Construction and Building Materials - mars 2016

Publié:	mars 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Zhang, S. S. / Yu, T.	Analytical solution for interaction forces in beams strengthened with near-surface mounted round bars	189-197
Formela, Krzysztof / Sulkowski, Michał / Saeb, Mohammad Reza / Colom, Xavier / Haponiuk, Józef T.	Assessment of microstructure, physical and thermal properties of bitumen modified with LDPE/GTR/elastomer ternary blends	160-167
Quang, Khai Mai / Phuoc Dang, V. B. / Han, Sang Whan / Shin, Myoungsu / Lee, Kihak	Behavior of high-performance fiber-reinforced cement composite columns subjected to horizontal biaxial and axial loads	89-101
Qian, Chunxiang / Ren, Lifu / Xue, Bin / Cao, Tianji	Bio-mineralization on cement-based materials consuming CO 2 from atmosphere	126-132
Baena, M. / Torres, L. / Turon, A. / Llorens, M. / Barris, C.	Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars	449-460
Aksogan, Orhan / Binici, Hanifi / Ortlek, Ersin	Durability of concrete made by partial replacement of fine aggregate by colemanite and barite and cement by ashes of corn stalk, wheat straw and sunflower stalk ashes	253-263
Lotfy, Abdurrahmaan / Hossain, Khandaker M. A. / Lachemi, Mohamed	Durability properties of lightweight self-consolidating concrete developed with three types of aggregates	43-54
Leong, Hsiao Yun / Ong, Dominic Ek Leong / Sanjayan, Jay G. / Nazari, Ali	The effect of different Na 2 O and K 2 O ratios of alkali activator on compressive strength of fly ash based-geopolymer	500-511
Shen, Dejian / Wang, Xudong / Cheng, Dabao / Zhang, Jinyang / Jiang, Guoqing	Effect of internal curing with super absorbent polymers on autogenous shrinkage of concrete at early age	512-522
Fidan, M. Said / Yaşar, Ş. Şadiye / Yaşar, Mehmet / Atar, Musa / Alkan, Elif	Effect of seasonal changes on the combustion characteristics of impregnated cedar ( Cedrus libani A. Rich.) wood	711-720
Ng, Serina / Jelle, Bjørn Petter / Zhen, Yingpeng / Wallevik, Ólafur Haralds	Effect of storage and curing conditions at elevated temperatures on aerogel-incorporated mortar samples based on UHPC recipe	640-649
Zheng, Deng-Deng / Ji, Tao / Wang, Can-Qiang / Sun, Chun-Jing / Lin, Xu-jian / Hossain, Khandaker Muhammed Anwar	Effect of the combination of fly ash and silica fume on water resistance of Magnesium–Potassium Phosphate Cement	415-421
Martinez, Patricia / Soto, Melissa / Zunino, Franco / Stuckrath, Claudia / Lopez, Mauricio	Effectiveness of tetra-ethyl-ortho-silicate (TEOS) consolidation of fired-clay bricks manufactured with different calcination temperatures	209-217
Duan, Ping / Yan, Chunjie / Luo, Wenjun / Zhou, Wei	Effects of adding nano-TiO 2 on compressive strength, drying shrinkage, carbonation and microstructure of fluidized bed fly ash based geopolymer paste	115-125
Liu, Kaihua / Yan, Jiachuan / Hu, Qiong / Sun, Yao / Zou, Chaoying	Effects of parent concrete and mixing method on the resistance to freezing and thawing of air-entrained recycled aggregate concrete	264-273
Jeong, Su-Gwang / Chang, Seong Jin / Wi, Seunghwan / Kang, Yujin / Lim, Jae-Han / Chang, Jae D. / Kim, Sumin	Energy efficient concrete with n-octadecane/xGnP SSPCM for energy conservation in infrastructure	543-549
Nguyen, Hoang-Anh / Chang, Ta-Peng / Shih, Jeng-Ywan / Chen, Chun-Tao / Nguyen, Tien-Dung	Engineering properties and durability of high-strength self-compacting concrete with no-cement SFC binder	670-677
Choi, Myoung Sung / Lee, Jung Soo / Ryu, Keum Seong / Koh, Kyung-Taek / Kwon, Seung Hee	Estimation of rheological properties of UHPC using mini slump test	632-639
Sodupe-Ortega, E. / Fraile-García, E. / Ferreiro-Cabello, J. / Sanz-Garcia, A.	Evaluation of crumb rubber as aggregate for automated manufacturing of rubberized long hollow blocks and bricks	305-316
Dondi, G. / Mazzotta, F. / Simone, A. / Vignali, V. / Sangiorgi, C. / Lantieri, C.	Evaluation of different short term aging procedures with neat, warm and modified binders	282-289
Abid, Sallal R. / Tayşi, Nildem / Özakça, Mustafa	Experimental analysis of temperature gradients in concrete box-girders	523-532
Su, Jun-Feng / Wang, Ying-Yuan / Han, Ning-Xu / Yang, Peng / Han, Shan	Experimental investigation and mechanism analysis of novel multi-self-healing behaviors of bitumen using microcapsules containing rejuvenator	317-329
Mei, Kuihua / Seracino, Rudolf / Lv, Zhitao	An experimental study on bond-type anchorages for carbon fiber-reinforced polymer cables	584-591
Guarin, Alvaro / Khan, Abdullah / Butt, Ali Azhar / Birgisson, Björn / Kringos, Nicole	An extensive laboratory investigation of the use of bio-oil modified bitumen in road construction	133-139
Zhang, Weiping / Liu, Xiguang / Gu, Xianglin	Fatigue behavior of corroded prestressed concrete beams	198-208
Huang, Kai / Xu, Tao / Li, Guofen / Jiang, Ruilin	The feasibility of DEM to analyze the temperature field of asphalt mixture	592-599
Yang, Huifeng / Liu, Weiqing / Lu, Weidong / Zhu, Shijun / Geng, Qifan	Flexural behavior of FRP and steel reinforced glulam beams: Experimental and theoretical evaluation	550-563
Hamrat, M. / Boulekbache, B. / Chemrouk, M. / Amziane, S.	Flexural cracking behavior of normal strength, high strength and high strength fiber concrete beams, using Digital Image Correlation technique	678-692
Bressi, Sara / Pittet, M. / Dumont, A. G. / Partl, M. N.	A framework for characterizing RAP clustering in asphalt concrete mixtures	564-574
Le, Thang / Remond, Sébastien / Le Saout, Gwenn / Garcia-Diaz, Eric	Fresh behavior of mortar based on recycled sand – Influence of moisture condition	35-42
Wei, Wei / Yuan, Yong / Igarashi, Akira / Tan, Ping / Iemura, Hirokazu / Zhu, Hongping	A generalized rate-dependent constitutive law for elastomeric bearings	693-699
Senin, S. F. / Hamid, R.	Ground penetrating radar wave attenuation models for estimation of moisture and chloride content in concrete slab	659-669
Soriano, L. / Payá, J. / Monzó, J. / Borrachero, M. V. / Tashima, M. M.	High strength mortars using ordinary Portland cement–fly ash–fluid catalytic cracking catalyst residue ternary system (OPC/FA/FCC)	228-235
Emon, Md. Abul Bashar / Manzur, Tanvir / Yazdani, Nur	Improving performance of light weight concrete with brick chips using low cost steel wire fiber	575-583
Ataie, Feraidon F. / Riding, Kyle A.	Influence of agricultural residue ash on early cement hydration and chemical admixtures adsorption	274-281
Siddique, Rafat / Nanda, Vasu / Kadri, El-Hadj / Khan, M. Iqbal / Singh, Malkit / Rajor, Anita	Influence of bacteria on compressive strength and permeation properties of concrete made with cement baghouse filter dust	461-469
Zak, Philip / Ashour, Taha / Korjenic, Azra / Korjenic, Sinan / Wu, Wei	The influence of natural reinforcement fibers, gypsum and cement on compressive strength of earth bricks materials	179-188
Vazquez, Patricia / Carrizo, Lucia / Thomachot-Schneider, Celine / Gibeaux, Soizic / Alonso, Francisco Javier	Influence of surface finish and composition on the deterioration of building stones exposed to acid atmospheres	392-403
Ait Oumeziane, Yacine / Moissette, Sophie / Bart, Marjorie / Lanos, Christophe	Influence of temperature on sorption process in hemp concrete	600-607
Kusiorowski, Robert / Zaremba, Teresa / Piotrowski, Jerzy	Influence of the type of pre-calcined asbestos containing wastes on the properties of sintered ceramics	422-429
Wang, Zigeng / Dai, Qingli / Yang, Xu	Integrated computational–experimental approach for evaluating recovered fracture strength after induction healing of asphalt concrete beam samples	700-710
Tong, Teng / Fan, Zhou / Liu, Qiong / Wang, Sen / Tan, Susheng / Yu, Qiang	Investigation of the effects of graphene and graphene oxide nanoplatelets on the micro- and macro-properties of cementitious materials	102-114
Hou, Haobo / Wang, Teng / Wu, Shaopeng / Xue, Yongjie / Tan, Ruiqi / Chen, Juyong / Zhou, Min	Investigation on the pavement performance of asphalt mixture based on predicted dynamic modulus	11-17
Liu, Jun / Yan, Kezhen / You, Lingyun / Ge, Dongdong / Wang, Zexing	Laboratory performance of warm mix asphalt binder containing polyphosphoric acid	218-227
Liu, Huajie / Bu, Yuhuan / Nazari, Ali / Sanjayan, Jay G. / Shen, Zhonghou	Low elastic modulus and expansive well cement system: The application of gypsum microsphere	27-34
Choubey, Rajendra Kumar / Kumar, Shailendra / Chakradhara Rao, M.	Modeling of fracture parameters for crack propagation in recycled aggregate concrete	168-178
Sonebi, Mohammed / Cevik, Abdulkadir / Grünewald, Steffen / Walraven, Joost	Modelling the fresh properties of self-compacting concrete using support vector machine approach	55-64
Ktari, Rahma / Millien, Anne / Fouchal, Fazia / Pop, Ion-Octavian / Petit, Christophe	Pavement interface damage behavior in tension monotonic loading	430-442
Lund, M. S. M. / Hansen, K. K. / Truelsen, R. / Johansen, L.	Pervious concrete fill in Pearl-Chain Bridges: Using small-scale results in full-scale implementation	404-414
Aboustait, Mohammed / Kim, Taehwan / Ley, M. Tyler / Davis, Jeffrey M.	Physical and chemical characteristics of fly ash using automated scanning electron microscopy	1-10
Zapién-Castillo, Samuel / Rivera-Armenta, José Luis / Chávez-Cinco, María Yolanda / Salazar-Cruz, Beatriz Adriana / Mendoza-Martínez, Ana María	Physical and rheological properties of asphalt modified with SEBS/montmorillonite nanocomposite	349-356
Rizvi, Hashim R. / Khattak, Mohammad Jamal / Madani, Mohammad / Khattab, Ahmed	Piezoresistive response of conductive Hot Mix Asphalt mixtures modified with carbon nanofibers	618-631
Chikouche, Mohamed Aziz / Ghorbel, Elhem / Bibi, Mekki	The possibility of using dredging sludge in manufacturing cements: Optimization of heat treatment cycle and ratio replacement	330-341
González-Taboada, Iris / González-Fonteboa, Belén / Martínez-Abella, Fernando / Pérez-Ordóñez, Juan Luis	Prediction of the mechanical properties of structural recycled concrete using multivariable regression and genetic programming	480-499
Chen, Yanjuan / Gao, Jianming / Tang, Luping / Li, Xuehong	Resistance of concrete against combined attack of chloride and sulfate under drying–wetting cycles	650-658
Saba, N. / Jawaid, M. / Alothman, Othman Y. / Paridah, M. T.	A review on dynamic mechanical properties of natural fibre reinforced polymer composites	149-159
Gama, Dennyele Alves / Rosa Júnior, José Manoel / de Melo, Tomas Jeferson Alves / Rodrigues, John Kennedy Guedes	Rheological studies of asphalt modified with elastomeric polymer	290-295
Imaninasab, Reaz / Bakhshi, Behazad / Shirini, Bahram	Rutting performance of rubberized porous asphalt using Finite Element Method (FEM)	382-391
Li, Qingzhu / Liu, Qin / Peng, Bing / Chai, Liyuan / Liu, Hui	Self-cleaning performance of TiO 2 -coating cement materials prepared based on solidification/stabilization of electrolytic manganese residue	236-242
Dong, Biqin / Fang, Guohao / Ding, Weijian / Liu, Yuqing / Zhang, Jianchao / Han, Ningxu / Xing, Feng	Self-healing features in cementitious material with urea–formaldehyde/epoxy microcapsules	608-617
Yang, Haifeng / Qin, Yinghong / Liao, Yi / Chen, Wei	Shear behavior of recycled aggregate concrete after exposure to high temperatures	374-381
Chiker, T. / Aggoun, S. / Houari, H. / Siddique, R.	Sodium sulfate and alternative combined sulfate/chloride action on ordinary and self-consolidating PLC-based concretes	342-348
Caggegi, Carmelo / Chevalier, Luc / Pensée, Vincent / Cuomo, Massimo	Strain and shear stress fields analysis by means of Digital Image Correlation on CFRP to brick bonded joints fastened by fiber anchors	78-88
Ameri, Mahmoud / Nowbakht, Shams / Molayem, Mohammad / Mirabimoghaddam, Mohammad H.	A study on fatigue modeling of hot mix asphalt mixtures based on the viscoelastic continuum damage properties of asphalt binder	243-252
Li, Wenchen / Fall, Mamadou	Sulphate effect on the early age strength and self-desiccation of cemented paste backfill	296-304
Bissoli-Dalvi, Márcia / Nico-Rodrigues, Edna Aparecida / de Alvarez, Cristina Engel / Saelzer Fuica, Gerardo Erich / Montarroyos, Dielly Christine Guedes	The sustainability of the materials under the approach of ISMAS	357-363
Bernat-Maso, Ernest / Gil, Lluís / Escrig, Christian	Textile-reinforced rammed earth: Experimental characterisation of flexural strength and thoughness	470-479
Nguyen, Khoa Tan / Ahn, Namshik / Le, Tuan Anh / Lee, Kihak	Theoretical and experimental study on mechanical properties and flexural strength of fly ash-geopolymer concrete	65-77
Stroh, J. / Schlegel, M.-C. / Schmidt, W. / Thi, Y. Nguyen / Meng, B. / Emmerling, F.	Time-resolved in situ investigation of Portland cement hydration influenced by chemical admixtures	18-26
Mohammed, Thaer Jasim / Bakar, B. H. Abu / Muhamad Bunnori, N.	Torsional improvement of reinforced concrete beams using ultra high-performance fiber reinforced concrete (UHPFC) jackets – Experimental study	533-542
Santamaria, Amaia / Rojí, Eduardo / Skaf, Marta / Marcos, Ignacio / Gonzalez, Javier J.	The use of steelmaking slags and fly ash in structural mortars	364-373
Atique, Farzana / Attoh-Okine, Nii	Using copula method for pipe data analysis	140-148
Wang, Qiang / Li, Shuo / Wu, Xiaoyu / Wang, Shifeng / Ouyang, Chunfa	Weather aging resistance of different rubber modified asphalts	443-448

Informations
sur cette fiche
IssueID
22589
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mars 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mars 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.