Construction and Building Materials - décembre 2012

Publié:	décembre 2012

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Stéphan, Pierre / Salin, Jean	Ageing management of concrete structure: Assessment of EDF methodology in comparison with SHM and AIEA guides	924-933
Naser, M. / Abu-Lebdeh, G. / Hawileh, R.	Analysis of RC T-beams strengthened with CFRP plates under fire loading using ANN	301-309
Shan, Liyan / Tan, Yiqiu / Kim, Y. Richard	Applicability of the Cox–Merz relationship for asphalt binder	716-722
Cid-Falceto, Jaime / Mazarrón, Fernando R. / Cañas, Ignacio	Assessment of compressed earth blocks made in Spain: International durability tests	738-745
Başyiğit, Celalettin / Çomak, Bekir / Kılınçarslan, Şemsettin / Serkan Üncü, İsmail	Assessment of concrete compressive strength by image processing technique	526-532
Fayyadh, Moatasem M. / Razak, Hashim Abdul	Assessment of effectiveness of CFRP repaired RC beams under different damage levels based on flexural stiffness	125-134
Alih, S. / Khelil, A.	Behavior of inoxydable steel and their performance as reinforcement bars in concrete beam: Experimental and nonlinear finite element analysis	481-492
Dagher, Habib J. / Bannon, Daniel J. / Davids, William G. / Lopez-Anido, Roberto A. / Nagy, Edwin / Goslin, Keenan	Bending behavior of concrete-filled tubular FRP arches for bridge structures	432-439
Ali, Majid / Gultom, Ronald Jansen / Chouw, Nawawi	Capacity of innovative interlocking blocks under monotonic loading	812-821
Agavriloaie, Leon / Oprea, Stefan / Barbuta, Marinela / Luca, Florentina	Characterisation of polymer concrete with epoxy polyurethane acryl matrix	190-196
Kundu, Sarada Prasad / Chakraborty, Sumit / Roy, Aparna / Adhikari, Basudam / Majumder, S. B.	Chemically modified jute fibre reinforced non-pressure (NP) concrete pipes with improved mechanical properties	841-850
Ferrara, Liberato / Bamonte, Patrick / Caverzan, Alessio / Musa, Abdisa / Şanal, İrem	A comprehensive methodology to test the performance of Steel Fibre Reinforced Self-Compacting Concrete (SFR-SCC)	406-424
Garg, Mridul / Pundir, Aakanksha	Comprehensive study of fly ash binder developed with fly ash – alpha gypsum plaster – Portland cement	758-765
Sbartaï, Zoubir Mehdi / Laurens, Stéphane / Elachachi, Sidi Mohammed / Payan, Cédric	Concrete properties evaluation by statistical fusion of NDT techniques	943-950
Zhao, Yanqing / Tang, Jimin / Liu, Hui	Construction of triaxial dynamic modulus master curve for asphalt mixtures	21-26
Binici, Hanifi / Aksogan, Orhan / Durgun, Muhammed Yasin	Corrosion of basaltic pumice, colemanite, barite and blast furnace slag coated rebars in concretes	629-637
Dehwah, H. A. F.	Corrosion resistance of self-compacting concrete incorporating quarry dust powder, silica fume and fly ash	277-282
Celauro, Bernardo / Celauro, Clara / Lo Presti, Davide / Bevilacqua, Antonio	Definition of a laboratory optimization protocol for road bitumen improved with recycled tire rubber	562-572
Kim, Kwang Yeom / Yun, Tae Sup / Choo, Jinhyun / Kang, Dong Hun / Shin, Hyu Soung	Determination of air-void parameters of hardened cement-based materials using X-ray computed tomography	93-101
de Melo, João Victor Staub / Trichês, Glicério / Gleize, Philippe Jean Paul / Villena, Joe	Development and evaluation of the efficiency of photocatalytic pavement blocks in the laboratory and after one year in the field	310-319
Vololonirina, Oly / Sellier, Alain / Arliguie, Ginette	Development and validation of a numerical model to predict the penetration of a glycerophosphate-based corrosion inhibitor through concrete	541-547
Xu, Qinwu / Chang, George K. / Gallivan, Victor L.	Development of a systematic method for intelligent compaction data analysis and management	470-480
Benmeddour, Farouk / Villain, Géraldine / Abraham, Odile / Choinska, Marta	Development of an ultrasonic experimental device to characterise concrete for structural repair	934-942
Villain, Géraldine / Sbartaï, Zoubir Mehdi / Dérobert, Xavier / Garnier, Vincent / Balayssac, Jean-Paul	Durability diagnosis of a concrete structure in a tidal zone by combining NDT methods: Laboratory tests and case study	893-903
Kanellopoulos, Antonios / Petrou, Michael F. / Ioannou, Ioannis	Durability performance of self-compacting concrete	320-325
Latif Al-Mufti, R. / Fried, A. N.	The early age non-destructive testing of concrete made with recycled concrete aggregate	379-386
Zheng, Haibing / Li, Weihua / Ma, Fubin / Kong, Qinglin	The effect of a surface-applied corrosion inhibitor on the durability of concrete	36-40
Zhu, Qiao / Jiang, Linhua / Chen, Yi / Xu, Jinxia / Mo, Lili	Effect of chloride salt type on chloride binding behavior of concrete	512-517
Vejmelková, Eva / Koňáková, Dana / Čáchová, Monika / Keppert, Martin / Černý, Robert	Effect of hydrophobization on the properties of lime–metakaolin plasters	556-561
Gentilini, Cristina / Franzoni, Elisa / Bandini, Simone / Nobile, Lucio	Effect of salt crystallisation on the shear behaviour of masonry walls: An experimental study	181-189
Santos, Dinis S. / Santos, Pedro M. D. / Dias-da-Costa, Daniel	Effect of surface preparation and bonding agent on the concrete-to-concrete interface strength	102-110
Ahmed, Eman I. / Hesp, Simon A. M. / Paul Samy, Senthil Kumar / Rubab, Syed D. / Warburton, George	Effect of warm mix additives and dispersants on asphalt rheological, aging, and failure properties	493-498
Bessa, Iuri S. / Castelo Branco, Verônica T. F. / Soares, Jorge B.	Evaluation of different digital image processing software for aggregates and hot mix asphalt characterizations	370-378
Premrov, Miroslav / Dobrila, Peter	Experimental analysis of timber–concrete composite beam strengthened with carbon fibres	499-506
Khorsandnia, Nima / Valipour, Hamid R. / Crews, Keith	Experimental and analytical investigation of short-term behaviour of LVL–concrete composite connections and beams	229-238
Callewaert, D. / Belis, J. / Delincé, D. / Van Impe, R.	Experimental stiffness characterisation of glass/ionomer laminates for structural applications	685-692
Hassan, A. M. T. / Jones, S. W. / Mahmud, G. H.	Experimental test methods to determine the uniaxial tensile and compressive behaviour of ultra high performance fibre reinforced concrete (UHPFRC)	874-882
Altwair, Nurdeen M. / Johari, M. A. Megat / Saiyid Hashim, S. F.	Flexural performance of green engineered cementitious composites containing high volume of palm oil fuel ash	518-525
Attari, N. / Amziane, S. / Chemrouk, M.	Flexural strengthening of concrete beams using CFRP, GFRP and hybrid FRP sheets	746-757
Caggiano, Antonio / Cremona, Marco / Faella, Ciro / Lima, Carmine / Martinelli, Enzo	Fracture behavior of concrete beams reinforced with mixed long/short steel fibers	832-840
Gesoǧlu, Mehmet / Güneyisi, Erhan / Kocabağ, Mustafa E. / Bayram, Veysel / Mermerdaş, Kasım	Fresh and hardened characteristics of self compacting concretes made with combined use of marble powder, limestone filler, and fly ash	160-170
Medina, C. / Frías, M. / Sánchez de Rojas, M. I. / Thomas, C. / Polanco, J. A.	Gas permeability in concrete containing recycled ceramic sanitary ware aggregate	597-605
Sathya Narayanan, J. / Ramamurthy, K.	Identification of set-accelerator for enhancing the productivity of foam concrete block manufacture	144-152
Bonati, Alice / Merusi, Filippo / Polacco, Giovanni / Filippi, Sara / Giuliani, Felice	Ignitability and thermal stability of asphalt binders and mastics for flexible pavements in highway tunnels	660-668
Faustino, Jorge / Pereira, Luís / Soares, Salviano / Cruz, Daniel / Paiva, Anabela / Varum, Humberto / Ferreira, José / Pinto, Jorge	Impact sound insulation technique using corn cob particleboard	153-159
Michel, Marie / Georgin, Jean-François / Ambroise, Jean	Improving the mechanical performance of high-grade slag cement by the addition of Portland cement and sulfoaluminate cement	291-300
Chahal, Navneet / Siddique, Rafat / Rajor, Anita	Influence of bacteria on the compressive strength, water absorption and rapid chloride permeability of concrete incorporating silica fume	645-651
Uysal, Mucteba	The influence of coarse aggregate type on mechanical properties of fly ash additive self-compacting concrete	533-540
El-Didamony, H. / Heikal, Mohamed / Abd El Aleem, S.	Influence of delayed addition time of sodium sulfanilate phenol formaldehyde condensate on the hydration characteristics of sulfate resisting cement pastes containing silica fume	269-276
Van Tittelboom, Kim / Gruyaert, Elke / Rahier, Hubert / De Belie, Nele	Influence of mix composition on the extent of autogenous crack healing by continued hydration or calcium carbonate formation	349-359
Kong, Deyu / Du, Xiangfei / Wei, Su / Zhang, Hua / Yang, Yang / Shah, Surendra P.	Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials	707-715
Cheewaket, T. / Jaturapitakkul, C. / Chalee, W.	Initial corrosion presented by chloride threshold penetration of concrete up to 10 year-results under marine site	693-698
Brovelli, Claudio / Crispino, Maurizio	Investigation into cold recycled materials: Influence of rejuvenant, mix design procedure and effects of temperature on compaction	507-511
MacMullen, James / Zhang, Zhongyi / Radulovic, Jovana / Dhakal, Hom Nath / Bennett, Nick	An investigation of hydroxyl end-terminated polydimethylsiloxane (PDMS) in exterior oil-in-water (O/W) emulsion treatments	283-290
Alhozaimy, Abdulrahman / Hussain, Raja Rizwan / Al-Zaid, Rajeh / Al Negheimish, Abdulaziz	Investigation of severe corrosion observed at intersection points of steel rebar mesh in reinforced concrete construction	67-81
Yi-qiu, Tan / Lei, Zhang / Meng, Guo / Li-yan, Shan	Investigation of the deformation properties of asphalt mixtures with DIC technique	581-590
Awad, Ziad K. / Aravinthan, Thiru / Zhuge, Yan	Investigation of the free vibration behaviour of an innovative GFRP sandwich floor panel	209-219
Asli, Hallizza / Ahmadinia, Esmaeil / Zargar, Majid / Karim, Mohamed Rehan	Investigation on physical properties of waste cooking oil – Rejuvenated bitumen binder	398-405
Sohrabian, Babak / Ozcelik, Yilmaz	Joint simulation of a building stone deposit using minimum/maximum autocorrelation factors	257-268
Mo, Liantong / Li, Xun / Fang, Xing / Huurman, M. / Wu, Shaopeng	Laboratory investigation of compaction characteristics and performance of warm mix asphalt containing chemical additives	239-247
Lin, Juntao / Guo, Peida / Wan, Li / Wu, Shaopeng	Laboratory investigation of rejuvenator seal materials on performances of asphalt mixtures	41-45
Hassanpour, Mahmoud / Shafigh, Payam / Mahmud, Hilmi Bin	Lightweight aggregate concrete fiber reinforcement – A review	452-461
Wetzel, A. / Zurbriggen, R. / Herwegh, M. / Greminger, A. / Kaufmann, J.	Long-term study on failure mechanisms of exterior applied tilings	335-348
Son, Seung-wan / Yeon, Jung Heum	Mechanical properties of acrylic polymer concrete containing methacrylic acid as an additive	669-679
Xiao, Feipeng / Amirkhanian, Serji N. / Juang, C. Hsein / Hu, Shaowei / Shen, Junan	Model developments of long-term aged asphalt binders	248-256
Glé, Philippe / Gourdon, Emmanuel / Arnaud, Laurent	Modelling of the acoustical properties of hemp particles	801-811
Magallanes-Rivera, R. X. / Juarez-Alvarado, C. A. / Valdez, P. / Mendoza-Rangel, J. M.	Modified gypsum compounds: An ecological–economical choice to improve traditional plasters	591-596
Allison, P. G. / Moser, R. D. / Weiss, C. A. / Malone, P. G. / Morefield, S. W.	Nanomechanical and chemical characterization of the interface between concrete, glass–ceramic bonding enamel and reinforcing steel	638-644
Van Rompu, J. / Di Benedetto, H. / Buannic, M. / Gallet, T. / Ruot, C.	New fatigue test on bituminous binders: Experimental results and modeling	197-208
Abraham, O. / Piwakowski, B. / Villain, G. / Durand, O.	Non-contact, automated surface wave measurements for the mechanical characterisation of concrete	904-915
Huang, Qinghua / Jiang, Zhilu / Zhang, Weiping / Gu, Xianglin / Dou, Xiaojing	Numerical analysis of the effect of coarse aggregate distribution on concrete carbonation	27-35
Navaro, Julien / Bruneau, Denis / Drouadaine, Ivan / Colin, Johan / Dony, Anne / Cournet, Jérôme	Observation and evaluation of the degree of blending of reclaimed asphalt concretes using microscopy image analysis	135-143
Liew, Y. M. / Kamarudin, H. / Mustafa Al Bakri, A. M. / Bnhussain, M. / Luqman, M. / Khairul Nizar, I. / Ruzaidi, C. M. / Heah, C. Y.	Optimization of solids-to-liquid and alkali activator ratios of calcined kaolin geopolymeric powder	440-451
Carlier, J.-Ph. / Rougelot, Th. / Burlion, N.	Performance evaluation of models describing sorption isotherm in cementitious materials between saturation and oven dryness	58-66
Cerni, G. / Cardone, F. / Bocci, M.	Permanent deformation behaviour of unbound recycled mixtures	573-580
Acevedo-Martinez, E. / Gomez-Zamorano, L. Y. / Escalante-García, J. I.	Portland cement-blast furnace slag mortars activated using waterglass: – Part 1: Effect of slag replacement and alkali concentration	462-469
Martínez-Lage, Isabel / Martínez-Abella, Fernando / Vázquez-Herrero, Cristina / Pérez-Ordóñez, Juan Luis	Properties of plain concrete made with mixed recycled coarse aggregate	171-176
Schoefs, Franck / Abraham, Odile / Popovics, John S.	Quantitative evaluation of contactless impact echo for non-destructive assessment of void detection within tendon ducts	885-892
Henault, J.-M. / Quiertant, M. / Delepine-Lesoille, S. / Salin, J. / Moreau, G. / Taillade, F. / Benzarti, K.	Quantitative strain measurement and crack detection in RC structures using a truly distributed fiber optic sensing system	916-923
La Iglesia, A. / La Iglesia, V. M. / Fajardo, S. / Gómez, P. P. / Bastidas, J. M.	Reaction between sodium monofluorophosphate and portlandite and impact on steel reinforcement corrosion inhibition	46-50
Stazi, F. / Mugianesi, E. / Munafò, P.	Recommendation for restoration of Modern buildings with stone cladding and steel windows: A multi-disciplinary approach on a significant case study	728-737
Onuaguluchi, Obinna / Eren, Ozgur	Recycling of copper tailings as an additive in cement mortars	723-727
Onoue, Kozo / Matsushita, Hiromichi	Reduction mechanisms of fatigue strength of concrete under compression due to permeation of liquids	82-92
Bilodeau, Jean-Pascal / Doré, Guy	Relating resilient behaviour of compacted unbound base granular materials to matrix and interlock characteristics	220-228
Arsenovic, Milica / Radojevic, Zagorka / Stankovic, Slavka	Removal of toxic metals from industrial sludge by fixing in brick structure	7-14
Realfonzo, Roberto / Napoli, Annalisa	Results from cyclic tests on high aspect ratio RC columns strengthened with FRP systems	606-620
Quagliarini, Enrico / Bondioli, Federica / Goffredo, Giovanni Battista / Cordoni, Caterina / Munafò, Placido	Self-cleaning and de-polluting stone surfaces: TiO 2 nanoparticles for limestone	51-57
Luccioni, Bibiana / Ruano, Gonzalo / Isla, Facundo / Zerbino, Raul / Giaccio, Graciela	A simple approach to model SFRC	111-124
Radfar, Sahar / Foret, Gilles / Saeedi, Navid / Sab, Karam	Simulation of concrete cover separation failure in FRP plated RC beams	791-800
Reis, J. M. L.	Sisal fiber polymer mortar composites: Introductory fracture mechanics approach	177-180
Rahmani, Tara / Kiani, Behnam / Shekarchi, Mohammad / Safari, Abdollah	Statistical and experimental analysis on the behavior of fiber reinforced concretes subjected to drop weight test	360-369
Golzar, Karim / Jalali-Arani, Azam / Nematollahi, Mahsa	Statistical investigation on physical–mechanical properties of base and polymer modified bitumen using Artificial Neural Network	822-831
Ammar, Yahia / Kamal, Khayat H. / Mohammed, Sayed	Statistical modelling of the coupled effect of mix design and rebar spacing on restricted flow characteristics of SCC	699-706
Li, Xuerun / Huang, Hong / Xu, Jie / Ma, Suhua / Shen, Xiaodong	Statistical research on phase formation and modification of alite polymorphs in cement clinker with SO 3 and MgO	548-555
Lee, Bang Yeon / Cho, Chang-Geun / Lim, Hyun-Jin / Song, Jin-Kyu / Yang, Keun-Hyeok / Li, Victor C.	Strain hardening fiber reinforced alkali-activated mortar – A feasibility study	15-20
Hyun, Sang-Hoon / Yeon, Jung Heum	Strength development characteristics of UP-MMA based polymer concrete with different curing temperature	387-397
Mermerdaş, Kasım / Gesoǧlu, Mehmet / Güneyisi, Erhan / Özturan, Turan	Strength development of concretes incorporated with metakaolin and different types of calcined kaolins	766-774
Güler, Kadir / Demir, Fuat / Pakdamar, Ferhat	Stress–strain modelling of high strength concrete by fuzzy logic approach	680-684
Ozawa, Mitsuo / Uchida, Shinya / Kamada, Toshiro / Morimoto, Hiroaki	Study of mechanisms of explosive spalling in high-strength concrete at high temperatures using acoustic emission	621-628
Häkkinen, Tarja	Systematic method for the sustainability analysis of refurbishment concepts of exterior walls	783-790
Alavez-Ramirez, R. / Chiñas-Castillo, F. / Morales-Dominguez, V. J. / Ortiz-Guzman, M.	Thermal conductivity of coconut fibre filled ferrocement sandwich panels	425-431
Liu, Yu / You, Zhanping / Zhao, Yang	Three-dimensional discrete element modeling of asphalt concrete: Size effects of elements	775-782
Dellinghausen, L. M. / Gastaldini, A. L. G. / Vanzin, F. J. / Veiga, K. K.	Total shrinkage, oxygen permeability, and chloride ion penetration in concrete made with white Portland cement and blast-furnace slag	652-659
Del Caño, Alfredo / Gómez, Diego / de la Cruz, M. Pilar	Uncertainty analysis in the sustainable design of concrete structures: A probabilistic method	865-873
Dvorkin, L. / Bezusyak, A. / Lushnikova, N. / Ribakov, Y.	Using mathematical modeling for design of self compacting high strength concrete with metakaolin admixture	851-864
Turk, Kazim	Viscosity and hardened properties of self-compacting mortars with binary and ternary cementitious blends of fly ash and silica fume	326-334
Benzerzour, Mahfoud / Sebaibi, Nassim / Abriak, Nor Edine / Binetruy, Christophe	Waste fibre–cement matrix bond characteristics improved by using silane-treated fibres	1-6

Informations
sur cette fiche
IssueID
22503
Publié(e) le:
13.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - décembre 2012

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - décembre 2012

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.