Construction and Building Materials - février 2015

Publié:	février 2015

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Gomathi, P. / Sivakumar, A.	Accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete	276-287
Reixach, R. / Del Rey, R. / Alba, J. / Arbat, G. / Espinach, F. X. / Mutjé, P.	Acoustic properties of agroforestry waste orange pruning fibers reinforced polypropylene composites as an alternative to laminated gypsum boards	124-129
Schneider, J. / Shen, Y. / Stiemer, S. F. / Tesfamariam, S.	Assessment and comparison of experimental and numerical model studies of cross-laminated timber mechanical connections under cyclic loading	197-212
La Russa, M. F. / Belfiore, C. M. / Fichera, G. V. / Maniscalco, R. / Calabrò, C. / Ruffolo, S. A. / Pezzino, A.	The behaviour to weathering of the Hyblean limestone in the Baroque architecture of the Val di Noto (SE Sicily): An experimental study on the "calcare a lumachella" stone	7-19
Hassan, Shukur Abu / Gholami, Mehran / Ismail, Yob Saed / Sam, Abdul Rahman Mohd	Characteristics of concrete/CFRP bonding system under natural tropical climate	297-306
Blankson, Marva Angela / Erdem, Savaş	Comparison of the effect of organic and inorganic corrosion inhibitors on the rheology of self-compacting concrete	59-65
Assaad, Joseph J.	Correlating water extraction to viscosity variations of injection grouts	74-82
Qian, Zhendong / Lu, Qing	Design and laboratory evaluation of small particle porous epoxy asphalt surface mixture for roadway pavements	110-116
Lv, Heng-Lin / Wu, Yuan-Zhou / Fang, Zhong-Nian / Zhou, Shu-chun	Deterioration behavior of reinforced concrete beam under compound effects of acid-salt mist and carbon dioxide	253-259
Neramitkornburi, Anek / Horpibulsuk, Suksun / Shen, Shui Long / Chinkulkijniwat, Avirut / Arulrajah, Arul / Disfani, Mahdi Miri	Durability against wetting–drying cycles of sustainable Lightweight Cellular Cemented construction material comprising clay and fly ash wastes	41-49
Bravo, Miguel / de Brito, Jorge / Pontes, Jorge / Evangelista, Luís	Durability performance of concrete with recycled aggregates from construction and demolition waste plants	357-369
Barluenga, Gonzalo / Puentes, Javier / Palomar, Irene	Early age monitoring of self-compacting concrete with mineral additions	66-73
Alam, I. / Naseer, A. / Shah, A. A.	Economical stabilization of clay for earth buildings construction in rainy and flood prone areas	154-159
Fares, G.	Effect of slump cone orientation on the slump flow time (T50) and stability of sustainable self-compacting concrete containing limestone filler	145-153
Hosseini, Sajjad / Heidarpour, Amin / Collins, Frank / Hutchinson, Christopher R.	Effect of strain ageing on the mechanical properties of partially damaged structural mild steel	83-93
Kou, Shi-Cong / Poon, Chi-Sun	Effect of the quality of parent concrete on the properties of high performance recycled aggregate concrete	501-508
Hong, Sungnam / Park, Sun-Kyu	Effect of vehicle-induced vibrations on early-age concrete during bridge widening	179-186
Neves Junior, Alex / Filho, Romildo Dias Toledo / de Moraes Rego Fairbairn, Eduardo / Dweck, Jo	The effects of the early carbonation curing on the mechanical and porosity properties of high initial strength Portland cement pastes	448-454
Sanchez, L. F. M. / Fournier, B. / Jolin, M. / Bastien, J.	Evaluation of the Stiffness Damage Test (SDT) as a tool for assessing damage in concrete due to alkali-silica reaction (ASR): Input parameters and variability of the test responses	20-32
Pozo-Antonio, J. S.	Evolution of mechanical properties and drying shrinkage in lime-based and lime cement-based mortars with pure limestone aggregate	472-478
Zong, Liang / Shi, Gang / Wang, Yuanqing	Experimental investigation and numerical simulation on fatigue crack behavior of bridge steel WNQ570 base metal and butt weld	419-429
Janfeshan Araghi, H. / Nikbin, I. M. / Rahimi Reskati, S. / Rahmani, E. / Allahyari, H.	An experimental investigation on the erosion resistance of concrete containing various PET particles percentages against sulfuric acid attack	461-471
Ng, Serina / Jelle, Bjørn Petter / Sandberg, Linn Ingunn Christie / Gao, Tao / Wallevik, Ólafur Haralds	Experimental investigations of aerogel-incorporated ultra-high performance concrete	307-316
Huang, Dongsheng / Bian, Yuling / Zhou, Aiping / Sheng, Baolu	Experimental study on stress–strain relationships and failure mechanisms of parallel strand bamboo made from phyllostachys	130-138
Liguori, B. / Caputo, D. / Iucolano, F.	Fiber-reinforced lime-based mortars: Effect of zeolite addition	455-460
Aure, Temesgen W. / Ioannides, Anastasios M.	Fracture analysis of aggregate interlock jointed slabs-on-grade	340-348
Rey, J. / Martinez, J. / Vera, P. / Ruiz, N. / Cañadas, F. / Montiel, V.	Ground-penetrating radar method used for the characterisation of ornamental stone quarries	439-447
Soltanzadeh, F. / Barros, J. A. O. / Santos, R. F. C.	High performance fiber reinforced concrete for the shear reinforcement: Experimental and numerical research	94-109
Lv, Jianfu / Mao, Jize / Ba, Hengjing	Influence of marine microorganisms on the permeability and microstructure of mortar	33-40
Buss, Ashley / Williams, R. Christopher / Schram, Scott	The influence of warm mix asphalt on binders in mixes that contain recycled asphalt materials	50-58
Pang, Xueyu / Boul, Peter / Cuello Jimenez, Walmy	Isothermal calorimetry study of the effect of chloride accelerators on the hydration kinetics of oil well cement	260-269
Rodrigues, R. / de Brito, J. / Sardinha, M.	Mechanical properties of structural concrete containing very fine aggregates from marble cutting sludge	349-356
Khan, Rawid / Grenfell, James / Collop, Andrew	Micromechanical modelling of typical Dense Bitumen Macadam (DBM) from laboratory testing and X-ray Computed Tomography (CT)	1-6
Jiang, Chao / Gu, Xianglin / Zhang, Weiping / Zou, Wei	Modeling of carbonation in tensile zone of plain concrete beams damaged by cyclic loading	479-488
Qureshi, Jawed / Mottram, J. Toby	Moment-rotation response of nominally pinned beam-to-column joints for frames of pultruded fibre reinforced polymer	396-403
Mai, Tien Chinh / Razafindratsima, Stephen / Sbartaï, Zoubir Mehdi / Demontoux, François / Bos, Frédéric	Non-destructive evaluation of moisture content of wood material at GPR frequency	213-217
Part, Wei Ken / Ramli, Mahyuddin / Ban Cheah, Chee	An overview on the influence of various factors on the properties of geopolymer concrete derived from industrial by-products	370-395
Chen, Wensu / Hao, Hong	Performance of structural insulated panels with rigid skins subjected to windborne debris impacts – Experimental investigations	241-252
Silva, R. V. / de Brito, J. / Dhir, R. K.	Prediction of the shrinkage behavior of recycled aggregate concrete: A review	327-339
Islam, Mohammad S.	Prediction of ultimate expansion of ASTM C 1260 for various alkali solutions using the proposed decay model	317-326
Liu, Weizhen / Wu, Ting / Li, Zhuo / Hao, XiaoJun / Lu, Anxian	Preparation and characterization of ceramic substrate from tungsten mine tailings	139-144
Pichniarczyk, Paweł / Niziurska, Małgorzata	Properties of ceramic tile adhesives modified by different viscosity hydroxypropyl methylcellulose	227-232
Ge, Zhesheng / Li, Hui / Han, Zhetai / Zhang, Qingshan	Properties of cold mix asphalt mixtures with reclaimed granular aggregate from crushed PCC pavement	404-408
Zhang, Y. / Guo, H. X. / Cheng, X. H.	Role of calcium sources in the strength and microstructure of microbial mortar	160-167
Moradabadi, Ehsan / Laefer, Debra F. / Clarke, Julie A. / Lourenço, Paulo B.	A semi-random field finite element method to predict the maximum eccentric compressive load for masonry prisms	489-500
Chang, Ilhan / Prasidhi, Awlia Kharis / Im, Jooyoung / Cho, Gye-Chun	Soil strengthening using thermo-gelation biopolymers	430-438
Yu, Haiyan / Zheng, Li / Yang, Jiujun / Yang, Leilei	Stabilised compressed earth bricks made with coastal solonchak	409-418
Gómez-Meijide, B. / Pérez, I. / Airey, G. / Thom, N.	Stiffness of cold asphalt mixtures with recycled aggregates from construction and demolition waste	168-178
Park, Yeonho / Abolmaali, Ali / Mohammadagha, Mohammad / Lee, Sugyu	Structural performance of dry-cast rubberized concrete pipes with steel and synthetic fibers	218-226
Ambily, P. S. / Umarani, C. / Ravisankar, K. / Prem, Prabhat Ranjan / Bharatkumar, B. H. / Iyer, Nagesh R.	Studies on ultra high performance concrete incorporating copper slag as fine aggregate	233-240
Feng, Huan / Pettinari, Matteo / Hofko, Bernhard / Stang, Henrik	Study of the internal mechanical response of an asphalt mixture by 3-D discrete element modeling	187-196
Wu, G. F. / Zhu, E. C. / Zhou, H. J. / Pan, J. L.	Testing and modelling of shearwalls studded with small-diameter round timber under cyclic lateral load	288-296
Brovelli, Claudio / Crispino, Maurizio / Pais, Jorge / Pereira, Paulo	Using polymers to improve the rutting resistance of asphalt concrete	117-123
Ganjian, Eshmaiel / Jalull, Ghassan / Sadeghi-Pouya, Homayoon	Using waste materials and by-products to produce concrete paving blocks	270-275

Informations
sur cette fiche
IssueID
22556
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - février 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - février 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.