Construction and Building Materials - novembre 2012

Publié:	novembre 2012

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Karaca, Z. / Gunes Yilmaz, N. / Goktan, R. M.	Abrasion wear characterization of some selected stone flooring materials with respect to contact load	520-526
Živica, Vladimir / Palou, Martin T. / Krizma, Martin / Bagel, Lubomir	Acidic attack of cement based materials under the common action of high, ambient temperature and pressure	623-629
Zerbino, R. / Giaccio, G. / Batic, O. R. / Isaia, G. C.	Alkali–silica reaction in mortars and concretes incorporating natural rice husk ash	796-806
Cui, H. Z. / Lo, Tommy Yiu / Memon, Shazim Ali / Xing, F. / Shi, Xue-fei	Analytical model for compressive strength, elastic modulus and peak strain of structural lightweight aggregate concrete	1036-1043
Botella, R. / Pérez-Jiménez, F. E. / Miró, R.	Application of a strain sweep test to assess fatigue behavior of asphalt binders	906-912
Solla, Mercedes / González-Jorge, Higinio / Álvarez, Marcos X. / Arias, Pedro	Application of non-destructive geomatic techniques and FDTD modeling to metrical analysis of stone blocks in a masonry wall	14-19
Wan, Keshu / Li, Yan / Sun, Wei	Application of tomography for solid calcium distributions in calcium leaching cement paste	913-917
Pacheco-Torgal, F. / Ding, Y. / Miraldo, S. / Abdollahnejad, Z. / Labrincha, J. A.	Are geopolymers more suitable than Portland cement to produce high volume recycled aggregates HPC?	1048-1052
La Rubia-García, M. Dolores / Yebra-Rodríguez, África / Eliche-Quesada, Dolores / Corpas-Iglesias, Francisco A. / López-Galindo, Alberto	Assessment of olive mill solid residue (pomace) as an additive in lightweight brick production	495-500
Röhm, Constanze / Novák, Balthasar / Sasmal, Saptarshi / Karusala, Ramanjaneyulu / Srinivas, Voggu	Behaviour of fibre reinforced beam-column sub-assemblages under reversed cyclic loading	319-329
Volland, S. / Vereshchagin, V.	Cellular glass ceramic materials on the basis of zeolitic rock	940-946
Fan, Mizi / Ndikontar, Maurice Kor / Zhou, Xiangming / Ngamveng, Joseph Noah	Cement-bonded composites made from tropical woods: Compatibility of wood and cement	135-140
Li, Xiang-guo / Chen, Quan-bin / Huang, Kuai-zhong / Ma, Bao-Guo / Wu, Bei	Cementitious properties and hydration mechanism of circulating fluidized bed combustion (CFBC) desulfurization ashes	182-187
Kim, Yail J. / Hossain, Mozahid / Yoshitake, Isamu	Cold region durability of a two-part epoxy adhesive in double-lap shear joints: Experiment and model development	295-304
Corinaldesi, Valeria	Combined effect of expansive, shrinkage reducing and hydrophobic admixtures for durable self compacting concrete	758-764
Nageim, Hassan Al / Al-Busaltan, Shakir Falih / Atherton, William / Sharples, George	A comparative study for improving the mechanical properties of cold bituminous emulsion mixtures with cement and waste materials	743-748
Gruber, I. / Zinovik, I. / Holzer, L. / Flisch, A. / Poulikakos, L. D.	A computational study of the effect of structural anisotropy of porous asphalt on hydraulic conductivity	66-77
Briffaut, Matthieu / Benboudjema, Farid / Torrenti, Jean-Michel / Nahas, Georges	Concrete early age basic creep: Experiments and test of rheological modelling approaches	373-380
Arel, Hasan Şahan / Yazici, Şemsi	Concrete–reinforcement bond in different concrete classes	78-83
Zeng, Xiaohui / Xie, Youjun / Deng, Dehua	Conductivity behavior of the fresh CA mortar and its relationship with the fluidity properties	890-894
Atahan, Ali O. / Yücel, Ayhan Öner	Crumb rubber in concrete: Static and dynamic evaluation	617-622
Kazem Sharbatdar, M. / Kheyroddin, A. / Emami, E.	Cyclic performance of retrofitted reinforced concrete beam–column joints using steel prop	287-294
Yang, Ding-yi / Luo, Jing-jing	The damage of concrete under flexural loading and salt solution	129-134
Valiente, Andrés / Iordachescu, Mihaela	Damage tolerance of cold drawn ferritic–austenitic stainless steels wires for prestressed concrete	874-880
Cubel, Francisco / Mas, Ángeles / Vercher, Jose / Gil, Enrique	Design and construction recommendations for brick enclosures with continuous air chamber	151-164
Mounier, Damien / Di Benedetto, Hervé / Sauzéat, Cédric	Determination of bituminous mixtures linear properties using ultrasonic wave propagation	638-647
Ghanem, Hassan / Zollinger, Dan / Lytton, Robert / Ghanem, Noha	Determining ASR characteristics using dilatometer method	1008-1015
Bederina, M. / Gotteicha, M. / Belhadj, B. / Dheily, R. M. / Khenfer, M. M. / Queneudec, M.	Drying shrinkage studies of wood sand concrete – Effect of different wood treatments	1066-1075
Yao, Yuan / Sun, Henghu	Durability and leaching analysis of a cementitious material composed of high volume coal combustion byproducts	97-103
Matos, Ana Mafalda / Sousa-Coutinho, Joana	Durability of mortar using waste glass powder as cement replacement	205-215
Patsikas, N. / Katsiotis, N. / Pipilikaki, P. / Papageorgiou, D. / Chaniotakis, E. / Beazi-Katsioti, M.	Durability of mortars of white cement against sulfate attack in elevated temperatures	1082-1089
Pan, Zhu / Sanjayan, Jay G. / Kong, Daniel L. Y.	Effect of aggregate size on spalling of geopolymer and Portland cement concretes subjected to elevated temperatures	365-372
Tosun-Felekoğlu, Kamile	The effect of C3A content on sulfate durability of Portland limestone cement mortars	437-447
Tiamiyu, A. O. / Ibitoye, S. A.	Effect of clay addition on service properties of a developed OPF–CNSL–formaldehyde roofing material	358-364
Alamshahi, Vajihollah / Taeb, Abbas / Ghaffarzadeh, Reza / Rezaee, Mohammad Amin	Effect of composition and length of PP and polyester fibres on mechanical properties of cement based composites	534-537
Lin, Kae-Long / Shiu, Hau-Shing / Shie, Je-Lueng / Cheng, Ta-Wui / Hwang, Chao-Lung	Effect of composition on characteristics of thin film transistor liquid crystal display (TFT-LCD) waste glass-metakaolin-based geopolymers	501-507
Sajedi, Fathollah	Effect of curing regime and temperature on the compressive strength of cement-slag mortars	549-556
Branco, M. / Guerreiro, L. / Mahesh, K. K. / Braz Fernandes, F. M.	Effect of load cycling on the phase transformations in Ni–Ti wires for civil engineering applications	508-519
Kusbiantoro, Andri / Nuruddin, Muhd Fadhil / Shafiq, Nasir / Qazi, Sobia Anwar	The effect of microwave incinerated rice husk ash on the compressive and bond strength of fly ash based geopolymer concrete	695-703
Khaleel, O. R. / Abdul Razak, H.	The effect of powder type on the setting time and self compactability of mortar	20-26
Zákoutský, Jan / Tydlitát, Vratislav / Černý, Robert	Effect of temperature on the early-stage hydration characteristics of Portland cement: A large-volume calorimetric study	969-976
Villamizar, María Catalina Niño / Araque, Vanessa Spinosi / Reyes, Carlos Alberto Ríos / Silva, Reinaldo Sandoval	Effect of the addition of coal-ash and cassava peels on the engineering properties of compressed earth blocks	276-286
He, Tingshu / Shi, Chen / Li, Guoxin / Song, Xuefeng	Effects of superplasticizers on the carbonation resistance of C3S and C3A hydration products	954-959
Cui, H. Z. / Lo, Tommy Yiu / Memon, Shazim Ali / Xing, F. / Shi, Xue-fei	Experimental investigation and development of analytical model for pre-peak stress–strain curve of structural lightweight aggregate concrete	845-859
Collet, Florence / Pretot, Sylvie	Experimental investigation of moisture buffering capacity of sprayed hemp concrete	58-65
O'Loinsigh, C. / Oudjene, M. / Ait-Aider, H. / Fanning, P. / Pizzi, A. / Shotton, E. / Meghlat, E.-M.	Experimental study of timber-to-timber composite beam using welded-through wood dowels	245-250
Celauro, C. / Fecarotti, C. / Pirrotta, A. / Collop, A. C.	Experimental validation of a fractional model for creep/recovery testing of asphalt mixtures	458-466
Ibrahim, Rahel Kh. / Hamid, R. / Taha, M. R.	Fire resistance of high-volume fly ash mortars with nanosilica addition	779-786
Pan, Tongyan	A first-principles based chemophysical environment for studying lignins as an asphalt antioxidant	654-664
Cattaneo, Sara / Giussani, Francesca / Mola, Franco	Flexural behaviour of reinforced, prestressed and composite self-consolidating concrete beams	826-837
Soutsos, M. N. / Le, T. T. / Lampropoulos, A. P.	Flexural performance of fibre reinforced concrete made with steel and synthetic fibres	704-710
Shannag, M. J. / Mourad, S. M.	Flowable high strength cementitious matrices for ferrocement applications	933-939
Yan, Zhi-guo / Zhu, He-hua / Ju, J. Woody / Ding, Wen-qi	Full-scale fire tests of RC metro shield TBM tunnel linings	484-494
Cárdenas, Carolina / Tobón, Jorge I. / García, Claudia / Vila, Jaume	Functionalized building materials: Photocatalytic abatement of NOx by cement pastes blended with TiO2 nanoparticles	820-825
Rahman, M. M. / Usman, M. / Al-Ghalib, Ali A.	Fundamental properties of rubber modified self-compacting concrete (RMSCC)	630-637
Gouny, F. / Fouchal, F. / Maillard, P. / Rossignol, S.	A geopolymer mortar for wood and earth structures	188-195
Diab, Ahmed M. / Awad, Abd Elwahab M. / Elyamany, Hafez E. / Abd Elmoaty, Abd Elmoaty M.	Guidelines in compressive strength assessment of concrete modified with silica fume due to magnesium sulfate attack	311-318
Khodaii, A. / Kazemi Tehrani, H. / Haghshenas, H. F.	Hydrated lime effect on moisture susceptibility of warm mix asphalt	165-170
Kumar, Mukesh / Singh, S. K. / Singh, N. P. / Singh, N. B.	Hydration of multicomponent composite cement: OPC-FA-SF-MK	681-686
Subalakshmi, Palani / Saraswathy, Velu / Sivasankaran, Shyamala Kumari	Hydraulicity of mineral admixtures in cement blends	648-653
Shea, Andy / Lawrence, Mike / Walker, Pete	Hygrothermal performance of an experimental hemp–lime building	270-275
Kim, H. K. / Hwang, E. A. / Lee, H. K.	Impacts of metakaolin on lightweight concrete by type of fine aggregate	719-726
Aflaki, Sassan / Hajikarimi, Pouria	Implementing viscoelastic rheological methods to evaluate low temperature performance of modified asphalt binders	110-118
Kaish, A. B. M. A. / Alam, M. R. / Jamil, M. / Zain, M. F. M. / Wahed, M. A.	Improved ferrocement jacketing for restrengthening of square RC short column	228-237
Martínez-Echevarría, María José / Recasens, Rodrigo Miró / del Carmen Rubio Gámez, María / Ondina, Antonio Menéndez	In-laboratory compaction procedure for cold recycled mixes with bituminous emulsions	918-924
Ismail, Najif / Ingham, Jason M.	In-situ and laboratory based out-of-plane testing of unreinforced clay brick masonry walls strengthened using near surface mounted twisted steel bars	119-128
Braga, Mariana / de Brito, Jorge / Veiga, Rosário	Incorporation of fine concrete aggregates in mortars	960-968
Ferreira, Luís / de Brito, Jorge / Saikia, Nabajyoti	Influence of curing conditions on the mechanical performance of concrete containing recycled plastic aggregate	196-204
Duan, Ping / Shui, Zhonghe / Chen, Wei / Shen, Chunhua	Influence of metakaolin on pore structure-related properties and thermodynamic stability of hydrate phases of concrete in seawater environment	947-953
Wu, Shengxing / Chen, Xudong / Zhou, Jikai	Influence of strain rate and water content on mechanical behavior of dam concrete	448-457
Ameri, Mahmoud / Mansourian, Ahmad / Sheikhmotevali, Amir Hossein	Investigating effects of ethylene vinyl acetate and gilsonite modifiers upon performance of base bitumen using Superpave tests methodology	1001-1007
Yi-qiu, Tan / Lei, Zhang / Xing-you, Zhang	Investigation of low-temperature properties of diatomite-modified asphalt mixtures	787-795
Yi-qiu, Tan / Lei, Zhang / Wei-qiang, Gong / Meng, Guo	Investigation of the effects of wax additive on the properties of asphalt binder	578-584
Serin, Sercan / Morova, Nihat / Saltan, Mehmet / Terzi, Serdal	Investigation of usability of steel fibers in asphalt concrete mixtures	238-244
Akbulut, Hüseyin / Gürer, Cahit / Çetin, Sedat / Elmacı, Ayfer	Investigation of using granite sludge as filler in bituminous hot mixtures	430-436
Barbera, Giovanni / Barone, Germana / Mazzoleni, Paolo / Scandurra, Anastasia	Laboratory measurement of ultrasound velocity during accelerated aging tests: Implication for the determination of limestone durability	977-983
Ban Cheah, Chee / Ramli, Mahyuddin	Load capacity and crack development characteristics of HCWA–DSF high strength mortar ferrocement panels in flexure	348-357
Baldino, Noemi / Gabriele, Domenico / Oliviero Rossi, Cesare / Seta, Lucia / Lupi, Francesca R. / Caputo, Paolino	Low temperature rheology of polyphosphoric acid (PPA) added bitumen	592-596
Jo, Byung-Wan / Choi, Ji-Sun / Yoon, Kwang-Won / Park, Jung-Hoon	Material characteristics of zeolite cement mortar	1059-1065
Tayeh, Bassam A. / Bakar, B. H. Abu / Johari, M. A. Megat / Voo, Yen Lei	Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay	538-548
Aslani, Farhad / Nejadi, Shami	Mechanical properties of conventional and self-compacting concrete: An analytical study	330-347
Chuanfeng, Zheng / Dajun, Zhao / Nailiang, Xiang / Zhenfeng, Song	Mechanism of low-temperature adhesion failure in asphalt mixtures with dense-suspension and void-skeleton structures	711-718
Mokhtari, Ali / Nejad, Fereidoon Moghadas	Mechanistic approach for fiber and polymer modified SMA mixtures	381-390
Neves, R. / Branco, F. A. / de Brito, J.	A method for the use of accelerated carbonation tests in durability design	585-591
Tobón, J. I. / Payá, J. J. / Borrachero, M. V. / Restrepo, O. J.	Mineralogical evolution of Portland cement blended with silica nanoparticles and its effect on mechanical strength	736-742
Mathew, George / Paul, Mathews M.	Mix design methodology for laterized self compacting concrete and its behaviour at elevated temperature	104-109
Ye, Hailong / Jin, Nanguo / Jin, Xianyu / Fu, Chuanqing	Model of chloride penetration into cracked concrete subject to drying–wetting cycles	259-269
Koniorczyk, Marcin / Gawin, Dariusz	Modelling of salt crystallization in building materials with microstructure – Poromechanical approach	860-873
Bian, Lichun / Wang, Qing / Meng, Deliang / Li, Huijian	A modified micro-mechanics model for estimating effective elastic modulus of concrete	572-577
Pease, Brad J. / Scheffler, Gregor A. / Janssen, Hans	Monitoring moisture movements in building materials using X-ray attenuation: Influence of beam-hardening of polychromatic X-ray photon beams	419-429
Poulikakos, L. D. / Partl, M. N.	A multi-scale fundamental investigation of moisture induced deterioration of porous asphalt concrete	1025-1035
Peralta, Joana / Silva, Hugo M. R. D. / Hilliou, Loic / Machado, Ana V. / Pais, Jorge / Williams, R. Christopher	Mutual changes in bitumen and rubber related to the production of asphalt rubber binders	557-565
Ferrier, E. / Si Larbi, A. / Georgin, J.-F. / Ambroise, J.	New hybrid cement-based composite material externally bonded to control RC beam cracking	36-45
Celebi, E. / Göktepe, F.	Non-linear 2-D FE analysis for the assessment of isolation performance of wave impeding barrier in reduction of railway-induced surface waves	1-13
Zuo, Xiao-Bao / Sun, Wei / Yu, Cheng	Numerical investigation on expansive volume strain in concrete subjected to sulfate attack	404-410
Pacheco Torgal, F. / Miraldo, S. / Labrincha, J. A. / de Brito, J.	An overview on concrete carbonation in the context of eco-efficient construction: Evaluation, use of SCMs and/or RAC	141-150
Pacheco-Torgal, F. / Abdollahnejad, Z. / Miraldo, S. / Baklouti, S. / Ding, Y.	An overview on the potential of geopolymers for concrete infrastructure rehabilitation	1053-1058
Brouwers, H. J. H.	Paste models for hydrating calcium sulfates, using the approach by Powers and Brownyard	1044-1047
Garcez, N. / Lopes, N. / de Brito, J. / Sá, G.	Pathology, diagnosis and repair of pitched roofs with ceramic tiles: Statistical characterisation and lessons learned from inspections	807-819
Capitão, S. D. / Picado-Santos, L. G. / Martinho, F.	Pavement engineering materials: Review on the use of warm-mix asphalt	1016-1024
Ahmadinia, Esmaeil / Zargar, Majid / Karim, Mohamed Rehan / Abdelaziz, Mahrez / Ahmadinia, Ebrahim	Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt	984-989
Golafshani, Emadaldin Mohammadi / Rahai, Alireza / Sebt, Mohammad Hassan / Akbarpour, Hamed	Prediction of bond strength of spliced steel bars in concrete using artificial neural network and fuzzy logic	411-418
Ahmadi-Nedushan, Behrouz	Prediction of elastic modulus of normal and high strength concrete using ANFIS and optimal nonlinear regression models	665-673
Jacinto, Luciano / Pipa, Manuel / Neves, Luis A. C. / Santos, Luís Oliveira	Probabilistic models for mechanical properties of prestressing strands	84-89
Said, A. M. / Zeidan, M. S. / Bassuoni, M. T. / Tian, Y.	Properties of concrete incorporating nano-silica	838-844
Kou, Shi-Cong / Poon, Chi-Sun / Wan, Hui-Wen	Properties of concrete prepared with low-grade recycled aggregates	881-889
Kou, Shi-Cong / Zhan, Bao-Jian / Poon, Chi-Sun	Properties of partition wall blocks prepared with fresh concrete wastes	566-571
Tsukagoshi, Masayuki / Miyauchi, Hiroyuki / Tanaka, Kyoji	Protective performance of polyurethane waterproofing membrane against carbonation in cracked areas of mortar substrate	895-905
Wei, Yongqi / Yao, Wu / Xing, Xiaoming / Wu, Manjian	Quantitative evaluation of hydrated cement modified by silica fume using QXRD, 27Al MAS NMR, TG–DSC and selective dissolution techniques	925-932
Xie, Jun / Wu, Shaopeng / Lin, Juntao / Cai, Jun / Chen, Zongwu / Wei, Wei	Recycling of basic oxygen furnace slag in asphalt mixture: Material characterization & moisture damage investigation	467-474
Reale, Tara / O'Connor, Alan	A review and comparative analysis of corrosion-induced time to first crack models	475-483
Maalej, M. / Quek, S. T. / Ahmed, S. F. U. / Zhang, J. / Lin, V. W. J. / Leong, K. S.	Review of potential structural applications of hybrid fiber Engineered Cementitious Composites	216-227
Romagnoli, Marcello / Leonelli, Cristina / Kamse, Elie / Lassinantti Gualtieri, Magdalena	Rheology of geopolymer by DOE approach	251-258
Jalali, Meysam / Kazem Sharbatdar, M. / Chen, Jian-Fei / Alaee, Farshid Jandaghi	Shear strengthening of RC beams using innovative manually made NSM FRP bars	990-1000
Abdollahi, B. / Bakhshi, M. / Mirzaee, Z. / Shekarchi, M. / Motavalli, M.	SIFCON strengthening of concrete cylinders in comparison with conventional GFRP confinement method	765-778
Cristelo, Nuno / Glendinning, Stephanie / Miranda, Tiago / Oliveira, Daniel / Silva, Rui	Soil stabilisation using alkaline activation of fly ash for self compacting rammed earth construction	727-735
Miranda, Luís Filipe / Rio, João / Guedes, João Miranda / Costa, Aníbal	Sonic Impact Method – A new technique for characterization of stone masonry walls	27-35
Isaia, G. C. / Furquim, P. / Gastaldini, A. L. G.	A statistical approach of binary and ternary concrete mixtures with mineral additions	597-603
Centonze, G. / Leone, M. / Aiello, M. A.	Steel fibers from waste tires as reinforcement in concrete: A mechanical characterization	46-57
Makhloufi, Z. / Kadri, E. H. / Bouhicha, M. / Benaissa, A. / Bennacer, R.	The strength of limestone mortars with quaternary binders: Leaching effect by demineralized water	171-181
Basterra, L. A. / Acuña, L. / Casado, M. / Lopez, G. / Bueno, A.	Strength testing of Poplar duo beams, Populus x euramericana (Dode) Guinier cv. I-214, with fibre reinforcement	90-96
Liu, Feng / Chen, Guixuan / Li, Lijuan / Guo, Yongchan	Study of impact performance of rubber reinforced concrete	604-616
Kawashima, Shiho / Kim, Jae Hong / Corr, David J. / Shah, Surendra P.	Study of the mechanisms underlying the fresh-state response of cementitious materials modified with nanoclays	749-757
Rong, Hui / Qian, Chun-xiang / Li, Long-zhi	Study on microstructure and properties of sandstone cemented by microbe cement	687-694
Skaropoulou, A. / Kakali, G. / Tsivilis, S.	Thaumasite form of sulfate attack in limestone cement concrete: The effect of cement composition, sand type and exposure temperature	527-533
Giraldo, C. / Tobón, J. I. / Restrepo Baena, O. J.	Ultramarine blue pigment: A non-conventional pozzolan	305-310
Soutsos, Marios N. / Tang, Kangkang / Millard, Stephen G.	The use of recycled demolition aggregate in precast concrete products – Phase III: Concrete pavement flags	674-680
Zhu, Yu / Yang, Yingzi / Yao, Yan	Use of slag to improve mechanical properties of engineered cementitious composites (ECCs) with high volumes of fly ash	1076-1081
Schoon, Joris / van der Heyden, Luc / Eloy, Pierre / Gaigneux, Eric M. / De Buysser, Klaartje / Van Driessche, Isabel / De Belie, Nele	Waste fibrecement: An interesting alternative raw material for a sustainable Portland clinker production	391-403

Informations
sur cette fiche
IssueID
22502
Publié(e) le:
16.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - novembre 2012

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - novembre 2012

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.