Construction and Building Materials - novembre 2015

Publié:	novembre 2015

Auteur(s)	Titre	Page(s)
Choi, Young Cheol / Choi, Seongcheol	Alkali–silica reactivity of cementitious materials using ferro-nickel slag fine aggregates produced in different cooling conditions	279-287
Sun, Yiren / Chen, Jingyun / Huang, Baoshan	Characterization of asphalt concrete linear viscoelastic behavior utilizing Havriliak–Negami complex modulus model	226-234
Shaikh, Faiz Uddin Ahmed / Supit, Steve W. M.	Chloride induced corrosion durability of high volume fly ash concretes containing nano particles	208-225
Bressi, Sara / Dumont, André-Gilles / Pittet, Michel	Cluster phenomenon and partial differential aging in RAP mixtures	288-297
Dong, Ya Hong / Jaillon, Lara / Chu, Peggy / Poon, C. S.	Comparing carbon emissions of precast and cast-in-situ construction methods – A case study of high-rise private building	39-53
He, Min-juan / Liu, Hui-fen	Comparison of glulam post-to-beam connections reinforced by two different dowel-type fasteners	99-108
Varnavina, Aleksandra V. / Khamzin, Aleksey K. / Sneed, Lesley H. / Torgashov, Evgeniy V. / Anderson, Neil L. / Maerz, Norbert H. / Boyko, Kenneth J.	Concrete bridge deck assessment: Relationship between GPR data and concrete removal depth measurements collected after hydrodemolition	26-38
Li, Rui / Zhou, Tianshu / Pei, Jianzhong	Design, preparation and properties of microcapsules containing rejuvenator for asphalt	143-149
Piasta, Wojciech / Sikora, Hubert	Effect of air entrainment on shrinkage of blended cements concretes	298-307
Shen, Dejian / Wang, Tao / Chen, Ying / Wang, Mingliang / Jiang, Guoqing	Effect of internal curing with super absorbent polymers on the relative humidity of early-age concrete	246-253
Ahmad, Shamsad / Zubair, Ahmed / Maslehuddin, Mohammed	Effect of key mixture parameters on flow and mechanical properties of reactive powder concrete	73-81
Hassan, N. A. / Khan, R. / Raaberg, J. / Lo Presti, D.	Effect of mixing time on reclaimed asphalt mixtures: An investigation by means of imaging techniques	54-61
Yan, Libo / Chouw, Nawawi	Effect of water, seawater and alkaline solution ageing on mechanical properties of flax fabric/epoxy composites used for civil engineering applications	118-127
Chi, Maochieh	Effects of modulus ratio and dosage of alkali-activated solution on the properties and micro-structural characteristics of alkali-activated fly ash mortars	128-136
Park, Sun-Jong / Yim, Hong Jae / Kwak, Hyo-Gyoung	Effects of post-fire curing conditions on the restoration of material properties of fire-damaged concrete	90-98
Pieralisi, R. / Cavalaro, S. H. P. / Aguado, A.	Evolutionary lattice model for the compaction of pervious concrete in the fresh state	11-25
Andor, K. / Lengyel, A. / Polgár, R. / Fodor, T. / Karácsonyi, Z.	Experimental and statistical analysis of spruce timber beams reinforced with CFRP fabric	200-207
Ghouleh, Zaid / Guthrie, Rodrick I. L. / Shao, Yixin	High-strength KOBM steel slag binder activated by carbonation	175-183
Li, Xuerun / Shen, Xiaodong / Xu, Jie / Li, Xiaodong / Ma, Suhua	Hydration properties of the alite–ye'elimite cement clinker synthesized by reformation	254-259
Song, Zijian / Jiang, Linhua / Liu, Jianzhong / Liu, Jiaping	Influence of cation type on diffusion behavior of chloride ions in concrete	150-158
Siad, Hocine / Alyousif, Ahmed / Keskin, Ozlem Kasap / Keskin, Suleyman Bahadir / Lachemi, Mohamed / Şahmaran, Mustafa / Hossain, Khandaker M. Anwar	Influence of limestone powder on mechanical, physical and self-healing behavior of Engineered Cementitious Composites	1-10
Shen, Dejian / Jiang, Jinliang / Shen, Jiaxin / Yao, Panpan / Jiang, Guoqing	Influence of prewetted lightweight aggregates on the behavior and cracking potential of internally cured concrete at an early age	260-271
Faruk, Abu N. M. / Lee, Sang I. / Zhang, Jun / Naik, Bhaven / Walubita, Lubinda F.	Measurement of HMA shear resistance potential in the lab: The Simple Punching Shear Test	62-72
Iucolano, Fabio / Caputo, Domenico / Leboffe, Flavio / Liguori, Barbara	Mechanical behavior of plaster reinforced with abaca fibers	184-191
Yu, Jiangtao / Lin, Jianhui / Zhang, Zhigang / Li, Victor C.	Mechanical performance of ECC with high-volume fly ash after sub-elevated temperatures	82-89
Alwash, Maitham / Breysse, Denys / Sbartaï, Zoubir Mehdi	Non-destructive strength evaluation of concrete: Analysis of some key factors using synthetic simulations	235-245
Vegas, I. / Cano, M. / Arribas, I. / Frías, M. / Rodríguez, O.	Physical–mechanical behavior of binary cements blended with thermally activated coal mining waste	169-174
Tung, Nguyen Duc / Tue, Nguyen Viet	Post-peak behavior of concrete specimens undergoing deformation localization in uniaxial compression	109-117
Lin, Juntao / Wei, Tanzhong / Hong, Jinxiang / Zhao, Yongli / Liu, Jiaping	Research on development mechanism of early-stage strength for cold recycled asphalt mixture using emulsion asphalt	137-142
Guizzardi, M. / Carmeliet, J. / Derome, D.	Risk analysis of biodeterioration of wooden beams embedded in internally insulated masonry walls	159-168
Han, Min-Cheol / Han, Dongyeop / Shin, Jae-Kyung	Use of bottom ash and stone dust to make lightweight aggregate	192-199
Liguori, B. / Iucolano, F. / de Gennaro, B. / Marroccoli, M. / Caputo, D.	Zeolitized tuff in environmental friendly production of cementitious material: Chemical and mechanical characterization	272-278

Auteur(s)

Titre

Page(s)

Choi, Young Cheol / Choi, Seongcheol

Alkali–silica reactivity of cementitious materials using ferro-nickel slag fine aggregates produced in different cooling conditions

279-287

Sun, Yiren / Chen, Jingyun / Huang, Baoshan

Characterization of asphalt concrete linear viscoelastic behavior utilizing Havriliak–Negami complex modulus model

226-234

Shaikh, Faiz Uddin Ahmed / Supit, Steve W. M.

Chloride induced corrosion durability of high volume fly ash concretes containing nano particles

208-225

Bressi, Sara / Dumont, André-Gilles / Pittet, Michel

Cluster phenomenon and partial differential aging in RAP mixtures

288-297

Dong, Ya Hong / Jaillon, Lara / Chu, Peggy / Poon, C. S.

Comparing carbon emissions of precast and cast-in-situ construction methods – A case study of high-rise private building

39-53

He, Min-juan / Liu, Hui-fen

Comparison of glulam post-to-beam connections reinforced by two different dowel-type fasteners

99-108

Varnavina, Aleksandra V. / Khamzin, Aleksey K. / Sneed, Lesley H. / Torgashov, Evgeniy V. / Anderson, Neil L. / Maerz, Norbert H. / Boyko, Kenneth J.

Concrete bridge deck assessment: Relationship between GPR data and concrete removal depth measurements collected after hydrodemolition

26-38

Li, Rui / Zhou, Tianshu / Pei, Jianzhong

Design, preparation and properties of microcapsules containing rejuvenator for asphalt

143-149

Piasta, Wojciech / Sikora, Hubert

Effect of air entrainment on shrinkage of blended cements concretes

298-307

Shen, Dejian / Wang, Tao / Chen, Ying / Wang, Mingliang / Jiang, Guoqing

Effect of internal curing with super absorbent polymers on the relative humidity of early-age concrete

246-253

Ahmad, Shamsad / Zubair, Ahmed / Maslehuddin, Mohammed

Effect of key mixture parameters on flow and mechanical properties of reactive powder concrete

73-81

Hassan, N. A. / Khan, R. / Raaberg, J. / Lo Presti, D.

Effect of mixing time on reclaimed asphalt mixtures: An investigation by means of imaging techniques

54-61

Yan, Libo / Chouw, Nawawi

Effect of water, seawater and alkaline solution ageing on mechanical properties of flax fabric/epoxy composites used for civil engineering applications

118-127

Chi, Maochieh

Effects of modulus ratio and dosage of alkali-activated solution on the properties and micro-structural characteristics of alkali-activated fly ash mortars

128-136

Park, Sun-Jong / Yim, Hong Jae / Kwak, Hyo-Gyoung

Effects of post-fire curing conditions on the restoration of material properties of fire-damaged concrete

90-98

Pieralisi, R. / Cavalaro, S. H. P. / Aguado, A.

Evolutionary lattice model for the compaction of pervious concrete in the fresh state

11-25

Andor, K. / Lengyel, A. / Polgár, R. / Fodor, T. / Karácsonyi, Z.

Experimental and statistical analysis of spruce timber beams reinforced with CFRP fabric

200-207

Ghouleh, Zaid / Guthrie, Rodrick I. L. / Shao, Yixin

High-strength KOBM steel slag binder activated by carbonation

175-183

Li, Xuerun / Shen, Xiaodong / Xu, Jie / Li, Xiaodong / Ma, Suhua

Hydration properties of the alite–ye'elimite cement clinker synthesized by reformation

254-259

Song, Zijian / Jiang, Linhua / Liu, Jianzhong / Liu, Jiaping

Influence of cation type on diffusion behavior of chloride ions in concrete

150-158

Siad, Hocine / Alyousif, Ahmed / Keskin, Ozlem Kasap / Keskin, Suleyman Bahadir / Lachemi, Mohamed / Şahmaran, Mustafa / Hossain, Khandaker M. Anwar

Influence of limestone powder on mechanical, physical and self-healing behavior of Engineered Cementitious Composites

1-10

Shen, Dejian / Jiang, Jinliang / Shen, Jiaxin / Yao, Panpan / Jiang, Guoqing

Influence of prewetted lightweight aggregates on the behavior and cracking potential of internally cured concrete at an early age

260-271

Faruk, Abu N. M. / Lee, Sang I. / Zhang, Jun / Naik, Bhaven / Walubita, Lubinda F.

Measurement of HMA shear resistance potential in the lab: The Simple Punching Shear Test

62-72

Iucolano, Fabio / Caputo, Domenico / Leboffe, Flavio / Liguori, Barbara

Mechanical behavior of plaster reinforced with abaca fibers

184-191

Yu, Jiangtao / Lin, Jianhui / Zhang, Zhigang / Li, Victor C.

Mechanical performance of ECC with high-volume fly ash after sub-elevated temperatures

82-89

Alwash, Maitham / Breysse, Denys / Sbartaï, Zoubir Mehdi

Non-destructive strength evaluation of concrete: Analysis of some key factors using synthetic simulations

235-245

Vegas, I. / Cano, M. / Arribas, I. / Frías, M. / Rodríguez, O.

Physical–mechanical behavior of binary cements blended with thermally activated coal mining waste

169-174

Tung, Nguyen Duc / Tue, Nguyen Viet

Post-peak behavior of concrete specimens undergoing deformation localization in uniaxial compression

109-117

Lin, Juntao / Wei, Tanzhong / Hong, Jinxiang / Zhao, Yongli / Liu, Jiaping

Research on development mechanism of early-stage strength for cold recycled asphalt mixture using emulsion asphalt

137-142

Guizzardi, M. / Carmeliet, J. / Derome, D.

Risk analysis of biodeterioration of wooden beams embedded in internally insulated masonry walls

159-168

Han, Min-Cheol / Han, Dongyeop / Shin, Jae-Kyung

Use of bottom ash and stone dust to make lightweight aggregate

192-199

Liguori, B. / Iucolano, F. / de Gennaro, B. / Marroccoli, M. / Caputo, D.

Zeolitized tuff in environmental friendly production of cementitious material: Chemical and mechanical characterization

272-278

Publicité

Construction and Building Materials - novembre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - novembre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.