulam beam made from hydrothermally treated poplar wood with reduced moisture induced stresses	386-393
Zhang, Zhiquan / Zhang, Yufen / Yan, Changgen / Liu, Yunxiao	Influence of crushing index on properties of recycled aggregates pervious concrete	112-118
Lu, Xiaolei / Ye, Zhengmao / Zhang, Lina / Hou, Pengkun / Cheng, Xin	The influence of ethanol-diisopropanolamine on the hydration and mechanical properties of Portland cement	484-489
Tan, Xianjun / Chen, Weizhong / Wang, Jiuhong / Yang, Diansen / Qi, Xianyin / Ma, Yongshang / Wang, Xu / Ma, Shaosen / Li, Changjun	Influence of high temperature on the residual physical and mechanical properties of foamed concrete	203-211
Gomes, M. Glória / Flores-Colen, I. / Manga, L. M. / Soares, A. / de Brito, J.	The influence of moisture content on the thermal conductivity of external thermal mortars	279-286
Olawuyi, Babatunde J. / Boshoff, William P.	Influence of SAP content and curing age on air void distribution of high performance concrete using 3D volume analysis	580-589
Jiang, Yingjun / Xue, Jinshun / Chen, Zhejiang	Influence of volumetric property on mechanical properties of vertical vibration compacted asphalt mixture	612-621
Zhang, Jinrui / Liu, Chao / Sun, Ming / Li, Zongjin	An innovative corrosion evaluation technique for reinforced concrete structures using magnetic sensors	68-75
Sun, Hongfang / Ren, Zhili / Memon, Shazim Ali / Zhao, Diandian / Zhang, Xiaogang / Li, Dawang / Xing, Feng	Investigating drying behavior of cement mortar through electrochemical impedance spectroscopy analysis	361-368
Wang, Ming / Liu, Liping	Investigation of microscale aging behavior of asphalt binders using atomic force microscopy	411-419
Omran, Ahmed F. / D.-Morin, Etienne / Harbec, David / Tagnit-Hamou, Arezki	Long-term performance of glass-powder concrete in large-scale field applications	43-58
Li, Ming / Deng, Shuang / Yu, Yongjin / Jin, Jianzhou / Yang, Yujia / Guo, Xiaoyang	Mechanical properties and microstructure of oil well cement stone enhanced with Tetra-needle like ZnO whiskers	59-67
LaHucik, Jeff / Dahal, Sachindra / Roesler, Jeffery / Amirkhanian, Armen N.	Mechanical properties of roller-compacted concrete with macro-fibers	440-446
Charpe, Anuja U. / Latkar, M. V. / Chakrabarti, T.	Microbially assisted cementation – A biotechnological approach to improve mechanical properties of cement	472-476
Lopez Alvarez, Graciela / Nazari, Ali / Bagheri, Ali / Sanjayan, Jay G. / De Lange, Christo	Microstructure, electrical and mechanical properties of steel fibres reinforced cement mortars with partial metakaolin and limestone addition	8-20
Botella, Ramón / Pérez-Jiménez, Félix E. / Miró, Rodrigo / Martìnez, Adriana H.	New methodology to estimate the fatigue behavior of bituminous mixtures using a strain sweep test	233-240
Soualhi, Hamza / Kadri, El-Hadj / Bouvet, Adrien / Ngo, Tien-Tung / Cussigh, François / Belaidi, Akram-Salah-Eddine	New model to estimate plastic viscosity of eco-friendly and conventional concrete	323-334
Alonso-Domínguez, D. / Álvarez-Serrano, I. / Reyes, E. / Moragues, A.	New mortars fabricated by electrostatic dry deposition of nano and microsilica additions: Enhanced properties	186-193
Bogas, J. Alexandre / Cunha, Diogo	Non-structural lightweight concrete with volcanic scoria aggregates for lightweight fill in building's floors	151-163
Liu, Jian / Wu, Chengqing / Chen, Xiaowei	Numerical study of ultra-high performance concrete under non-deformable projectile penetration	447-458
Qu, Xiaoling / Zhao, Xuguang	Previous and present investigations on the components, microstructure and main properties of autoclaved aerated concrete – A review	505-516
Hwang, Chao-Lung / Chiang, Chi-Hung / Huynh, Trong-Phuoc / Vo, Duy-Hai / Jhang, Bo-Jyun / Ngo, Si-Huy	Properties of alkali-activated controlled low-strength material produced with waste water treatment sludge, fly ash, and slag	459-471
Nagrockienė, Džigita / Girskas, Giedrius / Skripkiūnas, Gintautas	Properties of concrete modified with mineral additives	37-42
Babafemi, A. J. / Boshoff, W. P.	Pull-out response of macro synthetic fibre from concrete matrix: Effect of loading rate and embedment length	590-599
Kim, Yong-Jic	Quality properties of self-consolidating concrete mixed with waste concrete powder	177-185
Girardi, F. / Giannuzzi, G. M. / Mazzei, D. / Salomoni, V. / Majorana, C. / Di Maggio, R.	Recycled additions for improving the thermal conductivity of concrete in preparing energy storage systems	565-579
Wang, Xuancang / Su, Ziyuan / Xu, Aimin / Zhou, Aiguo / Zhang, Haitao	Shear fatigue between asphalt pavement layers and its application in design	297-305
Adak, Dibyendu / Sarkar, Manas / Mandal, Saroj	Structural performance of nano-silica modified fly-ash based geopolymer concrete	430-439
Zheng, Da-peng / Wang, Dong-Min / Li, Duan-le / Ren, Cai-fu / Tang, Wai-ching	Study of high volume circulating fluidized bed fly ash on rheological properties of the resulting cement paste	86-93
Afonso, Márcia Lopes / Dinis-Almeida, Marisa / Fael, Cristina Sena	Study of the porous asphalt performance with cellulosic fibres	104-111
Chang, Xu / Wang, Guozhu / Liang, Zhengzhao / Yang, Jianhui / Tang, Chunan	Study on grout cracking and interface debonding of rockbolt grouted system	665-673
Xue, Bin / Wang, Huifeng / Pei, Jianzhong / Li, Rui / Zhang, Jiupeng / Fan, Zepeng	Study on self-healing microcapsule containing rejuvenator for asphalt	641-649
Gwon, Seongwoo / Jeong, Yeonung / Oh, Jae Eun / Shin, Myoungsu	Sustainable sulfur composites with enhanced strength and lightweightness using waste rubber and fly ash	650-664
Sevinç, Ahmet Hayrullah / Durgun, Muhammed Yasin / Eken, Mustafa	A Taguchi approach for investigating the engineering properties of concretes incorporating barite, colemanite, basaltic pumice and ground blast furnace slag	343-351
Boumhaout, Mustapha / Boukhattem, Lahcen / Hamdi, Hassan / Benhamou, Brahim / Ait Nouh, Fatima	Thermomechanical characterization of a bio-composite building material: Mortar reinforced with date palm fibers mesh	241-250
Dembovska, Laura / Bajare, Diana / Ducman, Vilma / Korat, Lidija / Bumanis, Girts	The use of different by-products in the production of lightweight alkali activated building materials	315-322
Meira, G. R. / Pinto, W. T. A. / Lima, E. E. P. / Andrade, C.	Vertical distribution of marine aerosol salinity in a Brazilian coastal area – The influence of wind speed and the impact on chloride accumulation into concrete	287-296

Informations
sur cette fiche
IssueID
22619
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mars 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mars 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.