Construction and Building Materials - décembre 2014

Publié:	décembre 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Gesoǧlu, Mehmet / Güneyisi, Erhan / Khoshnaw, Ganjeena / İpek, Süleyman	Abrasion and freezing–thawing resistance of pervious concretes containing waste rubbers	19-24
Holmes, Niall / Browne, Alex / Montague, Christopher	Acoustic properties of concrete panels with crumb rubber as a fine aggregate replacement	195-204
Elipe, María G. M. / López-Querol, Susana	Aeolian sands: Characterization, options of improvement and possible employment in construction – The State-of-the-art	728-739
Bernat-Maso, Ernest / Gil, Lluís / Roca, Pere	Analytical method for the assessment of unreinforced brick masonry walls subjected to eccentric compressive loads	180-186
Gupta, Trilok / Chaudhary, Sandeep / Sharma, Ravi K.	Assessment of mechanical and durability properties of concrete containing waste rubber tire as fine aggregate	562-574
Navarro-Blasco, Í. / Pérez-Nicolás, M. / Fernández, J. M. / Duran, A. / Sirera, R. / Alvarez, J. I.	Assessment of the interaction of polycarboxylate superplasticizers in hydrated lime pastes modified with nanosilica or metakaolin as pozzolanic reactives	1-12
Wang, Fazhou / Li, Ming / Hu, Shuguang	Bond behavior of roughing FRP sheet bonded to concrete substrate	145-152
Trezos, Konstantinos G. / Sfikas, Ioannis P. / Orfanopoulos, Konstantinos	Bond of self-compacting concrete incorporating silica fume: Top-bar effect, effects of rebar distance from casting point and of rebar-to-concrete relative displacements during setting	378-390
Küçükyıldırım, E. / Uzal, B.	Characteristics of calcined natural zeolites for use in high-performance pozzolan blended cements	229-234
Nakanishi, Erika Y. / Frías, Moisés / Martínez-Ramírez, Sagrario / Santos, Sérgio F. / Rodrigues, Michelle S. / Rodríguez, Olga / Savastano, Holmer	Characterization and properties of elephant grass ashes as supplementary cementing material in pozzolan/Ca(OH)2 pastes	391-398
Garg, Mridul / Singh, L. P. / Maiti, Soumitra / Pundir, Aakanksha	Characterization of automobile effluent treatment plant sludge: Its utilization in construction materials	603-609
Latif, Eshrar / Ciupala, Mihaela Anca / Wijeyesekera, Devapriya Chitral	The comparative in situ hygrothermal performance of Hemp and Stone Wool insulations in vapour open timber frame wall panels	205-213
Trapko, Tomasz	Confined concrete elements with PBO-FRCM composites	332-338
Chaves, Luciano Pereira / Cunha, Jesiel	Design of carbon fiber reinforcement of concrete slabs using topology optimization	688-698
Yu, Kequan / Yu, Jiangtao / Lu, Zhoudao	Determination of residual fracture parameters of post-fire normal strength concrete Up to 600°C using an energy approach	610-617
Soetens, T. / Matthys, S.	Different methods to model the post-cracking behaviour of hooked-end steel fibre reinforced concrete	458-471
Du, Hongjian / Du, Suhuan / Liu, Xuemei	Durability performances of concrete with nano-silica	705-712
Söylev, T. A. / Özturan, T.	Durability, physical and mechanical properties of fiber-reinforced concretes at low-volume fraction	67-75
Nam, Boo Hyun / Yeon, Jung Heum / Behring, Zachary	Effect of daily temperature variations on the continuous deflection profiles of airfield jointed concrete pavements	261-270
Suleiman, A. R. / Soliman, A. M. / Nehdi, M. L.	Effect of surface treatment on durability of concrete exposed to physical sulfate attack	674-681
Valdés, Gonzalo / Miró, Rodrigo / Martínez, Adriana / Calabi, Alejandra	Effect of the physical properties of aggregates on aggregate-asphalt bond measured using the UCL method	399-406
Kocak, Yilmaz / Nas, Suna	The effect of using fly ash on the strength and hydration characteristics of blended cements	25-32
Ai, Demi / Zhu, Hongping / Luo, Hui / Yang, Jingwen	An effective electromechanical impedance technique for steel structural health monitoring	97-104
Dong, Xiaonan / Wang, Shoude / Gong, Chenchen / Lu, Lingchao	Effects of aggregate gradation and polymer modifiers on properties of cement-EPS/vitrified microsphere mortar	255-260
Wang, Yu / Wang, Qingsong / Sun, Jinhua / He, Linghui / Liew, K. M.	Effects of fixing point positions on thermal response of four point-supported glass façades	235-246
Puentes, Javier / Barluenga, Gonzalo / Palomar, Irene	Effects of nano-components on early age cracking of self-compacting concretes	89-96
Al-Mattarneh, Hashem	Electromagnetic quality control of steel fiber concrete	350-356
Moradi-Marani, Farid / Rivard, Patrice / Lamarche, Charles-Philippe / Kodjo, Serge Apedovi	Evaluating the damage in reinforced concrete slabs under bending test with the energy of ultrasonic waves	663-673
Lee, Seong-Hyeok / Lee, Jin-Wook / Park, Dae-Wook / Vo, Hai Viet	Evaluation of asphalt concrete mixtures for railway track	13-18
Ghabchi, Rouzbeh / Singh, Dharamveer / Zaman, Musharraf	Evaluation of moisture susceptibility of asphalt mixes containing RAP and different types of aggregates and asphalt binders using the surface free energy method	479-489
Salehian, Hamidreza / Barros, Joaquim A. O. / Taheri, Mahsa	Evaluation of the influence of post-cracking response of steel fibre reinforced concrete (SFRC) on load carrying capacity of SFRC panels	289-304
Correal, Juan F. / Echeverry, Juan S. / Ramirez, Fernando / Yamin, Luis E.	Experimental evaluation of physical and mechanical properties of Glued Laminated Guadua angustifolia Kunth	105-112
Spinella, Nino / Colajanni, Piero / Recupero, Antonino	Experimental in situ behaviour of unreinforced masonry elements retrofitted by pre-tensioned stainless steel ribbons	740-753
Youm, Kwang Soo / Jeong, Yeon Jong / Han, Erie Seong Ho / Yun, Tae Sup	Experimental investigation on annual changes in mechanical properties of structural concretes with various types of lightweight aggregates	442-451
Kolaitis, Dionysios I. / Asimakopoulou, Eleni K. / Founti, Maria A.	Fire protection of light and massive timber elements using gypsum plasterboards and wood based panels: A large-scale compartment fire test	163-170
Xiao, Jianzhuang / Tresserras, Joan / Tam, Vivian W. Y.	GFRP-tube confined RAC under axial and eccentric loading with and without expansive agent	575-585
Li, Wanzhao / van den Bulcke, Jan / Mannes, David / Lehmann, Eberhard / De Windt, Imke / Dierick, Manuel / Van Acker, Joris	Impact of internal structure on water-resistance of plywood studied using neutron radiography and X-ray tomography	171-179
Rakhimova, N. R. / Rakhimov, R. Z.	Individual and combined effects of Portland cement-based hydrated mortar components on alkali-activated slag cement	515-522
Jiang, Linhua / Liu, Hao / Chu, Hongqiang / Zhu, Chenglong / Xiong, Chuansheng / You, Lushen / Xu, Jinxia / Zhang, Yan / Qin, Yujiao	Influence of compression fatigue on chloride threshold value for the corrosion of steels in simulated concrete pore	699-704
Ramezanianpour, A. M. / Esmaeili, Kh. / Ghahari, S. A. / Ramezanianpour, A. A.	Influence of initial steam curing and different types of mineral additives on mechanical and durability properties of self-compacting concrete	187-194
Suwan, Teewara / Fan, Mizi	Influence of OPC replacement and manufacturing procedures on the properties of self-cured geopolymer	551-561
Mačiulaitis, Romualdas / Kerienė, Jadvyga / Yakovlev, Grigory / Kizinievič, Olga / Malaiškienė, Jurgita / Kizinievič, Viktor	Investigation of the possibilities to modify the building ceramics by utilising MWCNTs	153-162
Liu, Qiong / Tong, Teng / Liu, Shuhua / Yang, Dezhi / Yu, Qiang	Investigation of using hybrid recycled powder from demolished concrete solids and clay bricks as a pozzolanic supplement for cement	754-763
Yang, Chao / Lv, Xiaoxin / Tian, Xike / Wang, Yanxin / Komarneni, Sridhar	An investigation on the use of electrolytic manganese residue as filler in sulfur concrete	305-310
Matias, Gina / Faria, Paulina / Torres, Isabel	Lime mortars with ceramic wastes: Characterization of components and their influence on the mechanical behaviour	523-534
Matias, Gina / Faria, Paulina / Torres, Isabel	Lime mortars with heat treated clays and ceramic waste: A review	125-136
Chou, Jui-Sheng / Tsai, Chih-Fong / Pham, Anh-Duc / Lu, Yu-Hsin	Machine learning in concrete strength simulations: Multi-nation data analytics	771-780
Shang, Huai-shuai / Yang, Shu-tong / Niu, Xue-ying	Mechanical behavior of different types of concrete under multiaxial tension–compression	764-770
Zhang, Tongwei / Yue, Xibing / Deng, Yongfeng / Zhang, Dingwen / Liu, Songyu	Mechanical behaviour and micro-structure of cement-stabilised marine clay with a metakaolin agent	51-57
Fiorino, Luigi / Macillo, Vincenzo / Mazzolani, Federico Massimo	Mechanical behaviour of bolt-channel joining technology for aluminium structures	76-88
Feiteira Dias, J. L. / Picado-Santos, L. G. / Capitão, S. D.	Mechanical performance of dry process fine crumb rubber asphalt mixtures placed on the Portuguese road network	247-254
Abd. Aziz, Farah Nora Aznieta / Bida, Sani Mohammed / Nasir, Noor Azline Mohd. / Jaafar, Mohd Saleh	Mechanical properties of lightweight mortar modified with oil palm fruit fibre and tire crumb	544-550
Hu, Chuanlin	Microstructure and mechanical properties of fly ash blended cement pastes	618-625
Nguyen, Dang Hanh / Sebaibi, Nassim / Boutouil, Mohamed / Leleyter, Lydia / Baraud, Fabienne	A modified method for the design of pervious concrete mix	271-282
Jafarifar, Naeimeh / Pilakoutas, Kypros / Bennett, Terry	Moisture transport and drying shrinkage properties of steel–fibre-reinforced-concrete	41-50
Chuah, Samuel / Pan, Zhu / Sanjayan, Jay G. / Wang, Chien Ming / Duan, Wen Hui	Nano reinforced cement and concrete composites and new perspective from graphene oxide	113-124
Bao, Minxi / Liu, Xiaogen / Yang, Jian / Bao, Yiwang	Novel hybrid vacuum/triple glazing units with pressure equalisation design	645-651
Zhou, Jun / Yu, Dongxue / Shu, Zhu / Li, Tiantian / Chen, Yun / Wang, Yanxin	A novel Two-step Hydration Process of preparing cement-free non-fired bricks from waste phosphogypsum	222-228
Maruccio, Claudio / Basilio, Ismael / Oliveira, Daniel V. / Lourenço, Paulo B. / Monti, Giorgio	Numerical modelling and parametric analysis of bond strength of masonry members retrofitted with FRP	713-727
Faria, Duarte M. V. / Einpaul, Jürgen / Ramos, António M. P. / Ruiz, Miguel Fernández / Muttoni, Aurelio	On the efficiency of flat slabs strengthening against punching using externally bonded fibre reinforced polymers	366-377
Köfteci, Sevil / Ahmedzade, Perviz / Kultayev, Baurzhan	Performance evaluation of bitumen modified by various types of waste plastics	592-602
McConnell, E. / McPolin, D. / Taylor, S.	Post-tensioning of glulam timber with steel tendons	426-433
Ji, Yong-sheng / Wu, Meng / Tan, Zhongchao / Gao, Furong / Liu, Fang	Process control of reinforcement corrosion in concrete. Part 2: Time-dependent dominating factors under different environmental conditions	214-221
Ge, Zhi / Huang, Dawei / Sun, Renjuan / Gao, Zhili	Properties of plastic mortar made with recycled polyethylene terephthalate	682-687
Theodorakeas, Panagiotis / Avdelidis, Nicolas P. / Cheilakou, Eleni / Koui, Maria	Quantitative analysis of plastered mosaics by means of active infrared thermography	417-425
Chen, Zongwu / Wu, Shaopeng / Li, Fuzhou / Chen, Juyong / Qin, Zhehuan / Pang, Ling	Recycling of Flue Gas Desulfurization residues in gneiss based hot mix asphalt: Materials characterization and performances evaluation	137-144
Wang, Yu / Shao, Yixin / Matovic, Miodrag Darko / Whalen, Joann K.	Recycling of switchgrass combustion ash in cement: Characteristics and pozzolanic activity with chemical accelerators	472-478
Vignali, V. / Mazzotta, F. / Sangiorgi, C. / Simone, A. / Lantieri, C. / Dondi, G.	Rheological and 3D DEM characterization of potential rutting of cold bituminous mastics	339-349
Faleschini, Flora / Jiménez, Cristian / Barra, Marilda / Aponte, Diego / Vázquez, Enric / Pellegrino, Carlo	Rheology of fresh concretes with recycled aggregates	407-416
Ceylan, Halil / Kim, Sunghwan / Gopalakrishnan, Kasthurirangan / Schwartz, Charles W. / Li, Rui	Sensitivity analysis frameworks for mechanistic-empirical pavement design of continuously reinforced concrete pavements	498-508
Wang, Xin / Wang, Zihao / Wu, Zhishen / Cheng, Fang	Shear behavior of basalt fiber reinforced polymer (FRP) and hybrid FRP rods as shear resistance members	781-789
Yoo, Doo-Yeol / Min, Kyung-Hwan / Lee, Joo-Ha / Yoon, Young-Soo	Shrinkage and cracking of restrained ultra-high-performance fiber-reinforced concrete slabs at early age	357-365
Carneiro, José Ricardo / Almeida, Paulo Joaquim / de Lurdes Lopes, Maria	Some synergisms in the laboratory degradation of a polypropylene geotextile	586-591
Zimmermann, T. / Strauss, A. / Lehky, D. / Novák, Dahomír / Keršner, Z.	Stochastic fracture-mechanical characteristics of concrete based on experiments and inverse analysis	535-543
Ganesan, N. / Abraham, Ruby / Deepa Raj, S. / Sasi, Divya	Stress–strain behaviour of confined Geopolymer concrete	326-331
Hall, Matthew R. / Najim, Khalid Battal	Structural behaviour and durability of steel-reinforced structural Plain/Self-Compacting Rubberised Concrete (PRC/SCRC)	490-497
Xu, Shuqiang / Wang, Julin / Ma, Qinglin / Zhao, Xin / Zhang, Tao	Study on the lightweight hydraulic mortars designed by the use of diatomite as partial replacement of natural hydraulic lime and masonry waste as aggregate	33-40
Nuñez, Javier Yesid Mahecha / Inocente Domingos, Matheus David / Faxina, Adalberto Leandro	Susceptibility of low-density polyethylene and polyphosphoric acid-modified asphalt binders to rutting and fatigue cracking	509-514
Rahman, M. M. / Bassuoni, M. T.	Thaumasite sulfate attack on concrete: Mechanisms, influential factors and mitigation	652-662
Gilbert, Benoit P. / Hancock, Steven B. / Bailleres, Henri / Hjiaj, Mohammed	Thin-walled timber structures: An investigation	311-319
Hussain, Raja Rizwan / Alhozaimy, Abdulrahman / Al-Negheimish, Abdulaziz / Singh, D. D. N.	Time-dependent variation of the electrochemical impedance for thermo-mechanically treated versus plain low alloy steel rebars in contact with simulated concrete pore solution	283-288
El-Shimy, Y. N. / Amin, Sh. K. / EL-Sherbiny, S. A. / Abadir, M. F.	The use of cullet in the manufacture of vitrified clay pipes	452-457
Sengul, Ozkan	Use of electrical resistivity as an indicator for durability	434-441
Chu, Hongqiang / Jiang, Linhua / Xiong, Chuansheng / You, Lushen / Xu, Ning	Use of electrochemical method for repair of concrete cracks	58-66
Al-Jabri, K. / Shoukry, H.	Use of nano-structured waste materials for improving mechanical, physical and structural properties of cement mortar	636-644
Sangiorgi, Cesare / Tataranni, Piergiorgio / Simone, Andrea / Vignali, Valeria / Lantieri, Claudio / Dondi, Giulio	Waste bleaching clays as fillers in hot bituminous mixtures	320-325
Beycioğlu, Ahmet / Yılmaz Aruntaş, H.	Workability and mechanical properties of self-compacting concretes containing LLFA, GBFS and MC	626-635

Informations
sur cette fiche
IssueID
22549
Publié(e) le:
13.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - décembre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - décembre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.