Construction and Building Materials - mars 2014

Publié:	mars 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Dai, Qingli / Ng, Kenny	2D cohesive zone modeling of crack development in cementitious digital samples with microstructure characterization	584-595
Guo, Shenglai / Bu, Yuhuan / Liu, Huajie / Guo, Xinyang	The abnormal phenomenon of class G oil well cement endangering the cementing security in the presence of retarder	118-122
Delbono, Héctor Luis / Giudice, Carlos Alberto	Adherence in a pavement rehabilitated with a polymeric grid used as interlayer	454-459
Kanning, Rodrigo C. / Portella, Kleber F. / Bragança, Mariana O. G. P. / Bonato, Marcelle M. / dos Santos, Jeannette C. M.	Banana leaves ashes as pozzolan for concrete and mortar of Portland cement	460-465
Zhang, Xue / Dong, Wei / Zheng, Jian-Jun / Wu, Zhi-Min / Hu, Yu / Li, Qing-bin	Bond behavior of plain round bars embedded in concrete subjected to lateral tension	17-26
Mostofinejad, Davood / Moghaddas, Amirreza	Bond efficiency of EBR and EBROG methods in different flexural failure mechanisms of FRP strengthened RC beams	605-614
Barluenga, Gonzalo / Estirado, Fernando / Undurraga, Raimundo / Conde, Juan Felix / Agua, Fernando / Villegas, María Ángeles / García-Heras, Manuel	Brick masonry identification in a complex historic building, the Main College of the University of Alcalá, Madrid (Spain)	39-46
Haselbach, Liv / Thomas, Agathe	Carbon sequestration in concrete sidewalk samples	47-52
Hassan, Norhidayah Abdul / Airey, Gordon D. / Hainin, Mohd Rosli	Characterisation of micro-structural damage in asphalt mixtures using image analysis	27-38
Wang, Zhenjun / Wang, Qiong / Ai, Tao	Comparative study on effects of binders and curing ages on properties of cement emulsified asphalt mixture using gray correlation entropy analysis	615-622
Wei, Yang / Wu, Yu-Fei	Compression behavior of concrete columns confined by high strength steel wire	443-453
Bai, Fan / Yang, Xinhua / Zeng, Guowei	Creep and recovery behavior characterization of asphalt mixture in compression	504-511
Realfonzo, Roberto / Napoli, Annalisa / Ruiz Pinilla, Joaquín Guillermo	Cyclic behavior of RC beam-column joints strengthened with FRP systems	282-297
Han, Sun-Jin / Lee, Deuck Hang / Kim, Kang Su / Seo, Soo-Yeon / Moon, Juhyuk / Monteiro, Paulo J. M.	Degradation of flexural strength in reinforced concrete members caused by steel corrosion	572-583
Mazzotti, Claudio / Sassoni, Enrico / Pagliai, Giulia	Determination of shear strength of historic masonries by moderately destructive testing of masonry cores	421-431
Manso, Sandra / Mestres, Gemma / Ginebra, Maria Pau / De Belie, Nele / Segura, Ignacio / Aguado, Antonio	Development of a low pH cementitious material to enlarge bioreceptivity	485-495
Choi, Yoon Suk / Yi, Seong-Tae / Kim, Myung Yu / Jung, Woo Young / Yang, Eun Ik	Effect of corrosion method of the reinforcing bar on bond characteristics in reinforced concrete specimens	180-189
Kim, Yun Yong / Kim, Jin Man / Bang, Jin-Wook / Kwon, Seung-Jun	Effect of cover depth, w/c ratio, and crack width on half cell potential in cracked concrete exposed to salt sprayed condition	636-645
Bui, Quoc-Bao / Morel, Jean-Claude / Hans, Stéphane / Walker, Peter	Effect of moisture content on the mechanical characteristics of rammed earth	163-169
Mendoza, Oscar / Sierra, Germán / Tobón, Jorge I.	Effect of the reagglomeration process of multi-walled carbon nanotubes dispersions on the early activity of nanosilica in cement composites	550-557
Lav, M. Aysen / Lav, A. Hilmi	Effects of stabilization on resilient characteristics of fly ash as pavement material	10-16
Prieto, María Isabel / Cobo, Alfonso / Rodriguez, Ángel / González, María de las Nieves	The efficiency of surface-applied corrosion inhibitors as a method for the repassivation of corroded reinforcement bars embedded in ladle furnace slag mortars	70-77
Dong, Bi-qin / Qiu, Qi-wen / Xiang, Jia-qi / Huang, Can-jie / Xing, Feng / Han, Ning-Xu / Lu, You-yuan	Electrochemical impedance measurement and modeling analysis of the carbonation behavior for cementititous materials	558-565
Güneyisi, Erhan / Gesoǧlu, Mehmet / Mohamadameen, Alaa / Alzeebaree, Radhwan / Algin, Zeynep / Mermerdaş, Kasım	Enhancement of shrinkage behavior of lightweight aggregate concretes by shrinkage reducing admixture and fiber reinforcement	91-98
Ge, Zhesheng / Wang, Hao / Wang, Yangyang / Hu, Xiaoqian	Evaluating fatigue behavior of asphalt mixtures under alternate tension–compression loading model using new alternate biaxial splitting method	106-112
Shafabakhsh, Gh. / Mirabdolazimi, S. M. / Sadeghnejad, M.	Evaluation the effect of nano-TiO2 on the rutting and fatigue behavior of asphalt mixtures	566-571
Sonck, Delphine / Van Impe, Rudy / Belis, Jan	Experimental investigation of residual stresses in steel cellular and castellated members	512-519
Collette, Quentin / Sire, Stéphane / Vermes, William J. / Mesler, Vernon J. / Wouters, Ine	Experimental investigations on hot-driven structural rivets in historical French and Belgian wrought-iron structures (1880s–1890s)	258-269
Li, Yingyong / Liu, Shutang / Xue, Zhichao / Cao, Weidong	Experimental research on combined effects of flame retardant and warm mixture asphalt additive on asphalt binders and bituminous mixtures	533-540
Sheen, Yeong-Nain / Huang, Li-Jeng / Wang, Her-Yung / Le, Duc-Hien	Experimental study and strength formulation of soil-based controlled low-strength material containing stainless steel reducing slag	1-9
Cherki, Abou-bakr / Remy, Benjamin / Khabbazi, Abdelhamid / Jannot, Yves / Baillis, Dominique	Experimental thermal properties characterization of insulating cork–gypsum composite	202-209
Collodetti, Giovana / Gleize, Philippe J. P. / Monteiro, Paulo J. M.	Exploring the potential of siloxane surface modified nano-SiO2 to improve the Portland cement pastes hydration properties	99-105
Ye, Yong / Guo, Zixiong / Liu, Yang / Wang, Lan	Flexural behavior of stone beams reinforced with prestressed NSM CFRP bars	466-476
Pastor, J. M. / García, L. D. / Quintana, S. / Peña, J.	Glass reinforced concrete panels containing recycled tyres: Evaluation of the acoustic properties of for their use as sound barriers	541-549
Paul, Surajit Kumar / Rana, Pritam Kumar / Das, Debdulal / Chandra, Sanjay / Kundu, Saurabh	High and low cycle fatigue performance comparison between micro-alloyed and TMT rebar	170-179
Goudjil, N. / Djelal, C. / Vanhove, Y. / Kada, H. / Heloun, N.	Impact of temperature on the demoulding of concrete elements with a polarization process	402-412
Nath, Ranjit K. / Zain, M. F. M. / Kadhum, Abdul Amir H. / Kaish, A. B. M. A.	An investigation of LiNbO3 photocatalyst coating on concrete surface for improving indoor air quality	348-353
Muntohar, Agus Setyo / Rahman, Muhammad Ekhlasur	Lightweight masonry block from oil palm kernel shell	477-484
Aggarwal, Yogesh / Siddique, Rafat	Microstructure and properties of concrete using bottom ash and waste foundry sand as partial replacement of fine aggregates	210-223
Dondi, G. / Vignali, V. / Pettinari, M. / Mazzotta, F. / Simone, A. / Sangiorgi, C.	Modeling the DSR complex shear modulus of asphalt binder using 3D discrete element approach	236-246
Verstrynge, E. / Adriaens, R. / Elsen, J. / Van Balen, K.	Multi-scale analysis on the influence of moisture on the mechanical behavior of ferruginous sandstone	78-90
Grilo, J. / Faria, P. / Veiga, R. / Santos Silva, A. / Silva, V. / Velosa, A.	New natural hydraulic lime mortars – Physical and microstructural properties in different curing conditions	378-384
La Mendola, Lidia / Accardi, Matteo / Cucchiara, Calogero / Licata, Vincenzo	Nonlinear FE analysis of out-of-plane behaviour of masonry walls with and without CFRP reinforcement	190-196
Zhao, Jie / Zheng, Jian-Jun / Peng, Gai-Fei	A numerical method for predicting Young's modulus of heated cement paste	197-201
Sawsen, Chafei / Fouzia, Khadraoui / Mohamed, Boutouil / Moussa, Gomina	Optimizing the formulation of flax fiber-reinforced cement composites	659-664
Vyšvařil, Martin / Bayer, Patrik / Chromá, Markéta / Rovnaníková, Pavla	Physico-mechanical and microstructural properties of rehydrated blended cement pastes	413-420
Farhidzadeh, Alireza / Dehghan-Niri, Ehsan / Zhong, Zilan / Salamone, Salvatore / Aref, Amjad / Filiatrault, Andre	Post-earthquake evaluation of pipelines rehabilitated with cured in place lining technology using acoustic emission	326-338
Yu, Bo / Yang, Lufeng / Wu, Ming / Li, Bing	Practical model for predicting corrosion rate of steel reinforcement in concrete structures	385-401
Biligiri, Krishna Prapoorna / Way, George Bert	Predicted E* dynamic moduli of the Arizona mixes using asphalt binders placed over a 25-year period	520-532
Fang, Changqing / Liu, Pei / Yu, Ruien / Liu, Xiaolong	Preparation process to affect stability in waste polyethylene-modified bitumen	320-325
Yiqiu, Tan / Haipeng, Wang / Shaojun, Ma / Huining, Xu	Quality control of asphalt pavement compaction using fibre Bragg grating sensing technology	53-59
Salguero, F. / Grande, J. A. / Valente, T. / Garrido, R. / de la Torre, M. L. / Fortes, J. C. / Sánchez, A.	Recycling of manganese gangue materials from waste-dumps in the Iberian Pyrite Belt – Application as filler for concrete production	363-368
Moundoungou, I. / Bulteel, D. / Garcia-Diaz, E. / Thiéry, V. / Dégrugilliers, P. / Hammerschlag, J. G.	Reduction of ASR expansion in concretes based on reactive chert aggregates: Effect of alkali neutralisation capacity	147-162
Chen, Dar Hao	Repairs of longitudinal joint separations and their performances	496-503
Wu, Yaopeng / Wu, Bo	Residual compressive strength and freeze–thaw resistance of ordinary concrete after high temperature	596-604
Yu, Kequan / Lu, Zhoudao	Residual crack extension resistance of post-fire wedge-splitting normal strength concrete specimen based on the cohesive force function	270-281
Shu, Fengyuan / Lv, Yaohui / Liu, Yuxin / Xu, Fujia / Sun, Zhe / He, Peng / Xu, Binshi	Residual stress modeling of narrow gap welded joint of aluminum alloy by cold metal transferring procedure	224-235
Franzoni, Elisa	Rising damp removal from historical masonries: A still open challenge	123-136
Ruano, Gonzalo / Isla, Facundo / Isas Pedraza, Rodrigo / Sfer, Domingo / Luccioni, Bibiana	Shear retrofitting of reinforced concrete beams with steel fiber reinforced concrete	646-658
Goñi, S. / Frías, M. / Vegas, I. / García, R.	Sodium sulphate effect on the mineralogy of ternary blended cements elaborated with activated paper sludge and fly ash	313-319
Yoon, Seyoon / Monteiro, Paulo J. M. / Macphee, Donald E. / Glasser, Fredrik P. / Imbabi, Mohammed Salah-Eldin	Statistical evaluation of the mechanical properties of high-volume class F fly ash concretes	432-442
He, Zhen-jun / Zhang, Jia-xing	Strength characteristics and failure criterion of plain recycled aggregate concrete under triaxial stress states	354-362
Kadam, Sachin B. / Singh, Yogendra / Li, Bing	Strengthening of unreinforced masonry using welded wire mesh and micro-concrete – Behaviour under in-plane action	247-257
Rababeh, Shaher / Al Qablan, Husam / Abu-Khafajah, Shatha / El-Mashaleh, Mohammad	Structural utilization of wooden beams as anti-seismic and stabilising techniques in stone masonry in Qasr el-Bint, Petra, Jordan	60-69
Aliha, M. R. M. / Behbahani, H. / Fazaeli, H. / Rezaifar, M. H.	Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures	623-635
Behl, Ambika / Sharma, Girish / Kumar, Gajendra	A sustainable approach: Utilization of waste PVC in asphalting of roads	113-117
Gastaldini, A. L. G. / da Silva, M. P. / Zamberlan, F. B. / Mostardeiro Neto, C. Z.	Total shrinkage, chloride penetration, and compressive strength of concretes that contain clear-colored rice husk ash	369-377
Qasrawi, Hisham	The use of steel slag aggregate to enhance the mechanical properties of recycled aggregate concrete and retain the environment	298-304
Abiola, O. S. / Kupolati, W. K. / Sadiku, E. R. / Ndambuki, J. M.	Utilisation of natural fibre as modifier in bituminous mixes: A review	305-312
Chen, Xuemei / Yan, Yun / Liu, Yuanzheng / Hu, Zhihua	Utilization of circulating fluidized bed fly ash for the preparation of foam concrete	137-146
Zhang, Tongsheng / Gao, Peng / Luo, Ruifeng / Wei, Jiangxiong / Yu, Qijun	Volumetric deformation of gap-graded blended cement pastes with large amount of supplementary cementitious materials	339-347

Informations
sur cette fiche
IssueID
22525
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mars 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mars 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.